Created
May 7, 2020 08:00
-
-
Save lpsantil/fc555d3db621c09c63e352d8314d127d to your computer and use it in GitHub Desktop.
idrac7 errors
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
U-Boot 2009.08-00088-g121cddc (Nov 17 2014 - 05:50:46) Avocent (0.0.3) EVB, Build: jenkins-idrac-yocto-release-505 | |
CPU: SH-4A | |
BOARD: R0P7757LC00xxRL (C0 step) board | |
BOOT: Secure, HRK not generated | |
DRAM: 240MB | |
(240MB of 256MB total DRAM is available on U-Boot) | |
ENV: Using primary env area. | |
In: serial | |
Out: serial | |
Err: serial | |
PCIe: Bridge loaded with 0x18000 bytes | |
WDT2: Booted Lower Vector, 'uboot1' | |
sh_mmcif: 0, sh-sdhi: 1 | |
Net: sh_eth.0, sh_g_eth.0 | |
INFO: 00:002 Start-up -to- util_idrac_main() | |
INFO: 00:004 U-Boot 2009.08-00088-g121cddc (Nov 17 2014 - 05:50:46) Avocent (0.0.3) EVB | |
INFO: 00:009 U-Boot checkin date(05-10-2013) Version(1.0.183) | |
INFO: 00:006 iDRAC PPID <NULL> | |
INFO: 00:002 SPI NOR init 4096 KiB N25Q032 bus=0 cs=0, speed=1000000, mode=3 | |
INFO: 00:007 SH-4A Product: Major Ver=0x31 Minor Ver=0x14 C4 Little endian | |
Family=0x10 Major Ver=0x30 Minor Ver=0x0b | |
PASS: 00:016 Dedicated monolithic mgmt NIC disabled | |
INFO: 00:129 BCM54610 OUI=0x3fffff Model=0x3f Revision=0x0f PhyAddr=1 | |
INFO: 00:006 SD CARD: is not found | |
INFO: 00:042 EMMC: Device: sh_mmcif Manufacturer ID: 90 OEM: 14a | |
Name: HYNIX Tran Speed: 25000000 Rd Block Len: 512 | |
MMC version 4.0 High Capacity: Yes Capacity: 0 | |
INFO: 00:019 CPLD: Major Ver=0x1 Minor Ver=0x0 Maint Ver=0x3 | |
Planar: Type=0x02 Rev=0x8 Rework=0x0 Scratch/PathRetry=0x00 | |
PASS: 00:013 Coin cell detected good, AD=0x3a7 low water=0x2c1 | |
PASS: 00:008 PCIe C0 Ver=0.15 MCTP en, CRC=0x8e9b6875 @0x8efbf954 cnt=0x18000 | |
INFO: 00:007 Init PCIe mailbox(PCIe 0xFFEE0150=0x40010000) | |
INFO: 00:006 mode=normal | |
INFO: 00:002 reset_cause=BIOS | |
PASS: 00:005 Booted Lower Vector, 'uboot1' wdt2cnt=0 | |
INFO: 00:005 wdt0cnt=0 | |
PASS: 00:002 SMR0 no sermux env, default 0xd4 | |
INFO: 00:005 GRACR=0x3c HISEL=0x00 SIRQCR5_D=0x03 SIRQCR6_D=0x01 LADMSK0=0xff2 | |
MRSTCR0=0xfedffe7f MRSTCR1=0xfff3ff0f MRSTCR2=0x7f80feff | |
BARMAP=0x1 BCR=0x85000000 NCER=0x01fc NCMCR=0x0006 NCCSR=0x0303 | |
PASS: 00:021 etherc0=F0:1F:AF:D2:24:4C | |
getherc0=F0:1F:AF:D2:24:4D | |
INFO: 00:007 Fan logic is not modified on Non-AC power up | |
INFO: 00:053 Env and backup CRC'ed ok | |
*** no text signature found *** | |
INFO: 00:647 Sync eMMC/SPI NOR/Alternate u-boot images | |
PASS: 00:074 Current u-boot1 1.0.183 verified with 'ubootN' | |
Trailer Struct - Missing start token, exp=0xc0de1111 rec=0x0 | |
PASS: 03:984 Verify OS Images N: CRC32 OK: Kernel=0x8c86b2b Rootfs=0xb0e73b0 | |
PASS: 00:008 Boot device=emmc Boot partition1/N | |
Boot Path Retry:P1/N=0 P5/N-1=0 | |
INFO: 00:000 05:097 | |
WDT2: Disabled | |
Initialization complete, proceed with boot | |
OS_WDT0_EN:180 seconds, Re-load ILRAM: | |
Boot Path Retry:P1/N=0 P5/N-1=0 | |
Copying kernel image ... OK | |
## Booting kernel from Legacy Image at 88000000 ... | |
Image Name: sh-linux | |
Image Type: SuperH Linux Kernel Image (gzip compressed) | |
Data Size: 2545045 Bytes = 2.4 MB | |
Load Address: 80001000 | |
Entry Point: 80002000 | |
Verifying Checksum ... OK | |
Uncompressing Kernel Image ... OK | |
WDT2: Disable in do_bootm_linux() | |
sh_eth_init | |
Monolithic/DRB | |
init started: BusyBox v1.18.4 (2014-11-17 05:25:30 CST) | |
starting pid 409, tty '': '/etc/init.d/rcS' | |
waitfor: pid 409 ... | |
setting net.ipv6.conf.default.accept_dad based on kernel bootup option | |
enable normal accept DAD for ipv6 | |
Sat Jan 1 00:00:01 UTC 2000 To execute command __source /etc/sysapps_script/I_1000_mountfs.sh__ | |
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1001_trigwdt.sh__ | |
<========= Start H/W watchdog first... =========> | |
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1100_nfs.sh__ | |
Sat Jan 1 00:00:02 UTC 2000 To execute command __source /etc/sysapps_script/I_1105_ps.sh__ | |
XXXXXX /dev/mmcblk0p11 | |
/dev/mmcblk0p11: recovering journal | |
fsck.ext3: Attempt to read block from filesystem resulted in short read while trying to re-open /dev/mmcblk0p11 | |
e2fsck: io manager magic bad! | |
e2fsck 1.41.14 (22-Dec-2010) | |
fsck.ext3: Attempt to read block from filesystem resulted in short read while trying to open /dev/mmcblk0p11 | |
Could this be a zero-length partition? | |
mount: mounting /dev/mmcblk0p11 on /flash/data0 failed: Invalid argument | |
mounting private storage fail, formatting partition | |
/etc/init.d/rcS: /etc/sysapps_script/I_1105_ps.sh: line 29: mkfs.ext3: Input/output error | |
tune2fs 1.41.14 (22-Dec-2010) | |
tune2fs: Attempt to read block from filesystem resulted in short read while trying to open /dev/mmcblk0p11 | |
Couldn't find valid filesystem superblock. | |
mount: mounting /dev/mmcblk0p11 on /flash/data0 failed: Invalid argument | |
Sat Jan 1 00:00:03 UTC 2000 To execute command __source /etc/sysapps_script/I_1106_clear_ps.sh__ | |
mkdir: can't create directory '/flash/data0/oem_ps': Read-only file system | |
Sat Jan 1 00:00:03 UTC 2000 To execute command __source /etc/sysapps_script/I_1150_SYS_Drv.sh__ | |
insmod: read error from '/lib/modules/aess_eventhandlerdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_eventhandlerdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_kcsdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_kcsdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_biospostdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_biospostdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_gpiodrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_gpiodrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_sgpiodrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_sgpiodrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_dynairqdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_dynairqdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_i2c_hwctrldrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_i2c_hwctrldrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_i2cdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_i2cdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_pecisensordrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_pecisensordrv.ko': Input/output error | |
insmod: read error from '/lib/modules/cryptodev.ko': Input/output error | |
insmod: can't insert '/lib/modules/cryptodev.ko': Input/output error | |
insmod: read error from '/lib/modules/sh_tsip.ko': Input/output error | |
insmod: can't insert '/lib/modules/sh_tsip.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_fansensordrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_fansensordrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_pwmdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_pwmdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_timerdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_timerdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_adcsensordrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_adcsensordrv.ko': Input/output error | |
insmod: read error from '/lib/modules/VKCSDriver.ko': Input/output error | |
insmod: can't insert '/lib/modules/VKCSDriver.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_memdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_memdrv.ko': Input/output error | |
Sat Jan 1 00:00:05 UTC 2000 To execute command __source /etc/sysapps_script/I_1151_SYS_Drv.sh__ | |
insmod: read error from '/lib/modules/aess_spi1drv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_spi1drv.ko': Input/output error | |
insmod: read error from '/lib/modules/dell_cplddrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/dell_cplddrv.ko': Input/output error | |
insmod: read error from '/lib/modules/aess_rspidrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_rspidrv.ko': Input/output error | |
insmod: read error from '/lib/modules/dell_fpdrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/dell_fpdrv.ko': Input/output error | |
insmod: read error from '/lib/modules/dell_eerspidrv.ko': Input/output error | |
insmod: can't insert '/lib/modules/dell_eerspidrv.ko': Input/output error | |
insmod: read error from '/lib/modules/sh_pbi.ko': Input/output error | |
insmod: can't insert '/lib/modules/sh_pbi.ko': Input/output error | |
Sat Jan 1 00:00:05 UTC 2000 To execute command __source /etc/sysapps_script/I_1170_mknode.sh__ | |
Sat Jan 1 00:00:06 UTC 2000 To execute command __/etc/sysapps_script/config_lib_init.sh__ | |
mounting Platform Data 1 partition | |
mount: mounting /dev/mmcblk0p9 on /tmp/pd0/ failed: Input/output error | |
/etc/sysapps_script/config_lib_init.sh: line 28: /etc/default/ipmi/getsysid: not found | |
/etc/sysapps_script/config_lib_init.sh: line 36: shmwrite: Input/output error | |
mkdir: can't create directory '/flash/data0/config/': Read-only file system | |
/etc/sysapps_script/config_lib_init.sh: cd: line 46: can't cd to /flash/data0/config/ | |
ln: ./lmcfg.txt: Read-only file system | |
ln: ./platcfggrp.txt: Read-only file system | |
ln: ./platcfgfld.txt: Read-only file system | |
ln: ./cfgfld.txt: Read-only file system | |
ln: ./cfggrp.txt: Read-only file system | |
ln: ./gencfggrp.txt: Read-only file system | |
ln: ./gencfgfld.txt: Read-only file system | |
ln: ./nonpmaltdefaults.txt: Read-only file system | |
ln: ./altdefaults.txt: Read-only file system | |
/etc/sysapps_script/network_defaults_init.sh: line 29: /etc/default/ipmi/getsysid: not found | |
MemAccess: error while loading shared libraries: libmemaccess.so.1: cannot open shared object file: Input/output error | |
cp: can't stat '/tmp/pd0/network_config/Orca/iDRACnet.default': No such file or directory | |
cp: can't stat '/tmp/pd0/network_config/Orca/NICSelection.sh': No such file or directory | |
Sat Jan 1 00:00:06 UTC 2000 To execute command __source /etc/sysapps_script/I_1160_OSINET.sh__ | |
MemAccess: error while loading shared libraries: libmemaccess.so.1: cannot open shared object file: Input/output error | |
/etc/sysapps_script/eth1_init.sh: line 33: /tmp/pd0/ipmi/getsysid: not found | |
6.99 0.04 | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_1200_etc_defaults.sh__ | |
cp: can't create '/flash/data0/etc/hosts': Read-only file system | |
mkdir: can't create directory '/flash/data0/sysconfig': Read-only file system | |
mkdir: can't create directory '/flash/data0/ipsec': Read-only file system | |
cp: can't create '/flash/data0/etc/hosts': Read-only file system | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_1210_sysklog_syslogd.sh__ | |
/etc/init.d/rcS: /etc/sysapps_script/I_1210_sysklog_syslogd.sh: line 16: /etc/sysapps_script/syslog.sh: Input/output error | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_trab_asdf.sh__ | |
insmod: read error from '/lib/modules/trab.ko': Input/output error | |
insmod: can't insert '/lib/modules/trab.ko': Input/output error | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_usb_drv.sh__ | |
NOTICE: Not full features configuration - kbdmouse not operational | |
insmod: read error from '/lib/modules/g_r8a66597_udc.ko': Input/output error | |
insmod: can't insert '/lib/modules/g_r8a66597_udc.ko': Input/output error | |
failed load of g_r8a66597_udc | |
Sat Jan 1 00:00:07 UTC 2000 To execute command __source /etc/sysapps_script/I_video_drv.sh__ | |
insmod: read error from '/lib/modules/aess_video.ko': Input/output error | |
insmod: can't insert '/lib/modules/aess_video.ko': Input/output error | |
waitfor: pid 409, wpid 409 | |
Please press Enter to activate this console. 14.63 0.04 | |
starting pid 551, tty '': '-/bin/sh' | |
[SH7757 ~]$ racadm | |
-/bin/sh: racadm: Input/output error | |
[SH7757 ~]$ racadm -h | |
-/bin/sh: racadm: Input/output error | |
[SH7757 ~]$ racadm racreset | |
-/bin/sh: racadm: Input/output error | |
[SH7757 ~]$ ls -lah | |
drwxr-xr-x 19 900 900 377 Nov 17 2014 . | |
drwxr-xr-x 19 900 900 377 Nov 17 2014 .. | |
lrwxrwxrwx 1 900 900 17 Nov 17 2014 .ash_history -> /tmp/.ash_history | |
drwxr-xr-x 5 900 900 54 Nov 17 2014 avct | |
drwxr-xr-x 3 900 900 5.3K Nov 17 2014 bin | |
drwxr-xr-x 4 900 900 3.1K Jan 1 00:00 dev | |
drwxrwxr-x 27 900 900 1.4K Nov 17 2014 etc | |
drwxr-xr-x 5 900 900 54 Nov 17 2014 flash | |
drwxrwxr-x 7 900 900 3.5K Nov 17 2014 lib | |
lrwxrwxrwx 1 900 900 11 Nov 17 2014 libexec -> usr/libexec | |
lrwxrwxrwx 1 900 900 11 Nov 17 2014 linuxrc -> bin/busybox | |
drwxrwxr-x 2 900 900 224 Nov 17 2014 maser-zip | |
lrwxrwxrwx 1 900 900 12 Nov 17 2014 messages -> tmp/messages | |
drwxrwxr-x 2 900 900 3 Nov 17 2014 mmc1 | |
drwxrwxr-x 2 900 900 3 Nov 17 2014 mmc2 | |
drwxr-xr-x 8 900 900 99 Nov 17 2014 mnt | |
dr-xr-xr-x 39 root root 0 Jan 1 00:00 proc | |
drwxr-xr-x 3 900 900 1.9K Nov 17 2014 sbin | |
lrwxrwxrwx 1 900 900 10 Nov 17 2014 share -> usr/share/ | |
-rw-r--r-- 1 900 900 0 Nov 17 2014 singletask.lock | |
drwxr-xr-x 2 900 900 34 Nov 17 2014 ssl | |
drwxr-xr-x 11 root root 0 Jan 1 00:00 sys | |
drwxrwxrwt 8 root root 220 Jan 1 00:05 tmp | |
drwxr-xr-x 11 900 900 163 Nov 17 2014 usr | |
drwxr-xr-x 6 900 900 200 Nov 17 2014 var | |
[SH7757 ~]$ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment