setup shorewall for docker networking beyond the default bridge network, e.g., for docker-compose

00-docker-shorewall.md

Docker(-compose) with shorewall

The shorewall documentation explains in http://shorewall.org/Docker.html how to configure shorewall for use with docker. The problem with the configuration is that it only allows connections from the host to the main bridge docker0. Connections to other networks on dynamically created bridges, with names starting by default with br-, is blocked. Instead of the recommended contents of /etc/shorewall/interfaces, use wild-card interface names as follows:

#ZONE	INTERFACE	OPTIONS
#dock	docker0		bridge     # disabled default recommendation
dock 	docker0		physical=docker+,routeback=1
dock 	br		physical=br-+,routeback=1

This declares interfaces with names starting with docker, including the default docker0, and starting with br- to be in the dock zone.

For the rest of the configuration, follow the shorewall documentation as is.

This setup fixes problems running composite apps set up manually or using docker-compose.

interfaces

###############################################################################
?FORMAT 2
###############################################################################
#ZONE   INTERFACE       OPTIONS
net     eth0            dhcp,tcpflags,nosmurfs,routefilter,logmartians,sourceroute=0
#dock   docker0         bridge
dock    docker0         physical=docker+,routeback=1
dock    br              physical=br-+,routeback=1
# and others ...

policy

###############################################################################
#SOURCE         DEST            POLICY          LOG LEVEL       LIMIT:BURST

$FW             net             ACCEPT

dock            $FW             REJECT
dock            all             ACCEPT
# Some applications or use case require uncommenting the next line
$FW             dock            ACCEPT

# THE FOLLOWING POLICY MUST BE LAST
all             all             REJECT          info

shorewall.conf

# apply the change below, as

# ...

# LN:
#DOCKER=No
DOCKER=Yes

# ...

zones

###############################################################################
#ZONE   TYPE    OPTIONS                 IN                      OUT
#                                       OPTIONS                 OPTIONS
fw      firewall
dock    ipv4
# and others ...

Thank you very much.

Great post!
However in my case it's missing a vital detail !
I disabled docker iptables in /etc/docker/daemon.json
{
"iptables":false
}
And after that all works Great! Docker containers are accessible from net if enabled in shorewall ( rules, zones, policy ) etc !!
Regards,
Harry

This line is giving a Broadcast error when starting Shorewall 5.2.3.2

dock docker0 physical=docker+,routeback=1

ERROR: Invalid BROADCAST address /etc/shorewall/interfaces

I added different and it worked as expected.

dock docker physical=docker+,routeback=1

The actual name should not matter, since the wildcard physical=docker+ is there to match any interface with a name starting with docker.

Details might also depend on the way how the distribution sets up networking and on the order in which components get started.

Disclaimer: My production machines are debian, versions 9-11. So details might vary. I'm glad to get additional information on what to change/fix on other distributions.

I am using debian 10 and just cannot get this to work -- the only way to get it working for me, and I still don't think its right, is using::

dock    docker0
dock    br

shorewall version
5.2.3.2

Did you try running shorewall compile? This gives better diagnostics than trying to restart the service. And it allows you to detect and fix problems rather than leaving the firewall in an unreliable or diabled state (especially when restarting).

I recently migrated my debian 10 docker host to 11 and don't have a debian 10 docker host at hand to verify the behaviour.

shorewall compile

Compiling using Shorewall 5.2.3.2...
Processing /etc/shorewall/params ...
Processing /etc/shorewall/shorewall.conf...
Loading Modules...
Compiling /etc/shorewall/zones...
Compiling /etc/shorewall/interfaces...
ERROR: Invalid BROADCAST address /etc/shorewall/interfaces (line 191)

Do you have the format specifier at the top of the interfaces file? The line

?FORMAT 2

is required. If I leave it out, I can reproduce the error message about the BROADCAST address in my setup. It almost looks like a comment i the file I have included at the top.

Crap... missed that. It's working now!! Thanks mate.

Great post! However in my case it's missing a vital detail ! I disabled docker iptables in /etc/docker/daemon.json { "iptables":false } And after that all works Great! Docker containers are accessible from net if enabled in shorewall ( rules, zones, policy ) etc !! Regards, Harry

@grharry This is the ""detail"" I was missing! Thank you so much!

Thanks! New docker user and this gist and comments allowed me to connect to running containers.

But now running containers cannot reach the wider internet. How do I do that?

Edit: resolved with help from serverfault.com/a/631877 specifically creating a /etc/shorewall/masq file and turning on ip forwarding.

Has anyone succeeded in restricting network access to containers for the entire Internet and only allowing access to a specific list of addresses (ipset)?

You saved my day, thank you so much!

Hero!