Setup internal DNS server using DNSMasq on OMV server

readme

# This is for a home network
# My OMV server is: 10.0.0.99
# I kept DHCP running on my router for simplicity

# Install dnsmasq
apt-get install dnsmasq

# Edit the configuration file
nano /etc/dnsmasq.conf

  # append the following to the end - change the "home.mydyndns.org" to the name you want to provide internally
  # add additional hosts as additional "address" lines in this configuration

      address=/home.mydyndns.org/10.0.0.99
      resolv-file=/etc/resolv.dnsmasq
      listen-address=10.0.0.99
      listen-address=127.0.0.1
      bind-interfaces

# create the following file
nano /etc/resolv.dnsmasq 
  # add the following lines
  # note these are the DNS servers for OPenDNS.  If you are not using openDNS
  # add the DNS address of your ISP
      208.67.222.222
      208.67.220.220


# Configurate the DNS setting on your router to 10.0.0.99 in this case
# This will tell the clients on your network to use your newly creaet DNS server for resolving
# names first.  This allows you to use the same name both inside and outside your network.
# When inside your network, your DNS server will serve up your private IP address.  When outside
# your network, the public DNS servers will continue to work as expected.

Thank you!!