lovesegfault

(chroot) livecd / # emerge --depclean -a

 * Always study the list of packages to be cleaned for any obvious
 * mistakes. Packages that are part of the world set will always
 * be kept.  They can be manually added to this set with
 * `emerge --noreplace <atom>`.  Packages that are listed in
 * package.provided (see portage(5)) will be removed by
 * depclean, even if they are part of the world set.
 * 
 * As a safety measure, depclean will not remove any packages

lovesegfault

{ stdenv
, buildFHSUserEnv
, fetchurl
, lib
, rpmextract
, writeShellScript
}:
let
  pname = "hqplayerd";

lovesegfault

struct Solution;

#[derive(Debug, PartialEq, Eq)]
pub struct TreeNode {
    pub val: i32,
    pub left: Option<Rc<RefCell<TreeNode>>>,
    pub right: Option<Rc<RefCell<TreeNode>>>,
}

impl TreeNode {

lovesegfault

[pi3]
kernel=u-boot-rpi3.bin

[pi4]
kernel=u-boot-rpi4.bin
enable_gic=1
armstub=armstub8-gic.bin

# Otherwise the resolution will be weird in most cases, compared to
# what the pi3 firmware does by default.

lovesegfault

self: super: {
  pypy3 = (super.pypy3.override {
    packageOverrides = _: pySuper: {
      psycopg2 = pySuper.psycopg2.overrideAttrs (_: { disabled = false; });
    };
  }).overrideAttrs (oldAttrs: {
    meta.platforms = oldAttrs.meta.platforms ++ [ "aarch64-linux" ];
  });

  octoprint = super.octoprint.override { python3 = self.pypy3; };

lovesegfault

  pool: tank
 state: ONLINE
status: One or more devices has experienced an unrecoverable error.  An
	attempt was made to correct the error.  Applications are unaffected.
action: Determine if the device needs to be replaced, and clear the errors
	using 'zpool clear' or replace the device with 'zpool replace'.
   see: http://zfsonlinux.org/msg/ZFS-8000-9P
  scan: scrub in progress since Tue Oct 13 22:33:18 2020
	1.99T scanned at 27.1G/s, 79.7G issued at 1.06G/s, 1.99T total
	44K repaired, 3.92% done, 0 days 00:30:40 to go

lovesegfault

[pi3]
kernel=u-boot-rpi3.bin

[pi4]
kernel=u-boot-rpi4.bin
enable_gic=1
armstub=armstub8-gic.bin

# Otherwise the resolution will be weird in most cases, compared to
# what the pi3 firmware does by default.

lovesegfault

[pi3]
kernel=u-boot-rpi3.bin

[pi4]
kernel=u-boot-rpi4.bin
enable_gic=1
armstub=armstub8-gic.bin

# Otherwise the resolution will be weird in most cases, compared to
# what the pi3 firmware does by default.

lovesegfault

[root@aurelius:/home/bemeurer]# cat /sys/kernel/debug/pinctrl/*.gpio-pinctrl-bcm2835/pins
registered pins: 54
pin 0 (gpio0) function alt2 in hi; irq 0 (none)
pin 1 (gpio1) function alt2 in hi; irq 0 (none)
pin 2 (gpio2) function alt2 in hi; irq 0 (none)
pin 3 (gpio3) function alt2 in hi; irq 0 (none)
pin 4 (gpio4) function alt2 in lo; irq 0 (none)
pin 5 (gpio5) function alt2 in lo; irq 0 (none)
pin 6 (gpio6) function alt2 in lo; irq 0 (none)
pin 7 (gpio7) function alt2 in lo; irq 0 (none)

lovesegfault

int get_rpi_info(rpi_info *info)
{
   FILE *fp;
   char buffer[1024];
   char hardware[1024];
   char revision[1024];
   int found = 0;
   int len;

   if ((fp = fopen("/proc/device-tree/system/linux,revision", "r"))) {