zynthian front panel

gistfile1.txt

$fn=50;
altura = 5;
encoder=6.25;
midi=16;
lcdw=78;
lcdh=50;
bumperw=5;

//mixes it up
leftlcd=20;
toplcd=39;

// relative
leftenc=leftlcd+10;
rightenc=leftenc+58;

leftb=leftlcd-3-bumperw;
rightb=leftlcd+lcdw+3;

topb=toplcd-3-bumperw;


difference() {
  cube(size=[140,128,altura]);

  // retirar suportes laterais
  #translate([0,0,3]) cube(size=[10,128,altura]);
  #translate([130,0,3]) cube(size=[10,128,altura]);

  // retirar espaço do LCD
  translate([leftlcd,toplcd,-1]) cube(size=[lcdw,lcdh,altura+2]);

  // retirar encoders
  translate([leftenc,25,-1]) cylinder(d=encoder,h=altura*2);
  translate([leftenc,104,-1]) cylinder(d=encoder,h=altura*2);
  translate([rightenc,25,-1]) cylinder(d=encoder,h=altura*2);
  translate([rightenc,104,-1]) cylinder(d=encoder,h=altura*2);

  // retirar MIDI
  translate([rightenc+30,25,-1]) cylinder(d=midi,h=altura*2);
  
  // retirar audio out
  translate([rightenc+30,55,-1]) cylinder(d=encoder,h=altura*2);
  translate([rightenc+30,75,-1]) cylinder(d=encoder,h=altura*2);
  
  // make logo
  #translate([leftlcd+80,106.5,0]) rotate(180) mirror(v=[90,0,0]) linear_extrude(height = 1) {
    text("zynthian",  size = 7, direction = "ltr", spacing = 1 );
  };
  
}

// LCD bumpers
  translate([leftb,35,altura]) cube(size=[bumperw,60,altura/2]);
  translate([leftlcd+45,topb,altura]) cube(size=[15,bumperw,altura/2]);
  translate([rightb,35,altura]) cube(size=[bumperw,60,altura/2]);
  translate([leftlcd+45,toplcd+lcdh+3,altura]) cube(size=[15,bumperw,altura/2]);