Skip to content

Instantly share code, notes, and snippets.

@lucmann
Last active March 17, 2026 23:01
Show Gist options
  • Select an option

  • Save lucmann/75740f2220b2eaad54d05cc4a2fc7d16 to your computer and use it in GitHub Desktop.

Select an option

Save lucmann/75740f2220b2eaad54d05cc4a2fc7d16 to your computer and use it in GitHub Desktop.
hikey970-6.19.0-rc6-g837cd6cd6753-dirty
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.19.0-rc6-g837cd6cd6753-dirty (luc@vostro) (aarch64-linux-gnu-gcc (GCC) 15.1.0, GNU ld (GNU Binutils) 2.44) #62 SMP PREEMPT Wed Mar 18 06:55:07 CST 2026
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: HiKey970
[ 0.000000] earlycon: pl11 at MMIO 0x00000000fff32000 (options '115200')
[ 0.000000] printk: legacy bootconsole [pl11] enabled
[ 0.000000] efi: EFI v2.6 by EDK II
[ 0.000000] efi: MEMATTR=0xbe637018 MEMRESERVE=0xba404c18
[ 0.000000] Reserved memory: created CMA memory pool at 0x0000000032200000, size 128 MiB
[ 0.000000] OF: reserved mem: initialized node drm_dma_mem_region, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x0000000032200000..0x000000003a1fffff (131072 KiB) map reusable drm_dma_mem_region
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x00000000167fffff]
[ 0.000000] node 0: [mem 0x0000000016988000-0x00000000209fffff]
[ 0.000000] node 0: [mem 0x0000000020b00000-0x00000000320fffff]
[ 0.000000] node 0: [mem 0x0000000032101000-0x000000008e0fffff]
[ 0.000000] node 0: [mem 0x000000008e240000-0x00000000ba3effff]
[ 0.000000] node 0: [mem 0x00000000ba3f0000-0x00000000ba3fffff]
[ 0.000000] node 0: [mem 0x00000000ba400000-0x00000000ba438fff]
[ 0.000000] node 0: [mem 0x00000000ba439000-0x00000000ba43cfff]
[ 0.000000] node 0: [mem 0x00000000ba43d000-0x00000000ba44ffff]
[ 0.000000] node 0: [mem 0x00000000ba450000-0x00000000ba68ffff]
[ 0.000000] node 0: [mem 0x00000000ba690000-0x00000000bf65ffff]
[ 0.000000] node 0: [mem 0x00000000bf660000-0x00000000bf69ffff]
[ 0.000000] node 0: [mem 0x00000000bf6a0000-0x00000000bf6affff]
[ 0.000000] node 0: [mem 0x00000000bf6b0000-0x00000000bf6fffff]
[ 0.000000] node 0: [mem 0x00000000bf700000-0x00000000bfffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bfffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001bfffffff]
[ 0.000000] On node 0, zone DMA: 392 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 256 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.000000] On node 0, zone DMA: 320 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 23 pages/cpu s56088 r8192 d29928 u94208
[ 0.000000] pcpu-alloc: s56088 r8192 d29928 u94208 alloc=23*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: BOOT_IMAGE=/Image-hikey970-v6.19.0-rc2.gz drm.debug=0x3f earlycon=pl011,0xfff32000,115200 clk_ignore_unused=true console=tty0 console=ttyAMA6,115200n8 root=/dev/mmcblk0p2 rootwait rw debug loglevel=8 efi=noruntime dw_mmc.debug=1
[ 0.000000] printk: log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] printk: log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] printk: log_buf_len min size: 16384 bytes
[ 0.000000] printk: log buffer data + meta data: 65536 + 229376 = 294912 bytes
[ 0.000000] printk: early log buf free: 12888(78%)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] software IO TLB: area num 8.
[ 0.000000] software IO TLB: mapped [mem 0x00000000b0200000-0x00000000b4200000] (64MB)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1571895
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer running at 1.92MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1c570327e, max_idle_ns: 1763180809505 ns
[ 0.000001] sched_clock: 56 bits at 1920kHz, resolution 520ns, wraps every 4398046510977ns
[ 0.008983] Calibrating delay loop (skipped), value calculated using timer frequency.. 3.84 BogoMIPS (lpj=7680)
[ 0.019189] pid_max: default: 32768 minimum: 301
[ 0.023976] SELinux: Initializing.
[ 0.027863] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.035529] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.044560] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 0.051392] rcu: Hierarchical SRCU implementation.
[ 0.056233] rcu: Max phase no-delay instances is 1000.
[ 0.061660] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.070584] EFI runtime services will be disabled.
[ 0.075670] smp: Bringing up secondary CPUs ...
[ 0.080756] Detected VIPT I-cache on CPU1
[ 0.080821] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.081373] Detected VIPT I-cache on CPU2
[ 0.081408] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.081900] Detected VIPT I-cache on CPU3
[ 0.081931] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.082927] CPU features: detected: Spectre-v2
[ 0.082934] CPU features: detected: Spectre-v4
[ 0.082937] CPU features: detected: Spectre-BHB
[ 0.082940] CPU features: detected: ARM erratum 858921
[ 0.082945] Detected VIPT I-cache on CPU4
[ 0.082975] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.082985] arch_timer: CPU4: Trapping CNTVCT access
[ 0.082991] CPU4: Booted secondary processor 0x0000000100 [0x410fd092]
[ 0.083490] Detected VIPT I-cache on CPU5
[ 0.083508] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.083513] arch_timer: CPU5: Trapping CNTVCT access
[ 0.083517] CPU5: Booted secondary processor 0x0000000101 [0x410fd092]
[ 0.083995] Detected VIPT I-cache on CPU6
[ 0.084015] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084019] arch_timer: CPU6: Trapping CNTVCT access
[ 0.084024] CPU6: Booted secondary processor 0x0000000102 [0x410fd092]
[ 0.084538] Detected VIPT I-cache on CPU7
[ 0.084558] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.084563] arch_timer: CPU7: Trapping CNTVCT access
[ 0.084567] CPU7: Booted secondary processor 0x0000000103 [0x410fd092]
[ 0.084617] smp: Brought up 1 node, 8 CPUs
[ 0.229059] SMP: Total of 8 processors activated.
[ 0.233817] CPU: All CPU(s) started at EL2
[ 0.237988] CPU features: detected: 32-bit EL0 Support
[ 0.243180] CPU features: detected: 32-bit EL1 Support
[ 0.248381] CPU features: detected: CRC32 instructions
[ 0.253579] CPU features: detected: PMUv3
[ 0.257669] alternatives: applying system-wide alternatives
[ 0.264518] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[ 0.273258] Memory: 5926572K/6287580K available (17088K kernel code, 2190K rwdata, 9432K rodata, 3072K init, 361K bss, 225888K reserved, 131072K cma-reserved)
[ 0.289934] devtmpfs: initialized
[ 0.297948] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.307832] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.315420] futex hash table entries: 2048 (131072 bytes on 1 NUMA nodes, total 128 KiB, linear).
[ 0.326153] 24672 pages in range for non-PLT usage
[ 0.326165] 516192 pages in range for PLT usage
[ 0.331874] regulator-dummy: 2147483647 mW budge, enabled
[ 0.342122] DMI not present or invalid.
[ 0.347758] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.354627] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.362023] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.369963] audit: initializing netlink subsys (disabled)
[ 0.375581] audit: type=2000 audit(0.248:1): state=initialized audit_enabled=0 res=1
[ 0.376819] thermal_sys: Registered thermal governor 'fair_share'
[ 0.383444] cpuidle: using governor ladder
[ 0.393753] cpuidle: using governor menu
[ 0.397871] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.404840] ASID allocator initialised with 65536 entries
[ 0.410922] Serial: AMBA PL011 UART driver
[ 0.428252] /dpe@e8600000: Fixed dependency cycle(s) with /dsi@e8601000
[ 0.434993] /soc/i2c@fdf0d000/adv7533@39: Fixed dependency cycle(s) with /dsi@e8601000
[ 0.443050] /dsi@e8601000: Fixed dependency cycle(s) with /soc/i2c@fdf0d000/adv7533@39
[ 0.451063] /dsi@e8601000: Fixed dependency cycle(s) with /dpe@e8600000
[ 0.459091] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.465960] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.472300] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.479160] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.485494] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.492352] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.498686] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.505546] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.512919] ACPI: Interpreter disabled.
[ 0.517282] iommu: Default domain type: Translated
[ 0.517499] fixed-3.3V: 3300 mV 2147483647 mW budge, enabled
[ 0.522129] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.527995] reg-fixed-voltage regulator-3v3: fixed-3.3V supplying 3300000uV
[ 0.541517] SCSI subsystem initialized
[ 0.545407] libata version 3.00 loaded.
[ 0.549521] usbcore: registered new interface driver usbfs
[ 0.555091] usbcore: registered new interface driver hub
[ 0.560482] usbcore: registered new device driver usb
[ 0.565734] mc: Linux media interface: v0.10
[ 0.570079] videodev: Linux video capture interface: v2.00
[ 0.575673] pps_core: LinuxPPS API ver. 1 registered
[ 0.580690] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 0.589931] PTP clock support registered
[ 0.594366] Advanced Linux Sound Architecture Driver Initialized.
[ 0.601185] Bluetooth: Core ver 2.22
[ 0.604818] NET: Registered PF_BLUETOOTH protocol family
[ 0.610186] Bluetooth: HCI device and connection manager initialized
[ 0.616616] Bluetooth: HCI socket layer initialized
[ 0.621551] Bluetooth: L2CAP socket layer initialized
[ 0.626679] Bluetooth: SCO socket layer initialized
[ 0.631900] vgaarb: loaded
[ 0.634933] clocksource: Switched to clocksource arch_sys_counter
[ 0.641302] VFS: Disk quotas dquot_6.6.0
[ 0.645282] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.652524] pnp: PnP ACPI: disabled
[ 0.656721] NET: Registered PF_INET protocol family
[ 0.661873] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.673406] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.682108] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.689953] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.698255] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[ 0.707150] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.713891] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.720935] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 0.728589] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.735287] PCI: CLS 0 bytes, default 64
[ 0.743183] kvm [1]: nv: 568 coarse grained trap handlers
[ 0.749085] kvm [1]: IPA Size Limit: 40 bits
[ 0.755088] kvm [1]: vgic interrupt IRQ9
[ 0.759083] kvm [1]: Hyp nVHE mode initialized successfully
[ 0.766079] Initialise system trusted keyrings
[ 0.770709] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[ 0.777463] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.783375] fuse: init (API version 7.45)
[ 0.787534] 9p: Installing v9fs 9p2000 file system support
[ 0.793636] cryptd: max_cpu_qlen set to 1000
[ 0.838351] Key type asymmetric registered
[ 0.842492] Asymmetric key parser 'x509' registered
[ 0.847469] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.854947] io scheduler mq-deadline registered
[ 0.859525] io scheduler kyber registered
[ 0.863608] io scheduler bfq registered
[ 0.870086] pinctrl-single e896c000.pinmux: 459 pins, size 1836
[ 0.876874] pinctrl-single fff11000.pinmux: 463 pins, size 1852
[ 0.883437] pinctrl-single e896c800.pinmux: 459 pins, size 1836
[ 0.889739] pinctrl-single fc182000.pinmux: 10 pins, size 40
[ 0.895605] pinctrl-single fc182800.pinmux: 10 pins, size 40
[ 0.901481] pinctrl-single ff37e000.pinmux: 12 pins, size 48
[ 0.907355] pinctrl-single ff37e800.pinmux: 12 pins, size 48
[ 0.913674] pinctrl-single fff11800.pinmux: 463 pins, size 1852
[ 0.922031] pl061_gpio e8a0b000.gpio: PL061 GPIO chip registered
[ 0.928419] pl061_gpio e8a0c000.gpio: PL061 GPIO chip registered
[ 0.934793] pl061_gpio e8a0d000.gpio: PL061 GPIO chip registered
[ 0.941161] pl061_gpio e8a0e000.gpio: PL061 GPIO chip registered
[ 0.947521] pl061_gpio e8a0f000.gpio: PL061 GPIO chip registered
[ 0.953894] pl061_gpio e8a10000.gpio: PL061 GPIO chip registered
[ 0.960370] pl061_gpio e8a11000.gpio: PL061 GPIO chip registered
[ 0.966737] pl061_gpio e8a12000.gpio: PL061 GPIO chip registered
[ 0.973108] pl061_gpio e8a13000.gpio: PL061 GPIO chip registered
[ 0.979488] pl061_gpio e8a14000.gpio: PL061 GPIO chip registered
[ 0.985876] pl061_gpio e8a15000.gpio: PL061 GPIO chip registered
[ 0.992243] pl061_gpio e8a16000.gpio: PL061 GPIO chip registered
[ 0.998609] pl061_gpio e8a17000.gpio: PL061 GPIO chip registered
[ 1.004978] pl061_gpio e8a18000.gpio: PL061 GPIO chip registered
[ 1.011338] pl061_gpio e8a19000.gpio: PL061 GPIO chip registered
[ 1.017710] pl061_gpio e8a1a000.gpio: PL061 GPIO chip registered
[ 1.024080] pl061_gpio e8a1b000.gpio: PL061 GPIO chip registered
[ 1.030445] pl061_gpio e8a1c000.gpio: PL061 GPIO chip registered
[ 1.036837] pl061_gpio fff28000.gpio: PL061 GPIO chip registered
[ 1.043279] pl061_gpio fff29000.gpio: PL061 GPIO chip registered
[ 1.049653] pl061_gpio e8a1f000.gpio: PL061 GPIO chip registered
[ 1.056035] pl061_gpio e8a20000.gpio: PL061 GPIO chip registered
[ 1.062436] pl061_gpio fff0b000.gpio: PL061 GPIO chip registered
[ 1.068818] pl061_gpio fff0c000.gpio: PL061 GPIO chip registered
[ 1.075211] pl061_gpio fff0d000.gpio: PL061 GPIO chip registered
[ 1.081700] pl061_gpio fff0e000.gpio: PL061 GPIO chip registered
[ 1.088085] pl061_gpio fff0f000.gpio: PL061 GPIO chip registered
[ 1.094459] pl061_gpio fff10000.gpio: PL061 GPIO chip registered
[ 1.100830] pl061_gpio fff1d000.gpio: PL061 GPIO chip registered
[ 1.108024] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.125503] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.133733] msm_serial: driver initialized
[ 1.137969] SuperH (H)SCI(F) driver initialized
[ 1.143277] [drm:drm_core_init] Initialized
[ 1.154144] brd: module loaded
[ 1.161648] loop: module loaded
[ 1.168126] tun: Universal TUN/TAP device driver, 1.6
[ 1.173412] CAN device driver interface
[ 1.177755] e1000e: Intel(R) PRO/1000 Network Driver
[ 1.182772] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.186544] ldo3: 1500 <--> 2000 mV at 1800 mV 2147483647 mW budge, enabled
[ 1.188796] igb: Intel(R) Gigabit Ethernet Network Driver
[ 1.201249] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.206914] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.213248] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.216144] ldo4: 1725 <--> 1900 mV at 1800 mV 2147483647 mW budge, enabled
[ 1.219265] sky2: driver version 1.30
[ 1.230164] PPP generic driver version 2.4.2
[ 1.234595] PPP BSD Compression module registered
[ 1.239355] PPP Deflate Compression module registered
[ 1.244459] PPP MPPE Compression module registered
[ 1.246850] ldo9: 1750 <--> 3300 mV at 2950 mV 2147483647 mW budge, enabled
[ 1.249404] usbcore: registered new interface driver asix
[ 1.261826] usbcore: registered new interface driver ax88179_178a
[ 1.268019] usbcore: registered new interface driver cdc_ether
[ 1.273948] usbcore: registered new interface driver net1080
[ 1.276927] ldo15: 1800 <--> 3000 mV at 2950 mV 2147483647 mW budge, enabled
[ 1.279704] usbcore: registered new interface driver cdc_subset
[ 1.292800] usbcore: registered new interface driver zaurus
[ 1.298465] usbcore: registered new interface driver cdc_ncm
[ 1.304407] VFIO - User Level meta-driver version: 0.3
[ 1.307376] ldo16: 1800 <--> 3000 mV at 2950 mV 2147483647 mW budge, enabled
[ 1.311192] usbcore: registered new interface driver usb-storage
[ 1.316790] ldo17: 2500 <--> 3300 mV at 2500 mV 2147483647 mW budge, disabled
[ 1.323571] mousedev: PS/2 mouse device common for all mice
[ 1.330059] ldo33: 2500 <--> 3300 mV at 2500 mV 2147483647 mW budge, disabled
[ 1.335720] usbcore: registered new interface driver xpad
[ 1.342902] ldo34: 2600 <--> 3300 mV at 2600 mV 2147483647 mW budge, disabled
[ 1.348313] usbcore: registered new interface driver usb_acecad
[ 1.361497] usbcore: registered new interface driver aiptek
[ 1.367163] usbcore: registered new interface driver hanwang
[ 1.372921] usbcore: registered new interface driver kbtab
[ 1.379131] i2c_dev: i2c /dev entries driver
[ 1.384041] usbcore: registered new interface driver uvcvideo
[ 1.390661] device-mapper: uevent: version 1.0.3
[ 1.395452] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: [email protected]
[ 1.404528] Bluetooth: HCI UART driver ver 2.3
[ 1.409027] Bluetooth: HCI UART protocol H4 registered
[ 1.414452] sdhci: Secure Digital Host Controller Interface driver
[ 1.420699] sdhci: Copyright(c) Pierre Ossman
[ 1.425163] Synopsys Designware Multimedia Card Interface Driver
[ 1.431546] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.431693] dwmmc_k3 ff37f000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[ 1.437662] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[ 1.449574] dwmmc_k3 ff37f000.dwmmc1: IDMAC supports 64-bit address mode.
[ 1.458097] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vcc-supply regulator, assuming enabled
[ 1.464959] dwmmc_k3 ff37f000.dwmmc1: Using internal DMA controller.
[ 1.475319] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[ 1.481734] dwmmc_k3 ff37f000.dwmmc1: Version ID is 270a
[ 1.492189] ufshcd-hisi ff3c0000.ufs: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[ 1.497573] dwmmc_k3 ff37f000.dwmmc1: DW MMC controller at irq 43,32 bit host data width,256 deep fifo
[ 1.508110] ufshcd-hisi ff3c0000.ufs: invalid ref_clk setting = 3200000
[ 1.517539] dwmmc_k3 ff37f000.dwmmc1: Looking up vmmc-supply from device node /soc/dwmmc1@ff37f000
[ 1.533286] dwmmc_k3 ff37f000.dwmmc1: Looking up vqmmc-supply from device node /soc/dwmmc1@ff37f000
[ 1.542468] dwmmc_k3 ff37f000.dwmmc1: Looking up vqmmc2-supply from device node /soc/dwmmc1@ff37f000
[ 1.551704] dwmmc_k3 ff37f000.dwmmc1: Looking up vqmmc2-supply property in node /soc/dwmmc1@ff37f000 failed
[ 1.553297] scsi host0: ufshcd
[ 1.561620] dwmmc_k3 ff37f000.dwmmc1: Got CD GPIO
[ 1.584416] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.608586] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.608865] hid: raw HID events driver (C) Jiri Kosina
[ 1.618405] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.624793] usbcore: registered new interface driver usbhid
[ 1.632319] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.636468] usbhid: USB HID core driver
[ 1.636624] [drm] the device node is dpe
[ 1.646353] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.648884] [drm] the device remote node is dsi
[ 1.654134] sd 0:0:0:0: [sda] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.654214] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.655500] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[ 1.655542] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.655557] sd 0:0:0:1: [sdb] Write Protect is off
[ 1.655561] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[ 1.655665] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.655713] sd 0:0:0:1: [sdb] Preferred minimum I/O size 8192 bytes
[ 1.655716] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
[ 1.656822] sd 0:0:0:2: [sdc] 2048 4096-byte logical blocks: (8.39 MB/8.00 MiB)
[ 1.656855] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1ED-B0C1 0300 PQ: 0 ANSI: 6
[ 1.656876] sd 0:0:0:2: [sdc] Write Protect is off
[ 1.656880] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[ 1.656979] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.657022] sd 0:0:0:2: [sdc] Preferred minimum I/O size 8192 bytes
[ 1.657026] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
[ 1.658116] sd 0:0:0:3: [sdd] 15616000 4096-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.658173] sd 0:0:0:3: [sdd] Write Protect is off
[ 1.658179] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[ 1.658280] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.658327] sd 0:0:0:3: [sdd] Preferred minimum I/O size 8192 bytes
[ 1.658333] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
[ 1.661287] [drm] the bridge node is dsi_parse_bridge_endpoint
[ 1.665643] sd 0:0:0:0: [sda] Write Protect is off
[ 1.672979] [drm] wait for external HDMI bridge driver.
[ 1.681145] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[ 1.688538] [drm] since probe order adjusted, defer this to dsi_bind() -> dw_drm_encoder_init()
[ 1.696809] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 1.701542] [drm:dsi_parse_endpoint] *ERROR* at least one bridge or panel node is required
[ 1.703246] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 1.704755] GPT:Primary header thinks Alt. header is not at the end of the disk.
[ 1.704760] GPT:7805956 != 15615999
[ 1.704764] GPT:Alternate GPT header not at the end of the disk.
[ 1.704766] GPT:7805956 != 15615999
[ 1.704769] GPT: Use GNU Parted to correct GPT errors.
[ 1.704800] sdd: sdd1 sdd2 sdd3 sdd4 sdd5 sdd6 sdd7 sdd8 sdd9 sdd10 sdd11 sdd12 sdd13 sdd14 sdd15
[ 1.706295] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 1.706721] sd 0:0:0:0: [sda] Preferred minimum I/O size 8192 bytes
[ 1.715351] [drm:dsi_parse_endpoint] *ERROR* at least one bridge or panel node is required
[ 1.719159] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 1.721609] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
[ 1.727669] [drm] dsi cur_client is 1 <0->hdmi;1->panel>
[ 1.798932] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 200000000Hz, actual 150000000HZ div = 0)
[ 1.800231] [drm:dsi_probe] dss_dphy0_ref_clk:[19200000]->[19200000].
[ 1.950743] [drm:dsi_probe] dss_dphy0_cfg_clk:[19200000]->[19200000].
[ 1.958565] u32 classifier
[ 1.961298] input device check on
[ 1.964993] Actions configured
[ 1.969500] xt_time: kernel timezone is -0000
[ 1.973960] Initializing XFRM netlink socket
[ 1.976522] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.978300] NET: Registered PF_INET6 protocol family
[ 1.988332] Segment Routing with IPv6
[ 1.992048] In-situ OAM (IOAM) with IPv6
[ 1.996042] mip6: Mobile IPv6
[ 1.999059] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.005279] NET: Registered PF_PACKET protocol family
[ 2.010386] PFKEY is deprecated and scheduled to be removed in 2027, please contact the netdev mailing list
[ 2.020233] NET: Registered PF_KEY protocol family
[ 2.025070] can: controller area network core
[ 2.029478] NET: Registered PF_CAN protocol family
[ 2.034315] can: raw protocol
[ 2.037308] can: broadcast manager protocol
[ 2.041532] can: netlink gateway - max_hops=1
[ 2.045985] Bluetooth: RFCOMM TTY layer initialized
[ 2.050916] Bluetooth: RFCOMM socket layer initialized
[ 2.056110] Bluetooth: RFCOMM ver 1.11
[ 2.059894] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.065874] Bluetooth: HIDP socket layer initialized
[ 2.070960] 9pnet: Installing 9P2000 support
[ 2.080996] registered taskstats version 1
[ 2.085157] Loading compiled-in X.509 certificates
[ 2.100688] fdf02000.serial: ttyAMA0 at MMIO 0xfdf02000 (irq = 46, base_baud = 0) is a PL011 rev2
[ 2.109996] fdf03000.serial: ttyAMA2 at MMIO 0xfdf03000 (irq = 47, base_baud = 0) is a PL011 rev2
[ 2.119630] fff32000.serial: ttyAMA6 at MMIO 0xfff32000 (irq = 48, base_baud = 0) is a PL011 rev2
[ 2.128654] printk: console [ttyAMA6] enabled
[ 2.128654] printk: console [ttyAMA6] enabled
[ 2.137423] printk: legacy bootconsole [pl11] disabled
[ 2.137423] printk: legacy bootconsole [pl11] disabled
[ 2.152041] wlan-en-regulator: 1800 mV 2147483647 mW budge, disabled
[ 2.152120] reg-fixed-voltage wlan-en-1-8v: wlan-en-regulator supplying 1800000uV
[ 2.152521] adv7511 0-0039: adv7511_probe enter
[ 2.152526] adv7511 0-0039: adv7511_probe alloc
[ 2.152534] adv7511 0-0039: adv7511_probe find bridge
[ 2.152545] adv7511 0-0039: Looking up avdd-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.152597] adv7511 0-0039: Looking up dvdd-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.152617] adv7511 0-0039: Looking up pvdd-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.152643] adv7511 0-0039: Looking up a2vdd-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.152659] adv7511 0-0039: Looking up v3p3-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.152704] adv7511 0-0039: Looking up v1p2-supply from device node /soc/i2c@fdf0d000/adv7533@39
[ 2.152754] adv7511 0-0039: adv7511_probe init regulator ok
[ 2.158534] adv7511 0-0039: adv7511_probe init i2c ok
[ 2.170475] adv7511 0-0039: Rev. 20
[ 2.248680] [drm] luc Initialized kirin9xx 1.0.0 on minor 0
[ 2.248872] [drm] dss irq = 51.
[ 2.248876] kirin9xx-drm e8600000.dpe: Looking up ldo3-supply from device node /dpe@e8600000
[ 2.248969] [drm] dsi_bind
[ 2.248971] kirin9xx-dw-dsi e8601000.dsi: dw_drm_encoder_init:
[ 2.268620] kirin9xx-drm e8600000.dpe: bound e8601000.dsi (ops dsi_ops)
[ 2.364165] dwmmc_k3 ff37f000.dwmmc1: tuning ok best_clksmpl 11 tuning_sample_flag bff7fff7
[ 2.364180] mmc0: new UHS-I speed SDR104 SDHC card at address aaaa
[ 2.364455] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[ 2.378779] mmcblk0: p1 p2
[ 2.483273] kirin9xx-drm e8600000.dpe: [drm:check_connector_changed] [CONNECTOR:37:HDMI-A-1] status updated from unknown to connected
[ 2.483292] kirin9xx-drm e8600000.dpe: [drm:check_connector_changed] [CONNECTOR:37:HDMI-A-1] Changed epoch counter 0 => 1
[ 2.483300] [drm:drm_mode_object_get] OBJ ID: 37 (2)
[ 2.483308] kirin9xx-drm e8600000.dpe: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:37:HDMI-A-1] generating connector hotplug event
[ 2.483325] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (2)
[ 2.506930] [drm] client change to HDMI
[ 2.506953] [drm:drm_minor_register]
[ 2.507058] [drm:drm_minor_register] new minor registered 128
[ 2.507063] [drm:drm_minor_register]
[ 2.507124] [drm:drm_minor_register] new minor registered 0
[ 2.507128] [drm:drm_minor_register]
[ 2.507146] kirin9xx-drm e8600000.dpe: [drm:drm_sysfs_connector_add] [CONNECTOR:37:HDMI-A-1] adding connector to sysfs
[ 2.507200] kirin9xx-drm e8600000.dpe: [drm:drm_sysfs_connector_hotplug_event] [CONNECTOR:37:HDMI-A-1] generating connector hotplug event
[ 2.511243] [drm] Initialized kirin9xx 1.0.0 for e8600000.dpe on minor 0
[ 2.511270] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe]
[ 2.511277] [drm:drm_mode_object_get] OBJ ID: 37 (3)
[ 2.511283] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1]
[ 2.614057] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] CEA VCDB 0xd5
[ 2.614069] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI: DVI dual 0, max TMDS clock 360000 kHz
[ 2.614076] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI sink does deep color 30.
[ 2.614081] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] Assigning HDMI sink color depth as 10 bpc.
[ 2.614087] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI sink does YCRCB444 in deep color.
[ 2.614092] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI sink should do DC_36, but does not!
[ 2.614100] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] ELD monitor Sculptor
[ 2.614105] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] HDMI: latency present 0 0, video latency 0 0, audio latency 0 0
[ 2.614111] kirin9xx-drm e8600000.dpe: [drm:update_display_info.part.0] [CONNECTOR:37:HDMI-A-1] ELD size 32, SAD count 1
[ 2.614250] [drm] Valid mode: 1920x1080@60, clock 148500 (adjusted to 144000)
[ 2.614270] [drm] Valid mode: 1920x1080@50, clock 117000 (adjusted to 117000)
[ 2.614288] [drm] Valid mode: 1152x864@60, clock 81579 (adjusted to 81579)
[ 2.614291] [drm] Valid mode: 1280x720@60, clock 74250 (adjusted to 72000)
[ 2.614309] [drm] Valid mode: 1280x1024@60, clock 108000 (adjusted to 108000)
[ 2.614327] [drm] Valid mode: 1600x900@60, clock 108000 (adjusted to 108000)
[ 2.614345] [drm] Valid mode: 800x600@60, clock 40000 (adjusted to 40000)
[ 2.614363] [drm] Valid mode: 1024x768@60, clock 65000 (adjusted to 65000)
[ 2.614367] [drm] Valid mode: 1920x1080@60, clock 148500 (adjusted to 144000)
[ 2.614371] [drm] Valid mode: 1280x720@50, clock 74250 (adjusted to 72000)
[ 2.614374] [drm] Valid mode: 1280x720@60, clock 74250 (adjusted to 72000)
[ 2.614379] [drm] Valid mode: 1920x1080@50, clock 148500 (adjusted to 144000)
[ 2.614382] [drm] Valid mode: 1280x720@60, clock 74176 (adjusted to 74176)
[ 2.614385] [drm] Valid mode: 1920x1080@60, clock 148352 (adjusted to 148352)
[ 2.614392] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:37:HDMI-A-1] probed modes:
[ 2.614398] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1082 1087 1125 0x48 0x5
[ 2.614405] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 2.614412] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 60 148352 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5
[ 2.614418] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 148500 1920 2448 2492 2640 1080 1084 1089 1125 0x40 0x5
[ 2.614424] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1920x1080": 50 117000 1920 2008 2052 2080 1080 1084 1089 1125 0x40 0x5
[ 2.614430] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1600x900": 60 108000 1600 1624 1704 1800 900 901 904 1000 0x40 0x5
[ 2.614436] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x1024": 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 2.614442] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1152x864": 60 81579 1152 1216 1336 1520 864 865 868 895 0x0 0x6
[ 2.614448] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 2.614454] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74250 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 2.614460] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 60 74176 1280 1390 1430 1650 720 725 730 750 0x40 0x5
[ 2.614466] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1280x720": 50 74250 1280 1720 1760 1980 720 725 730 750 0x40 0x5
[ 2.614472] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "1024x768": 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 2.614478] kirin9xx-drm e8600000.dpe: [drm:drm_helper_probe_single_connector_modes] Probed mode: "800x600": 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 2.614484] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] [CONNECTOR:37:HDMI-A-1] enabled? yes
[ 2.614494] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] Not using firmware configuration
[ 2.614502] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] [CONNECTOR:37:HDMI-A-1] found preferred mode: 1920x1080
[ 2.614508] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] picking CRTCs for 2048x2048 config
[ 2.614515] kirin9xx-drm e8600000.dpe: [drm:drm_client_modeset_probe] [CRTC:35:crtc-0] desired mode 1920x1080 set (0,0)
[ 2.614520] [drm:drm_mode_object_get] OBJ ID: 37 (3)
[ 2.614525] [drm:drm_mode_object_put.part.0] OBJ ID: 37 (4)
[ 2.614532] kirin9xx-drm e8600000.dpe: [drm:__drm_fb_helper_initial_config_and_unlock] test CRTC 0 primary plane
[ 2.614541] kirin9xx-drm e8600000.dpe: [drm:drm_fbdev_dma_driver_fbdev_probe] surface width(1920), height(1080) and bpp(32)
[ 2.625011] kirin9xx-drm e8600000.dpe: [drm:drm_mode_addfb2] [FB:40]
[ 2.625018] [drm:drm_mode_object_put.part.0] OBJ ID: 40 (2)
[ 2.625098] kirin9xx-drm e8600000.dpe: [drm] fb0: kirin9xxdrmfb frame buffer device
[ 2.625103] [drm] Initialized kirin9xx 1.0.0 on minor 0
[ 2.625107] [drm] host attach, client name=[adv7533], id=0
[ 2.625113] adv7511 0-0039: adv7511_probe attach dsi ok
[ 2.625115] adv7511 0-0039: adv7511_probe ok
[ 2.626310] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 2.626681] dwmmc_k3 fc183000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[ 2.626979] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.627349] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 2.627391] faux_driver regulatory: Direct firmware load for regulatory.db failed with error -2
[ 2.627396] cfg80211: failed to load regulatory.db
[ 2.627483] clk: Not disabling unused clocks
[ 2.627485] PM: genpd: Disabling unused power domains
[ 2.627490] ALSA device list:
[ 2.627492] No soundcards found.
[ 2.628818] dwmmc_k3 fc183000.dwmmc2: IDMAC supports 64-bit address mode.
[ 2.628833] dwmmc_k3 fc183000.dwmmc2: Using internal DMA controller.
[ 2.628838] dwmmc_k3 fc183000.dwmmc2: Version ID is 270a
[ 2.628862] dwmmc_k3 fc183000.dwmmc2: DW MMC controller at irq 52,32 bit host data width,256 deep fifo
[ 2.628910] dwmmc_k3 fc183000.dwmmc2: Looking up vmmc-supply from device node /soc/dwmmc2@fc183000
[ 2.628980] dwmmc_k3 fc183000.dwmmc2: Looking up vqmmc-supply from device node /soc/dwmmc2@fc183000
[ 2.628986] dwmmc_k3 fc183000.dwmmc2: Looking up vqmmc-supply property in node /soc/dwmmc2@fc183000 failed
[ 2.628996] dwmmc_k3 fc183000.dwmmc2: Looking up vqmmc2-supply from device node /soc/dwmmc2@fc183000
[ 2.629001] dwmmc_k3 fc183000.dwmmc2: Looking up vqmmc2-supply property in node /soc/dwmmc2@fc183000 failed
[ 2.629031] mmc_host mmc1: card is non-removable.
[ 2.636565] check access for rdinit=/init failed: -2, ignoring
[ 2.720960] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.762620] dwmmc_k3 fc183000.dwmmc2: card claims to support voltages below defined range
[ 3.094846] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 3.333160] mmc1: new SDIO card at address 0001
[ 3.338333] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl1271-nvs.bin failed with error -2
[ 3.338355] wl18xx_driver wl18xx.1.auto: Direct firmware load for ti-connectivity/wl18xx-conf.bin failed with error -2
[ 3.338358] wlcore: ERROR could not get configuration binary ti-connectivity/wl18xx-conf.bin: -2
[ 3.338360] wlcore: WARNING falling back to default config
[ 3.453494] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.484313] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 3.585485] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.616300] mmc_host mmc1: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0)
[ 3.827405] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[ 3.835032] wlcore: loaded
[ 3.988325] EXT4-fs (mmcblk0p2): recovery complete
[ 3.993462] EXT4-fs (mmcblk0p2): mounted filesystem 569fe59e-63c3-4eaf-914a-ebf82f1afe59 r/w with ordered data mode. Quota mode: none.
[ 3.993528] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 4.011681] devtmpfs: mounted
[ 4.012277] Freeing unused kernel memory: 3072K
[ 4.012329] Run /sbin/init as init process
[ 4.012331] with arguments:
[ 4.012332] /sbin/init
[ 4.012334] with environment:
[ 4.012336] HOME=/
[ 4.012337] TERM=linux
SELinux: Could not open policy file <= /etc/selinux/targeted/policy/policy.35: No such file or directory
[ 4.284272] systemd[1]: System time before build time, advancing clock.
[ 4.295698] systemd[1]: Failed to find module 'autofs4'
[ 4.327561] systemd[1]: systemd 252.39-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.327577] systemd[1]: Detected architecture arm64.
[ 4.346931] dwmmc_k3 ff37f000.dwmmc1: Unexpected interrupt latency
[ 4.360294] systemd[1]: Detected initialized system, this is not the first boot.
[ 4.360303] systemd[1]: Kernel version 6.19.0-rc6-g837cd6cd6753-dirty, our baseline is 4.15
Welcome to Debian GNU/Linux 12 (bookworm)!
[ 4.398666] systemd[1]: Hostname set to <hikey970>.
[ 4.407442] systemd[1]: Successfully added address 127.0.0.1 to loopback interface
[ 4.407462] systemd[1]: Successfully added address ::1 to loopback interface
[ 4.407477] systemd[1]: Successfully brought loopback interface up
[ 4.407578] systemd[1]: Setting '/proc/sys/fs/file-max' to '9223372036854775807'
[ 4.407765] systemd[1]: No credentials passed via fw_cfg.
[ 4.415079] systemd[1]: Reading EFI variable /sys/firmware/efi/efivars/LoaderTimeInitUSec-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f.
[ 4.415100] systemd[1]: open("/sys/firmware/efi/efivars/LoaderTimeInitUSec-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f") failed: No such file or directory
[ 4.415107] systemd[1]: Failed to read LoaderTimeInitUSec: No such file or directory
[ 4.428421] systemd[1]: Found cgroup2 on /sys/fs/cgroup/, full unified hierarchy
[ 4.428429] systemd[1]: Unified cgroup hierarchy is located at /sys/fs/cgroup.
[ 4.454672] systemd[1]: bpf-firewall: Can't load kernel CGROUP SKB BPF program, BPF firewalling is not supported: Function not implemented
[ 4.454688] systemd[1]: Can't load kernel CGROUP DEVICE BPF program, BPF device control is not supported: Function not implemented
[ 4.454696] systemd[1]: Controller 'cpu' supported: yes
[ 4.454701] systemd[1]: Controller 'cpuacct' supported: no
[ 4.454705] systemd[1]: Controller 'cpuset' supported: yes
[ 4.454709] systemd[1]: Controller 'io' supported: yes
[ 4.454713] systemd[1]: Controller 'blkio' supported: no
[ 4.454717] systemd[1]: Controller 'memory' supported: yes
[ 4.454720] systemd[1]: Controller 'devices' supported: no
[ 4.454725] systemd[1]: Controller 'pids' supported: yes
[ 4.454728] systemd[1]: Controller 'bpf-firewall' supported: no
[ 4.454732] systemd[1]: Controller 'bpf-devices' supported: no
[ 4.454736] systemd[1]: Controller 'bpf-foreign' supported: yes
[ 4.454741] systemd[1]: Controller 'bpf-socket-bind' supported: no
[ 4.454745] systemd[1]: Controller 'bpf-restrict-network-interfaces' supported: no
[ 4.454767] systemd[1]: Set up TFD_TIMER_CANCEL_ON_SET timerfd.
[ 4.466039] systemd[1]: Enabling (yes) showing of status (commandline).
[ 4.466160] systemd[1]: Serializing system-environment-generators to memfd.
[ 4.466539] systemd[1]: Successfully forked off '(sd-executor)' as PID 1693.
[ 4.473998] systemd[1]: (sd-executor) succeeded.
[ 4.474350] systemd[1]: Successfully forked off '(sd-executor)' as PID 1694.
[ 4.481335] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-cryptsetup-generator (null)
[ 4.481590] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1695.
[ 4.481607] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-debug-generator (null)
[ 4.481832] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1696.
[ 4.481852] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-fstab-generator (null)
[ 4.482073] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1697.
[ 4.482092] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-getty-generator (null)
[ 4.482321] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1698.
[ 4.482340] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-gpt-auto-generator (null)
[ 4.482563] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1700.
[ 4.482581] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-hibernate-resume-generator (null)
[ 4.482819] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1701.
[ 4.482838] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-integritysetup-generator (null)
[ 4.483094] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1702.
[ 4.483140] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-rc-local-generator (null)
[ 4.483378] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1703.
[ 4.483397] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-run-generator (null)
[ 4.483631] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1704.
[ 4.483651] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-system-update-generator (null)
[ 4.483894] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1705.
[ 4.483914] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-sysv-generator (null)
[ 4.484164] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1706.
[ 4.484183] (sd-execut[1694]: About to execute /usr/lib/systemd/system-generators/systemd-veritysetup-generator (null)
[ 4.484424] (sd-execut[1694]: Successfully forked off '(direxec)' as PID 1707.
[ 4.562808] systemd-hibernate-resume-generator[1701]: Not running in an initrd, quitting.
[ 4.587151] systemd-fstab-generator[1697]: Parsing /etc/fstab...
[ 4.606831] systemd-getty-generator[1698]: Automatically adding serial getty for /dev/ttyAMA6.
[ 4.606963] systemd-getty-generator[1698]: SELinux enabled state cached to: disabled
[ 4.608070] systemd-gpt-auto-generator[1700]: Disabling root partition auto-detection, root= is defined.
[ 4.614319] systemd-rc-local-generator[1703]: Automatically adding rc-local.service.
[ 4.643468] systemd-rc-local-generator[1703]: SELinux enabled state cached to: disabled
[ 4.643468] systemd-fstab-generator[1697]: Found entry what=/dev/disk/by-uuid/F1A5-2022 where=/boot type=vfat makefs=no growfs=no noauto=no nofail=no
[ 4.678968] systemd-gpt-auto-generator[1700]: Failed to chase block device, ignoring: No such file or directory
[ 4.760419] systemd-sysv-generator[1706]: Cannot find unit lightdm.service.
[ 4.760451] systemd-sysv-generator[1706]: SysV service '/etc/init.d/lightdm' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 4.846639] systemd-fstab-generator[1697]: SELinux enabled state cached to: disabled
[ 4.870110] (sd-execut[1694]: /usr/lib/systemd/system-generators/systemd-system-update-generator succeeded.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment