sick idrac7

gistfile1.txt

[SH7757 /flash]$ reboot
/etc/sysapps_script/avct_reboot.sh: line 44: can't create /flash/data0/date_tmp: Read-only file system
Wait for pending config changes ...
Done
cp: can't stat '/flash/data0/cv/avctpasswd': No such file or directory
cp: can't stat '/flash/data0/cv/avctpasswd_new_done': No such file or directory
/etc/sysapps_script/avct_reboot.sh: line 80: can't create /flash/data0/aim/persistent/os_str_main_cert_path: nonexistent directory
/etc/sysapps_script/avct_reboot.sh: line 81: can't create /flash/data0/aim/persistent/os_str_main_key_path: nonexistent directory

 watchdog_shutdown2 SIGINT ..killall: AppMonitor: no process killed
Killed
process '-/bin/sh' (pid 551) exited. Scheduling for restart.
Umount loop devices
Umount filesystem
umount: can't umount /etc: Device or resource busy
umount: can't umount /dev: Device or resource busy
umount: can't umount /tmp: Device or resource busy
umount: can't umount /dev/pts: Invalid argument
reboot -f
Restarting system.


U-Boot 2009.08-00088-g121cddc (Nov 17 2014 - 05:50:46) Avocent (0.0.3) EVB, Build: jenkins-idrac-yocto-release-505

CPU: SH-4A
BOARD: R0P7757LC00xxRL (C0 step) board
BOOT: Secure, HRK not generated
DRAM:  240MB
  (240MB of 256MB total DRAM is available on U-Boot)
ENV:   Using primary env area.
In:    serial
Out:   serial
Err:   serial
WDT2:  Booted Lower Vector, 'uboot1'
sh_mmcif: 0, sh-sdhi: 1
Net:   sh_eth.0, sh_g_eth.0
INFO: 00:002 Start-up -to- util_idrac_main()
INFO: 00:005 U-Boot 2009.08-00088-g121cddc (Nov 17 2014 - 05:50:46) Avocent (0.0.3) EVB
INFO: 00:008 U-Boot checkin date(05-10-2013) Version(1.0.183)
INFO: 00:006 iDRAC PPID <NULL>
INFO: 00:003 SPI NOR init 4096 KiB N25Q032 bus=0 cs=0, speed=1000000, mode=3
INFO: 00:007 SH-4A Product: Major Ver=0x31  Minor Ver=0x14 C4 Little endian
             Family=0x10    Major Ver=0x30  Minor Ver=0x0b
PASS: 00:015 Dedicated monolithic mgmt NIC disabled
INFO: 00:129 BCM54610 OUI=0x3fffff  Model=0x3f  Revision=0x0f PhyAddr=1
INFO: 00:006 SD CARD: is not found
INFO: 00:042 EMMC:   Device: sh_mmcif   Manufacturer ID: 90   OEM: 14a
             Name: HYNIX   Tran Speed: 25000000   Rd Block Len: 512
             MMC version 4.0   High Capacity: Yes   Capacity: 0
INFO: 00:019 CPLD: Major Ver=0x1  Minor Ver=0x0  Maint Ver=0x3
             Planar: Type=0x02  Rev=0x8  Rework=0x0  Scratch/PathRetry=0x00
PASS: 00:013 Coin cell detected good,  AD=0x3a8 low water=0x2c1
PASS: 00:008 PCIe C0 Ver=0.15 MCTP en, CRC=0x8e9b6875 @0x8efbf954 cnt=0x18000
INFO: 00:007 Init PCIe mailbox(PCIe 0xFFEE0150=0x40010000)
INFO: 00:006 mode=normal 
INFO: 00:002 reset_cause=board 
PASS: 00:005 Booted Lower Vector, 'uboot1' wdt2cnt=0
INFO: 00:005 wdt0cnt=2
PASS: 00:002 SMR0 no sermux env, default 0xd4
INFO: 00:004 GRACR=0x3c HISEL=0x00 SIRQCR5_D=0x03 SIRQCR6_D=0x01 LADMSK0=0xff2
             MRSTCR0=0xfedffe7f MRSTCR1=0xfff3ff0f MRSTCR2=0x7f80feff
             BARMAP=0x1 BCR=0x85000000 NCER=0x01fc NCMCR=0x0006 NCCSR=0x0303
PASS: 00:022 etherc0=F0:1F:AF:D2:24:4C
             getherc0=F0:1F:AF:D2:24:4D
INFO: 00:007 Fan logic is not modified on Non-AC power up
INFO: 00:052 Env and backup CRC'ed ok
*** no text signature found ***
INFO: 00:647 Sync eMMC/SPI NOR/Alternate u-boot images
PASS: 00:075 Current u-boot1 1.0.183 verified with 'ubootN'
             Trailer Struct - Missing start token, exp=0xc0de1111 rec=0x0
INFO: 00:013 Verify OS Images N: ENV FWN is missing
PASS: 00:005 Boot device=emmc  Boot partition1/N
             Boot Path Retry:P1/N=0 P5/N-1=0
INFO: 00:000 01:123


WDT2: Disabled
Initialization complete, proceed with boot
OS_WDT0_EN:180 seconds,  Re-load ILRAM:
Boot Path Retry:P1/N=0 P5/N-1=0
Copying kernel image ... OK
## Booting kernel from Legacy Image at 88000000 ...
   Image Name:   sh-linux
   Image Type:   SuperH Linux Kernel Image (gzip compressed)
   Data Size:    2545045 Bytes =  2.4 MB
   Load Address: 80001000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
WDT2: Disable in do_bootm_linux()
sh_eth_init

Monolithic/DRB
init started: BusyBox v1.18.4 (2014-11-17 05:25:30 CST)
starting pid 409, tty '': '/etc/init.d/rcS'
waitfor: pid 409 ...
setting net.ipv6.conf.default.accept_dad based on kernel bootup option
enable normal accept DAD for ipv6
Sat Jan 1 00:00:01 UTC 2000 To execute command __source /etc/sysapps_script/I_1000_mountfs.sh__
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1001_trigwdt.sh__
<========= Start H/W watchdog first... =========>
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1100_nfs.sh__
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1105_ps.sh__
XXXXXX /dev/mmcblk0p11
/dev/mmcblk0p11: recovering journal
fsck.ext3: Attempt to read block from filesystem resulted in short read while trying to re-open /dev/mmcblk0p11
e2fsck: io manager magic bad!
e2fsck 1.41.14 (22-Dec-2010)
fsck.ext3: Attempt to read block from filesystem resulted in short read while trying to open /dev/mmcblk0p11
Could this be a zero-length partition?
mount: mounting /dev/mmcblk0p11 on /flash/data0 failed: Invalid argument
mounting private storage fail, formatting partition
/etc/init.d/rcS: /etc/sysapps_script/I_1105_ps.sh: line 29: mkfs.ext3: Input/output error
tune2fs 1.41.14 (22-Dec-2010)
tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /dev/mmcblk0p11
Couldn't find valid filesystem superblock.
mount: mounting /dev/mmcblk0p11 on /flash/data0 failed: Invalid argument
Sat Jan 1 00:00:03 UTC 2000 To execute command __source /etc/sysapps_script/I_1106_clear_ps.sh__
mkdir: can't create directory '/flash/data0/oem_ps': Read-only file system
Sat Jan 1 00:00:03 UTC 2000 To execute command __source /etc/sysapps_script/I_1150_SYS_Drv.sh__
insmod: read error from '/lib/modules/aess_eventhandlerdrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_eventhandlerdrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_kcsdrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_kcsdrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_biospostdrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_biospostdrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_gpiodrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_gpiodrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_sgpiodrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_sgpiodrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_dynairqdrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_dynairqdrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_i2c_hwctrldrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_i2c_hwctrldrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_i2cdrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_i2cdrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_pecisensordrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_pecisensordrv.ko': Input/output error
insmod: read error from '/lib/modules/cryptodev.ko': Input/output error
insmod: can't insert '/lib/modules/cryptodev.ko': Input/output error
insmod: read error from '/lib/modules/sh_tsip.ko': Input/output error
insmod: can't insert '/lib/modules/sh_tsip.ko': Input/output error
insmod: read error from '/lib/modules/aess_fansensordrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_fansensordrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_pwmdrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_pwmdrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_timerdrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_timerdrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_adcsensordrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_adcsensordrv.ko': Input/output error
insmod: read error from '/lib/modules/VKCSDriver.ko': Input/output error
insmod: can't insert '/lib/modules/VKCSDriver.ko': Input/output error
insmod: read error from '/lib/modules/aess_memdrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_memdrv.ko': Input/output error
Sat Jan 1 00:00:05 UTC 2000 To execute command __source /etc/sysapps_script/I_1151_SYS_Drv.sh__
insmod: read error from '/lib/modules/aess_spi1drv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_spi1drv.ko': Input/output error
insmod: read error from '/lib/modules/dell_cplddrv.ko': Input/output error
insmod: can't insert '/lib/modules/dell_cplddrv.ko': Input/output error
insmod: read error from '/lib/modules/aess_rspidrv.ko': Input/output error
insmod: can't insert '/lib/modules/aess_rspidrv.ko': Input/output error
insmod: read error from '/lib/modules/dell_fpdrv.ko': Input/output error
insmod: can't insert '/lib/modules/dell_fpdrv.ko': Input/output error
insmod: read error from '/lib/modules/dell_eerspidrv.ko': Input/output error
insmod: can't insert '/lib/modules/dell_eerspidrv.ko': Input/output error
insmod: read error from '/lib/modules/sh_pbi.ko': Input/output error
insmod: can't insert '/lib/modules/sh_pbi.ko': Input/output error
Sat Jan 1 00:00:05 UTC 2000 To execute command __source /etc/sysapps_script/I_1170_mknode.sh__
Sat Jan 1 00:00:06 UTC 2000 To execute command __/etc/sysapps_script/config_lib_init.sh__
mounting Platform Data 1 partition
mount: mounting /dev/mmcblk0p9 on /tmp/pd0/ failed: Input/output error
/etc/sysapps_script/config_lib_init.sh: line 28: /etc/default/ipmi/getsysid: not found
/etc/sysapps_script/config_lib_init.sh: line 36: shmwrite: Input/output error
mkdir: can't create directory '/flash/data0/config/': Read-only file system
/etc/sysapps_script/config_lib_init.sh: cd: line 46: can't cd to /flash/data0/config/
ln: ./lmcfg.txt: Read-only file system
ln: ./platcfggrp.txt: Read-only file system
ln: ./platcfgfld.txt: Read-only file system
ln: ./cfgfld.txt: Read-only file system
ln: ./cfggrp.txt: Read-only file system
ln: ./gencfggrp.txt: Read-only file system
ln: ./gencfgfld.txt: Read-only file system
ln: ./nonpmaltdefaults.txt: Read-only file system
ln: ./altdefaults.txt: Read-only file system
/etc/sysapps_script/network_defaults_init.sh: line 29: /etc/default/ipmi/getsysid: not found
MemAccess: error while loading shared libraries: libmemaccess.so.1: cannot open shared object file: Input/output error
cp: can't stat '/tmp/pd0/network_config/Orca/iDRACnet.default': No such file or directory
cp: can't stat '/tmp/pd0/network_config/Orca/NICSelection.sh': No such file or directory
Sat Jan 1 00:00:06 UTC 2000 To execute command __source /etc/sysapps_script/I_1160_OSINET.sh__
MemAccess: error while loading shared libraries: libmemaccess.so.1: cannot open shared object file: Input/output error
/etc/sysapps_script/eth1_init.sh: line 33: /tmp/pd0/ipmi/getsysid: not found
6.79 0.01
Sat Jan 1 00:00:06 UTC 2000 To execute command __source /etc/sysapps_script/I_1200_etc_defaults.sh__
cp: can't create '/flash/data0/etc/hosts': Read-only file system
mkdir: can't create directory '/flash/data0/sysconfig': Read-only file system
mkdir: can't create directory '/flash/data0/ipsec': Read-only file system
cp: can't create '/flash/data0/etc/hosts': Read-only file system
Sat Jan 1 00:00:06 UTC 2000 To execute command __source /etc/sysapps_script/I_1210_sysklog_syslogd.sh__
/etc/init.d/rcS: /etc/sysapps_script/I_1210_sysklog_syslogd.sh: line 16: /etc/sysapps_script/syslog.sh: Input/output error
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_trab_asdf.sh__
insmod: read error from '/lib/modules/trab.ko': Input/output error
insmod: can't insert '/lib/modules/trab.ko': Input/output error
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_usb_drv.sh__
NOTICE: Not full features configuration - kbdmouse not operational
insmod: read error from '/lib/modules/g_r8a66597_udc.ko': Input/output error
insmod: can't insert '/lib/modules/g_r8a66597_udc.ko': Input/output error
failed load of g_r8a66597_udc
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_video_drv.sh__
insmod: read error from '/lib/modules/aess_video.ko': Input/output error
insmod: can't insert '/lib/modules/aess_video.ko': Input/output error
waitfor: pid 409, wpid 409

Please press Enter to activate this console. 
starting pid 551, tty '': '-/bin/sh'
[SH7757 ~]$ 14.59 0.01

[SH7757 ~]$ help
-/bin/sh: help: not found
[SH7757 ~]$ ?
-/bin/sh: ?: not found
[SH7757 ~]$ printenv
USER=root
HOME=/
PS1=[SH7757 \w]$ 
SFCC_CLIENT=SfcbLocal
TERM=vt102
mode=normal
PATH=/usr/sbin:/sbin:/bin:/usr/bin
RUNLEVEL=<NULL>
SHELL=/bin/sh
reset_cause=board
mac1=F0:1F:AF:D2:24:4C
mac2=F0:1F:AF:D2:24:4D
PWD=/
[SH7757 ~]$