lpcvoid · November 10, 2019 13:17
diff --git a/safert12.txt b/safert12.txt
 I recently bought a KSGER T12 iron due to its good reviews. The PCB itself is already pretty good, but I did two things additionally.

 #Adding a ground connection to the case

 If using a connector with ground capabilities (which should be standard for metal cased and not double insulated devices such as this), the device grounds the tip for ESD safety. The case is not grounded though, so I recommend a small modification.

 #Increase isolation distance between heatsink and trace

 As title suggests, I cut away a small part of the heatsink for the mosfet, so there's a larger distance to the live trace.
	I recently bought a KSGER T12 iron due to its good reviews. The PCB itself is already pretty good, but I did two things additionally.

	#Adding a ground connection to the case

	If using a connector with ground capabilities (which should be standard for metal cased and not double insulated devices such as this), the device grounds the tip for ESD safety. The case is not grounded though, so I recommend a small modification.

	#Increase isolation distance between heatsink and trace

	As title suggests, I cut away a small part of the heatsink for the mosfet, so there's a larger distance to the live trace.