Created
August 15, 2016 08:51
-
-
Save lukego/8b4e567f4d5c4b60da6545e063888391 to your computer and use it in GitHub Desktop.
Mellanox error syndrome lists
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| BAD_RES_STATE | 0x25B161 | destroy_ctx - context doesn't exist or doesn't match type | |
| BAD_RES_STATE | 0x4A6FC9 | destroy_ctx - context in use | |
| BAD_RES_STATE | 0x60DA55 | destroy_dct - dct not in drained state | |
| BAD_PARAM | 0x67A6F2 | slrg doesnt support write; | |
| BAD_PARAM | 0x0F0E35 | ppamp doesnt support write; | |
| BAD_PKT | 0x4A22F | access reg MAD with specified register id not supported | |
| BAD_PKT | 0x16C592 | mad_ifc: process_smp_lid mkey check failed - silently discarded | |
| INTERNAL_ERR | 0x079233 | set_get_port_info: silently discarded. | |
| BAD_PKT | 0x468496 | mad_ifc: ATTRV_SM_INFO handled by SW | |
| BAD_PKT | 0x071808 | mad_ifc: smp trap repress silently discarded after processing. | |
| BAD_PKT | 0x071809 | mad_ifc: GET_RESP and TRAP method are silently discarded. | |
| BAD_PKT | 0x7ECC11 | mad_ifc: process_cc cc_key check failed | |
| BAD_PKT | 0x4EB0AE | mad_ifc: cc trap repress silently discarded after processing. | |
| BAD_PKT | 0x3D89EB | mad_ifc: hca is not active | |
| BAD_PARAM | 0x6E0A69 | access_register PPAD: supported only with fpp enabled | |
| BAD_PARAM | 0x1CD13E | access_register PPAD: local port reserved when single_mac=0. | |
| BAD_PARAM | 0x1CC031 | access_register PPAD: invalid port | |
| BAD_PARAM | 0x04E66D | access_register PPAD: invalid port | |
| BAD_PARAM | 0x231E68 | access register PPAMP: invalid access | |
| BAD_PARAM | 0x4D69AC | access register SLRG: invalid access | |
| BAD_PARAM | 0x6217C2 | invalid access; | |
| BAD_PARAM | 0x369C99 | invalid access ; | |
| BAD_PARAM | 0x4497BE | invalid access | |
| BAD_PARAM | 0x7203E5 | access_register PAOS: invalid port | |
| BAD_PARAM | 0x09A9FB | access register PAOS: paos_query invalid swid | |
| BAD_PARAM | 0x7D10EF | access_register PAOS: invalid port | |
| BAD_PARAM | 0x51BF55 | access_register PAOS: invalid admin_status; | |
| BAD_PARAM | 0x6E2A11 | access register PAOS: paos_query invalid swid | |
| BAD_PARAM | 0x43A7AF | access register PAOS: invalid admin status | |
| BAD_PARAM | 0x33EDC5 | access_register PMTU: invalid port | |
| BAD_PARAM | 0x49B0F2 | access_register PTYS: invalid port | |
| BAD_PARAM | 0x7CD836 | PTYS: invalid protocol mask value | |
| BAD_PARAM | 0x2FDE74 | access_register PMTU: invalid port | |
| BAD_PARAM | 0x648AFC | PMTU: admin MTU given is greater than device's max MTU | |
| BAD_PARAM | 0x57ACCD | PMTU: admin MTU given is not a valid IB spec MTU | |
| BAD_PARAM | 0x143B37 | access_register PTYS: invalid port | |
| BAD_PARAM | 0x208984 | PTYS: invalid protocol mask value | |
| BAD_PARAM | 0x7B9543 | access_register PVLC: invalid port | |
| BAD_PARAM | 0x087016 | PVLC: port is not IB. | |
| BAD_PARAM | 0x4B4004 | reserved fields are not zero (1st DW) | |
| BAD_PARAM | 0x4E0B36 | reserved fields are not zero (2nd DW) | |
| BAD_PARAM | 0x70BE33 | bad op_mod | |
| BAD_PARAM | 0x0C6B73 | reserved fields are not zero (4th DW) | |
| BAD_INPUT_LEN | 0x672230 | bad input length | |
| BAD_OUTPUT_LEN | 0x7C331E | bad output length | |
| BAD_PARAM | 0x17B535 | reserved fields are not zero 3rd DW*/ | |
| BAD_INPUT_LEN | 0x6CE368 | get_dropped_packet_log: bad input length | |
| BAD_OUTPUT_LEN | 0x7BF634 | get_dropped_packet_log: bad output length | |
| BAD_SYS_STATE | 0x256AF0 | TODO FPP | |
| BAD_INPUT_LEN | 0x279651 | init_hca: bad input length | |
| BAD_PARAM | 0x306FFF | init_hca: reserved fields are not zero (3rd DW) | |
| BAD_PARAM | 0x21E00A | init_hca: bad op_mod | |
| BAD_PARAM | 0x7DD100 | reserved fields are not zero 1st DW | |
| BAD_PARAM | 0x626483 | reserved fields are not zero 2nd DW | |
| BAD_PARAM | 0x204BB3 | reserved fields are not zero 3rd DW | |
| BAD_PARAM | 0x0DBB21 | reserved fields are not zero 4th DW | |
| BAD_PARAM | 0x1B7325 | create_query_mkey: reserved fields are not zero 1st DW | |
| BAD_PARAM | 0x0CAE4B | create_query_mkey: reserved fields are not zero 2nd DW | |
| BAD_PARAM | 0x3F03F8 | create_query_mkey: reserved fields are not zero 3rd DW | |
| BAD_PARAM | 0x6EE6D8 | create_query_mkey: reserved fields are not zero 4th DW | |
| BAD_PARAM | 0x18E774 | create/modify eq/cq (resize): log_cq_size > LOG_MAX_EQCQ_SIZE | |
| BAD_PARAM | 0x6AA71A | create/modify eq/cq (resize): bad cq size. Only 64B, 128B supported | |
| BAD_PARAM | 0xAC4144 | create/modify eq/cq (resize): page offset must be 0 | |
| BAD_INPUT_LEN | 0x9074AA | create/modify eq/cq (resize): bad input length | |
| BAD_OUTPUT_LEN | 0x38AEDB | create/modify eq/cq (resize): bad output length | |
| BAD_PARAM | 0x7FAB49 | create eq/cq: bad opcode modifier | |
| BAD_PARAM | 0x4C4269 | create eq/cq: state is reserved. | |
| BAD_PARAM | 0x4BF94B | create eq/cq: consumer_counter != 0 | |
| BAD_PARAM | 0x6F7FB3 | create eq/cq: producer_counter != 0 | |
| BAD_PARAM | 0x397E61 | create eq/cq: bad uar number | |
| BAD_PARAM | 0x67C01E | create eq: bad msix number | |
| BAD_PARAM | 0x571493 | create eq: intr is reserved when msix isn't enabled | |
| BAD_PARAM | 0x008FEF | create_eq: unsupported event type | |
| BAD_RESOURCE | 0x601D5F | destroy_cq: attempt to access reserved cqn | |
| BAD_PARAM | 0x11145F | destroy_cq: bad op_mod | |
| BAD_RESOURCE | 0x01A08D | destroy_eq: attempt to access reserved eqn | |
| BAD_RES_STATE | 0x1D7771 | modify_cq: bad cq number - cq doesn't exist | |
| BAD_RESOURCE | 0x55AD7A | modify_cq: attempt to access reserved cqn | |
| BAD_RES_STATE | 0x2F1396 | modify_cq: cq is in error state and cannot be modified | |
| BAD_INPUT_LEN | 0x2BA264 | modify_cq bad input length | |
| BAD_INPUT_LEN | 0x244364 | resize cq bad input length | |
| BAD_PARAM | 0x101EE5 | int_moderation: bad op_mod | |
| BAD_RESOURCE | 0x3B024B | int_moderation: attempt to access non exsistent msi-x | |
| BAD_INPUT_LEN | 0x4DF3DC | create mkey: bad input length | |
| BAD_PARAM | 0x44D3A3 | create mkey: bad opcode modifier. | |
| BAD_PARAM | 0x60D3DE | create mkey: illegal access_mode | |
| BAD_PARAM | 0x5038AD | create mkey: bsf is not supported | |
| BAD_PARAM | 0x2225F2 | create mkey: signature is not supported | |
| BAD_PARAM | 0x3B1B20 | create mkey: bsf is not supported | |
| BAD_PARAM | 0x10301E | create mkey: max bsf_octword_size supported is 256K | |
| BAD_PARAM | 0x56DD41 | create mkey: max translations_octword_size supported is 2G (max num of mtts is 4G) | |
| BAD_PARAM | 0x5F4568 | create mkey: octoword_actual_size bigger than translations_octword_size | |
| BAD_PARAM | 0x3783F6 | create mkey: PA mode with translations_octword_size > 0 | |
| BAD_PARAM | 0x03BF6F | create mkey: translations_octword_size == 0 and not PA mode. | |
| BAD_PARAM | 0x0380C1 | create mkey: NO PA mode, MR not free but no mtts was given | |
| BAD_PARAM | 0x25A977 | create mkey: MR free and umr_en disable | |
| BAD_PARAM | 0x772CF9 | create mkey: length is bigger than 2^64 | |
| BAD_PARAM | 0x66E7E8 | create mkey: wrong page size | |
| BAD_PARAM | 0x10A58D | create mkey: window size exceed translations_octword_size | |
| BAD_PARAM | 0x5B31FA | create mkey: not enough mtts in the mail box. | |
| BAD_PARAM | 0x776E2C | create mkey: wrong page size should be reserved in KLM/PA mode | |
| BAD_PARAM | 0x105B45 | create_mkey: pg_access is valid only for access_mode MTT | |
| BAD_INPUT_LEN | 0x052FD5 | query_mkey: bad input length | |
| BAD_OUTPUT_LEN | 0x24EF33 | query_mkey: bad output length | |
| BAD_PARAM | 0x247885 | query_mkey: bad opcode modifier | |
| BAD_PARAM | 0x68BFFD | query_mkey: bad opcode modifier | |
| BAD_RES_STATE | 0x15B0BA | query_mkey: bad mkey index | |
| BAD_RESOURCE | 0x6F23F2 | query_mkey: attempt to access reserved mkey | |
| BAD_PARAM | 0x2F3DC3 | query_mkey: pg_access does not match mkey pg_access | |
| BAD_RES_STATE | 0x23528A | query context/page_fault_resume: bad context number | |
| BAD_RESOURCE | 0x7D55AA | query context/page_fault_resume: attempt to access reserved context number | |
| BAD_OUTPUT_LEN | 0x3676F2 | query context/page_fault_resume: bad output length | |
| BAD_PARAM | 0x6DB4DA | query context/page_fault_resume: bad opcode modifier | |
| BAD_INPUT_LEN | 0x3249FD | page_fault_resume: bad input length | |
| BAD_PARAM | 0x10CD65 | qp_page_fault_resume: bad opcode modifier | |
| BAD_RES_STATE | 0x3D5E24 | unexpected page_fault_resume_cmd (no event sent from FW) | |
| BAD_INPUT_LEN | 0x2FC801 | create_psv: bad input length | |
| BAD_OUTPUT_LEN | 0x36918C | create_psv: bad output length | |
| BAD_PARAM | 0x4F5495 | create_psv: bad opcode modifier | |
| BAD_PARAM | 0x1F7A7F | create_psv: num of psv is 0 | |
| BAD_PARAM | 0x4CB25F | create_psv: num of psv is 3 | |
| BAD_PARAM | 0x0C1415 | create_psv: num of psv > 4 | |
| BAD_PARAM | 0x6B87EC | create_psv: reserved fields are not zero DW1 | |
| BAD_PARAM | 0x19FE3C | create_psv: reserved fields are not zero DW2 | |
| BAD_PARAM | 0x27D2DF | create_psv: reserved fields are not zero DW3 | |
| BAD_PARAM | 0x7D1C5F | create_psv: reserved fields are not zero DW4 | |
| BAD_RESOURCE | 0x179B25 | destroy_psv: attempt to access reserved psv index | |
| BAD_PARAM | 0x4AD785 | destory_psv: opcode_mod != 0 | |
| BAD_RES_STATE | 0x4FF64E | destory_psv: psv does not exist. | |
| BAD_INPUT_LEN | 0x5B7B17 | query_psv: bad input length | |
| BAD_OUTPUT_LEN | 0x14AAFD | query_psv: bad output length | |
| BAD_PARAM | 0x28A1A6 | query_psv: bad opcode modifier | |
| BAD_RESOURCE | 0x19A866 | query_psv: attempt to access reserved psv index | |
| BAD_RES_STATE | 0x3A1317 | query_psv: psv does not exist. | |
| BAD_RES_STATE | 0x12E4A1 | query_eq/gen_eqe: bad eqn | |
| BAD_RESOURCE | 0x3A12ED | query_eq/gen_eqe: attempt to access reserved eq number | |
| BAD_OUTPUT_LEN | 0x5BA99E | query_eq: bad output length | |
| BAD_PARAM | 0x6908EC | query_eq: bad opcode modifier | |
| BAD_OUTPUT_LEN | 0x47E299 | query_cq: bad output length | |
| BAD_PARAM | 0x44C59F | query_cq: bad opcode modifier | |
| BAD_RES_STATE | 0x1FB6EC | query_cq: bad qp index | |
| BAD_PARAM | 0x537E97 | dc_access option valid only for DC | |
| BAD_PARAM | 0x60D2F5 | qp commands: (Q_KEY) is supported just in UNCONNECTED mode. | |
| BAD_PARAM | 0x3670A5 | (alt_addr_path, rwe, pm_state) supported just in static connected. | |
| BAD_PARAM | 0x4DC4E4 | (ack_timeout/rnr_retry/retry_count/log_sra_max/rae) is supported just in reliable mode. | |
| BAD_PARAM | 0x25DF13 | (rre/min_rnr_nak/log_rra_max) is supported just in static reliable mode | |
| BAD_PARAM | 0x58CC13 | srq number bit is reserved if rq type != srq. | |
| BAD_PARAM | 0x3BAC66 | srq number bit is reserved in xrc mode. | |
| BAD_PARAM | 0x3836FE | xrc qp does not need receive cq | |
| BAD_PARAM | 0x6C4351 | qp without receive queue does not need receive cq. | |
| BAD_PARAM | 0x65EB34 | pm_state cannot be change in special qp | |
| BAD_PARAM | 0x76EE96 | port cannot be change in special qp | |
| BAD_PARAM | 0x5FF312 | sl cannot be change in special qp | |
| BAD_PARAM | 0x43104D | special qp does not have secondary_address_path | |
| BAD_PARAM | 0x1DB648 | address_path.f_dscp is RoCE unconnected only | |
| BAD_PARAM | 0x66375B | address_path.f_ecn is RoCE unconnected only | |
| BAD_PARAM | 0x3025D0 | address_path.f_eup is RoCE unconnected only | |
| BAD_PARAM | 0x2E015A | address_path.rmac_47_32 is RoCE connected only | |
| BAD_PARAM | 0x53A33C | address_path.rmac_31_0 is RoCE connected only | |
| BAD_PARAM | 0x7FD2B9 | address_path.udp_sport is RoCE connected only | |
| BAD_PARAM | 0x7A4E3E | address_path.ecn is RoCE only | |
| BAD_PARAM | 0x57527E | address_path.dscp is RoCE only | |
| BAD_PARAM | 0x192112 | address_path.dei_cfi is RoCE only | |
| BAD_PARAM | 0x72B104 | address_path.prio is RoCE only | |
| BAD_PARAM | 0x270173 | address_path.pkey_index is reserved for RoCE | |
| BAD_PARAM | 0x0A3AF1 | address_path.sl is reserved for RoCE | |
| BAD_PARAM | 0x2AFB5D | address_path.fl is IB native connected only field | |
| BAD_PARAM | 0x584EFC | address_path.mlid is IB native_connected only field | |
| BAD_PARAM | 0x1F3B5D | address_path.rlid is IB native connected only field | |
| BAD_PARAM | 0x1796E4 | address_path.grh is IB native connected only field | |
| BAD_PARAM | 0x08DE6B | address_path.src_addr_index is reserved for UD/DCI/no GRH | |
| BAD_PARAM | 0x32E7BB | address_path.hop_limit is reserved for UD/DCI/no GRH | |
| BAD_PARAM | 0x69216A | address_path.flow_label is reserved for UD/DCI/ no GRH | |
| BAD_PARAM | 0x764216 | address_path.tclass is reserved for UD/DCI/ no GRH | |
| BAD_PARAM | 0x7812D7 | address_path.rgid_rip is reserved for UD/DCI | |
| BAD_PARAM | 0x29E0DF | address_path.udp_sport is not in the range defined by hca_cap | |
| BAD_PARAM | 0x1FFEA3 | address_path.udp_sport is reserved for roce v1 and v1.5 | |
| BAD_PARAM | 0x1A58FB | address_path.ecn is reserved for roce v1 | |
| BAD_PARAM | 0x632491 | address_path.dscp is reserved for roce v1 | |
| BAD_PARAM | 0x3620D8 | rwe valid in static connected qp only | |
| BAD_PARAM | 0x36C5D1 | rae valid in reliable qp only | |
| BAD_PARAM | 0x7D9D73 | rae valid in RC/XRC qp only | |
| BAD_PARAM | 0x5D447D | dc msg_max > dcr_msg_max | |
| BAD_PARAM | 0x00BF9B | init2rtr: bad msg_max | |
| BAD_PARAM | 0x2B9ADC | init2rtr: non default vport must use set grh (grh bit) | |
| BAD_PARAM | 0x7158C4 | init2rtr: remote_qpn is valid in static connected node only | |
| BAD_PARAM | 0x7F56A9 | next_rcv_psn field is reserved for dci/unconnected qp | |
| BAD_PARAM | 0x390BD3 | init2rtr: min_rnr_nak field is reserved for dci/unconnected qp | |
| BAD_PARAM | 0x382E4C | illegal pm_state | |
| BAD_PARAM | 0x20FD05 | illegal pm_state transition. APM_STATE_MIGRATED can only be changed to APM_STATE_REARM | |
| BAD_PARAM | 0x1AED84 | illegal pm_state transition. While in APM_STATE_REARM, only HW can modify pm_state | |
| BAD_PARAM | 0x106230 | illegal pm_state transition. APM_STATE_ARMED can only be changed to APM_STATE_MIGRATED | |
| BAD_PARAM | 0x2C4432 | bad mtu (==0) | |
| BAD_PARAM | 0x434F5F | bad mtu enumeration mtu in [1..5] | |
| BAD_PARAM | 0x15C162 | primary_path pkey_index is larger than device cap | |
| BAD_PARAM | 0x100715 | primary_path pkey_index is reserved for RoCE | |
| BAD_PARAM | 0x2E31D2 | alternate_path pkey_index is larger than device cap | |
| BAD_PARAM | 0x476916 | QP1: q_key must be 0x80010000 | |
| BAD_PARAM | 0x069EFE | atomic_mode must comes with rae change | |
| BAD_PARAM | 0x576363 | atomic_mode is reserved without rae | |
| BAD_PARAM | 0x4CF067 | atomic_mode is greater than max supported | |
| BAD_PARAM | 0x3DB8C9 | dc extended atomic > dcr_extended_atomic | |
| BAD_PARAM | 0x177405 | qp commands : bad port number | |
| BAD_PARAM | 0x5021A1 | qp commands : alternate_path - bad port number | |
| BAD_PARAM | 0x2672B8 | dc rra_max is reserved in dci qp | |
| BAD_PARAM | 0x6DA61B | rra_max > hca_cap.log_max_ra_res | |
| BAD_PARAM | 0x285837 | dc log_sra_max > hca_cap.log_max_ra_req_dc | |
| BAD_PARAM | 0x0B673F | log_sra_max > hca_cap.log_max_ra_req | |
| BAD_RESOURCE | 0x4AF0EB | modify_qp: cannot use cq in XRC mode | |
| BAD_INPUT_LEN | 0x12661C | create qp: bad input length | |
| BAD_PARAM | 0x11EB32 | create_qp: bad opcode_modifier | |
| BAD_PARAM | 0x02DCDC | create_qp: un aligned dbr_adr | |
| BAD_PARAM | 0x28B996 | create_qp: bad service type | |
| BAD_PARAM | 0x48B5C0 | create_qp: invalid service type for RoCE | |
| BAD_PARAM | 0x311E80 | create_qp: bad rq_type. | |
| BAD_PARAM | 0x7FC507 | create_qp: bad rq_type, XRC must come with rq_type srq | |
| BAD_PARAM | 0x30CB3E | create qp: bad uar number | |
| BAD_PARAM | 0x397FA9 | create_qp: DC is not supported in hca cap configuration. | |
| BAD_PARAM | 0x410975 | create_qp: bad rq_type, DC must be srq | |
| BAD_PARAM | 0x344C32 | create_qp: bad cs_req (must be 0x22/0x0) | |
| BAD_PARAM | 0x690D51 | create_qp: fre not allowed in MLX mode | |
| BAD_PARAM | 0x6DCF3A | create_qp: bad log_rq_stride > 5. | |
| BAD_PARAM | 0x283F1A | create_qp: bad log_rq_size and log_rq_stride | |
| BAD_PARAM | 0x33BC5A | create_qp: log_rq_stride is reserved when rq_type != regular | |
| BAD_PARAM | 0x41B867 | create_qp: log_rq_size is reserved when rq_type != regular | |
| BAD_PARAM | 0x27D5A7 | create_qp: cd slave enable must come with rq_type regular. | |
| BAD_PARAM | 0x735349 | create qp: opt_param_mask !=0 | |
| BAD_PARAM | 0x6897E7 | qpc state != 0 | |
| BAD_PARAM | 0x6DD6F3 | sw_sq_wqebb_counter - query only | |
| BAD_PARAM | 0x55B9EB | hw_sq_wqebb_counter - query only | |
| BAD_PARAM | 0x57D8C2 | hw_rq_counter_hw_rcyclic_byte_counter - query only | |
| BAD_PARAM | 0x2FD215 | sw_rq_counter_sw_rcyclic_byte_counter -query only | |
| BAD_PARAM | 0x7698D9 | create_qp: no sq -> log_sq_size is reserved. | |
| BAD_PARAM | 0x317227 | create_qp: sq_size > MAX_QP_SIZE | |
| BAD_PARAM | 0x302CBD | create_qp: rq_size > MAX_QP_SIZE | |
| BAD_PARAM | 0x7BE362 | create_qp : bad cs_res | |
| BAD_PARAM | 0x3F86E4 | create_qp: bad cs_req | |
| BAD_PARAM | 0x3ADA02 | create_qp: bad cs_res need to be != 0x1 in UD/MLX/DC mode | |
| BAD_PARAM | 0x327D8F | create_qp: atomic_like_write_en valid in connected mode only when ts!=DCI. | |
| BAD_PARAM | 0x567DA3 | create_qp: bad cs_res: reserved in DCI case. | |
| BAD_PARAM | 0x11ED19 | create_qp: bad cs_res 0x2 not supported in UD when cgs=0x0 | |
| BAD_PARAM | 0x1FF868 | create_qp: cgs is reserved for non-UD QPs | |
| BAD_PARAM | 0x2D2509 | create_qp: block_lb_mc only supported on unconnected service types | |
| BAD_PARAM | 0x05A897 | create_qp: cs_req valid in connected mode only. | |
| BAD_PARAM | 0x7E70FD | create_qp: reserved not zero. | |
| BAD_PARAM | 0x7D7C6E | SYNC_UMR must come with rq type == no_rq. | |
| BAD_PARAM | 0x1F187A | create_qp: free_ar cannot be set in reliable qp. | |
| BAD_PARAM | 0x228DD9 | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id 0x0 is reserved | |
| BAD_PARAM | 0x68E078 | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id > max counter_set_id | |
| BAD_PARAM | 0x01507C | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id doesn't exist | |
| BAD_PARAM | 0x3E0D16 | create_dct: bad opcode_modifier | |
| BAD_PARAM | 0x0E3FAC | create_dct: DC is not supported in hca cap configuration. | |
| BAD_PARAM | 0x210B13 | create_dct: state field is reserved during create | |
| BAD_PARAM | 0x27DA36 | create_dct: bad port number | |
| BAD_PARAM | 0x2E4253 | create_dct: dc_access_key_violation_count is reserve during create | |
| BAD_PARAM | 0x6F14CE | create_dct: when rae=1, atomic_mode must be != 0 | |
| BAD_PARAM | 0x56763A | create_dct: atomic_mode is reserved without rae | |
| BAD_PARAM | 0x0AA52F | create_dct: bad cs_res | |
| BAD_PARAM | 0x319166 | create_dct: bad mtu enumeration | |
| BAD_PARAM | 0x29B3F4 | DCT pkey_index is larger than device cap | |
| BAD_OP | 0x441CC5 | bad opcode | |
| BAD_RESOURCE | 0x671120 | modify_qp/arm_rq/arm_dct/mcg command: attempt to access reserved qpn number | |
| BAD_RESOURCE | 0x21FA8C | modify_qp/arm_rq/arm_dct/mcg command: attempt to access reserved qpn number | |
| BAD_RES_STATE | 0x355534 | modify_qp/arm_rq/arm_dct/mcg command: invalid qp number. | |
| BAD_PARAM | 0x78DA49 | manage_pages: opcode modifier > 2 | |
| BAD_INPUT_LEN | 0x1275FD | manage_pages: bad input length | |
| BAD_OUTPUT_LEN | 0x31F42C | manage_pages: bad output length | |
| BAD_PARAM | 0x6D5FE7 | manage_pages: reserved fields are not zero | |
| BAD_PARAM | 0x557FCD | manage_pages: reserved fields are not zero | |
| BAD_PARAM | 0x453913 | manage_pages: reserved fields are not zero | |
| BAD_SYS_STATE | 0x278A55 | set_hca_cap: can be execute just before init_hca. | |
| BAD_INPUT_LEN | 0x7A2865 | Query HCA capabilities: bad input length | |
| BAD_PARAM | 0x30A05D | set_hca_cap: bad log_uar_page_sz | |
| BAD_PARAM | 0x5B724A | set_hca_cap: bad log_max_qp | |
| BAD_PARAM | 0x2381FC | set_hca_cap: bad log_max_ra_req_qp | |
| BAD_PARAM | 0x0974DA | set_hca_cap: bad log_max_ra_res_qp | |
| BAD_PARAM | 0x5A4D4A | set_hca_cap: bad pkey_table_size | |
| BAD_PARAM | 0x722D0B | set_hca_cap: bad gid_table_size | |
| BAD_PARAM | 0xC324D1 | set_hca_cap: DC is not supported for VFs | |
| BAD_PARAM | 0x403D24 | access_register: perf_counters global bad cmd field > 1 | |
| BAD_PARAM | 0x570B1F | access_register: perf_counters cfg bad uint_id | |
| BAD_PARAM | 0x0BBD5E | access_register: perf_counters cfg bad uint_id | |
| BAD_PARAM | 0x08D521 | access_register: perf_counters cfg bad cnt_cmd | |
| BAD_PARAM | 0x32ACF2 | access_register: perf_counters data bad uint_id | |
| BAD_PARAM | 0x21410C | access_register: perf_counters data bad uint_id | |
| BAD_PARAM | 0x00466E | access_register port capabilities: bad port number | |
| BAD_PARAM | 0x478688 | access_register port capabilities: reserved not zero 1st DW | |
| BAD_PARAM | 0x1FB867 | access_register port capabilities: reserved not zero 1st DW | |
| BAD_PARAM | 0x7936EB | access_register loopback ctrl: reserved not zero | |
| BAD_PARAM | 0x5C91E6 | access_register loopback ctrl: bad port number | |
| BAD_PARAM | 0x381614 | access_register loopback ctrl: reserved not zero 1st DW | |
| BAD_PARAM | 0x123FB8 | access_register loopback ctrl: reserved not zero 1st DW | |
| BAD_PARAM | 0x087224 | access_register loopback ctrl: reserved not zero 2st DW | |
| BAD_PARAM | 0x3CF1FE | access_register loopback ctrl: reserved not zero 3rd DW | |
| BAD_PARAM | 0x6BFEB4 | access_register loopback ctrl: reserved not zero 4th DW | |
| BAD_PARAM | 0x0B1ED8 | access_register register_pplr illegal port number | |
| BAD_PARAM | 0x0B7411 | access_register power_settings: power_settings_level 0x1-0xfe are reserved | |
| BAD_PARAM | 0x74A88B | access_register power_settings: reserved not zero 1st DW | |
| BAD_PARAM | 0x023A2E | access_register power_settings: reserved not zero 2st DW | |
| BAD_PARAM | 0x4ED3CB | access_register power_settings: reserved not zero 3rd DW | |
| BAD_PARAM | 0x471D6E | access_register power_settings: reserved not zero 4th DW | |
| BAD_PARAM | 0x1910BB | access_register: misc_counters counter data should be 0 on write | |
| BAD_PARAM | 0x305A09 | access_register: misc_counters write with no counter_select | |
| BAD_PARAM | 0x54FAAA | access_register_qpdp_qtct : illegal link layer type | |
| BAD_PARAM | 0x54EACD | access_register_qpdp_qtct : insufficient privileges | |
| BAD_PARAM | 0x54EACC | access_register_qtct_qpdp : unsupported project | |
| BAD_PARAM | 0x326553 | access_register_qetcr : illegal link layer type | |
| BAD_PARAM | 0x326CCD | access_register_qetcr : insufficient privileges | |
| BAD_PARAM | 0x326EF6 | access_register_qetcr : illegal max_bw_units | |
| BAD_PARAM | 0x326EF1 | access_register_qetcr : illegal max_bw_alloc | |
| BAD_PARAM | 0x326555 | access_register_qetcr : illegal tcg | |
| BAD_PARAM | 0x326554 | access_register_qetcr : unsupported project | |
| BAD_SYS_STATE | 0x0523AB | access_register: cannot access this register_id after init hca | |
| BAD_SYS_STATE | 0x192DEB | access_register: cannot access this register_id before init hca | |
| BAD_PARAM | 0x2C16B3 | access_register: reset_counter bad opcode modifyer | |
| BAD_PARAM | 0x24246C | access_register: DB threshold opcode modifyer, legal values 0,1 | |
| BAD_PARAM | 0x6F66BA | access_register PVLC port check: invalid port number | |
| BAD_PARAM | 0x603397 | access_register PVLC port check: register only supported for IB | |
| BAD_PARAM | 0x6C4D48 | this access_register isn't supported yet | |
| BAD_INPUT_LEN | 0x6D5541 | access_register: bad input length | |
| BAD_OUTPUT_LEN | 0x0CFF83 | access_register: bad output length | |
| BAD_PARAM | 0x33CF00 | create_rq/rmp: end_pad_mode must be <= 1 | |
| BAD_PARAM | 0x6AAEBB | create_rq/rmp: log2_hds_buf_size not supported | |
| BAD_PARAM | 0x68D9B8 | create_rq/rmp: hds_skip_first_sge not supported | |
| BAD_PARAM | 0x6A3698 | create_rq/rmp: lwm is not supported | |
| BAD_PARAM | 0x3B8510 | create_rq/rmp: dbr address must be dword aligned | |
| BAD_PARAM | 0x3E8512 | create_rq/rmp: cd_slave is reserved | |
| BAD_PARAM | 0x3B8512 | create_rq/rmp: uar_page is reserved | |
| BAD_PARAM | 0x293DA6 | create_rq/rmp: log wq stride max value is 9 | |
| BAD_PARAM | 0x04D77A | create_rq/rmp: rq_size > MAX_QP_SIZE | |
| BAD_PARAM | 0x193DA6 | create_rq/rmp: log wq stride for rq must be at least 4 | |
| BAD_PARAM | 0x5049A9 | create_rq/rmp: log wq stride for rq with ctrl must be at least 5 | |
| BAD_PARAM | 0x0642F0 | two_byte_shift_en is valid only in striding rq | |
| BAD_PARAM | 0x48A79B | log_wqe_num_of_strides is valid only in striding rq | |
| BAD_PARAM | 0x0443C8 | log_wqe_stride_size is valid only in striding rq | |
| BAD_PARAM | 0x184CB3 | create_rq/rmp: log wq stride for rq linked list must be at least 5 | |
| BAD_PARAM | 0x37F414 | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for rq linked list | |
| BAD_PARAM | 0x07791B | two_byte_shift_en is valid only in striding rq | |
| BAD_PARAM | 0x528685 | log_wqe_num_of_strides is valid only in striding rq | |
| BAD_PARAM | 0x4443F1 | log_wqe_stride_size is valid only in striding rq | |
| BAD_PARAM | 0x2ECC0E | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for cyclic striding rq | |
| BAD_PARAM | 0x183317 | create_rq: log wq stride for striding rq must be at least 5 | |
| BAD_PARAM | 0x1CF9D6 | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for linked list striding rq | |
| BAD_PARAM | 0x52D912 | create_rq: log wq stride for striding rq must be at least 5 | |
| BAD_PARAM | 0x4ADF4E | create_rq/rmp: invalid wq_type | |
| BAD_OP | 0x032626 | create rmp: not supported for issi = 0 | |
| BAD_OUTPUT_LEN | 0x035623 | create rmp: bad output length | |
| BAD_PARAM | 0x1049E2 | create rmp: bad opcode modifier | |
| BAD_PARAM | 0xAD604A | create_rmp: only state RDY is supported | |
| BAD_OP | 0x032624 | create srq: not supported for issi != 0 | |
| BAD_OP | 0x032625 | create xrc_srq: not supported for issi = 0 | |
| BAD_INPUT_LEN | 0x032623 | create srq: bad input length | |
| BAD_PARAM | 0x2049E2 | srq commands : bad opcode modifier | |
| BAD_PARAM | 0x111A3F | srq commands: srq buffer too big log_srq_size > LOG_MAX_SRQ_SIZE | |
| BAD_PARAM | 0x011C9D | srq commands: srq buffer too small | |
| BAD_PARAM | 0x220743 | srq commands: srq stride too small | |
| BAD_PARAM | 0x009A93 | srq commands: srq stride too big | |
| BAD_PARAM | 0x20239C | srq commands: srq state is reserved. | |
| BAD_PARAM | 0x1DD605 | srq commands: srq.lwm reserved on create | |
| BAD_PARAM | 0x49D322 | srq commands: srq.wqe_cnt reserved on create | |
| BAD_PARAM | 0x441D01 | srq commands: basic_cyclic_rcv_wqe not supported | |
| BAD_RESOURCE | 0x1B118E | query_srq/arm_srq: attempt to access reserved srqn | |
| BAD_RES_STATE | 0x785B7D | query_srq/arm_srq: bad srq index | |
| BAD_OP | 0x031624 | query srq: not supported for issi != 0 | |
| BAD_OUTPUT_LEN | 0x4B57A5 | query_srq: bad output length | |
| BAD_PARAM | 0x65FE9A | query_srq: bad opcode modifier | |
| BAD_OUTPUT_LEN | 0x4B57A6 | query_rmp: bad output length | |
| BAD_PARAM | 0x65FE96 | query_rmp: bad opcode modifier | |
| BAD_OP | 0x5937D1 | bad opcode. | |
| BAD_INPUT_LEN | 0x21D355 | create_psv: bad input length | |
| BAD_PARAM | 0x65CBA5 | illegal mcg - bits 127:120 must be 0xff | |
| BAD_PARAM | 0x3B3207 | can't attach qp with connected transport type to mcg | |
| BAD_INPUT_LEN | 0x3822D9 | generate_eqe: bad input length | |
| BAD_OUTPUT_LEN | 0x0697FB | generate_eqe: bad output length | |
| BAD_OP | 0x2BC31B | bad opcode. | |
| BAD_PARAM | 0x55DFA3 | bad op_mod | |
| BAD_OUTPUT_LEN | 0x47D8A0 | arm_rq: bad output length | |
| BAD_PARAM | 0x0D6045 | arm_rq: (opcode mod == 0) | |
| BAD_OUTPUT_LEN | 0x4ED8A0 | modify_rmp: bad output length | |
| BAD_PARAM | 0x0D604E | modify_rmp: opcode_mode is reserved | |
| BAD_PARAM | 0x0D604A | modify_rmp: only state RDY is supported | |
| BAD_PARAM | 0x0D123B | modify_rmp: only bit 0 in modify_bitmask is valid | |
| BAD_OUTPUT_LEN | 0x347AD9 | arm_dct_for_key_violation: bad output length | |
| BAD_PARAM | 0x79876F | arm_dct_for_key_violation: (opcode mod != 0) | |
| BAD_INPUT_LEN | 0x0166EB | set_mad_demux: bad input length | |
| BAD_INPUT_LEN | 0x45E8DB | query_vport_counter: bad input length | |
| BAD_OUTPUT_LEN | 0x7F4257 | query_vport_counter: bad output length | |
| BAD_PARAM | 0x0F5C3F | query_vport_counter: op_mod is reserved | |
| BAD_INPUT_LEN | 0x7F403F | rst2init_qp: bad input length | |
| BAD_PARAM | 0x42D0D3 | rst2init_qp: bad opcode modifier | |
| BAD_PARAM | 0x51C12E | rst2init_qp: opt_param_mask != 0 | |
| BAD_RES_STATE | 0x0E5ACC | rst2init_qp: invalid qp number. | |
| BAD_QP_STATE | 0x22D561 | rst2init_qp: qp is not in reset state | |
| RESOURCE_BUSY | 0x5D75A3 | activate_tracer: hw tracer is already used by code coverage | |
| BAD_PARAM | 0x15A5F8 | activate_tracer: bad_mkey, cannot be used for address translation | |
| BAD_PARAM | 0x0B6F45 | activate_tracer: bad mkey, length must be 4K aligned | |
| BAD_PARAM | 0x0B6F44 | activate_tracer: bad mkey, local write is not enabled | |
| RESOURCE_BUSY | 0x60DF34 | activate_tracer: tracer is already activated | |
| BAD_PARAM | 0x46D451 | vport commands: insufficient privileges | |
| BAD_PARAM | 0x35E4FF | vport commands: bad port_number. vport number is too high | |
| BAD_PARAM | 0x0754A4 | vport commands: bad port_number, vport number must be 0 if input_other_vport is not set. | |
| BAD_INPUT_LEN | 0x7CF9E6 | create sq: bad input length | |
| BAD_PARAM | 0x551925 | create_sq: bad opcode_modifier | |
| BAD_PARAM | 0x4E4B51 | create_sq: sq state must be RST | |
| BAD_PARAM | 0x17A194 | create_sq: dbr_address must be dword aligned | |
| BAD_PARAM | 0x5F5A07 | create_sq: wq_type must be 1 | |
| BAD_PARAM | 0x27A8E4 | create_sq: sq_size > MAX_QP_SIZE | |
| BAD_PARAM | 0x0AC270 | create_sq: bad uar number | |
| BAD_PARAM | 0x111FE2 | create_sq: wq stride must be precisely 6 | |
| BAD_PARAM | 0x162D0B | create_sq: max tis_lst_sz is 1 | |
| BAD_PARAM | 0x1B2418 | create_sq: tis_num_0 is reserved for tis_lst_sz=0 | |
| BAD_PARAM | 0x02974A | create_sq: allow_multi_pkt_send_wqe is not supported | |
| BAD_PARAM | 0x2B4746 | create_sq: sq.min_wqe_inline_mode must be >= nic_vport.min_sq_wqe_inline_mode | |
| BAD_INPUT_LEN | 0x9CF9E6 | modify sq: bad input length | |
| BAD_PARAM | 0x551995 | modify_sq: bad opcode_modifier | |
| BAD_RESOURCE | 0x60CD18 | modify_sq: resource is not valid | |
| BAD_PARAM | 0x51CFBC | modify_sq: input sq_state does not match current state | |
| BAD_PARAM | 0x51CFB0 | modify_sq: err2rdy state transition is not supported | |
| BAD_PARAM | 0x5333B0 | modify_sq: rst2err state transition is not supported | |
| BAD_PARAM | 0x671AB1 | modify_sq: modify_bitmask is reserved | |
| BAD_INPUT_LEN | 0x754762 | create_rq: bad input length | |
| BAD_PARAM | 0x57CFFB | create_rq: bad opcode_modifier | |
| BAD_PARAM | 0x724AEC | create_rq: rq state must be RDY | |
| BAD_PARAM | 0x71CE3F | create_rq: RMP is not supported | |
| BAD_PARAM | 0x3BD828 | create_rq: undefined wq_type | |
| BAD_INPUT_LEN | 0x6CF9E6 | modify rq: bad input length | |
| BAD_PARAM | 0x551965 | modify_rq: bad opcode_modifier | |
| BAD_RESOURCE | 0x671AD0 | modify_rq: resource is not valid | |
| BAD_PARAM | 0x669FBA | modify_rq: rst2err state transition is not supported | |
| BAD_PARAM | 0x51CFBA | modify_rq: err2rdy state transition is not supported | |
| BAD_PARAM | 0x7ACDB1 | modify_rq: support vsd and lwm changes only | |
| BAD_PARAM | 0x24A3B1 | modify_rq: vsd/lwm change is allowed only for rst2rdy, rdy2rdy | |
| BAD_RES_STATE | 0x46311B | modify_tis: invalid tis number | |
| BAD_INPUT_LEN | 0x492E95 | modify_tis: bad input length | |
| BAD_PARAM | 0x374B62 | modify_tis: bad opcode modifier | |
| BAD_PARAM | 0x538B5F | create/modify_rqt: rqt_max_size > MAX_RQT_SIZE | |
| BAD_PARAM | 0x538FAF | create/modify_rqt: rqt_actual_size > rqt_max_size | |
| BAD_PARAM | 0x538FAB | create/modify_rqt: rqt actual size must be a power of 2 | |
| BAD_PARAM | 0x538FCB | create/modify_rqt: rqt max size must be a power of 2 | |
| BAD_PARAM | 0x539FDB | create/modify_rqt: rqt size must be > 0 | |
| BAD_PARAM | 0x698B5F | modify_rqt: only bit 0 is valid in modify_bitmask | |
| BAD_INPUT_LEN | 0x0DE7A0 | create_tis: bad input length | |
| BAD_PARAM | 0x6A5278 | create_tis: bad opcode modifier | |
| BAD_PARAM | 0x709018 | create modify tir: bad opcode_modifier | |
| BAD_PARAM | 0x4C0EC1 | create tir: disp_type value can be 0 or 1 | |
| BAD_PARAM | 0x4B0519 | create/modify_tir: indirect_table is reserved for disp_type direct | |
| BAD_PARAM | 0x4B0518 | create/modify_tir: direct_rqn is reserved for disp_type indirect | |
| BAD_PARAM | 0x75C809 | create_tir: invalid self_lb_block | |
| BAD_PARAM | 0x177FBD | modify_tir: bitmask value is not legal | |
| BAD_PARAM | 0x177FDD | modify_tir: disp_type is reserved | |
| BAD_PARAM | 0x4C0519 | modify_tir: inline_rqn is reserved | |
| BAD_PARAM | 0x2D1EEC | create/modify_tir: bitmask value is not legal for disp_type direct | |
| BAD_PARAM | 0x177FDE | create/modify_tir: indirect_table is reserved | |
| BAD_PARAM | 0x30EC1E | create/modify_tir: lro params are reserved if lro_enable_mask not set | |
| BAD_PARAM | 0x793CE4 | create/modify_tir: lro params are reserved if lro_enable_mask not set | |
| BAD_PARAM | 0x176FDE | modify_tir: lro params are reserved if lro bitmask not set | |
| BAD_PARAM | 0x178FDE | modify_tir: lro params are reserved if lro bitmask not set | |
| BAD_PARAM | 0x179FDE | modify_tir: lro params are reserved if lro bitmask not set | |
| BAD_PARAM | 0x0479A3 | create modify tir: invalid rx_hash_fn | |
| BAD_PARAM | 0x067146 | create modify tir: disp_type is indirect, but rx_hash_fn is none | |
| BAD_PARAM | 0x727E5F | create modify tir: rx_hash_fn is none, but rx_hash_symmetric is not reserved | |
| BAD_PARAM | 0x1D2602 | create modify tir: rx_hash_fn must be NONE for disp_type direct | |
| BAD_PARAM | 0x569EE6 | create modify tir: rx_hash_fn is not toeplitz, but rx_hash_toeplitz_key is not reserved | |
| BAD_PARAM | 0x3C59ED | create modify tir: rx_hash_fn is none, but outer hash selectors aren't reserved | |
| BAD_PARAM | 0x1C914B | create modify tir: rx_hash_fn is none, but inner hash selectors aren't reserved | |
| BAD_PARAM | 0x562B00 | create modify tir: rx_hash_field_selector_inner is valid only when tunneled_offload_en is set | |
| BAD_PARAM | 0x001139 | create modify tir: inner/outer hash selectors are mutual exclusive | |
| BAD_PARAM | 0x76D4CC | create modify tir: invalid outer hash field selector | |
| BAD_PARAM | 0x21D95B | create modify tir: invalid inner hash field selector | |
| BAD_PARAM | 0x4F161A | create modify tir: rx_hash modify_bitmask isn't set, but rx_hash_symmetric is not reserved | |
| BAD_PARAM | 0x514708 | create modify tir: rx_hash modify_bitmask isn't set, but rx_hash_fn is not reserved | |
| BAD_OUTPUT_LEN | 0x51552B | query_nic_vport_context: bad output length | |
| BAD_OUTPUT_LEN | 0x3B7FBF | query_nic_vport_context: bad input length | |
| BAD_OP | 0x2F4BF1 | query_nic_vport_context: command is valid only for ethernet port | |
| BAD_PARAM | 0x2B196F | query_nic_vport_context: op_mod is reserved | |
| BAD_OUTPUT_LEN | 0x554267 | modify_nic_vport_context: bad output length | |
| BAD_OUTPUT_LEN | 0x2E83D3 | modify_nic_vport_context: bad input length | |
| BAD_OP | 0x4E4CE0 | modify_nic_vport_context: command is valid only for ethernet port | |
| BAD_PARAM | 0x3F26DC | modify_nic_vport_context: op_mod is reserved | |
| BAD_PARAM | 0x19320A | modify_nic_vport_context: only vport is allowed to modify address_list | |
| BAD_PARAM | 0x19320B | modify_nic_vport_context: only vport is allowed to modify roce | |
| BAD_PARAM | 0x19320C | modify_nic_vport_context: only vport is allowed to modify ptomisc | |
| BAD_PARAM | 0x78091C | modify_nic_vport_context: vport can't change his own permanent mac address | |
| BAD_PARAM | 0x5EE994 | modify_nic_vport_context: insufficient privileges | |
| BAD_PARAM | 0x19356A | modify_nic_vport_context: only vport group manager is allowed to modify chage events | |
| BAD_PARAM | 0x24356A | modify_nic_vport_context: only vport group manager is allowed to modify min wqe inline mode | |
| BAD_PARAM | 0x64856B | modify_nic_vport_context: vport group manager can not modify its own min_wqe_inline_mode | |
| BAD_INPUT_LEN | 0x33FFA3 | query_esw_vport_context: bad input len | |
| BAD_OUTPUT_LEN | 0x23DF67 | query_esw_vport_context: bad output len | |
| BAD_OP | 0x116BCC | query_esw_vport_context: op_mod is reserved | |
| BAD_OP | 0x4EAFE7 | query_esw_vport_context: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x2BDAA3 | modify_esw_vport_context: bad input len | |
| BAD_OUTPUT_LEN | 0x23D456 | modify_esw_vport_context: bad output len | |
| BAD_OP | 0x266AAB | modify_esw_vport_context: op_mod is reserved | |
| BAD_OP | 0x433CE0 | modify_esw_vport_context: command is valid only for ethernet port | |
| BAD_PARAM | 0x326B6C | modify_esw_vport_context: svlan_insert is set but svlan_insert_field_select is off | |
| BAD_PARAM | 0x735020 | modify_esw_vport_context: svlan_insert is off but svlan fields are not reserved | |
| BAD_PARAM | 0x2D76B3 | modify_esw_vport_context: cvlan_insert is set but cvlan_insert_field_select is off | |
| BAD_PARAM | 0x32C8AB | modify_esw_vport_context: cvlan_insert is off but cvlan fields are not reserved | |
| BAD_INPUT_LEN | 0x44BC7C | set_roce_address: bad input len | |
| BAD_OUTPUT_LEN | 0x7FDB57 | set_roce_address: bad output len | |
| BAD_OP | 0x427418 | set_roce_address: command is valid only for ethernet port | |
| BAD_OP | 0x427419 | set_roce_address: op_mod is reserved | |
| BAD_PARAM | 0x26D532 | set_roce_address: vlan id is reserved when vlan_valid=0 | |
| BAD_PARAM | 0x729BBB | set_roce_address: invalid roce_l3_type type | |
| BAD_PARAM | 0x12822D | set_roce_address: invalid roce_version | |
| BAD_PARAM | 0x79DF98 | set_roce_address: for roce_version=0, roce_l3_type is reserved | |
| BAD_INDEX | 0x063C65 | set_roce_address: roce_address_index not valid | |
| BAD_PARAM | 0x063C66 | set_roce_address: multicast source_mac is not allowed | |
| BAD_PARAM | 0x493CC9 | vport commands: bad port_number. vport number is too high | |
| BAD_PARAM | 0x63993F | query_vport_state: query uplink state - vport_number/other_vport is reserved | |
| BAD_PARAM | 0x311733 | vport commands: not privileged | |
| BAD_PARAM | 0x457F0C | vport commands:: not privileged | |
| BAD_PARAM | 0x36A82E | flow_table: esw fdb configuration is valid only for vport_group_manager | |
| BAD_PARAM | 0x4DAD27 | flow_table: unsupported table_type | |
| BAD_PARAM | 0x2AC754 | flow_table: currently Flow Table does not supports IB port | |
| BAD_PARAM | 0x7684D8 | flow_table: other_vport is valid only for ACL flow tables | |
| BAD_OP | 0x525850 | create_flow_table: op_mod is reserved | |
| BAD_PARAM | 0x5F1732 | create_flow_table: table log_size > FT_LOG_MAX_SIZE | |
| BAD_PARAM | 0x5578D3 | create_flow_table: table level > FT_MAX_LEVEL | |
| BAD_INPUT_LEN | 0x67847C | create_flow_group: bad input len | |
| BAD_OUTPUT_LEN | 0x527B57 | create_flow_group: bad output len | |
| BAD_OP | 0x0E5810 | create_flow_group: op_mod is reserved | |
| BAD_PARAM | 0x1D1B31 | create_flow_group: start_flow_index is bigger than end_flow_index | |
| BAD_PARAM | 0x4065F0 | create_flow_group: end_flow_index >= FT_MAX_SIZE | |
| BAD_INPUT_LEN | 0x2BDEBE | set_flow_table_entry: bad input len | |
| BAD_OUTPUT_LEN | 0x11FF56 | set_flow_table_entry: bad output len | |
| BAD_OP | 0x5342CD | set_flow_table_entry: op_mod is reserved | |
| BAD_PARAM | 0x5FAB40 | set_flow_table_entry: invalid flow_index | |
| BAD_PARAM | 0xFDBD26 | set_flow_table_entry: flow_tag not supported for this flow table type | |
| BAD_PARAM | 0x603D26 | set_flow_table_entry: rule already exist | |
| BAD_PARAM | 0x144B7A | set_flow_table_entry: flow table entry must has exactly one action set | |
| BAD_PARAM | 0x214DE0 | set_flow_table_entry: destination_list_size is valid iff fwd action is set | |
| BAD_PARAM | 0x3E29DE | set_flow_table_entry: destination_list_size greater than max supported | |
| BAD_OP | 0x3EB7E7 | delete_flow_table_entry: op_mod is reserved | |
| BAD_PARAM | 0x5FAB41 | delete_flow_table_entry: invalid flow_index | |
| BAD_PARAM | 0x4EFC3D | delete_flow_table_entry: rule doesn't exist | |
| BAD_INPUT_LEN | 0x1D1437 | query_flow_table_entry: bad input len | |
| BAD_OUTPUT_LEN | 0x611D98 | query_flow_table_entry: bad output len | |
| BAD_OP | 0x0AB1E9 | query_flow_table_entry: op_mod is reserved | |
| BAD_PARAM | 0x5FAB42 | query_flow_table_entry: invalid flow_index | |
| BAD_PARAM | 0x63213B | query_flow_table_entry: rule doesn't exist | |
| BAD_PARAM | 0x706441 | l2_table_entry: l2 table configuration is valid only for vport_group_manager | |
| BAD_PARAM | 0x471805 | l2_table_entry: l2 table commands are not supported for port type ib | |
| BAD_PARAM | 0x03A55E | l2_table_entry: table_index > MAX_L2_TABLE_SIZE | |
| BAD_PARAM | 0x0E701A | add_vxlan_udp_dport: only PFs are allowed to modify the vxlan dport | |
| BAD_PARAM | 0x03E78D | add_vxlan_udp_dport: vxlan commands are not supported for port type ib | |
| BAD_INPUT_LEN | 0x6C8FBB | add_vxlan_udp_dport: bad input len | |
| BAD_OUTPUT_LEN | 0x6D7E67 | add_vxlan_udp_dport: bad output len | |
| BAD_OP | 0x62F4C9 | add_vxlan_udp_dport: op_mod is reserved | |
| BAD_PARAM | 0x79D920 | delete_vxlan_udp_dport: only PFs are allowed to modify the vxlan dport | |
| BAD_PARAM | 0x091DB1 | delete_vxlan_udp_dport: vxlan commands are not supported for port type ib | |
| BAD_INPUT_LEN | 0x5BBF13 | delete_vxlan_udp_dport: bad input len | |
| BAD_OUTPUT_LEN | 0x66B6FC | delete_vxlan_udp_dport: bad output len | |
| BAD_OP | 0x0641AF | delete_vxlan_udp_dport: op_mod is reserved | |
| BAD_PARAM | 0x249AD6 | check_modify_cong_params_ecn_rp: dec_fac should be in 0-100 range | |
| BAD_PARAM | 0x7076FC | check_modify_cong_params_qcn_rp: dec_fac should be in 0-100 range | |
| BAD_INPUT_LEN | 0x5BEEFD | check_modify_cong_params:bad input len | |
| BAD_OUTPUT_LEN | 0x70CE1A | check_modify_cong_params:bad output len | |
| BAD_PARAM | 0x58C4C9 | check_modify_cong_params:cong_protocol unsupprted protocol | |
| BAD_INPUT_LEN | 0x5B6843 | check_query_cong_params:bad input len | |
| BAD_OUTPUT_LEN | 0x0D468B | check_query_cong_params:bad output len | |
| BAD_PARAM | 0x325A82 | check_query_cong_params:cong_protocol unsupprted protocol | |
| BAD_INPUT_LEN | 0x5A48F1 | check_modify_cong_status:bad input len | |
| BAD_OUTPUT_LEN | 0x41F0EA | check_modify_cong_status:bad output len | |
| BAD_PARAM | 0x38252F | check_modify_cong_status:cong_protocol unsupprted protocol | |
| BAD_PARAM | 0x27A3FB | check_modify_cong_status:tag enable is only valid for QCN | |
| BAD_INPUT_LEN | 0x2498E2 | check_query_cong_status:bad input len | |
| BAD_OUTPUT_LEN | 0x245260 | check_query_cong_status:bad output len | |
| BAD_PARAM | 0x507EE9 | check_query_cong_status:cong_protocol unsupprted protocol | |
| BAD_SYS_STATE | 0x2207A9 | enable_hca: HCA already enabled | |
| BAD_SYS_STATE | 0x075C88 | enable_hca: function_id already enabled | |
| BAD_SYS_STATE | 0x034D7C | disable_hca: error, teardown_hca required before disable_hca | |
| BAD_PARAM | 0x239208 | bad PAS - reserved not zero | |
| BAD_OP | 0x3590F5 | bad opcode, or opcode not supported in this device | |
| BAD_RES_STATE | 0x30F433 | destroy_eq: eqn in use or doesn't exist | |
| EXCEED_LIM | 0x7957C3 | create_eq: fail to allocate eqn | |
| EXCEED_LIM | 0x54B156 | create_eq: fail to allocate/map mtt index | |
| BAD_RES_STATE | 0x1870AD | destroy cq: cqn in use or doesn't exist | |
| EXCEED_LIM | 0x0E0E82 | create_cq: fail to allocate cqn | |
| BAD_RESOURCE | 0x0C43F4 | create_cq: eqn doesn't exist | |
| EXCEED_LIM | 0x62BBC6 | create_cq: fail to allocate mtt index | |
| BAD_OP | 0x7A5594 | bad opcode | |
| EXCEED_LIM | 0x777543 | resize cq: failed to allocate MTT number | |
| EXCEED_LIM | 0x0366A2 | modify_cq: CQ in already in error, can not resize CQ | |
| BAD_SYS_STATE | 0x711B8C | resize_cq: failed to read CQ consumer index | |
| BAD_SIZE | 0x1900B2 | resize_cq: current number of outstanding CQEs greater than new CQ size, or no space for magic CQE in old CQ | |
| BAD_RESOURCE | 0x67239E | create_cq: eqn doesn't exist | |
| BAD_RESOURCE | 0x7AEF6C | config int moderation - failed to access msix | |
| EXCEED_LIM | 0x587239 | alloc_q_counter: failed to allocate q_counter resource number | |
| BAD_RES_STATE | 0x1235F1 | dealloc_q_counter: q_counter doesn't exist | |
| BAD_OUTPUT_LEN | 0x723EAD | query_q_counter: bad output length | |
| EXCEED_LIM | 0x587439 | alloc_pd: failed to allocate pd resource number | |
| BAD_RESOURCE | 0x3AB806 | dealloc_pd: bad op_mod | |
| BAD_RESOURCE | 0x593117 | dealloc_pd: attempt to access reserved pd | |
| BAD_RES_STATE | 0x31B635 | dealloc_pd: pd number in use or doesn't exist | |
| EXCEED_LIM | 0x587939 | alloc_xrcd: failed to allocate xrcd resource number | |
| BAD_RESOURCE | 0x59D214 | dealloc_xrcd: bad op_mod | |
| BAD_RES_STATE | 0x391F01 | dealloc_xrc_domain: xrcd number in use or doesn't exist | |
| EXCEED_LIM | 0x5A7939 | alloc_uar: failed to allocate uar resource number | |
| BAD_RESOURCE | 0x6273DA | dealloc_xrcd: bad op_mod | |
| BAD_RESOURCE | 0x1AC5B8 | dealloc_uar: attempt to access reserved uar index | |
| BAD_RES_STATE | 0x4B4EDB | dealloc_uar: uar number in use or doesn't exist | |
| BAD_RESOURCE | 0x775607 | destroy_mkey: attempt to access reserved mkey_ix | |
| BAD_PARAM | 0x76093F | destroy_mkey: bad op_mod | |
| BAD_RES_STATE | 0x77502E | destroy_mkey: mkey index in use or doesn't exist | |
| EXCEED_LIM | 0x3B1885 | create_mkey: fail to allocate mkey index | |
| EXCEED_LIM | 0x59C8A4 | create mkey: fail to allocate mtt/klm index | |
| EXCEED_LIM | 0x6D50E5 | create mkey: fail to allocate bsf index | |
| EXCEED_LIM | 0x22F901 | create_psv: fail to allocate psv index | |
| BAD_RES_STATE | 0x4A3FD3 | generate_eqe: eq buffer is full. | |
| BAD_PARAM | 0x4F8BB9 | destroy_srq: bad opcode modifier | |
| BAD_RESOURCE | 0x70D476 | destroy_srq: attempt to access reserved srqn | |
| BAD_RES_STATE | 0x7F252E | destroy srq: srqn in use or doesn't exist | |
| BAD_PARAM | 0x4F8B89 | destroy_rmp: bad opcode modifier | |
| BAD_RESOURCE | 0x80D476 | destroy_rmp: attempt to access reserved srqn | |
| BAD_RES_STATE | 0x7F252F | destroy rmp: rmp in use or doesn't exist | |
| BAD_RESOURCE | 0x5E9E82 | create_srq: cqn doesn't exist | |
| BAD_INPUT_LEN | 0x3291EE | create srq: bad input length | |
| EXCEED_LIM | 0x3F947D | create_srq: fail to allocate/map mtt index | |
| EXCEED_LIM | 0x4291E8 | create_rmp: fail to allocate rmp number | |
| BAD_PARAM | 0x892E1C | create_srq: rmp mailbox was illegally modified during proccess | |
| EXCEED_LIM | 0x3291E8 | create_srq: fail to allocate srq number | |
| BAD_PARAM | 0x792E1C | create_srq: input mailbox was illegally modified during proccess | |
| BAD_PARAM | 0x1038B8 | create_srq: input mailbox was illegally modified during proccess | |
| BAD_PARAM | 0x3A3846 | manage/query_pages, enable/disable_hca: function_id exceedes number of VFs | |
| BAD_PARAM | 0x6BA1F4 | manage/query_pages, enable/disable_hca: function_id != 0, VF cannot manage pages for other VFs. | |
| BAD_OUTPUT_LEN | 0x24D543 | query_pages: bad output length | |
| BAD_PARAM | 0x27D71D | manage pages: (add) pages are not required | |
| BAD_INPUT_LEN | 0x14AD24 | manage pages: bad input length | |
| BAD_PARAM | 0x659C0E | manage pages: more pages than required | |
| BAD_OUTPUT_LEN | 0x285C19 | manage pages: (return) bad output length | |
| BAD_SYS_STATE | 0x4E2106 | manage pages: failed to read io or write host mem | |
| BAD_SYS_STATE | 0x0E8912 | manage pages: failed read from host mem | |
| BAD_SYS_STATE | 0x7731B2 | manage pages: failed write to mailbox | |
| BAD_INPUT_LEN | 0x0AA602 | mad_ifc: bad input length | |
| BAD_OUTPUT_LEN | 0x021907 | mad_ifc: bad output length | |
| BAD_PARAM | 0x71D624 | mad_ifc: opcode modifier > 3 | |
| BAD_PARAM | 0x220275 | mad_ifc: is not supported. | |
| BAD_PARAM | 0x7424DA | mad_ifc: invalid port number | |
| BAD_PKT | 0x62FA16 | mad_ifc: bad packet without detailed syndrome. | |
| BAD_PKT | 0x5BE4CF | mad_ifc: bad packet - long process | |
| BAD_PARAM | 0x5282CF | set_hca_cap: bad params (reserved not zero) | |
| BAD_PARAM | 0x5ADD95 | Query hca_cap: bad op_mod | |
| BAD_OUTPUT_LEN | 0x38FF78 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF77 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF76 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF75 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF73 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF72 | query_hca_cap: bad output length | |
| BAD_PARAM | 0x068B46 | query_hca_cap: e-switch capabilities allowed only for vport_group_manager | |
| BAD_OUTPUT_LEN | 0x38FF79 | query_hca_cap: bad output length | |
| BAD_PARAM | 0x2895B0 | query_hca_cap: e-switch capabilities allowed only for vport_group_manager | |
| BAD_OUTPUT_LEN | 0x38FF74 | query_hca_cap: bad output length | |
| BAD_PARAM | 0x5ADD96 | Query hca_cap: bad op_mod | |
| BAD_OUTPUT_LEN | 0x726C77 | Query adapter: bad output length | |
| BAD_PARAM | 0x471AEF | Query adapter: bad op_mod | |
| BAD_PARAM | 0x1E5585 | reg_access_ports_perf_counters: bad params | |
| BAD_PARAM | 0x450452 | access_register port capabilities: write option is not supported | |
| BAD_PARAM | 0x01D849 | access_register port capabilities: write option is not supported | |
| BAD_PARAM | 0x136488 | set_wol_rol: opcode mod must be zero | |
| BAD_OP | 0x745959 | set_wol_rol: command is allowed only for function per port mode | |
| BAD_OP | 0x1A4F91 | set_wol_rol: command is allowed for physical function only | |
| BAD_OP | 0x157659 | set_wol_rol: eth only command | |
| BAD_OP | 0x376559 | set_wol_rol: device don't support wol on the selected function | |
| BAD_OP | 0x261053 | query_wol_rol: command is allowed only in function per port mode | |
| BAD_OP | 0x257659 | query_wol_rol: eth only command | |
| BAD_OP | 0x497181 | query_wol_rol: command is allowed for physical function only | |
| BAD_PARAM | 0x033EEF | access_register pvlc: write operation not supported | |
| BAD_PARAM | 0x792FB4 | reg_access_pvlc: invalid local port. | |
| BAD_PARAM | 0x15C356 | access_register port capabilities: write option is not supported | |
| BAD_PARAM | 0x2C6A90 | flow control, PFCC wrong port number | |
| BAD_PARAM | 0x16DBB4 | flow control, PFCC port number is not valid | |
| BAD_PARAM | 0x1476BD | Flow control, PFCC, pfc mask not supported (pfctx or pfcrx) when pprx_v or pptx_v are set. | |
| BAD_RES_STATE | 0x361418 | query_event_map: cannot write context to output. | |
| BAD_SYS_STATE | 0x7ADFBF | get_dropped_packet_log: packet not captured yet. | |
| BAD_PARAM | 0x5A6AAEF| modify_rmp: Limit water mark is higher then rq/srq size. | |
| BAD_PARAM | 0x5A6FEF | arm_rq: Limit water mark is higher then rq/srq size. | |
| BAD_RES_STATE | 0x5DE017 | arm_dct_for_key_violation: context is not a DCT | |
| BAD_RES_STATE | 0x44E23B | arm_dct_for_key_violation: event type not mapped | |
| BAD_RESOURCE | 0x28762F | set_burst burst size cannot be changed by VF | |
| BAD_PARAM | 0x064868 | set_burst_size: bad burst_size (0) | |
| BAD_PARAM | 0x3A23EE | set_burst_size: bad burst_size | |
| BAD_PARAM | 0x3621BF | query_hca_vport_context: invalid local_port | |
| BAD_PARAM | 0x78312E | query_hca_vport_context: opcode mod must be zero | |
| BAD_OP | 0x482341 | query_hca_vport_context: ib only command | |
| BAD_OUTPUT_LEN | 0x64FF1A | modify_hca_vport_context bad: output length | |
| BAD_OUTPUT_LEN | 0x4E3D11 | modify_hca_vport_context bad: input length | |
| BAD_PARAM | 0x244467 | modify_hca_vport_context: invalid local_port | |
| BAD_PARAM | 0x145288 | modify_hca_vport_context: opcode mod must be zero | |
| BAD_OP | 0x65D9A7 | modify_hca_vport_context: ib only command | |
| BAD_PARAM | 0x58E6C1 | modify_hca_vport_context: field_select contains read only field. | |
| BAD_SYS_STATE | 0x4CBF2E | modify_hca_vport_context: modify other vports allowed just after pf finish init_hca. | |
| BAD_PARAM | 0x0A0003 | modify_hca_vport_context: port guid cannot be zero. | |
| BAD_PARAM | 0x0A0004 | modify_hca_vport_context: Bad port guid (1) see SPEC: 4.1.1 GID USAGE AND PROPERTIES | |
| BAD_PARAM | 0x437CB5 | modify_hca_vport_context: node guid cannot be zero. | |
| BAD_PARAM | 0x154537 | modify_hca_vport_context: bad vport_state_policy | |
| BAD_PARAM | 0x4EE45E | modify_hca_vport_context: bad cap_mask1_field_select trying to modify RO field. | |
| BAD_PARAM | 0x1717E4 | modify_hca_vport_context: bad cap_mask2_field_select trying to modify RO field. | |
| BAD_PARAM | 0x0E40B0 | query_hca_vport_gid: invalid local_port | |
| BAD_PARAM | 0x4DF8F2 | query_hca_vport_gid: opcode mod must be zero | |
| BAD_OP | 0x158999 | query_hca_vport_gid: ib only command | |
| BAD_OUTPUT_LEN | 0x228592 | query_hca_vport_gid: bad output length gid_index = 0xffff | |
| BAD_PARAM | 0x0FA1F5 | query_hca_vport_gid: cannot read gid_index != 0 before function performed init_hca | |
| BAD_PARAM | 0x3DC148 | query_hca_vport_gid: bad gid_index. Index larger than hca param guid cap | |
| BAD_OUTPUT_LEN | 0x20DE7B | query_hca_vport_gid: bad output length | |
| BAD_PARAM | 0x54E60A | query_hca_vport_pkey: invalid local_port | |
| BAD_PARAM | 0x40FF30 | query_hca_vport_pkey: opcode mod must be zero | |
| BAD_PARAM | 0x0F71B2 | query_hca_vport_pkey: bad pkey_index larger than hca param guid cap | |
| BAD_OUTPUT_LEN | 0x6705A2 | query_hca_vport_pkey: bad output length | |
| BAD_SYS_STATE | 0x368B01 | query_vport_counter: vport is not enabled (INIT_HCA is required) | |
| BAD_PARAM | 0x0C9387 | query_hca_vport_pkey: invalid local_port | |
| NO_RESOURCES | 0x2AAC7C | there will be no more pages | |
| EXCEED_LIM | 0x23A840 | create_tir: fail to allocate tir number | |
| EXCEED_LIM | 0x291839 | create_tir: fail to allocate tir steering entry | |
| BAD_RESOURCE | 0x2EB6A4 | create/modify_tir: rqt doesn't exist | |
| BAD_RESOURCE | 0x2EB6A5 | create/modify_tir: rq doesn't exist | |
| BAD_RESOURCE | 0x25394B | create_tir: transport_domain doesn't exist | |
| EXCEED_LIM | 0x0E350F | create_tir: fail to allocate tir lb_domain hash buckets | |
| EXCEED_LIM | 0x3C51E8 | create_tir: fail to allocate tir lb_domain steering entry | |
| EXCEED_LIM | 0x13C6BA | create_tir: fail to allocate tir lb_domain steering entries according to transport_domain | |
| BAD_PARAM | 0x77C800 | modify_tir: invalid tir number | |
| BAD_PARAM | 0x1CB6A4 | modify_tir: rqt doesn't exist | |
| BAD_RES_STATE | 0x29E5B3 | destroy_tir: tirn in use or doesn't exist | |
| EXCEED_LIM | 0x69517D | create_tis: fail to allocate tis number | |
| BAD_RESOURCE | 0x3A7839 | create_tis: transport_domain doesn't exist | |
| BAD_PARAM | 0x374C62 | modify_tis: modify_tis is not supported yet | |
| BAD_RES_STATE | 0x6CB988 | destroy_tis: tisn in use or doesn't exist | |
| BAD_PARAM | 0x2F99BB | query_nic_vport_state: bad allowed_list_type | |
| BAD_PARAM | 0x4B24FC | modify_nic_vport_state: RoCE can be disabled only after all RoCE QPs are destroyed | |
| BAD_PARAM | 0x40EA03 | modify_nic_vport_context: min_wqe_inline_mode can be modified only before vport startup | |
| BAD_PARAM | 0x36098E | modify_nic_vport_context: inline mode for any vport must be >= inline mode of e-sw vport group manager | |
| BAD_PARAM | 0x6A2CAA | modify_nic_vport_state: bad allowed_list_type | |
| BAD_PARAM | 0x019C02 | modify_nic_vport_state: bad allowed_list_size | |
| BAD_OP | 0x427417 | query_roce_address: command is valid only for ethernet port | |
| BAD_INDEX | 0x441CA6 | query_roce_address: roce_address_index not valid | |
| EXCEED_LIM | 0x4BF0E8 | create_flow_table: failed to allocate flow_table resource number | |
| EXCEED_LIM | 0x7B8877 | create_flow_table: failed to allocate RX HW flow_table context | |
| EXCEED_LIM | 0x7B8878 | create_flow_table: failed to allocate SX HW flow_table context | |
| BAD_RES_STATE | 0x21F03E | destroy_flow_group: flow_group in use or doesn't exist | |
| EXCEED_LIM | 0x4E9008 | create_flow_group: failed to allocate flow_group resource number | |
| EXCEED_LIM | 0x3243F3 | create_flow_group: failed to allocate flow_group rx hw resource | |
| EXCEED_LIM | 0x3243F4 | create_flow_group: failed to allocate flow_group sx hw resource | |
| EXCEED_LIM | 0x629511 | create_flow_group: failed to allocate flow_group fw resource | |
| BAD_RES_STATE | 0x21F03B | destroy_flow_group: flow_group doesn't exist | |
| BAD_PARAM | 0x342AAE | delete_l2_table_entry: l2 table entry does not exist | |
| BAD_PARAM | 0x244C6D | set_l2_table_entry: l2 table entry already exist | |
| EXCEED_LIM | 0x552D36 | set_l2_table_entry: failed to allocate l2_table_entry resource number | |
| EXCEED_LIM | 0x10B986 | set_l2_table_entry: failed to allocate RX HW l2_table context | |
| EXCEED_LIM | 0x17AACB | set_l2_table_entry: failed to allocate SX HW l2_table context | |
| BAD_PARAM | 0x669002 | query_l2_table_entry: l2 table entry does not exist | |
| BAD_PARAM | 0x2031B1 | modify_vport_state: NIC_VPORT - bad vport state. | |
| BAD_PARAM | 0x2936C3 | modify_vport_state: NIC_VPORT - bad vport_number | |
| BAD_PARAM | 0x75CB3D | modify_vport_state: ESW_VPORT - bad vport state. | |
| BAD_PARAM | 0x2936C2 | modify_vport_state: UP_LINK - bad vport_number | |
| BAD_PARAM | 0x16CE03 | modify_vport_state: UP_LINK - bad vport state | |
| BAD_PARAM | 0x83B703 | modify_vport_state: bad op_mod | |
| BAD_OP | 0x379DB1 | query_vport_state: command is valid only for ethernet port | |
| BAD_PARAM | 0x1B70BB | query_vport_state: bad op mod | |
| BAD_PARAM | 0x519657 | create/modify_rqt: rqn doesn't exist or rqs have not uniform type | |
| EXCEED_LIM | 0x5DAF94 | create_rqt: fail to allocate fw_rqt_data number | |
| EXCEED_LIM | 0x1C4BBA | create_rqt: fail to allocate fw rqt data number | |
| EXCEED_LIM | 0x25E793 | create_rqt: fail to allocate rqt HW DATA ctx number | |
| BAD_RESOURCE | 0x638B5F | create_rqt: rqtn is not valid | |
| EXCEED_LIM | 0x1C4BBB | create_rqt: fail to allocate fw rqt data number | |
| BAD_RES_STATE | 0x0BC68E | destroy_rqt: rqt in use or doesn't exist | |
| BAD_RES_STATE | 0x2E49BD | query_rqt: rqt in use or doesn't exist | |
| EXCEED_LIM | 0x5D5F94 | create_rq: failed to allocate resource number | |
| EXCEED_LIM | 0x5A7935 | create_rq: failed to allocate qp resource number | |
| BAD_PARAM | 0x2BF8B6 | create_rq: input_mailbox was illegally modified during process | |
| BAD_RESOURCE | 0x2BF8A6 | create_rq: cqn doesn't exist | |
| BAD_INPUT_LEN | 0x2F50CB | create_rq: not enough pas supplied to support buffer size | |
| EXCEED_LIM | 0x76E357 | create_rq: failed to allocate mtt | |
| BAD_PARAM | 0x5C129A | modify_rq: Limit water mark is higher then rq/srq size. | |
| BAD_PARAM | 0x4A5E49 | modify_rq: Limit water mark is higher then rq/srq size. | |
| EXCEED_LIM | 0x57CF9D | create_sq: failed to allocate resource_number number | |
| BAD_RESOURCE | 0x4FDE71 | create_sq: s_cqn doesn't exist | |
| BAD_RESOURCE | 0x65B501 | create_sq: maximum number of supported qps exceeded | |
| BAD_RESOURCE | 0x2AE300 | create_sq command: tis number doesn't exist or exceed limit | |
| BAD_INPUT_LEN | 0x2F40CA | create_sq: not enough pas supplied to support buffer size | |
| EXCEED_LIM | 0x6CC43E | create_sq: failed to allocate mtt | |
| BAD_RES_STATE | 0x52B76F | destroy_sq: sqn is not valid or in use | |
| BAD_RES_STATE | 0x50B76F | destroy_rq: rqn is not valid or in use | |
| EXCEED_LIM | 0x2B1A55 | add_vxlan_udp_dport: no free vxlan_udp_port field | |
| BAD_PARAM | 0x74D092 | delete_vxlan_udp_dport: vxlan_udp_port doesn't exist | |
| BAD_OP | 0x08552F | alloc_transport_domain: bad op_mod | |
| BAD_PARAM | 0x6CEF2E | alloc_transport_domain: transport_domain commands are not supported for port type ib | |
| EXCEED_LIM | 0x095C93 | alloc_transport_domain: failed to allocate transport_domain resource number | |
| BAD_OP | 0x76358C | dealloc_transport_domain: bad op_mod | |
| BAD_RES_STATE | 0x50E692 | dealloc_transport_domain: transport_domain number in use or doesn't exist | |
| INTERNAL_ERR | 0x1CD2D5 | modify_cong_status: cannot read context from input. | |
| INTERNAL_ERR | 0x56BD42 | query_cong_params:cannot write context to output. | |
| INTERNAL_ERR | 0x55B1FD | query_cong_params:cannot write context to output. | |
| INTERNAL_ERR | 0x3C506F | query_cong_counter:cannot write context to output. | |
| BAD_PARAM | 0x68C713 | destroy_qp/dct: bad opcode modifier | |
| EXCEED_LIM | 0x19C6D6 | create_qp: failed to allocate resource_number number | |
| BAD_RESOURCE | 0x2BF8A5 | create_qp: r_cqn doesn't exist | |
| BAD_RESOURCE | 0x4FDF71 | create_qp: s_cqn doesn't exist | |
| BAD_RESOURCE | 0x4A5F02 | qp command: srq number doesn't exist | |
| BAD_RESOURCE | 0x65B500 | qp command: maximum number of supported qps exceeded | |
| BAD_INPUT_LEN | 0x2F50CA | create qp: not enough pas supplied to support buffer size | |
| EXCEED_LIM | 0x0BB3C2 | create_qp: failed to allocate mtt | |
| EXCEED_LIM | 0x42A324 | create_dct: fail to allocate dct number | |
| BAD_RESOURCE | 0x4CAF16 | create_dct: cq number doesn't exist | |
| BAD_RESOURCE | 0x3B2998 | create_dct: srq number doesn't exist | |
| BAD_PARAM | 0x41E870 | create_dct: dct.pd doesn't match srq.pd | |
| BAD_PARAM | 0x2B6D28 | create_dct: dct.rlky doesn't match srq.rlky | |
| BAD_INPUT_LEN | 0x25AC2E | init2init_qp: bad input length | |
| BAD_PARAM | 0x4BCF21 | init2init_qp: bad opcode modifier | |
| BAD_PARAM | 0x795921 | init2init_qp: opt_param_mask != 0 | |
| BAD_RES_STATE | 0x4287C3 | init2init_qp: invalid qp number. | |
| BAD_QP_STATE | 0x0C7C8B | init2init_qp: qp is not in init state | |
| BAD_INPUT_LEN | 0x7E7621 | init2rtr_qp: bad input length | |
| BAD_PARAM | 0x0A88A8 | init2rtr_qp: bad opcode modifier | |
| BAD_PARAM | 0x7016B9 | init2rtr_qp: bad opt_param_mask | |
| BAD_RES_STATE | 0x5F34F6 | init2rtr_qp: invalid qp number. | |
| BAD_QP_STATE | 0x5D668C | init2rtr_qp: qp is not in init state | |
| BAD_RESOURCE | 0x31A762 | special_qp: cannot attach special QP, already attached | |
| BAD_INPUT_LEN | 0x619154 | rtr2rts_qp: bad input length | |
| BAD_PARAM | 0x6CBD32 | rtr2rts_qp: bad opcode modifier | |
| BAD_PARAM | 0x07EC2C | rtr2rts_qp: bad opt_param_mask | |
| BAD_RES_STATE | 0x4796B7 | rtr2rts_qp: invalid qp number. | |
| BAD_QP_STATE | 0x429D76 | rtr2rts_qp: qp is not in rtr state | |
| BAD_INPUT_LEN | 0x330661 | rts2rts_qp: bad input length | |
| BAD_PARAM | 0x380F88 | rts2rts_qp: bad opcode modifier | |
| BAD_PARAM | 0x498C8B | rts2rts_qp: bad opt_param_mask | |
| BAD_PARAM | 0x1B5A69 | rts2rts_qp: change srqn is not supported in ISSI > 0. | |
| BAD_PARAM | 0x1BCDE4 | rts2rts_qp: attempting to change eth_prio in ib port | |
| BAD_RES_STATE | 0x56C36B | rts2rts_qp: invalid qp number. | |
| BAD_QP_STATE | 0x0FC39F | rts2rts: qp is not in RTS state. | |
| BAD_RESOURCE | 0x2BF8A4 | rts2rts: r_cqn doesn't exist | |
| BAD_RESOURCE | 0x7C839F | rts2rts_qp: srq number doesn't exist | |
| BAD_PARAM | 0x3F7B1C | 2error_qp/2reset/drain_dct: bad opcode modifier | |
| BAD_RES_STATE | 0x7EA02D | 2error_qp/2reset/drain_dct: invalid qp/dct number. | |
| BAD_INPUT_LEN | 0x42ED7C | sqerr2rts_qp/sqd2rts_qp: bad input length | |
| BAD_PARAM | 0x1E674D | sqerr2rts_qp/sqd2rts_qp: bad opcode modifier | |
| BAD_PARAM | 0x566AD3 | sqerr2rts_qp: bad opt_param_mask | |
| BAD_PARAM | 0x0E5F93 | sqd2rts_qp: bad opt_param_mask | |
| BAD_RES_STATE | 0x29653C | sqerr2rts_qp/sqd2rts_qp: invalid qp number. | |
| BAD_QP_STATE | 0x0E3608 | sqerr2rts_qp: qp is not in sqerr state | |
| BAD_QP_STATE | 0x3DD302 | sqd2rts_qp: qp is not in sqd state | |
| BAD_PARAM | 0x31ED04 | create_flow_table: level0 ft for this table_type is already exist | |
| NO_RESOURCES | 0x401239 | eth global steering table alloc fail 1 | |
| NO_RESOURCES | 0x71C1EB | eth global steering table alloc fail 2 | |
| NO_RESOURCES | 0x42EBCA | eth global steering table alloc fail 3 | |
| NO_RESOURCES | 0x290D05 | eth global steering table alloc fail 4 | |
| NO_RESOURCES | 0x79C639 | eth global steering table alloc fail 5 | |
| NO_RESOURCES | 0x21435E | eth global steering table alloc fail 6 | |
| NO_RESOURCES | 0x3541E6 | eth global steering table alloc fail 7 | |
| NO_RESOURCES | 0x0AFFAE | eth global steering table alloc fail 8 | |
| NO_RESOURCES | 0x2FE7D9 | eth global steering table alloc fail 9 | |
| NO_RESOURCES | 0x2039BE | eth global steering table alloc fail 10 | |
| NO_RESOURCES | 0x53B84F | eth global steering table alloc fail 11 | |
| NO_RESOURCES | 0x23A0E6 | eth global steering table alloc fail 12 | |
| NO_RESOURCES | 0x79E69E | eth global steering table alloc fail 13 | |
| NO_RESOURCES | 0x6584C2 | eth global steering table alloc fail 14 | |
| NO_RESOURCES | 0x4CF024 | eth gvmi steering table alloc fail 1 | |
| NO_RESOURCES | 0x5CF024 | eth gvmi steering table alloc fail 2 | |
| NO_RESOURCES | 0x6CF024 | eth gvmi steering table alloc fail 3 | |
| NO_RESOURCES | 0x7368A4 | eth gvmi steering table alloc fail 4 | |
| NO_RESOURCES | 0x0AC92B | eth gvmi steering table alloc fail 5 | |
| NO_RESOURCES | 0x58900D | eth gvmi steering table alloc fail 6 | |
| NO_RESOURCES | 0x0B0CFD | eth gvmi steering table alloc fail 7 | |
| NO_RESOURCES | 0x33EA94 | eth gvmi steering table alloc fail 8 | |
| BAD_PARAM | 0x1C2B78 | ft_test_and_update: invalid table_id | |
| BAD_PARAM | 0x66CBBB | ft_test_and_update: table_id doesn't match table_type | |
| BAD_PARAM | 0x66CDDD | ft_test_and_update: table_id doesn't exist for this vport_num | |
| BAD_PARAM | 0x66D6C3 | destroy_flow_table: flow table still has attached groups | |
| BAD_PARAM | 0x389E56 | destroy_flow_table: flow table still pointed by some flows | |
| EXCEED_LIM | 0x0A1020 | create_flow_group: groups_member_count > table_size | |
| BAD_RESOURCE | 0x3D1541 | set_flow_table_entry: tir doesn't exist; | |
| EXCEED_LIM | 0x5D1541 | set_flow_table_entry: tir ref_count exceed limit | |
| BAD_PARAM | 0x6D1541 | set_flow_table_entry: tir already pointed by some flow table with different table type | |
| BAD_PARAM | 0x3178F5 | flow_group: flow_group doesn't exist (no such group_id for this table_id) | |
| BAD_PARAM | 0x6D0ED4 | flow_group: flow_group doesn't exist (no such group_id for this table_type) | |
| BAD_PARAM | 0x0F4A91 | set_flow_table_entry: flow_index < group start_flow_index | |
| BAD_PARAM | 0x1DC7A3 | set_flow_table_entry: flow_index > group end_flow_index | |
| BAD_PARAM | 0x3AD328 | set_flow_table_entry: rule include unmatched bits (group_match_criteria == 0, but fte_match_value == 1) | |
| BAD_PARAM | 0x66010E | create_flow_group: invalid match_criteria_enable | |
| BAD_PARAM | 0x7E1579 | create_flow_group: outer_headers valid bit isn't set, but headers are not reseved | |
| BAD_PARAM | 0x7E1580 | create_flow_group: outer_headers valid bit is set, but headers are zero | |
| BAD_PARAM | 0x0D37F4 | create_flow_group: misc_parameters valid bit isn't set, but headers are not reseved | |
| BAD_PARAM | 0x0D37F5 | create_flow_group: misc_parameters valid bit is set, but headers are zero | |
| BAD_PARAM | 0x17FAA8 | create_flow_group: inner_headers valid bit isn't set, but headers are not reseved | |
| BAD_PARAM | 0x17FAA9 | create_flow_group: inner_headers valid bit is set, but headers are not zero | |
| INTERNAL_ERR | 0x0FC8F3 | create_flow_group: unexpected invalid group in list | |
| BAD_PARAM | 0x190DBD | create_flow_group: groups overlapping | |
| BAD_PARAM | 0x7252AD | create_flow_group: groups overlapping | |
| BAD_PARAM | 0x4FF308 | create_flow_group: group exceed flow table size | |
| BAD_PARAM | 0x6AE84C | set_flow_table_entry: destination table is in illegal level | |
| BAD_PARAM | 0x6AE95D | set_flow_table_entry: dest_list_size > 1, but dest_ft_level < 64 | |
| BAD_PARAM | 0x6AEA6E | set_flow_table_entry: dest_list_size > 1, but src_ft_level >= 64 | |
| BAD_PARAM | 0x44090E | set_flow_table_entry: invalid vport number | |
| BAD_PARAM | 0x4C4A4A | set_flow_table_entry: destination list must be comprised of destinations of the same type | |
| BAD_PARAM | 0x22A5AF | set_flow_table_entry: dest_type == VPORT is valid only for table_type == ESW_FDB | |
| BAD_PARAM | 0x142AD1 | set_flow_table_entry: multiple processing paths of flow tables is supported only for table_type == NIC_RX | |
| BAD_PARAM | 0x002C63 | set_flow_table_entry: dest_type == TIR is valid only for NIC RX and sniffer flow tables | |
| BAD_PARAM | 0x06DBB6 | set_flow_table_entry: multiple TIR destinations is not allowed | |
| BAD_PARAM | 0x27DBA7 | set_flow_table_entry: invalid flow destination type | |
| BAD_RES_STATE | 0x2036ED | set_flow_table_entry: flow_group doesn't exist, or exceed limit | |
| EXCEED_LIM | 0x5369F3 | set_flow_table_entry: icm allocation failed | |
| BAD_PARAM | 0x1CC302 | create_flow_group: DIP/SIP header is set , but ethertype isn't fully set | |
| BAD_PARAM | 0x3F5A6F | create_flow_group: UDP and TCP headers are mutual exclusive | |
| BAD_PARAM | 0x23A6BF | create_flow_group: source_port match is not allwoed for this table type | |
| BAD_PARAM | 0x45A7BF | create_flow_group: source_port can not be partial matched | |
| BAD_PARAM | 0x6013FA | set_flow_table_entry: invalid IP version ethertype | |
| BAD_PARAM | 0x0CCF50 | PTYS: width 1X bit can't be cleared | |
| BAD_PARAM | 0x166B61 | PTYS: Trying to set ib_proto_admin to a speed which is not supported. | |
| BAD_PARAM | 0x103B92 | PTYS: Trying to set eth_proto_admin to a speed which is not supported. | |
| BAD_PARAM | 0x3123FD | bad PAS - reserved not zero (just for mtts. 0xfff) | |
| BAD_PARAM | 0x3123FE | bad PAS - reserved not zero (just for mtts. 0xfff) | |
| BAD_RES_STATE | 0x6DA775 | manage_pages: bad hca state (enable hca is needed). | |
| BAD_RES_STATE | 0x658908 | enable_hca: initializing | |
| BAD_RES_STATE | 0x747414 | enable_hca: HOST0 driver must be loaded first. | |
| BAD_RES_STATE | 0x083FCD | enable_hca: driver (hypervisor) refuesed to give pages. | |
| BAD_RES_STATE | 0x2F4115 | enable_hca: PF event eq hasn't been set. | |
| BAD_RES_STATE | 0x1B2028 | enable_hca: PF eq error. | |
| BAD_RES_STATE | 0x511EFC | enable_hca: HCA already enabled. | |
| BAD_RES_STATE | 0x54442A | disable_hca: PF event eq hasn't been mapped or fatal EQ problem | |
| BAD_RES_STATE | 0x54667C | disable_hca: PF event eq hasn't been mapped or fatal EQ problem | |
| BAD_RES_STATE | 0x70227F | disable hca: bad hca state. | |
| BAD_RES_STATE | 0xA38764 | query_pages: bad op_mod, boot pages is required. | |
| BAD_PARAM | 0x7EEC68 | query_pages: bad op_mod | |
| BAD_OUTPUT_LEN | 0x4D99EF | query_issi: bad output length | |
| BAD_PARAM | 0x7A7D3C | set issi: bad issi - not supported | |
| BAD_PARAM | 0x2EDABC | set issi: bad issi - not supported | |
| BAD_PARAM | 0x20BA9B | set issi: issi can be set just after enable hca. | |
| BAD_RES_STATE | 0x7F88B6 | enable_hca cannot access other functions before init hca | |
| BAD_RES_STATE | 0x7E89B1 | disable_hca cannot access other functions before init hca | |
| BAD_RES_STATE | 0x59A763 | query_pages: hca is not enabled | |
| BAD_PARAM | 0x5468FA | manage_pages: pages are not required | |
| BAD_SYS_STATE | 0x2B69B6 | bad opcode (not supported before init hca) | |
| BAD_SYS_STATE | 0x408B33 | bad opcode + hca state (HCA disabled or did not get all required pages) | |
| NO_RESOURCES | 0x632A50 | init_hca: icm context initialization error (reserved_contexts) | |
| NO_RESOURCES | 0x28E7D8 | init_hca: icm context initialization error (dc) | |
| NO_RESOURCES | 0x7B7A29 | init_hca called without enough pages to complete operation | |
| NO_RESOURCES | 0x5B3CF2 | init_hca called without enough pages to complete operation | |
| BAD_SYS_STATE | 0x133D1B | init_hca: gvmi already initialized | |
| BAD_RES_STATE | 0x448829 | teardown_hca: not all dcts are closed | |
| BAD_SYS_STATE | 0x398A88 | gvmi not active | |
| NO_RESOURCES | 0x4F8492 | global steering table alloc fail 1 | |
| NO_RESOURCES | 0x4C37AC | ib global steering table alloc fail 2 | |
| NO_RESOURCES | 0x3EFDDC | ib global steering table alloc fail 3 | |
| NO_RESOURCES | 0x6CDFC0 | ib gvmi steering table alloc fail 1 | |
| NO_RESOURCES | 0x314248 | ib gvmi steering table alloc fail 2 | |
| NO_RESOURCES | 0x498A88 | ib gvmi steering table alloc fail 3 | |
| NO_RESOURCES | 0x4BFE48 | ib gvmi steering table alloc fail 4 | |
| BAD_RES_STATE | 0x42D2BF | attach_to_mcg: qp already exists in mcg | |
| EXCEED_LIM | 0x44D596 | attach_to_mcg: mcg already has maximum qps | |
| BAD_RES_STATE | 0x53EC1C | detach_from_mcg: mcg doesn't exist | |
| BAD_RES_STATE | 0x756DB1 | detach_from_mcg: mcg doesn't exist in this gvmi | |
| BAD_RES_STATE | 0x580CF2 | detach_from_mcg: qp doesn't exist in mcg | |
| EXCEED_LIM | 0x6466E3 | attach_detach_from_mcg: steering icm entries exhausted | |
| INTERNAL_ERR | 0x28D3E6 | attach/detach_to_mcg: Failed to execute IPv6 MCG attach/detach | |
| BAD_OP | 0x2FB682 | sniffer: only port_pf_gvmi can use sniffer | |
| BAD_RES_STATE | 0x1FB682 | sniffer: attach while attached | |
| BAD_RES_STATE | 0x7E8862 | sniffer: detach while not attached | |
| BAD_RESOURCE | 0x15A3C9 | qp command: can not open RoCE QP if vport roce_en == 0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| BAD_RES_STATE | 0x25B161 | destroy_ctx - context doesn't exist or doesn't match type | |
| BAD_RES_STATE | 0x4A6FC9 | destroy_ctx - context in use | |
| BAD_RES_STATE | 0x60DA55 | destroy_dct - dct not in drained state | |
| BAD_PARAM | 0x67A6F2 | slrg doesnt support write; | |
| BAD_PARAM | 0x0F0E35 | ppamp doesnt support write; | |
| BAD_PARAM | 0x2B6B7C | mpein doesnt support write | |
| BAD_PKT | 0x4A22F | access reg MAD with specified register id not supported | |
| BAD_PKT | 0xA473A0 | MADIFC: process_smp_lid, bad privileged - silently discarded. | |
| BAD_PKT | 0x16C592 | mad_ifc: process_smp_lid mkey check failed - silently discarded | |
| INTERNAL_ERR | 0x079233 | set_get_port_info: silently discarded. | |
| BAD_PKT | 0x468496 | mad_ifc: ATTRV_SM_INFO handled by SW | |
| BAD_PKT | 0x071808 | mad_ifc: smp trap repress silently discarded after processing. | |
| BAD_PKT | 0x071809 | mad_ifc: GET_RESP and TRAP method are silently discarded. | |
| BAD_PKT | 0x7ECC11 | mad_ifc: process_cc cc_key check failed | |
| BAD_PKT | 0x4EB0AE | mad_ifc: cc trap repress silently discarded after processing. | |
| BAD_PKT | 0x3D89EB | mad_ifc: hca is not active | |
| BAD_PARAM | 0x6E0A69 | access_register PPAD: supported only with fpp enabled | |
| BAD_PARAM | 0x1CD13E | access_register PPAD: local port reserved when single_mac=0. | |
| BAD_PARAM | 0x1CC031 | access_register PPAD: invalid port | |
| BAD_PARAM | 0x04E66D | access_register PPAD: invalid port | |
| BAD_PARAM | 0x231E68 | access register PPAMP: invalid access | |
| BAD_PARAM | 0x3F06E8 | access_register SLRG: invalid port | |
| BAD_PARAM | 0x4D69AC | access register SLRG: invalid access | |
| BAD_PARAM | 0x5C2FC9 | access_register PPTT: invalid port | |
| BAD_PARAM | 0xC2B9A3 | access register PPTT: invalid access | |
| BAD_PARAM | 0x7C120F | access_register PPRT: invalid port | |
| BAD_PARAM | 0x54FB4F | access register pprt: invalid access | |
| BAD_PARAM | 0x9B3891 | access_register PPAOS: invalid port | |
| BAD_PARAM | 0x717B3F | access register PPAOS: ppaos_query_write invalid swid | |
| BAD_PARAM | 0xF53157 | access register PPAOS: invalid access | |
| BAD_PARAM | 0x5F11F5 | access_register SLTP: write to PCIe | |
| BAD_PARAM | 0x1B16B0 | access_register SLTP: invalid port | |
| BAD_PARAM | 0x6217C2 | invalid access; | |
| BAD_PARAM | 0x78E19B | access_register SLRP: write to PCIe | |
| BAD_PARAM | 0x5D3B66 | access_register SLRP: invalid port | |
| BAD_PARAM | 0x369C99 | invalid access ; | |
| BAD_PARAM | 0x07A9BF | invalid access | |
| BAD_PARAM | 0x091F41 | access_register PPLR: invalid port | |
| BAD_PARAM | 0x4497BE | invalid access | |
| BAD_PARAM | 0x7B7705 | access_register PPLM: invalid port | |
| BAD_PARAM | 0x5AA082 | pplm bad_param; | |
| BAD_PARAM | 0x7203E5 | access_register PAOS: invalid port | |
| BAD_PARAM | 0x09A9FB | access register PAOS: paos_query invalid swid | |
| BAD_PARAM | 0x7D10EF | access_register PAOS: invalid port | |
| BAD_PARAM | 0x51BF55 | access_register PAOS: invalid admin_status; | |
| BAD_PARAM | 0x6E2A11 | access register PAOS: paos_query invalid swid | |
| BAD_PARAM | 0x43A7AF | access register PAOS: invalid admin status | |
| BAD_PARAM | 0x33EDC5 | access_register PMTU: invalid port | |
| BAD_PARAM | 0x49B0F2 | access_register PTYS: invalid port | |
| BAD_PARAM | 0x7CD836 | PTYS: invalid protocol mask value | |
| BAD_PARAM | 0x2FDE74 | access_register PMTU: invalid port | |
| BAD_PARAM | 0x648AFC | PMTU: admin MTU given is greater than device's max MTU | |
| BAD_PARAM | 0x57ACCD | PMTU: admin MTU given is not a valid IB spec MTU | |
| BAD_PARAM | 0x71F74A | PMTU: admin MTU given is less than the min ETH mtu val | |
| BAD_PARAM | 0x143B37 | access_register PTYS: invalid port | |
| BAD_PARAM | 0x208984 | PTYS: invalid protocol mask value | |
| BAD_PARAM | 0x7B9543 | access_register PVLC: invalid port | |
| BAD_PARAM | 0x087016 | PVLC: port is not IB. | |
| BAD_PARAM | 0x063342 | access_register SLRG: PCIe with hix too big | |
| BAD_PARAM | 0x758D22 | access_register SLRG: PCIe bad lane | |
| BAD_PARAM | 0x3100D8 | access_register SLTP: PCIe with hix too big | |
| BAD_PARAM | 0x5A1428 | access_register SLTP: PCIe bad lane | |
| BAD_PARAM | 0x3A8B75 | access_register SLRP: PCIe with hix too big | |
| BAD_PARAM | 0x625223 | access_register SLRP: PCIe bad lane | |
| BAD_PARAM | 0x72EA4D | access_register MPEIN: PCIe with hix too big | |
| BAD_PARAM | 0x7A20B2 | access_register MPCNT: invalid group | |
| BAD_PARAM | 0x41272B | access_register MPCNT: PCIe with hix too big | |
| BAD_PARAM | 0x2D0165 | access_register MPCNT: all groups allowed with clr and set() only | |
| BAD_PARAM | 0x123FAF | access_register MPCNT: cant clear timers and state counters. | |
| BAD_PARAM | 0x7662FD | access_register MPCNT: unsupported group index on read. | |
| BAD_PARAM | 0x14D016 | access_register MPCNT: unsupported group index on clear. | |
| BAD_PARAM | 0x7ED873 | access_register MPCNT: unsupported group index on write | |
| BAD_PARAM | 0x4B4004 | reserved fields are not zero (1st DW) | |
| BAD_PARAM | 0x4E0B36 | reserved fields are not zero (2nd DW) | |
| BAD_PARAM | 0x70BE33 | bad op_mod | |
| BAD_PARAM | 0x0C6B73 | reserved fields are not zero (4th DW) | |
| BAD_INPUT_LEN | 0x672230 | bad input length | |
| BAD_OUTPUT_LEN | 0x7C331E | bad output length | |
| BAD_PARAM | 0x17B535 | reserved fields are not zero 3rd DW*/ | |
| BAD_INPUT_LEN | 0x6CE368 | get_dropped_packet_log: bad input length | |
| BAD_OUTPUT_LEN | 0x7BF634 | get_dropped_packet_log: bad output length | |
| BAD_SYS_STATE | 0x256AF0 | TODO FPP | |
| BAD_INPUT_LEN | 0x279651 | init_hca: bad input length | |
| BAD_PARAM | 0x21E00A | init_hca: bad op_mod | |
| BAD_PARAM | 0x7DD100 | reserved fields are not zero 1st DW | |
| BAD_PARAM | 0x626483 | reserved fields are not zero 2nd DW | |
| BAD_PARAM | 0x204BB3 | reserved fields are not zero 3rd DW | |
| BAD_PARAM | 0x0DBB21 | reserved fields are not zero 4th DW | |
| BAD_PARAM | 0x1B7325 | create_query_mkey: reserved fields are not zero 1st DW | |
| BAD_PARAM | 0x0CAE4B | create_query_mkey: reserved fields are not zero 2nd DW | |
| BAD_PARAM | 0x3F03F8 | create_query_mkey: reserved fields are not zero 3rd DW | |
| BAD_PARAM | 0x6EE6D8 | create_query_mkey: reserved fields are not zero 4th DW | |
| BAD_PARAM | 0x18E774 | create/modify eq/cq (resize): log_cq_size > LOG_MAX_EQCQ_SIZE | |
| BAD_PARAM | 0x6AA71A | create/modify eq/cq (resize): bad cq size. Only 64B, 128B supported | |
| BAD_PARAM | 0xAC4144 | create/modify eq/cq (resize): page offset must be 0 | |
| BAD_PARAM | 0x2B15A6 | create eq/cq: log_page_size cannot be bigger than 19 (2G) units 4K | |
| BAD_INPUT_LEN | 0x9074AA | create/modify eq/cq (resize): bad input length | |
| BAD_OUTPUT_LEN | 0x38AEDB | create/modify eq/cq (resize): bad output length | |
| BAD_PARAM | 0x7FAB49 | create eq/cq: bad opcode modifier | |
| BAD_PARAM | 0x4C4269 | create eq/cq: state is reserved. | |
| BAD_PARAM | 0x4BF94B | create eq/cq: consumer_counter != 0 | |
| BAD_PARAM | 0x6F7FB3 | create eq/cq: producer_counter != 0 | |
| BAD_PARAM | 0x397E61 | create eq/cq: bad uar number | |
| BAD_PARAM | 0x67C01E | create eq: bad msix number | |
| BAD_PARAM | 0x571493 | create eq: intr is reserved when msix isn't enabled | |
| BAD_PARAM | 0x008FEF | create_eq: unsupported event type | |
| BAD_PARAM | 0x7A4F88 | create_eq: event supported for single host per port and PFs only | |
| BAD_RESOURCE | 0x601D5F | destroy_cq: attempt to access reserved cqn | |
| BAD_PARAM | 0x11145F | destroy_cq: bad op_mod | |
| BAD_RESOURCE | 0x01A08D | destroy_eq: attempt to access reserved eqn | |
| BAD_RES_STATE | 0x1D7771 | modify_cq: bad cq number - cq doesn't exist | |
| BAD_RESOURCE | 0x55AD7A | modify_cq: attempt to access reserved cqn | |
| BAD_RES_STATE | 0x2F1396 | modify_cq: cq is in error state and cannot be modified | |
| BAD_INPUT_LEN | 0x2BA264 | modify_cq bad input length | |
| BAD_INPUT_LEN | 0x244364 | resize cq bad input length | |
| BAD_PARAM | 0x101EE5 | int_moderation: bad op_mod | |
| BAD_RESOURCE | 0x3B024B | int_moderation: attempt to access non exsistent msi-x | |
| BAD_INPUT_LEN | 0x4DF3DC | create mkey: bad input length | |
| BAD_PARAM | 0x44D3A3 | create mkey: bad opcode modifier. | |
| BAD_PARAM | 0x60D3DE | create mkey: illegal access_mode | |
| BAD_PARAM | 0x5038AD | create mkey: bsf is not supported | |
| BAD_PARAM | 0x2225F2 | create mkey: signature is not supported | |
| BAD_PARAM | 0x3B1B20 | create mkey: bsf is not supported | |
| BAD_PARAM | 0x10301E | create mkey: max bsf_octword_size supported is 256K | |
| BAD_PARAM | 0x56DD41 | create mkey: max translations_octword_size supported is 2G (max num of mtts is 4G) | |
| BAD_PARAM | 0x5F4568 | create mkey: octoword_actual_size bigger than translations_octword_size | |
| BAD_PARAM | 0x3783F6 | create mkey: PA mode with translations_octword_size > 0 | |
| BAD_PARAM | 0x03BF6F | create mkey: translations_octword_size == 0 and not PA mode. | |
| BAD_PARAM | 0x0380C1 | create mkey: NO PA mode, MR not free but no mtts was given | |
| BAD_PARAM | 0x25A977 | create mkey: MR free and umr_en disable | |
| BAD_PARAM | 0x772CF9 | create mkey: length is bigger than 2^64 | |
| BAD_PARAM | 0x66E7E8 | create mkey: wrong page size | |
| BAD_PARAM | 0x10A58D | create mkey: window size exceed translations_octword_size | |
| BAD_PARAM | 0x5B31FA | create mkey: not enough mtts in the mail box. | |
| BAD_PARAM | 0x776E2C | create mkey: wrong page size should be reserved in KLM/PA mode | |
| BAD_PARAM | 0x105B45 | create_mkey: pg_access is valid only for access_mode MTT | |
| BAD_INPUT_LEN | 0x052FD5 | query_mkey: bad input length | |
| BAD_OUTPUT_LEN | 0x24EF33 | query_mkey: bad output length | |
| BAD_PARAM | 0x247885 | query_mkey: bad opcode modifier | |
| BAD_PARAM | 0x68BFFD | query_mkey: bad opcode modifier | |
| BAD_RES_STATE | 0x15B0BA | query_mkey: bad mkey index | |
| BAD_RESOURCE | 0x6F23F2 | query_mkey: attempt to access reserved mkey | |
| BAD_PARAM | 0x2F3DC3 | query_mkey: pg_access does not match mkey pg_access | |
| BAD_RES_STATE | 0x23528A | query context/page_fault_resume: bad context number | |
| BAD_RESOURCE | 0x7D55AA | query context/page_fault_resume: attempt to access reserved context number | |
| BAD_OUTPUT_LEN | 0x3676F2 | query context/page_fault_resume: bad output length | |
| BAD_PARAM | 0x6DB4DA | query context/page_fault_resume: bad opcode modifier | |
| BAD_INPUT_LEN | 0x3249FD | page_fault_resume: bad input length | |
| BAD_PARAM | 0x10CD65 | qp_page_fault_resume: bad opcode modifier | |
| BAD_RES_STATE | 0x3D5E24 | unexpected page_fault_resume_cmd (no event sent from FW) | |
| BAD_INPUT_LEN | 0x2FC801 | create_psv: bad input length | |
| BAD_OUTPUT_LEN | 0x36918C | create_psv: bad output length | |
| BAD_PARAM | 0x4F5495 | create_psv: bad opcode modifier | |
| BAD_PARAM | 0x1F7A7F | create_psv: num of psv is 0 | |
| BAD_PARAM | 0x4CB25F | create_psv: num of psv is 3 | |
| BAD_PARAM | 0x0C1415 | create_psv: num of psv > 4 | |
| BAD_PARAM | 0x6B87EC | create_psv: reserved fields are not zero DW1 | |
| BAD_PARAM | 0x19FE3C | create_psv: reserved fields are not zero DW2 | |
| BAD_PARAM | 0x27D2DF | create_psv: reserved fields are not zero DW3 | |
| BAD_PARAM | 0x7D1C5F | create_psv: reserved fields are not zero DW4 | |
| BAD_RESOURCE | 0x179B25 | destroy_psv: attempt to access reserved psv index | |
| BAD_PARAM | 0x4AD785 | destory_psv: opcode_mod != 0 | |
| BAD_RES_STATE | 0x4FF64E | destory_psv: psv does not exist. | |
| BAD_INPUT_LEN | 0x5B7B17 | query_psv: bad input length | |
| BAD_OUTPUT_LEN | 0x14AAFD | query_psv: bad output length | |
| BAD_PARAM | 0x28A1A6 | query_psv: bad opcode modifier | |
| BAD_RESOURCE | 0x19A866 | query_psv: attempt to access reserved psv index | |
| BAD_RES_STATE | 0x3A1317 | query_psv: psv does not exist. | |
| BAD_RES_STATE | 0x12E4A1 | query_eq/gen_eqe: bad eqn | |
| BAD_RESOURCE | 0x3A12ED | query_eq/gen_eqe: attempt to access reserved eq number | |
| BAD_OUTPUT_LEN | 0x5BA99E | query_eq: bad output length | |
| BAD_PARAM | 0x6908EC | query_eq: bad opcode modifier | |
| BAD_OUTPUT_LEN | 0x47E299 | query_cq: bad output length | |
| BAD_PARAM | 0x44C59F | query_cq: bad opcode modifier | |
| BAD_RES_STATE | 0x1FB6EC | query_cq: bad qp index | |
| BAD_PARAM | 0x537E97 | dc_access option valid only for DC | |
| BAD_PARAM | 0x60D2F5 | qp commands: (Q_KEY) is supported just in UNCONNECTED mode. | |
| BAD_PARAM | 0x3670A5 | (alt_addr_path, rwe, pm_state) supported just in static connected. | |
| BAD_PARAM | 0x4DC4E4 | (ack_timeout/rnr_retry/retry_count/log_sra_max/rae) is supported just in reliable mode. | |
| BAD_PARAM | 0x25DF13 | (rre/min_rnr_nak/log_rra_max) is supported just in static reliable mode | |
| BAD_PARAM | 0x58CC13 | srq number bit is reserved if rq type != srq. | |
| BAD_PARAM | 0x3BAC66 | srq number bit is reserved in xrc mode. | |
| BAD_PARAM | 0x3836FE | xrc qp does not need receive cq | |
| BAD_PARAM | 0x6C4351 | qp without receive queue does not need receive cq. | |
| BAD_PARAM | 0x65EB34 | pm_state cannot be change in special qp | |
| BAD_PARAM | 0x76EE96 | port cannot be change in special qp | |
| BAD_PARAM | 0x5FF312 | sl cannot be change in special qp | |
| BAD_PARAM | 0x43104D | special qp does not have secondary_address_path | |
| BAD_PARAM | 0x1DB648 | address_path.f_dscp is RoCE unconnected only | |
| BAD_PARAM | 0x66375B | address_path.f_ecn is RoCE unconnected only | |
| BAD_PARAM | 0x3025D0 | address_path.f_eup is RoCE unconnected only | |
| BAD_PARAM | 0x2E015A | address_path.rmac_47_32 is RoCE connected only | |
| BAD_PARAM | 0x53A33C | address_path.rmac_31_0 is RoCE connected only | |
| BAD_PARAM | 0x7FD2B9 | address_path.udp_sport is RoCE connected only | |
| BAD_PARAM | 0x7A4E3E | address_path.ecn is RoCE only | |
| BAD_PARAM | 0x57527E | address_path.dscp is RoCE only | |
| BAD_PARAM | 0x192112 | remove after utopx fix #769534 | |
| BAD_PARAM | 0x72B104 | address_path.prio is RoCE only | |
| BAD_PARAM | 0x270173 | address_path.pkey_index is reserved for RoCE | |
| BAD_PARAM | 0x0A3AF1 | address_path.sl is reserved for RoCE | |
| BAD_PARAM | 0x2AFB5D | address_path.fl is IB native connected only field | |
| BAD_PARAM | 0x584EFC | address_path.mlid is IB native_connected only field | |
| BAD_PARAM | 0x1F3B5D | address_path.rlid is IB native connected only field | |
| BAD_PARAM | 0x1796E4 | address_path.grh is IB native connected only field | |
| BAD_PARAM | 0x08DE6B | address_path.src_addr_index is reserved for UD/DCI/no GRH | |
| BAD_PARAM | 0x32E7BB | address_path.hop_limit is reserved for UD/DCI/no GRH | |
| BAD_PARAM | 0x69216A | address_path.flow_label is reserved for UD/DCI/ no GRH | |
| BAD_PARAM | 0x764216 | address_path.tclass is reserved for UD/DCI/ no GRH | |
| BAD_PARAM | 0x7812D7 | address_path.rgid_rip is reserved for UD/DCI | |
| BAD_PARAM | 0x29E0DF | address_path.udp_sport is not in the range defined by hca_cap | |
| BAD_PARAM | 0x1FFEA3 | address_path.udp_sport is reserved for roce v1 and v1.5 | |
| BAD_PARAM | 0x1A58FB | address_path.ecn is reserved for roce v1 | |
| BAD_PARAM | 0x632491 | address_path.dscp is reserved for roce v1 | |
| BAD_PARAM | 0x3620D8 | rwe valid in static connected qp only | |
| BAD_PARAM | 0x36C5D1 | rae valid in reliable qp only | |
| BAD_PARAM | 0x7D9D73 | rae valid in RC/XRC qp only | |
| BAD_PARAM | 0x5D447D | dc msg_max > dcr_msg_max | |
| BAD_PARAM | 0x00BF9B | init2rtr: bad msg_max | |
| BAD_PARAM | 0x2B9ADC | init2rtr: non default vport must use set grh (grh bit) | |
| BAD_PARAM | 0x7158C4 | init2rtr: remote_qpn is valid in static connected node only | |
| BAD_PARAM | 0x7F56A9 | next_rcv_psn field is reserved for dci/unconnected qp | |
| BAD_PARAM | 0x390BD3 | init2rtr: min_rnr_nak field is reserved for dci/unconnected qp | |
| BAD_PARAM | 0x382E4C | illegal pm_state | |
| BAD_PARAM | 0x20FD05 | illegal pm_state transition. APM_STATE_MIGRATED can only be changed to APM_STATE_REARM | |
| BAD_PARAM | 0x1AED84 | illegal pm_state transition. While in APM_STATE_REARM, only HW can modify pm_state | |
| BAD_PARAM | 0x106230 | illegal pm_state transition. APM_STATE_ARMED can only be changed to APM_STATE_MIGRATED | |
| BAD_PARAM | 0x2C4432 | bad mtu (==0) | |
| BAD_PARAM | 0x434F5F | bad mtu enumeration mtu in [1..5] | |
| BAD_PARAM | 0x15C162 | primary_path pkey_index is larger than device cap | |
| BAD_PARAM | 0x100715 | primary_path pkey_index is reserved for RoCE | |
| BAD_PARAM | 0x2E31D2 | alternate_path pkey_index is larger than device cap | |
| BAD_PARAM | 0x476916 | QP1: q_key must be 0x80010000 | |
| BAD_PARAM | 0x069EFE | atomic_mode must comes with rae change | |
| BAD_PARAM | 0x576363 | atomic_mode is reserved without rae | |
| BAD_PARAM | 0x4CF067 | atomic_mode is greater than max supported | |
| BAD_PARAM | 0x3DB8C9 | dc extended atomic > dcr_extended_atomic | |
| BAD_PARAM | 0x177405 | qp commands : bad port number | |
| BAD_PARAM | 0x5021A1 | qp commands : alternate_path - bad port number | |
| BAD_PARAM | 0x2672B8 | dc rra_max is reserved in dci qp | |
| BAD_PARAM | 0x6DA61B | rra_max > hca_cap.log_max_ra_res | |
| BAD_PARAM | 0x285837 | dc log_sra_max > hca_cap.log_max_ra_req_dc | |
| BAD_PARAM | 0x0B673F | log_sra_max > hca_cap.log_max_ra_req | |
| BAD_RESOURCE | 0x4AF0EB | modify_qp: cannot use cq in XRC mode | |
| BAD_INPUT_LEN | 0x12661C | create qp: bad input length | |
| BAD_PARAM | 0x11EB32 | create_qp: bad opcode_modifier | |
| BAD_PARAM | 0x02DCDC | create_qp: un aligned dbr_adr | |
| BAD_PARAM | 0x28B996 | create_qp: bad service type | |
| BAD_PARAM | 0x48B5C0 | create_qp: invalid service type for RoCE | |
| BAD_PARAM | 0x311E80 | create_qp: bad rq_type. | |
| BAD_PARAM | 0x7FC507 | create_qp: bad rq_type, XRC must come with rq_type srq | |
| BAD_PARAM | 0x30CB3E | create qp: bad uar number | |
| BAD_PARAM | 0x397FA9 | create_qp: DC is not supported in hca cap configuration. | |
| BAD_PARAM | 0x410975 | create_qp: bad rq_type, DC must be srq | |
| BAD_PARAM | 0x344C32 | create_qp: bad cs_req (must be 0x22/0x0) | |
| BAD_PARAM | 0x690D51 | create_qp: fre not allowed in MLX mode | |
| BAD_PARAM | 0x694D51 | create_qp: end_padding_mode !=0 while end_pad=0 | |
| BAD_PARAM | 0x694D52 | create_qp: end_padding_mode > 1 is not supported | |
| BAD_PARAM | 0x6DCF3A | create_qp: bad log_rq_stride > 5. | |
| BAD_PARAM | 0x283F1A | create_qp: bad log_rq_size and log_rq_stride | |
| BAD_PARAM | 0x33BC5A | create_qp: log_rq_stride is reserved when rq_type != regular | |
| BAD_PARAM | 0x41B867 | create_qp: log_rq_size is reserved when rq_type != regular | |
| BAD_PARAM | 0x27D5A7 | create_qp: cd slave enable must come with rq_type regular. | |
| BAD_PARAM | 0x735349 | create qp: opt_param_mask !=0 | |
| BAD_PARAM | 0x6897E7 | qpc state != 0 | |
| BAD_PARAM | 0x6DD6F3 | sw_sq_wqebb_counter - query only | |
| BAD_PARAM | 0x55B9EB | hw_sq_wqebb_counter - query only | |
| BAD_PARAM | 0x57D8C2 | hw_rq_counter_hw_rcyclic_byte_counter - query only | |
| BAD_PARAM | 0x2FD215 | sw_rq_counter_sw_rcyclic_byte_counter -query only | |
| BAD_PARAM | 0x7698D9 | create_qp: no sq -> log_sq_size is reserved. | |
| BAD_PARAM | 0x317227 | create_qp: sq_size > MAX_QP_SIZE | |
| BAD_PARAM | 0x302CBD | create_qp: rq_size > MAX_QP_SIZE | |
| BAD_PARAM | 0x7BE362 | create_qp : bad cs_res | |
| BAD_PARAM | 0x3F86E4 | create_qp: bad cs_req | |
| BAD_PARAM | 0x4A9CAF | create_qp: bad ulp_stateless_offload_mode | |
| BAD_PARAM | 0x36B274 | create_qp: ulp_stateless_offload_mode is supported for UD QP only. | |
| BAD_PARAM | 0x3ADA02 | create_qp: bad cs_res need to be != 0x1 in UD/MLX/DC mode | |
| BAD_PARAM | 0x327D8F | create_qp: atomic_like_write_en valid in connected mode only when ts!=DCI. | |
| BAD_PARAM | 0x567DA3 | create_qp: bad cs_res: reserved in DCI case. | |
| BAD_PARAM | 0x11ED19 | create_qp: bad cs_res 0x2 not supported in UD when cgs=0x0 | |
| BAD_PARAM | 0x1FF868 | create_qp: cgs is reserved for non-UD QPs | |
| BAD_PARAM | 0x2D2509 | create_qp: block_lb_mc only supported on unconnected service types | |
| BAD_PARAM | 0x05A897 | create_qp: cs_req valid in connected mode only. | |
| BAD_PARAM | 0x7E70FD | create_qp: reserved not zero. | |
| BAD_PARAM | 0x7D7C6E | SYNC_UMR must come with rq type == no_rq. | |
| BAD_PARAM | 0x1F187A | create_qp: free_ar cannot be set in reliable qp. | |
| BAD_PARAM | 0x58BF83 | create_qp: log_page_size cannot be bigger than 19 (2G) units 4K | |
| BAD_PARAM | 0x19774A | create_qp: packet_pacing_rate_limit_index is not supported. | |
| BAD_PARAM | 0x228DD9 | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id 0x0 is reserved | |
| BAD_PARAM | 0x68E078 | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id > max counter_set_id | |
| BAD_PARAM | 0x01507C | create_dct / rst2init_qp / query/dealloc_q_counter: counter_set_id doesn't exist | |
| BAD_PARAM | 0x3E0D16 | create_dct: bad opcode_modifier | |
| BAD_PARAM | 0x0E3FAC | create_dct: DC is not supported in hca cap configuration. | |
| BAD_PARAM | 0x210B13 | create_dct: state field is reserved during create | |
| BAD_PARAM | 0x27DA36 | create_dct: bad port number | |
| BAD_PARAM | 0x2E4253 | create_dct: dc_access_key_violation_count is reserve during create | |
| BAD_PARAM | 0x6F14CE | create_dct: when rae=1, atomic_mode must be != 0 | |
| BAD_PARAM | 0x56763A | create_dct: atomic_mode is reserved without rae | |
| BAD_PARAM | 0x0AA52F | create_dct: bad cs_res | |
| BAD_PARAM | 0x319166 | create_dct: bad mtu enumeration | |
| BAD_PARAM | 0x29B3F4 | DCT pkey_index is larger than device cap | |
| BAD_OP | 0x441CC5 | bad opcode | |
| BAD_RESOURCE | 0x671120 | modify_qp/arm_rq/arm_dct/mcg command: attempt to access reserved qpn number | |
| BAD_RESOURCE | 0x21FA8C | modify_qp/arm_rq/arm_dct/mcg command: attempt to access reserved qpn number | |
| BAD_RES_STATE | 0x355534 | modify_qp/arm_rq/arm_dct/mcg command: invalid qp number. | |
| BAD_PARAM | 0x78DA49 | manage_pages: opcode modifier > 2 | |
| BAD_INPUT_LEN | 0x1275FD | manage_pages: bad input length | |
| BAD_OUTPUT_LEN | 0x31F42C | manage_pages: bad output length | |
| BAD_PARAM | 0x6D5FE7 | manage_pages: reserved fields are not zero | |
| BAD_PARAM | 0x557FCD | manage_pages: reserved fields are not zero | |
| BAD_PARAM | 0x453913 | manage_pages: reserved fields are not zero | |
| BAD_SYS_STATE | 0x278A55 | set_hca_cap: can be execute just before init_hca. | |
| BAD_INPUT_LEN | 0x7A2865 | Query HCA capabilities: bad input length | |
| BAD_PARAM | 0x30A05D | set_hca_cap: bad log_uar_page_sz | |
| BAD_PARAM | 0x5B724A | set_hca_cap: bad log_max_qp | |
| BAD_PARAM | 0x2381FC | set_hca_cap: bad log_max_ra_req_qp | |
| BAD_PARAM | 0x0974DA | set_hca_cap: bad log_max_ra_res_qp | |
| BAD_PARAM | 0x5A4D4A | set_hca_cap: bad pkey_table_size | |
| BAD_PARAM | 0x722D0B | set_hca_cap: bad gid_table_size | |
| BAD_PARAM | 0xC324D1 | set_hca_cap: DC is not supported | |
| BAD_PARAM | 0xAFBB66 | access_register PCMR: invalid port | |
| BAD_PARAM | 0x202A95 | access_register PCMR: ib not supported | |
| BAD_PARAM | 0x403D24 | access_register: perf_counters global bad cmd field > 1 | |
| BAD_PARAM | 0x570B1F | access_register: perf_counters cfg bad uint_id | |
| BAD_PARAM | 0x0BBD5E | access_register: perf_counters cfg bad uint_id | |
| BAD_PARAM | 0x08D521 | access_register: perf_counters cfg bad cnt_cmd | |
| BAD_PARAM | 0x32ACF2 | access_register: perf_counters data bad uint_id | |
| BAD_PARAM | 0x21410C | access_register: perf_counters data bad uint_id | |
| BAD_PARAM | 0x00466E | access_register port capabilities: bad port number | |
| BAD_PARAM | 0x478688 | access_register port capabilities: reserved not zero 1st DW | |
| BAD_PARAM | 0x1FB867 | access_register port capabilities: reserved not zero 1st DW | |
| BAD_PARAM | 0x7936EB | access_register loopback ctrl: reserved not zero | |
| BAD_PARAM | 0x5C91E6 | access_register loopback ctrl: bad port number | |
| BAD_PARAM | 0x0B1ED8 | access_register register_pplr illegal port number | |
| BAD_PARAM | 0x0B7411 | access_register power_settings: power_settings_level 0x1-0xfe are reserved | |
| BAD_PARAM | 0x01AD6D | access_register fp_sl_map: 0 is an illegal port number | |
| BAD_PARAM | 0x2505FD | access_register fp_sl_map: only 0x1-0x2 are legal port numbers | |
| BAD_PARAM | 0x1910BB | access_register: misc_counters counter data should be 0 on write | |
| BAD_PARAM | 0x305A09 | access_register: misc_counters write with no counter_select | |
| BAD_PARAM | 0x123424 | access_register_dcbx_param_app : illegal link layer type | |
| BAD_PARAM | 0x342ACB | access_register_dcbx_param_app : insufficient privileges | |
| BAD_PARAM | 0x4367DE | access_register_dcbx_param_app : unsupported project | |
| BAD_PARAM | 0x54FAAA | access_register_qpdp_qtct : illegal link layer type | |
| BAD_PARAM | 0x54EACD | access_register_qpdp_qtct : insufficient privileges | |
| BAD_PARAM | 0x54EACC | access_register_qtct_qpdp : unsupported project | |
| BAD_PARAM | 0x326553 | access_register_qetcr : illegal link layer type | |
| BAD_PARAM | 0x326CCD | access_register_qetcr : insufficient privileges | |
| BAD_PARAM | 0x326EF6 | access_register_qetcr : illegal max_bw_units | |
| BAD_PARAM | 0x326EF1 | access_register_qetcr : illegal max_bw_alloc | |
| BAD_PARAM | 0x326555 | access_register_qetcr : illegal tcg | |
| BAD_PARAM | 0x326554 | access_register_qetcr : unsupported project | |
| BAD_SYS_STATE | 0x0523AB | access_register: cannot access this register_id after init hca | |
| BAD_SYS_STATE | 0x2E733E | access_register: cannot access this register_id before init hca or in nic_interface_type != 0 | |
| BAD_SYS_STATE | 0x192DEB | access_register: cannot access this register_id before init hca | |
| BAD_PARAM | 0x2C16B3 | access_register: reset_counter bad opcode modifyer | |
| BAD_PARAM | 0x24246C | access_register: DB threshold opcode modifyer, legal values 0,1 | |
| BAD_PARAM | 0x6F66BA | access_register PVLC port check: invalid port number | |
| BAD_PARAM | 0x603397 | access_register PVLC port check: register only supported for IB | |
| BAD_PARAM | 0x6C4D48 | this access_register isn't supported yet | |
| BAD_INPUT_LEN | 0x6D5541 | access_register: bad input length | |
| BAD_OUTPUT_LEN | 0x0CFF83 | access_register: bad output length | |
| BAD_PARAM | 0x33CF00 | create_rq/rmp: end_pad_mode must be <= 1 | |
| BAD_PARAM | 0x6AAEBB | create_rq/rmp: log2_hds_buf_size not supported | |
| BAD_PARAM | 0x68D9B8 | create_rq/rmp: hds_skip_first_sge not supported | |
| BAD_PARAM | 0x6A3698 | create_rq/rmp: lwm is not supported | |
| BAD_PARAM | 0x3B8510 | create_rq/rmp: dbr address must be dword aligned | |
| BAD_PARAM | 0x3E8512 | create_rq/rmp: cd_slave is reserved | |
| BAD_PARAM | 0x3B8512 | create_rq/rmp: uar_page is reserved | |
| BAD_PARAM | 0x293DA6 | create_rq/rmp: log wq stride max value is 9 | |
| BAD_PARAM | 0x04D77A | create_rq/rmp: rq_size > MAX_QP_SIZE | |
| BAD_PARAM | 0x193DA6 | create_rq/rmp: log wq stride for rq must be at least 4 | |
| BAD_PARAM | 0x5049A9 | create_rq/rmp: log wq stride for rq with ctrl must be at least 5 | |
| BAD_PARAM | 0x0642F0 | two_byte_shift_en is valid only in striding rq | |
| BAD_PARAM | 0x48A79B | log_wqe_num_of_strides is valid only in striding rq | |
| BAD_PARAM | 0x0443C8 | log_wqe_stride_size is valid only in striding rq | |
| BAD_PARAM | 0x184CB3 | create_rq/rmp: log wq stride for rq linked list must be at least 5 | |
| BAD_PARAM | 0x37F414 | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for rq linked list | |
| BAD_PARAM | 0x07791B | two_byte_shift_en is valid only in striding rq | |
| BAD_PARAM | 0x528685 | log_wqe_num_of_strides is valid only in striding rq | |
| BAD_PARAM | 0x4443F1 | log_wqe_stride_size is valid only in striding rq | |
| BAD_PARAM | 0x2ECC0E | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for cyclic striding rq | |
| BAD_PARAM | 0x183317 | create_rq: log wq stride for striding rq must be at least 5 | |
| BAD_PARAM | 0x1CF9D6 | create_rq/rmp: basic_cyclic_rcv_wqe is reserved for linked list striding rq | |
| BAD_PARAM | 0x52D912 | create_rq: log wq stride for striding rq must be at least 5 | |
| BAD_PARAM | 0x4ADF4E | create_rq/rmp: invalid wq_type | |
| BAD_OP | 0x032626 | create rmp: not supported for issi = 0 | |
| BAD_OUTPUT_LEN | 0x035623 | create rmp: bad output length | |
| BAD_PARAM | 0x2CB7CD | create rmp:log_wq_pg_sz cannot be bigger than 19 (2G) notice 4K units | |
| BAD_PARAM | 0x1049E2 | create rmp: bad opcode modifier | |
| BAD_PARAM | 0xAD604A | create_rmp: only state RDY is supported | |
| BAD_OP | 0x032624 | create srq: not supported for issi != 0 | |
| BAD_OP | 0x032625 | create xrc_srq: not supported for issi = 0 | |
| BAD_INPUT_LEN | 0x032623 | create srq: bad input length | |
| BAD_PARAM | 0x2049E2 | srq commands : bad opcode modifier | |
| BAD_PARAM | 0x111A3F | srq commands: srq buffer too big log_srq_size > LOG_MAX_SRQ_SIZE | |
| BAD_PARAM | 0x011C9D | srq commands: srq buffer too small | |
| BAD_PARAM | 0x220743 | srq commands: srq stride too small | |
| BAD_PARAM | 0x009A93 | srq commands: srq stride too big | |
| BAD_PARAM | 0x20239C | srq commands: srq state is reserved. | |
| BAD_PARAM | 0x1DD605 | srq commands: srq.lwm reserved on create | |
| BAD_PARAM | 0x49D322 | srq commands: srq.wqe_cnt reserved on create | |
| BAD_PARAM | 0x12A54E | srq commands:log_page_size cannot be bigger than 19 (2G) notice 4K units | |
| BAD_PARAM | 0x441D01 | srq commands: basic_cyclic_rcv_wqe not supported | |
| BAD_RESOURCE | 0x1B118E | query_srq/arm_srq: attempt to access reserved srqn | |
| BAD_RES_STATE | 0x785B7D | query_srq/arm_srq: bad srq index | |
| BAD_OP | 0x031624 | query srq: not supported for issi != 0 | |
| BAD_OUTPUT_LEN | 0x4B57A5 | query_srq: bad output length | |
| BAD_PARAM | 0x65FE9A | query_srq: bad opcode modifier | |
| BAD_OUTPUT_LEN | 0x4B57A6 | query_rmp: bad output length | |
| BAD_PARAM | 0x65FE96 | query_rmp: bad opcode modifier | |
| BAD_OP | 0x5937D1 | bad opcode. | |
| BAD_INPUT_LEN | 0x21D355 | attach_detach_from_mcg: bad input length | |
| BAD_OP | 0x00C396 | attach_detach_from_mcg: bad opcode modifier | |
| BAD_PARAM | 0x65CBA5 | attach_detach_from_mcg: illegal mcg address | |
| BAD_PARAM | 0x3B3207 | attach_detach_from_mcg: can't attach qp with connected transport type to mcg | |
| BAD_INPUT_LEN | 0x3822D9 | generate_eqe: bad input length | |
| BAD_OUTPUT_LEN | 0x0697FB | generate_eqe: bad output length | |
| BAD_OP | 0x2BC31B | bad opcode. | |
| BAD_PARAM | 0x55DFA3 | bad op_mod | |
| BAD_OUTPUT_LEN | 0x47D8A0 | arm_rq: bad output length | |
| BAD_PARAM | 0x0D6045 | arm_rq: (opcode mod == 0) | |
| BAD_OUTPUT_LEN | 0x4ED8A0 | modify_rmp: bad output length | |
| BAD_PARAM | 0x0D604E | modify_rmp: opcode_mode is reserved | |
| BAD_PARAM | 0x0D604A | modify_rmp: only state RDY is supported | |
| BAD_PARAM | 0x0D123B | modify_rmp: only bit 0 in modify_bitmask is valid | |
| BAD_OUTPUT_LEN | 0x347AD9 | arm_dct_for_key_violation: bad output length | |
| BAD_PARAM | 0x79876F | arm_dct_for_key_violation: (opcode mod != 0) | |
| BAD_INPUT_LEN | 0x0166EB | set_mad_demux: bad input length | |
| BAD_INPUT_LEN | 0x45E8DB | query_vport_counter: bad input length | |
| BAD_OUTPUT_LEN | 0x7F4257 | query_vport_counter: bad output length | |
| BAD_PARAM | 0x0F5C3F | query_vport_counter: op_mod is reserved | |
| BAD_INPUT_LEN | 0x7F403F | rst2init_qp: bad input length | |
| BAD_PARAM | 0x42D0D3 | rst2init_qp: bad opcode modifier | |
| BAD_PARAM | 0x51C12E | rst2init_qp: opt_param_mask != 0 | |
| BAD_RES_STATE | 0x0E5ACC | rst2init_qp: invalid qp number. | |
| BAD_QP_STATE | 0x22D561 | rst2init_qp: qp is not in reset state | |
| BAD_PARAM | 0xC3C061 | create_qp: lag_tx_port_affinity not suppoerted. | |
| BAD_PARAM | 0x4A11A2 | create_qp: lag_tx_port_affinity supported only for lag master. | |
| BAD_PARAM | 0x26319E | create_qp: bad lag_tx_port_affinity | |
| RESOURCE_BUSY | 0x5D75A3 | activate_tracer: hw tracer is already used by code coverage | |
| BAD_PARAM | 0x15A5F8 | activate_tracer: bad_mkey, cannot be used for address translation | |
| BAD_PARAM | 0x0B6F45 | activate_tracer: bad mkey, length must be 4K aligned | |
| BAD_PARAM | 0x0B6F44 | activate_tracer: bad mkey, local write is not enabled | |
| RESOURCE_BUSY | 0x60DF34 | activate_tracer: tracer is already activated | |
| BAD_PARAM | 0x46D451 | vport commands: insufficient privileges | |
| BAD_PARAM | 0x35E4FF | vport commands: bad port_number. vport number is too high | |
| BAD_PARAM | 0x0754A4 | vport commands: bad port_number, vport number must be 0 if input_other_vport is not set. | |
| BAD_OP | 0x085BFF | set_pp_rate_limit: bad op_mod | |
| BAD_OP | 0x3123B1 | set_pp_rate_limit: command is valid only for ethernet port | |
| BAD_PARAM | 0x1BBB67 | set_pp_rate_limit_cmd: packet pacing is not allowed | |
| BAD_PARAM | 0x145667 | set_pp_rate_limit_cmd: rate limit index 0 is reserved | |
| BAD_PARAM | 0xCDF667 | set_pp_rate_limit_cmd: rate_limit_index is too high | |
| BAD_PARAM | 0x356667 | set_pp_rate_limit_cmd: rate limit value is too high | |
| BAD_PARAM | 0x358767 | set_pp_rate_limit_cmd: rate limit value is too low | |
| BAD_OP | 0x345BFF | query_pp_rate_limit: bad op_mod | |
| BAD_OP | 0x7723B1 | query_pp_rate_limit: command is valid only for ethernet port | |
| BAD_PARAM | 0x1BFF67 | query_pp_rate_limit_cmd: packet pacing is not allowed | |
| BAD_PARAM | 0x14F567 | query_pp_rate_limit_cmd: rate limit index 0 is reserved | |
| BAD_PARAM | 0x149867 | query_pp_rate_limit_cmd: rate_limit_index is too high | |
| BAD_PARAM | 0x1CCC67 | create_sq/modify_sq: packet pacing is not allowed | |
| BAD_PARAM | 0xCFBB67 | create_sq/modify_sq: rate_limit_index is too high | |
| BAD_OP | 0x341541 | create_sq: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x7CF9E6 | create sq: bad input length | |
| BAD_PARAM | 0x551925 | create_sq: bad opcode_modifier | |
| BAD_PARAM | 0x11D40A | create_sq: log_wq_pg_sz cannot be bigger than 19 (2G) | |
| BAD_PARAM | 0x4E4B51 | create_sq: sq state must be RST | |
| BAD_PARAM | 0x17A194 | create_sq: dbr_address must be dword aligned | |
| BAD_PARAM | 0x5F5A07 | create_sq: wq_type must be 1 | |
| BAD_PARAM | 0x27A8E4 | create_sq: sq_size > MAX_QP_SIZE | |
| BAD_PARAM | 0x0AC270 | create_sq: bad uar number | |
| BAD_PARAM | 0x111FE2 | create_sq: wq stride must be precisely 6 | |
| BAD_PARAM | 0x162D0B | create_sq: max tis_lst_sz is 1 | |
| BAD_PARAM | 0x1B2418 | create_sq: tis_num_0 is reserved for tis_lst_sz=0 | |
| BAD_PARAM | 0x02974A | create_sq: allow_multi_pkt_send_wqe is not supported | |
| BAD_PARAM | 0x2B4746 | create_sq: sq.min_wqe_inline_mode must be >= nic_vport.min_sq_wqe_inline_mode | |
| BAD_OP | 0xBCE989 | modify_sq: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x9CF9E6 | modify sq: bad input length | |
| BAD_PARAM | 0x551995 | modify_sq: bad opcode_modifier | |
| BAD_RESOURCE | 0x60CD18 | modify_sq: resource is not valid | |
| BAD_PARAM | 0x51CFBC | modify_sq: input sq_state does not match current state | |
| BAD_PARAM | 0x51CFB0 | modify_sq: err2rdy state transition is not supported | |
| BAD_PARAM | 0x5333B0 | modify_sq: rst2err state transition is not supported | |
| BAD_PARAM | 0x73B4B1 | modify_sq: support packet pacing rate limit index only | |
| BAD_PARAM | 0x245671 | modify_sq: packet_pacing_index change is allowed only for rst2rdy, rdy2rdy | |
| BAD_OP | 0x2CD8A2 | create_rq: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x754762 | create_rq: bad input length | |
| BAD_PARAM | 0x57CFFB | create_rq: bad opcode_modifier | |
| BAD_PARAM | 0x724AEC | create_rq: rq state must be RDY | |
| BAD_PARAM | 0x373E7E | create_rq: log_wq_pg_sz cannot be bigger than 19 (2G) | |
| BAD_PARAM | 0x71CE3F | create_rq: RMP is not supported | |
| BAD_PARAM | 0x3BD828 | create_rq: undefined wq_type | |
| BAD_OP | 0x1AF075 | modify_rq: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x6CF9E6 | modify rq: bad input length | |
| BAD_PARAM | 0x551965 | modify_rq: bad opcode_modifier | |
| BAD_RESOURCE | 0x671AD0 | modify_rq: resource is not valid | |
| BAD_PARAM | 0x669FBA | modify_rq: rst2err state transition is not supported | |
| BAD_PARAM | 0x51CFBA | modify_rq: err2rdy state transition is not supported | |
| BAD_PARAM | 0x7ACDB1 | modify_rq: invalid modify bitmask | |
| BAD_PARAM | 0x24A3B1 | modify_rq: vsd/lwm/scatter_fcs change is allowed only for rst2rdy, rdy2rdy | |
| BAD_PARAM | 0x538B5F | create/modify_rqt: rqt_max_size > MAX_RQT_SIZE | |
| BAD_PARAM | 0x538FAF | create/modify_rqt: rqt_actual_size > rqt_max_size | |
| BAD_PARAM | 0x538FAB | create/modify_rqt: rqt actual size must be a power of 2 | |
| BAD_PARAM | 0x538FCB | create/modify_rqt: rqt max size must be a power of 2 | |
| BAD_PARAM | 0x539FDB | create/modify_rqt: rqt size must be > 0 | |
| BAD_PARAM | 0x698B5F | modify_rqt: only bit 0 is valid in modify_bitmask | |
| BAD_OP | 0xFE2CCD | create_tis: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x0DE7A0 | create_tis: bad input length | |
| BAD_PARAM | 0x6A5278 | create_tis: bad opcode modifier | |
| BAD_PARAM | 0x564B4C | create_tis: strict_affinity cannot have lag_tx_port_affinity | |
| BAD_PARAM | 0x5978A9 | create_tis: lag_tx_port_affinity not suppoerted. | |
| BAD_PARAM | 0x44F1F9 | create_tis: lag_tx_port_affinity supported only for lag master. | |
| BAD_PARAM | 0x595B5D | create_tis: bad lag_tx_port_affinity | |
| BAD_OP | 0xFE1BA3 | create/modify_tir: command is valid only for ethernet port | |
| BAD_PARAM | 0x709018 | create modify tir: bad opcode_modifier | |
| BAD_PARAM | 0x4C0EC1 | create tir: disp_type value can be 0 or 1 | |
| BAD_PARAM | 0x4B0519 | create/modify_tir: indirect_table is reserved for disp_type direct | |
| BAD_PARAM | 0x4B0518 | create/modify_tir: direct_rqn is reserved for disp_type indirect | |
| BAD_PARAM | 0x75C809 | create_tir: invalid self_lb_block | |
| BAD_PARAM | 0x177FBD | modify_tir: bitmask value is not legal | |
| BAD_PARAM | 0x177FDD | modify_tir: disp_type is reserved | |
| BAD_PARAM | 0x4C0519 | modify_tir: inline_rqn is reserved | |
| BAD_RESOURCE | 0x47B03E | modify_tir: invalid tir | |
| BAD_PARAM | 0x2D1EEC | create/modify_tir: bitmask value is not legal for disp_type direct | |
| BAD_PARAM | 0x177FDE | create/modify_tir: indirect_table is reserved | |
| BAD_PARAM | 0x30EC1E | create/modify_tir: lro params are reserved if lro_enable_mask not set | |
| BAD_PARAM | 0x793CE4 | create/modify_tir: lro params are reserved if lro_enable_mask not set | |
| BAD_PARAM | 0x176FDE | modify_tir: lro params are reserved if lro bitmask not set | |
| BAD_PARAM | 0x178FDE | modify_tir: lro params are reserved if lro bitmask not set | |
| BAD_PARAM | 0x179FDE | modify_tir: lro params are reserved if lro bitmask not set | |
| BAD_PARAM | 0x0479A3 | create modify tir: invalid rx_hash_fn | |
| BAD_PARAM | 0x067146 | create modify tir: disp_type is indirect, but rx_hash_fn is none | |
| BAD_PARAM | 0x727E5F | create modify tir: rx_hash_fn is none, but rx_hash_symmetric is not reserved | |
| BAD_PARAM | 0x1D2602 | create modify tir: rx_hash_fn must be NONE for disp_type direct | |
| BAD_PARAM | 0x569EE6 | create modify tir: rx_hash_fn is not toeplitz, but rx_hash_toeplitz_key is not reserved | |
| BAD_PARAM | 0x3C59ED | create modify tir: rx_hash_fn is none, but outer hash selectors aren't reserved | |
| BAD_PARAM | 0x1C914B | create modify tir: rx_hash_fn is none, but inner hash selectors aren't reserved | |
| BAD_PARAM | 0x201139 | create modify tir: stateless tunneled offload is not supported | |
| BAD_PARAM | 0x562B00 | create modify tir: rx_hash_field_selector_inner is valid only when tunneled_offload_en is set | |
| BAD_PARAM | 0x001139 | create modify tir: inner/outer hash selectors are mutual exclusive | |
| BAD_PARAM | 0x76D4CC | create modify tir: invalid outer hash field selector | |
| BAD_PARAM | 0x21D95B | create modify tir: invalid inner hash field selector | |
| BAD_PARAM | 0x4F161A | create modify tir: rx_hash modify_bitmask isn't set, but rx_hash_symmetric is not reserved | |
| BAD_PARAM | 0x514708 | create modify tir: rx_hash modify_bitmask isn't set, but rx_hash_fn is not reserved | |
| BAD_OP | 0x11ABF1 | alloc_encap: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x0C6C1D | alloc_encap: bad input length | |
| BAD_OP | 0x348FBD | alloc_encap: bad opcode modifier | |
| BAD_PARAM | 0x8E3120 | alloc_encap: bad encap_header_size | |
| BAD_PARAM | 0x46618F | alloc_encap: bad encap_header_size + 2 must be align to 4 | |
| BAD_PARAM | 0x46618E | alloc_encap: bad encap_header_type | |
| BAD_OUTPUT_LEN | 0x51552B | query_nic_vport_context: bad output length | |
| BAD_OUTPUT_LEN | 0x3B7FBF | query_nic_vport_context: bad input length | |
| BAD_OP | 0x2F4BF1 | query_nic_vport_context: command is valid only for ethernet port | |
| BAD_PARAM | 0x2B196F | query_nic_vport_context: op_mod is reserved | |
| BAD_OUTPUT_LEN | 0x554267 | modify_nic_vport_context: bad output length | |
| BAD_OUTPUT_LEN | 0x2E83D3 | modify_nic_vport_context: bad input length | |
| BAD_OP | 0x4E4CE0 | modify_nic_vport_context: command is valid only for ethernet port | |
| BAD_PARAM | 0x3F26DC | modify_nic_vport_context: op_mod is reserved | |
| BAD_PARAM | 0x19320A | modify_nic_vport_context: insufficient privileges, cannot modfiy other vports address_list/roce/ptomisc | |
| BAD_PARAM | 0x5EE994 | modify_nic_vport_context: vport group manager can not modify its own min_wqe_inline_mode/port_guid/node_guid/permanent_addr | |
| BAD_PARAM | 0x19356A | modify_nic_vport_context: only vport group manager is allowed to modify change_events/min_wqe_inline_mode/port_guid/node_guid/permanent_addr | |
| BAD_PARAM | 0xC1F678 | modify_nic_vport_context: roce_en set on a vport that doesn't support roce | |
| BAD_INPUT_LEN | 0x33FFA3 | query_esw_vport_context: bad input len | |
| BAD_OUTPUT_LEN | 0x23DF67 | query_esw_vport_context: bad output len | |
| BAD_OP | 0x116BCC | query_esw_vport_context: op_mod is reserved | |
| BAD_OP | 0x4EAFE7 | query_esw_vport_context: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x2BDAA3 | modify_esw_vport_context: bad input len | |
| BAD_OUTPUT_LEN | 0x23D456 | modify_esw_vport_context: bad output len | |
| BAD_OP | 0x266AAB | modify_esw_vport_context: op_mod is reserved | |
| BAD_OP | 0x433CE0 | modify_esw_vport_context: command is valid only for ethernet port | |
| BAD_PARAM | 0x326B6C | modify_esw_vport_context: svlan_insert is set but svlan_insert_field_select is off | |
| BAD_PARAM | 0x735020 | modify_esw_vport_context: svlan_insert is off but svlan fields are not reserved | |
| BAD_PARAM | 0x2D76B3 | modify_esw_vport_context: cvlan_insert is set but cvlan_insert_field_select is off | |
| BAD_PARAM | 0x32C8AB | modify_esw_vport_context: cvlan_insert is off but cvlan fields are not reserved | |
| BAD_INPUT_LEN | 0x44BC7C | set_roce_address: bad input len | |
| BAD_OUTPUT_LEN | 0x7FDB57 | set_roce_address: bad output len | |
| BAD_OP | 0x427418 | set_roce_address: command is valid only for ethernet port | |
| BAD_OP | 0x427419 | set_roce_address: op_mod is reserved | |
| BAD_PARAM | 0x26D532 | set_roce_address: vlan id is reserved when vlan_valid=0 | |
| BAD_PARAM | 0x729BBB | set_roce_address: invalid roce_l3_type type | |
| BAD_PARAM | 0x12822D | set_roce_address: invalid roce_version | |
| BAD_PARAM | 0x79DF98 | set_roce_address: for roce_version=0, roce_l3_type is reserved | |
| BAD_INDEX | 0x063C65 | set_roce_address: roce_address_index not valid | |
| BAD_PARAM | 0x063C66 | set_roce_address: multicast source_mac is not allowed | |
| BAD_OP | 0xAAFD4F | vport commands: command is valid only for ethernet port | |
| BAD_PARAM | 0x493CC9 | vport commands: bad port_number. vport number is too high | |
| BAD_PARAM | 0x63993F | query_vport_state: query uplink state - vport_number/other_vport is reserved | |
| BAD_PARAM | 0x311733 | vport commands: not privileged | |
| BAD_PARAM | 0x457F0C | vport commands:: not privileged | |
| BAD_PARAM | 0x36A82E | flow_table: esw fdb configuration is valid only for vport_group_manager | |
| BAD_PARAM | 0x4DAD27 | flow_table: unsupported table_type | |
| BAD_PARAM | 0x2AC754 | flow_table: currently Flow Table does not supports IB port | |
| BAD_PARAM | 0x7684D8 | flow_table: other_vport is valid only for ACL flow tables | |
| BAD_RES_STATE | 0x98AFBB | create_flow_table: encap FT creation is allowed only if all VFs aren't initialized | |
| BAD_PARAM | 0x857045 | create_flow_table: lag_master_next_table_id is reserevd for non LAG demux FT | |
| BAD_PARAM | 0x5F1732 | create_flow_table: table log_size > FT_LOG_MAX_SIZE | |
| BAD_PARAM | 0x6678D3 | create_flow_table: invalid table_miss_mode | |
| BAD_PARAM | 0x66F5E4 | create_flow_table: table_miss_id is reserved when miss_mode != 1 | |
| BAD_PARAM | 0xE2A3AA | create_flow_table: LAG demux FT is supported only for the LAG master | |
| BAD_PARAM | 0x3F3277 | create_flow_table: LAG demux FT is supported only for RX NIC FT | |
| BAD_PARAM | 0x04EE19 | create_flow_table: table log_size is reserevd for LAG demux FT | |
| BAD_PARAM | 0xFA64A1 | create_flow_table: table_miss_mode is reserevd for LAG demux FT | |
| BAD_PARAM | 0x8FCF23 | create_flow_table: table_miss_id is reserevd for LAG demux FT | |
| BAD_PARAM | 0xED3492 | create_flow_table: encap_en is reserevd for LAG demux FT | |
| BAD_PARAM | 0x705D9D | create_flow_table: decap_en is reserevd for LAG demux FT | |
| BAD_OP | 0x7A9C87 | create_flow_table: invalid op_mod | |
| BAD_PARAM | 0x5578D3 | create_flow_table: table level > FT_MAX_LEVEL | |
| BAD_PARAM | 0xA05644 | create_flow_table: Table doesn't support encap | |
| BAD_PARAM | 0x69269E | create_flow_table: Table doesn't support decap | |
| BAD_OP | 0x4078BE | modify_flow_table: op_mod is reserved | |
| BAD_PARAM | 0x5F8189 | modify_flow_table: illegal modify_field_select | |
| BAD_PARAM | 0x056B12 | modify_flow_table: illegal modify_field_select for LAG demux FT | |
| BAD_PARAM | 0x42A3E8 | modify_flow_table: modofing the LAG demux next table is allowed only for LAG demux FT | |
| BAD_PARAM | 0x4EF5E3 | modify_flow_table: invalid table_miss_mode | |
| BAD_PARAM | 0x4EF5E4 | modify_flow_table: table_miss_id is reserved when miss_mode != 1 | |
| BAD_INPUT_LEN | 0x67847C | create_flow_group: bad input len | |
| BAD_OUTPUT_LEN | 0x527B57 | create_flow_group: bad output len | |
| BAD_OP | 0x0E5810 | create_flow_group: op_mod is reserved | |
| BAD_PARAM | 0x1D1B31 | create_flow_group: start_flow_index is bigger than end_flow_index | |
| BAD_PARAM | 0x4065F0 | create_flow_group: end_flow_index >= FT_MAX_SIZE | |
| BAD_PARAM | 0xAE9A70 | create_flow_group: creating flow group in the LAG demux FT is forbidden | |
| BAD_INPUT_LEN | 0x2BDEBE | set_flow_table_entry: bad input len | |
| BAD_OUTPUT_LEN | 0x11FF56 | set_flow_table_entry: bad output len | |
| BAD_OP | 0x5342CD | set_flow_table_entry: invalid op_mod | |
| BAD_PARAM | 0x1C57DD | set_flow_table_entry: modify_enable_mask is reserved | |
| BAD_PARAM | 0x2022FB | set_flow_table_entry: illegal modify_enable_mask | |
| BAD_PARAM | 0x5FAB40 | set_flow_table_entry: invalid flow_index | |
| BAD_PARAM | 0xFDBD26 | set_flow_table_entry: flow_tag not supported for this flow table type | |
| BAD_PARAM | 0x4731C4 | set_flow_table_entry: flow_counter doesn't support for this flow table type | |
| BAD_PARAM | 0x0D5EF2 | set_flow_table_entry: currently only one flow counter is supported per flow | |
| BAD_PARAM | 0x603D26 | set_flow_table_entry: trying to set a new flow table entry but flow index already exist | |
| BAD_PARAM | 0x883D26 | set_flow_table_entry: trying to modify flow table entry but flow index does not exist | |
| BAD_PARAM | 0x144B7A | set_flow_table_entry: flow table entry must has exactly one action set (fwd/drop/allow) | |
| BAD_PARAM | 0x4DDEE6 | set_flow_table_entry: flow_counter_list_size is valid iff count action is set | |
| BAD_PARAM | 0x214DE0 | set_flow_table_entry: destination_list_size is valid iff fwd action is set | |
| BAD_PARAM | 0x3E29DE | set_flow_table_entry: destination_list_size greater than max supported | |
| BAD_PARAM | 0x155B7A | set_flow_table_entry: encap_id is reserved while encap action is off | |
| BAD_PARAM | 0x62AD2F | set_flow_table_entry: decap action not supported on this device | |
| BAD_PARAM | 0x5BDC28 | set_flow_table_entry: FT_ACTION_ENCAP action in a table without encap_en | |
| BAD_PARAM | 0x604D25 | set_flow_table_entry: FT_ACTION_DECAP action in a table without decap_en | |
| BAD_PARAM | 0x3322FB | set_flow_table_entry: illegal action | |
| BAD_PARAM | 0x5FAB41 | delete_flow_table_entry: invalid flow_index | |
| BAD_OP | 0x3EB7E7 | delete_flow_table_entry: op_mod is reserved | |
| BAD_PARAM | 0x4EFC3D | delete_flow_table_entry: rule doesn't exist | |
| BAD_INPUT_LEN | 0x1D1437 | query_flow_table_entry: bad input len | |
| BAD_OUTPUT_LEN | 0x611D98 | query_flow_table_entry: bad output len | |
| BAD_OP | 0x0AB1E9 | query_flow_table_entry: op_mod is reserved | |
| BAD_PARAM | 0x5FAB42 | query_flow_table_entry: invalid flow_index | |
| BAD_PARAM | 0x63213B | query_flow_table_entry: rule doesn't exist | |
| BAD_PARAM | 0x706441 | l2_table_entry: l2 table configuration is valid only for vport_group_manager | |
| BAD_PARAM | 0x471805 | l2_table_entry: l2 table commands are not supported for port type ib | |
| BAD_PARAM | 0x03A55E | l2_table_entry: table_index > MAX_L2_TABLE_SIZE | |
| BAD_OP | 0x11AFD1 | l2_table_entry: op_mod is reserved | |
| BAD_PARAM | 0x4E810D | query/dealloc_flow_counter: flow_counter_ix is reserved | |
| BAD_PARAM | 0x05DC2C | query/dealloc_flow_counter: flow_counter_ix doesn't exist | |
| BAD_OP | 0x53F4BF1| query_flow_counter: command is valid only for ethernet port | |
| BAD_OP | 0x04020A | query_flow_counter: op_mod is reserved | |
| BAD_PARAM | 0xFFD2A0 | query_flow_counter: clear is not supported when reading bulk | |
| BAD_PARAM | 0x1737C5 | query_bulk_flow_counter: num_counters is too big | |
| BAD_PARAM | 0x14F472 | query_bulk_flow_counter: num_counters is bigger than num of HW counters | |
| BAD_PARAM | 0xC2AF44 | query_bulk_flow_counter: flow_counter_ix is not cache aligned (4 counters) | |
| BAD_PARAM | 0x7EA3B3 | query_bulk_flow_counter: number of counters is not cache aligned (4 counters) | |
| BAD_OUTPUT_LEN | 0x263839 | query_flow_counter: bad output lengt | |
| BAD_PARAM | 0x0E701A | add_vxlan_udp_dport: only PFs are allowed to modify the vxlan dport | |
| BAD_PARAM | 0x03E78D | add_vxlan_udp_dport: vxlan commands are not supported for port type ib | |
| BAD_PARAM | 0x1595FA | add_vxlan_udp_dport: udp port 0 is illegal | |
| BAD_INPUT_LEN | 0x6C8FBB | add_vxlan_udp_dport: bad input len | |
| BAD_OUTPUT_LEN | 0x6D7E67 | add_vxlan_udp_dport: bad output len | |
| BAD_OP | 0x62F4C9 | add_vxlan_udp_dport: op_mod is reserved | |
| BAD_PARAM | 0x79D920 | delete_vxlan_udp_dport: only PFs are allowed to modify the vxlan dport | |
| BAD_PARAM | 0x091DB1 | delete_vxlan_udp_dport: vxlan commands are not supported for port type ib | |
| BAD_INPUT_LEN | 0x5BBF13 | delete_vxlan_udp_dport: bad input len | |
| BAD_OUTPUT_LEN | 0x66B6FC | delete_vxlan_udp_dport: bad output len | |
| BAD_OP | 0x0641AF | delete_vxlan_udp_dport: op_mod is reserved | |
| BAD_PARAM | 0x249AD6 | check_modify_cong_params_ecn_rp: dec_fac should be in 0-100 range | |
| BAD_PARAM | 0x7076FC | check_modify_cong_params_qcn_rp: dec_fac should be in 0-100 range | |
| BAD_INPUT_LEN | 0x5BEEFD | check_modify_cong_params:bad input len | |
| BAD_OUTPUT_LEN | 0x70CE1A | check_modify_cong_params:bad output len | |
| BAD_PARAM | 0x58C4C9 | check_modify_cong_params:cong_protocol unsupprted protocol | |
| BAD_INPUT_LEN | 0x5B6843 | check_query_cong_params:bad input len | |
| BAD_OUTPUT_LEN | 0x0D468B | check_query_cong_params:bad output len | |
| BAD_PARAM | 0x325A82 | check_query_cong_params:cong_protocol unsupprted protocol | |
| BAD_INPUT_LEN | 0x5A48F1 | check_modify_cong_status:bad input len | |
| BAD_OUTPUT_LEN | 0x41F0EA | check_modify_cong_status:bad output len | |
| BAD_PARAM | 0x38252F | check_modify_cong_status:cong_protocol unsupprted protocol | |
| BAD_PARAM | 0x27A3FB | check_modify_cong_status:tag enable is only valid for QCN | |
| BAD_INPUT_LEN | 0x2498E2 | check_query_cong_status:bad input len | |
| BAD_OUTPUT_LEN | 0x245260 | check_query_cong_status:bad output len | |
| BAD_PARAM | 0x507EE9 | check_query_cong_status:cong_protocol unsupprted protocol | |
| BAD_SYS_STATE | 0x2207A9 | enable_hca: HCA already enabled | |
| BAD_SYS_STATE | 0x2DC0EB | enable_hca: bad state LAG ENABLE | |
| BAD_SYS_STATE | 0x075C88 | enable_hca: function_id already enabled | |
| BAD_SYS_STATE | 0x034D7C | disable_hca: error, teardown_hca required before disable_hca | |
| BAD_PARAM | 0x239208 | bad PAS - reserved not zero | |
| BAD_OP | 0x3590F5 | bad opcode, or opcode not supported in this device | |
| BAD_RES_STATE | 0x30F433 | destroy_eq: eqn in use or doesn't exist | |
| EXCEED_LIM | 0x7957C3 | create_eq: fail to allocate eqn | |
| EXCEED_LIM | 0x54B156 | create_eq: fail to allocate/map mtt index | |
| BAD_RES_STATE | 0x1870AD | destroy cq: cqn in use or doesn't exist | |
| EXCEED_LIM | 0x0E0E82 | create_cq: fail to allocate cqn | |
| BAD_RESOURCE | 0x0C43F4 | create_cq: eqn doesn't exist | |
| EXCEED_LIM | 0x62BBC6 | create_cq: fail to allocate mtt index | |
| BAD_OP | 0x7A5594 | bad opcode | |
| EXCEED_LIM | 0x777543 | resize cq: failed to allocate MTT number | |
| EXCEED_LIM | 0x0366A2 | modify_cq: CQ in already in error, can not resize CQ | |
| BAD_SYS_STATE | 0x711B8C | resize_cq: failed to read CQ consumer index | |
| BAD_SIZE | 0x1900B2 | resize_cq: current number of outstanding CQEs greater than new CQ size, or no space for magic CQE in old CQ | |
| BAD_RESOURCE | 0x67239E | create_cq: eqn doesn't exist | |
| BAD_RESOURCE | 0x7AEF6C | config int moderation - failed to access msix | |
| EXCEED_LIM | 0x587239 | alloc_q_counter: failed to allocate q_counter resource number | |
| BAD_RES_STATE | 0x1235F1 | dealloc_q_counter: q_counter doesn't exist | |
| BAD_OUTPUT_LEN | 0x723EAD | query_q_counter: bad output length | |
| EXCEED_LIM | 0x587439 | alloc_pd: failed to allocate pd resource number | |
| BAD_RESOURCE | 0x3AB806 | dealloc_pd: bad op_mod | |
| BAD_RESOURCE | 0x593117 | dealloc_pd: attempt to access reserved pd | |
| BAD_RES_STATE | 0x31B635 | dealloc_pd: pd number in use or doesn't exist | |
| EXCEED_LIM | 0x587939 | alloc_xrcd: failed to allocate xrcd resource number | |
| BAD_RESOURCE | 0x59D214 | dealloc_xrcd: bad op_mod | |
| BAD_RES_STATE | 0x391F01 | dealloc_xrc_domain: xrcd number in use or doesn't exist | |
| EXCEED_LIM | 0x5A7939 | alloc_uar: failed to allocate uar resource number | |
| BAD_RESOURCE | 0x6273DA | dealloc_xrcd: bad op_mod | |
| BAD_RESOURCE | 0x1AC5B8 | dealloc_uar: attempt to access reserved uar index | |
| BAD_RES_STATE | 0x4B4EDB | dealloc_uar: uar number in use or doesn't exist | |
| BAD_RESOURCE | 0x775607 | destroy_mkey: attempt to access reserved mkey_ix | |
| BAD_PARAM | 0x76093F | destroy_mkey: bad op_mod | |
| BAD_RES_STATE | 0x77502E | destroy_mkey: mkey index in use or doesn't exist | |
| BAD_INDEX | 0x6919FE | create_mkey: failed to allocate resource_number number as requested number already allocated | |
| EXCEED_LIM | 0x018AF6 | create_mkey: failed to allocate resource_number number (most likely out of resources) | |
| EXCEED_LIM | 0x59C8A4 | create mkey: fail to allocate mtt/klm index | |
| EXCEED_LIM | 0x6D50E5 | create mkey: fail to allocate bsf index | |
| EXCEED_LIM | 0x22F901 | create_psv: fail to allocate psv index | |
| BAD_RES_STATE | 0x4A3FD3 | generate_eqe: eq buffer is full. | |
| BAD_PARAM | 0x4F8BB9 | destroy_srq: bad opcode modifier | |
| BAD_RESOURCE | 0x70D476 | destroy_srq: attempt to access reserved srqn | |
| BAD_RES_STATE | 0x7F252E | destroy srq: srqn in use or doesn't exist | |
| BAD_PARAM | 0x4F8B89 | destroy_rmp: bad opcode modifier | |
| BAD_RESOURCE | 0x80D476 | destroy_rmp: attempt to access reserved srqn | |
| BAD_RES_STATE | 0x7F252F | destroy rmp: rmp in use or doesn't exist | |
| BAD_RESOURCE | 0x5E9E82 | create_srq: cqn doesn't exist | |
| BAD_INPUT_LEN | 0x3291EE | create srq: bad input length | |
| EXCEED_LIM | 0x3F947D | create_srq: fail to allocate/map mtt index | |
| EXCEED_LIM | 0x4291E8 | create_rmp: fail to allocate rmp number | |
| BAD_PARAM | 0x892E1C | create_srq: rmp mailbox was illegally modified during proccess | |
| EXCEED_LIM | 0x3291E8 | create_srq: fail to allocate srq number | |
| BAD_PARAM | 0x792E1C | create_srq: input mailbox was illegally modified during proccess | |
| BAD_PARAM | 0x1038B8 | create_srq: input mailbox was illegally modified during proccess | |
| BAD_PARAM | 0x3A3846 | manage/query_pages, enable/disable_hca: function_id exceedes number of VFs | |
| BAD_PARAM | 0x6BA1F4 | manage/query_pages, enable/disable_hca: function_id != 0, VF cannot manage pages for other VFs. | |
| BAD_OUTPUT_LEN | 0x24D543 | query_pages: bad output length | |
| BAD_PARAM | 0x27D71D | manage pages: (add) pages are not required | |
| BAD_INPUT_LEN | 0x14AD24 | manage pages: bad input length | |
| BAD_PARAM | 0x659C0E | manage pages: more pages than required | |
| BAD_OUTPUT_LEN | 0x285C19 | manage pages: (return) bad output length | |
| BAD_SYS_STATE | 0x4E2106 | manage pages: failed to read io or write host mem | |
| BAD_SYS_STATE | 0x0E8912 | manage pages: failed read from host mem | |
| BAD_SYS_STATE | 0x7731B2 | manage pages: failed write to mailbox | |
| BAD_INPUT_LEN | 0x0AA602 | mad_ifc: bad input length | |
| BAD_OUTPUT_LEN | 0x021907 | mad_ifc: bad output length | |
| BAD_PARAM | 0x71D624 | mad_ifc: opcode modifier > 3 | |
| BAD_PARAM | 0x220275 | mad_ifc: is not supported. | |
| BAD_PARAM | 0x7424DA | mad_ifc: invalid port number | |
| BAD_PKT | 0x62FA16 | mad_ifc: bad packet without detailed syndrome. | |
| BAD_PKT | 0x5BE4CF | mad_ifc: bad packet - long process | |
| BAD_PARAM | 0x5282CF | set_hca_cap: bad params (reserved not zero) | |
| BAD_INPUT_LEN | 0x7B2863 | set_hca_cap atomic capabilities: bad input length | |
| BAD_PARAM | 0x6C2823 | set_hca_cap atomic capabilities: unsupported when mode1=0 | |
| BAD_OUTPUT_LEN | 0x28FF76 | set_hca_cap, unsupported op_mod (currently only 0 and 3 are supported) | |
| BAD_PARAM | 0x5ADD95 | Query hca_cap: bad op_mod | |
| BAD_OUTPUT_LEN | 0x38FF78 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF77 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF76 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0xD38425 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x6B345A | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x6B4E7A | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF75 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF73 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x38FF72 | query_hca_cap: bad output length | |
| BAD_PARAM | 0x068B46 | query_hca_cap: e-switch capabilities allowed only for vport_group_manager | |
| BAD_OUTPUT_LEN | 0x38FF79 | query_hca_cap: bad output length | |
| BAD_PARAM | 0x2895B0 | query_hca_cap: e-switch capabilities allowed only for vport_group_manager | |
| BAD_OUTPUT_LEN | 0x38FF74 | query_hca_cap: bad output length | |
| BAD_OUTPUT_LEN | 0x607301 | query_hca_cap: vector calc cap bad output length | |
| BAD_PARAM | 0x5ADD96 | Query hca_cap: bad op_mod | |
| BAD_OUTPUT_LEN | 0x726C77 | Query adapter: bad output length | |
| BAD_PARAM | 0x471AEF | Query adapter: bad op_mod | |
| BAD_PARAM | 0x1E5585 | reg_access_ports_perf_counters: bad params | |
| BAD_PARAM | 0x450452 | access_register port capabilities: write option is not supported | |
| BAD_PARAM | 0x01D849 | access_register port capabilities: write option is not supported | |
| BAD_PARAM | 0x60F5CC | access_register MPEIN: write option is not supported | |
| BAD_PARAM | 0x136488 | set_wol_rol: opcode mod must be zero | |
| BAD_OP | 0x745959 | set_wol_rol: command is allowed only for function per port mode | |
| BAD_OP | 0x1A4F91 | set_wol_rol: command is allowed for physical function only | |
| BAD_OP | 0x157659 | set_wol_rol: eth only command | |
| BAD_OP | 0x376559 | set_wol_rol: device don't support wol on the selected function | |
| BAD_OP | 0x261053 | query_wol_rol: command is allowed only in function per port mode | |
| BAD_OP | 0x257659 | query_wol_rol: eth only command | |
| BAD_PARAM | 0x033EEF | access_register pvlc: write operation not supported | |
| BAD_PARAM | 0x792FB4 | reg_access_pvlc: invalid local port. | |
| BAD_PARAM | 0x15C356 | access_register port capabilities: write option is not supported | |
| BAD_PARAM | 0x0B2F6E | access_register PMLP: invalid port | |
| BAD_PARAM | 0x1476BD | Flow control, PFCC, pfc mask not supported (pfctx or pfcrx) when pprx_v or pptx_v are set. | |
| BAD_PARAM | 0x2C6A90 | flow control, PFCC wrong port number | |
| BAD_PARAM | 0x16DBB4 | flow control, PFCC port number is not valid | |
| BAD_PARAM | 0x35ADBC | Bad param for PFCC: get admin not supported | |
| BAD_PARAM | 0x3544EC | Bad param for PFCC: set remote not supported | |
| BAD_PARAM | 0x19EFDC | bad param for PFCC:operation type not supported | |
| BAD_PARAM | 0x1DF56C | Bad param: TSA not definied | |
| BAD_PARAM | 0x15DABC | Bad param for QETCR: get admin not supported | |
| BAD_PARAM | 0xDE13456| bad param for QETCR: remote algorithm not supported | |
| BAD_PARAM | 0xDE1FC5 | bad param for QETCR: set remote algorithm not supported | |
| BAD_PARAM | 0x15DFDC | Bad param for QETCR: operation type not supported | |
| BAD_PARAM | 0x15DFCB | Bad param for QTCT: get admin not supported | |
| BAD_PARAM | 0x15E95B | Bad param for QTCT: remote set not supported | |
| BAD_PARAM | 0x15D45B | Bad param for QTCT: operaton type not supported | |
| BAD_RES_STATE | 0x361418 | query_event_map: cannot write context to output. | |
| BAD_SYS_STATE | 0x7ADFBF | get_dropped_packet_log: packet not captured yet. | |
| BAD_PARAM | 0x5A6AAEF| modify_rmp: Limit water mark is higher then rq/srq size. | |
| BAD_PARAM | 0x5A6FEF | arm_rq: Limit water mark is higher then rq/srq size. | |
| BAD_RES_STATE | 0x584EA8 | set_diagnostics: function is not PortOwner | |
| BAD_PARAM | 0x8E8021 | set_diagnostics: The function has no permmision to set the samples from the buffer | |
| BAD_PARAM | 0x30EA01 | set_diagnostics: num_of_counteres exceeds FW supported perf counters | |
| BAD_INPUT_LEN | 0x9992D9 | set_diagnostics: bad input length | |
| BAD_PARAM | 0xB66144 | set_diagnostics: Total number of samples is exceeds capability | |
| BAD_PARAM | 0x26CF29 | set_diagnostics: log_sample_period smaller than supported | |
| BAD_PARAM | 0x4A9391 | set_diagnostics: clearing counters is only supported in sync(Atomic) mode | |
| BAD_PARAM | 0x8FC6D1 | set_diagnostics: choosing only one mode (single / repetitive) is allowed | |
| BAD_PARAM | 0x6C244E | set_diagnostics: no sampling mode selected (single / repetitive) | |
| BAD_PARAM | 0x18CCDF | set_diagnostics: counter id number is not supported | |
| BAD_PARAM | 0x99E211 | set_diagnostics: no free performance counters for this unit | |
| EXCEED_LIM | 0xCBEB52 | set_diagnostics: failed to allocate perf_counter resource number | |
| BAD_PARAM | 0x49EED0 | query_diagnostics: The function has no permmision to set the samples from the buffer | |
| BAD_PARAM | 0xE855BF | query_diagnostics: first sample index ia not supported | |
| BAD_PARAM | 0x2A7FA7 | query_diagnostics: num of samples is not supported | |
| BAD_RES_STATE | 0x5DE017 | arm_dct_for_key_violation: context is not a DCT | |
| BAD_RES_STATE | 0x44E23B | arm_dct_for_key_violation: event type not mapped | |
| BAD_RESOURCE | 0x28762F | set_burst burst size cannot be changed by VF | |
| BAD_PARAM | 0x064868 | set_burst_size: bad burst_size (0) | |
| BAD_PARAM | 0x3A23EE | set_burst_size: bad burst_size | |
| BAD_PARAM | 0x3621BF | query_hca_vport_context: invalid local_port | |
| BAD_PARAM | 0x78312E | query_hca_vport_context: opcode mod must be zero | |
| BAD_OP | 0x482341 | query_hca_vport_context: ib only command | |
| BAD_OUTPUT_LEN | 0x64FF1A | modify_hca_vport_context bad: output length | |
| BAD_OUTPUT_LEN | 0x4E3D11 | modify_hca_vport_context bad: input length | |
| BAD_PARAM | 0x244467 | modify_hca_vport_context: invalid local_port | |
| BAD_PARAM | 0x145288 | modify_hca_vport_context: opcode mod must be zero | |
| BAD_OP | 0x65D9A7 | modify_hca_vport_context: ib only command | |
| BAD_PARAM | 0x58E6C1 | modify_hca_vport_context: field_select contains read only field. | |
| BAD_SYS_STATE | 0x4CBF2E | modify_hca_vport_context: modify other vports allowed just after pf finish init_hca. | |
| BAD_PARAM | 0x0A0003 | modify_hca_vport_context: port guid cannot be zero. | |
| BAD_PARAM | 0x0A0004 | modify_hca_vport_context: Bad port guid (1) see SPEC: 4.1.1 GID USAGE AND PROPERTIES | |
| BAD_PARAM | 0x437CB5 | modify_hca_vport_context: node guid cannot be zero. | |
| BAD_PARAM | 0x154537 | modify_hca_vport_context: bad vport_state_policy | |
| BAD_PARAM | 0x4EE45E | modify_hca_vport_context: bad cap_mask1_field_select trying to modify RO field. | |
| BAD_PARAM | 0x1717E4 | modify_hca_vport_context: bad cap_mask2_field_select trying to modify RO field. | |
| BAD_PARAM | 0x0E40B0 | query_hca_vport_gid: invalid local_port | |
| BAD_PARAM | 0x4DF8F2 | query_hca_vport_gid: opcode mod must be zero | |
| BAD_OP | 0x158999 | query_hca_vport_gid: ib only command | |
| BAD_OUTPUT_LEN | 0x228592 | query_hca_vport_gid: bad output length gid_index = 0xffff | |
| BAD_PARAM | 0x0FA1F5 | query_hca_vport_gid: cannot read gid_index != 0 before function performed init_hca | |
| BAD_PARAM | 0x3DC148 | query_hca_vport_gid: bad gid_index. Index larger than hca param guid cap | |
| BAD_OUTPUT_LEN | 0x20DE7B | query_hca_vport_gid: bad output length | |
| BAD_PARAM | 0x54E60A | query_hca_vport_pkey: invalid local_port | |
| BAD_PARAM | 0x40FF30 | query_hca_vport_pkey: opcode mod must be zero | |
| BAD_PARAM | 0x0F71B2 | query_hca_vport_pkey: bad pkey_index larger than hca param guid cap | |
| BAD_OUTPUT_LEN | 0x6705A2 | query_hca_vport_pkey: bad output length | |
| BAD_SYS_STATE | 0x368B01 | query_vport_counter: vport is not enabled (INIT_HCA is required) | |
| BAD_PARAM | 0x0C9387 | query_hca_vport_pkey: invalid local_port | |
| BAD_INPUT_LEN | 0x7BA914 | set_driver_version : bad input length | |
| BAD_PARAM | 0x7C25BE | set_driver_version: driver version cannot be set twice | |
| BAD_OP | 0x3446B1 | set_pp_rate_limit: failed to set rate limiter | |
| BAD_PARAM | 0xA20B32 | create_lag: lag is not supported | |
| BAD_PARAM | 0xD1A4F2 | create_lag: lag already enabled | |
| BAD_PARAM | 0x104D28 | create_lag: lag is not supported | |
| BAD_PARAM | 0x2B99BE | create_lag: bad .tx_remap_affinity_1 | |
| BAD_PARAM | 0x732893 | create_lag: bad .tx_remap_affinity_2 | |
| BAD_PARAM | 0x41552F | create_lag: lag already enabled or in progress by other | |
| BAD_PARAM | 0x0D10E5 | modify_lag: only lag master can modify lag | |
| BAD_PARAM | 0x2E73CF | modify_lag: bad field_select | |
| BAD_PARAM | 0xDCF36A | modify_lag: bad .tx_remap_affinity_1 | |
| BAD_PARAM | 0x9F9DF7 | modify_lag: bad .tx_remap_affinity_2 | |
| BAD_OUTPUT_LEN | 0x9C8D49 | query_lag: bad output length | |
| BAD_PARAM | 0x0E662B | destroy_lag: only lag master can destroy lag | |
| BAD_PARAM | 0xE4AC33 | destroy_lag: not all qps/sq with port affinity closed | |
| BAD_SYS_STATE | 0xA5AEE8 | destroy_lag: vport lag was not destroyed | |
| BAD_OP | 0x2546EC | create_vport_lag: op_mod is reserved | |
| BAD_PARAM | 0x3CF315 | create_vport_lag: this command is allowed only by the lag master | |
| BAD_SYS_STATE | 0x7BB321 | create_vport_lag: vport lag already enabled | |
| BAD_OP | 0x218399 | destroy_vport_lag: op_mod is reserved | |
| BAD_PARAM | 0x33CAA1 | destroy_vport_lag: this command is allowed only by the lag master | |
| BAD_SYS_STATE | 0x776AA1 | destroy_vport_lag: vport lag was not enabled | |
| NO_RESOURCES | 0x2AAC7C | there will be no more pages | |
| EXCEED_LIM | 0x23A840 | create_tir: fail to allocate tir number | |
| EXCEED_LIM | 0x291839 | create_tir: fail to allocate tir steering entry | |
| BAD_RESOURCE | 0x2EB6A4 | create/modify_tir: rqt doesn't exist | |
| BAD_RESOURCE | 0x2EB6A5 | create/modify_tir: rq doesn't exist | |
| BAD_RESOURCE | 0x25394B | create_tir: transport_domain doesn't exist | |
| EXCEED_LIM | 0x0E350F | create_tir: fail to allocate tir lb_domain hash buckets | |
| EXCEED_LIM | 0x13C6BA | create_tir: fail to allocate tir lb_domain steering entries according to transport_domain | |
| BAD_PARAM | 0x40378C | modify_tir: currently only 32 bit bitmask is supported | |
| EXCEED_LIM | 0x70B2D7 | modify_tir: fail to allocate tir lb_domain hash buckets | |
| EXCEED_LIM | 0x1BF1DA | modify_tir: fail to allocate tir lb_domain steering entries according to transport_domain | |
| BAD_PARAM | 0x1CB6A4 | modify_tir: rqt doesn't exist | |
| BAD_RES_STATE | 0x29E5B3 | destroy_tir: tirn in use or doesn't exist | |
| EXCEED_LIM | 0x69517D | create_tis: fail to allocate tis number | |
| BAD_RESOURCE | 0x3A7839 | create_tis: transport_domain doesn't exist | |
| BAD_OP | 0xAEB346 | modify_tis: command is valid only for ethernet port | |
| BAD_INPUT_LEN | 0x492E95 | modify_tis: bad input length | |
| BAD_PARAM | 0x374B62 | modify_tis: bad opcode modifier | |
| BAD_PARAM | 0x99970D | modify_tis: bad modify_bitmask | |
| BAD_PARAM | 0xEF6F97 | modify_tis: DEI_CFI bit is not supported in tis.prio | |
| BAD_PARAM | 0x6612AA | modify_tis: lag_tx_port_affinity not suppoerted. | |
| BAD_PARAM | 0x7761D9 | modify_tis: lag_tx_port_affinity supported only for lag master. | |
| BAD_PARAM | 0x7BBA5E | create_tis: bad lag_tx_port_affinity | |
| BAD_RES_STATE | 0x46311B | modify_tis: invalid tis number | |
| BAD_PARAM | 0x4F51BF | modify_tis: strict_affinity cannot have lag_tx_port_affinity | |
| BAD_RES_STATE | 0x6CB988 | destroy_tis: tisn in use or doesn't exist | |
| EXCEED_LIM | 0x79A38E | alloc_encap: fail to allocate encap_id | |
| BAD_INPUT_LEN | 0xB280BC | dealloc_encap: bad input length | |
| BAD_RES_STATE | 0x179E84 | dealloc_encap: encap_id in use or doesn't exist | |
| BAD_PARAM | 0x2F99BB | query_nic_vport_state: bad allowed_list_type | |
| BAD_PARAM | 0x4B24FC | modify_nic_vport_state: RoCE can be disabled only after all RoCE QPs are destroyed | |
| BAD_PARAM | 0x40EA03 | modify_nic_vport_context: min_wqe_inline_mode can be modified only before vport startup | |
| BAD_PARAM | 0x36098E | modify_nic_vport_context: inline mode for any vport must be >= inline mode of e-sw vport group manager | |
| BAD_PARAM | 0x6A2CAA | modify_nic_vport_state: bad allowed_list_type | |
| BAD_PARAM | 0x019C02 | modify_nic_vport_state: bad allowed_list_size | |
| BAD_OP | 0x427417 | query_roce_address: command is valid only for ethernet port | |
| BAD_INDEX | 0x441CA6 | query_roce_address: roce_address_index not valid | |
| EXCEED_LIM | 0x4BF0E8 | create_flow_table: failed to allocate flow_table resource number | |
| BAD_RES_STATE | 0x21F03E | destroy_flow_group: flow_group in use or doesn't exist | |
| EXCEED_LIM | 0x4E9008 | create_flow_group: failed to allocate flow_group resource number | |
| EXCEED_LIM | 0x629511 | create_flow_group: failed to allocate flow_group rx fw resource | |
| EXCEED_LIM | 0x629522 | create_flow_group: failed to allocate flow_group sx fw resource | |
| EXCEED_LIM | 0x629533 | create_flow_group: failed to allocate flow_group vst fw resource | |
| BAD_RES_STATE | 0x21F03B | destroy_flow_group: flow_group doesn't exist | |
| BAD_OP | 0x3F4BF1 | alloc_flow_counter: command is valid only for ethernet port | |
| BAD_OP | 0xF0101D | alloc_flow_counter: op_mod is reserved | |
| EXCEED_LIM | 0x687239 | alloc_flow_counter: failed to allocate flow_counter resource number | |
| BAD_OP | 0x43F4BF1| dealloc_flow_counter: command is valid only for ethernet port | |
| BAD_OP | 0xE35BD3 | dealloc_flow_counter: op_mod is reserved | |
| BAD_RES_STATE | 0x4BC68E | dealloc_flow_counter: flow_counter in use or doesn't exist | |
| BAD_PARAM | 0x342AAE | delete_l2_table_entry: l2 table entry does not exist | |
| BAD_PARAM | 0x244C6D | set_l2_table_entry: l2 table entry already exist | |
| EXCEED_LIM | 0x552D36 | set_l2_table_entry: failed to allocate l2_table_entry resource number | |
| BAD_PARAM | 0x669002 | query_l2_table_entry: l2 table entry does not exist | |
| BAD_PARAM | 0x2031B1 | modify_vport_state: NIC_VPORT - bad vport state. | |
| BAD_PARAM | 0x2936C3 | modify_vport_state: NIC_VPORT - bad vport_number | |
| BAD_PARAM | 0x75CB3D | modify_vport_state: ESW_VPORT - bad vport state. | |
| BAD_PARAM | 0x2936C2 | modify_vport_state: UP_LINK - bad vport_number | |
| BAD_PARAM | 0x16CE03 | modify_vport_state: UP_LINK - bad vport state | |
| BAD_PARAM | 0x83B703 | modify_vport_state: bad op_mod | |
| BAD_OP | 0x379DB1 | query_vport_state: command is valid only for ethernet port | |
| BAD_PARAM | 0x1B70BB | query_vport_state: bad op mod | |
| BAD_PARAM | 0x519657 | create/modify_rqt: rqn doesn't exist or rqs have not uniform type | |
| BAD_OP | 0x0A33C0 | create_rqt: command is valid only for ethernet port | |
| EXCEED_LIM | 0x5DAF94 | create_rqt: fail to allocate fw_rqt_data number | |
| EXCEED_LIM | 0x1C4BBA | create_rqt: fail to allocate fw rqt data number | |
| EXCEED_LIM | 0x25E793 | create_rqt: fail to allocate rqt HW DATA ctx number | |
| BAD_RESOURCE | 0x638B5F | create_rqt: rqtn is not valid | |
| EXCEED_LIM | 0x1C4BBB | create_rqt: fail to allocate fw rqt data number | |
| BAD_RES_STATE | 0x0BC68E | destroy_rqt: rqt in use or doesn't exist | |
| BAD_RES_STATE | 0x2E49BD | query_rqt: rqt in use or doesn't exist | |
| EXCEED_LIM | 0x5D5F94 | create_rq: failed to allocate resource number | |
| EXCEED_LIM | 0x5A7935 | create_rq: failed to allocate qp resource number | |
| BAD_PARAM | 0x2BF8B6 | create_rq: input_mailbox was illegally modified during process | |
| BAD_RESOURCE | 0x2BF8A6 | create_rq: cqn doesn't exist | |
| BAD_INPUT_LEN | 0x2F50CB | create_rq: not enough pas supplied to support buffer size | |
| EXCEED_LIM | 0x76E357 | create_rq: failed to allocate mtt | |
| BAD_PARAM | 0x5C129A | modify_rq: Limit water mark is higher then rq/srq size. | |
| BAD_PARAM | 0x4A5E49 | modify_rq: Limit water mark is higher then rq/srq size. | |
| EXCEED_LIM | 0x57CF9D | create_sq: failed to allocate resource_number number | |
| BAD_RESOURCE | 0x4FDE71 | create_sq: s_cqn doesn't exist | |
| BAD_RESOURCE | 0x65B501 | create_sq: maximum number of supported qps exceeded | |
| BAD_RESOURCE | 0x2AE300 | create_sq command: tis number doesn't exist or exceed limit | |
| BAD_INPUT_LEN | 0x2F40CA | create_sq: not enough pas supplied to support buffer size | |
| EXCEED_LIM | 0x6CC43E | create_sq: failed to allocate mtt | |
| BAD_RES_STATE | 0x52B76F | destroy_sq: sqn is not valid or in use | |
| BAD_RES_STATE | 0x50B76F | destroy_rq: rqn is not valid or in use | |
| EXCEED_LIM | 0x2B1A55 | add_vxlan_udp_dport: no free vxlan_udp_port field | |
| BAD_PARAM | 0x3AD80C | delete_vxlan_udp_dport: vxlan_udp_port doesn't exist in gvmi | |
| BAD_PARAM | 0x74D092 | delete_vxlan_udp_dport: vxlan_udp_port doesn't exist in device | |
| BAD_OP | 0x08552F | alloc_transport_domain: bad op_mod | |
| BAD_PARAM | 0x6CEF2E | alloc_transport_domain: transport_domain commands are not supported for port type ib | |
| EXCEED_LIM | 0x095C93 | alloc_transport_domain: failed to allocate transport_domain resource number | |
| BAD_OP | 0x76358C | dealloc_transport_domain: bad op_mod | |
| BAD_PARAM | 0x86358C | dealloc_transport_domain: transport domain 0 is invalid | |
| BAD_RES_STATE | 0x50E692 | dealloc_transport_domain: transport_domain number in use or doesn't exist | |
| INTERNAL_ERR | 0x1CD2D5 | modify_cong_status: cannot read context from input. | |
| INTERNAL_ERR | 0x56BD42 | query_cong_params:cannot write context to output. | |
| INTERNAL_ERR | 0x55B1FD | query_cong_params:cannot write context to output. | |
| INTERNAL_ERR | 0x3C506F | query_cong_counter:cannot write context to output. | |
| BAD_PARAM | 0x68C713 | destroy_qp/dct: bad opcode modifier | |
| BAD_INDEX | 0x398B0A | create_qp: failed to allocate resource_number number as requested number already allocated | |
| EXCEED_LIM | 0x19C6D6 | create_qp: failed to allocate resource_number number (most likely out of resources) | |
| BAD_RESOURCE | 0x2BF8A5 | create_qp: r_cqn doesn't exist | |
| BAD_RESOURCE | 0x4FDF71 | create_qp: s_cqn doesn't exist | |
| BAD_RESOURCE | 0x4A5F02 | qp command: srq number doesn't exist | |
| BAD_RESOURCE | 0x65B500 | qp command: maximum number of supported qps exceeded | |
| BAD_INPUT_LEN | 0x2F50CA | create qp: not enough pas supplied to support buffer size | |
| EXCEED_LIM | 0x0BB3C2 | create_qp: failed to allocate mtt | |
| EXCEED_LIM | 0x42A324 | create_dct: fail to allocate dct number | |
| BAD_RESOURCE | 0x4CAF16 | create_dct: cq number doesn't exist | |
| BAD_RESOURCE | 0x3B2998 | create_dct: srq number doesn't exist | |
| BAD_PARAM | 0x41E870 | create_dct: dct.pd doesn't match srq.pd | |
| BAD_PARAM | 0x2B6D28 | create_dct: dct.rlky doesn't match srq.rlky | |
| BAD_INPUT_LEN | 0x25AC2E | init2init_qp: bad input length | |
| BAD_PARAM | 0x4BCF21 | init2init_qp: bad opcode modifier | |
| BAD_PARAM | 0x795921 | init2init_qp: opt_param_mask != 0 | |
| BAD_RES_STATE | 0x4287C3 | init2init_qp: invalid qp number. | |
| BAD_QP_STATE | 0x0C7C8B | init2init_qp: qp is not in init state | |
| BAD_INPUT_LEN | 0x7E7621 | init2rtr_qp: bad input length | |
| BAD_PARAM | 0x0A88A8 | init2rtr_qp: bad opcode modifier | |
| BAD_PARAM | 0x7016B9 | init2rtr_qp: bad opt_param_mask | |
| BAD_RES_STATE | 0x5F34F6 | init2rtr_qp: invalid qp number. | |
| BAD_QP_STATE | 0x5D668C | init2rtr_qp: qp is not in init state | |
| BAD_RESOURCE | 0x31A762 | special_qp: cannot attach special QP, already attached | |
| BAD_INPUT_LEN | 0x619154 | rtr2rts_qp: bad input length | |
| BAD_PARAM | 0x6CBD32 | rtr2rts_qp: bad opcode modifier | |
| BAD_PARAM | 0x07EC2C | rtr2rts_qp: bad opt_param_mask | |
| BAD_RES_STATE | 0x4796B7 | rtr2rts_qp: invalid qp number. | |
| BAD_QP_STATE | 0x429D76 | rtr2rts_qp: qp is not in rtr state | |
| BAD_PARAM | 0x380F88 | rts2rts_qp: bad opcode modifier | |
| BAD_PARAM | 0x498C8B | rts2rts_qp: bad opt_param_mask | |
| BAD_PARAM | 0x1B5A69 | rts2rts_qp: change srqn is not supported in ISSI > 0. | |
| BAD_INPUT_LEN | 0x330661 | rts2rts_qp: bad input length | |
| BAD_RESOURCE | 0x2BF8A4 | rts2rts: r_cqn doesn't exist | |
| BAD_RESOURCE | 0x7C839F | rts2rts_qp: srq number doesn't exist | |
| BAD_RES_STATE | 0x0F4AF3 | rts2rts_qp: maibox was changed durring the command. | |
| BAD_RES_STATE | 0x040841 | rts2rts_qp: maibox was changed durring the command. | |
| BAD_RES_STATE | 0x71C9E5 | rts2rts_qp: maibox was changed durring the command. | |
| BAD_RES_STATE | 0x08FD58 | rts2rts_qp: maibox was changed durring the command. | |
| BAD_PARAM | 0x1B436A | rts2rts_qp: new src_addr_index illegal | |
| BAD_PARAM | 0x1BCDE4 | rts2rts_qp: attempting to change eth_prio in ib port | |
| BAD_RES_STATE | 0x56C36B | rts2rts_qp: invalid qp number. | |
| BAD_QP_STATE | 0x0FC39F | rts2rts_qp: qp is not in RTS state. | |
| BAD_RES_STATE | 0x4B4555 | rts2rts: eq buffer is full. | |
| BAD_PARAM | 0x3F7B1C | 2error_qp/2reset/drain_dct: bad opcode modifier | |
| BAD_RES_STATE | 0x7EA02D | 2error_qp/2reset/drain_dct: invalid qp/dct number. | |
| BAD_INPUT_LEN | 0x42ED7C | sqerr2rts_qp/sqd2rts_qp: bad input length | |
| BAD_PARAM | 0x1E674D | sqerr2rts_qp/sqd2rts_qp: bad opcode modifier | |
| BAD_PARAM | 0x566AD3 | sqerr2rts_qp: bad opt_param_mask | |
| BAD_PARAM | 0x0E5F93 | sqd2rts_qp: bad opt_param_mask | |
| BAD_RES_STATE | 0x29653C | sqerr2rts_qp/sqd2rts_qp: invalid qp number. | |
| BAD_QP_STATE | 0x0E3608 | sqerr2rts_qp: qp is not in sqerr state | |
| BAD_QP_STATE | 0x3DD302 | sqd2rts_qp: qp is not in sqd state | |
| BAD_PARAM | 0x31ED04 | create_flow_table: level0 ft for this table_type is already exist | |
| NO_RESOURCES | 0x401239 | eth global steering table alloc fail 1 | |
| NO_RESOURCES | 0x71C1EB | eth global steering table alloc fail 2 | |
| NO_RESOURCES | 0x42EBCA | eth global steering table alloc fail 3 | |
| NO_RESOURCES | 0x201239 | eth global steering table alloc fail 4 | |
| NO_RESOURCES | 0x21C1EB | eth global steering table alloc fail 5 | |
| NO_RESOURCES | 0x22EBCA | eth global steering table alloc fail 6 | |
| NO_RESOURCES | 0x290D05 | eth global steering table alloc fail 7 | |
| NO_RESOURCES | 0x79C639 | eth global steering table alloc fail 8 | |
| NO_RESOURCES | 0x21435E | eth global steering table alloc fail 9 | |
| NO_RESOURCES | 0x3541E6 | eth global steering table alloc fail 10 | |
| NO_RESOURCES | 0x0AFFAE | eth global steering table alloc fail 11 | |
| NO_RESOURCES | 0x2FE7D9 | eth global steering table alloc fail 12 | |
| NO_RESOURCES | 0x2039BE | eth global steering table alloc fail 13 | |
| NO_RESOURCES | 0x53B84F | eth global steering table alloc fail 14 | |
| NO_RESOURCES | 0x23A0E6 | eth global steering table alloc fail 15 | |
| NO_RESOURCES | 0x79E69E | eth global steering table alloc fail 16 | |
| NO_RESOURCES | 0x6584C2 | eth global steering table alloc fail 17 | |
| NO_RESOURCES | 0x83B84F | eth global steering table alloc fail 18 | |
| NO_RESOURCES | 0x93B84F | eth global steering table alloc fail 19 | |
| NO_RESOURCES | 0x4CF024 | eth gvmi steering table alloc fail 1 | |
| NO_RESOURCES | 0x5CF024 | eth gvmi steering table alloc fail 2 | |
| NO_RESOURCES | 0x6CF024 | eth gvmi steering table alloc fail 3 | |
| NO_RESOURCES | 0x0AC92B | eth gvmi steering table alloc fail 5 | |
| NO_RESOURCES | 0x58900D | eth gvmi steering table alloc fail 6 | |
| NO_RESOURCES | 0x0B0CFD | eth gvmi steering table alloc fail 7 | |
| NO_RESOURCES | 0x33EA94 | eth gvmi steering table alloc fail 8 | |
| NO_RESOURCES | 0x1AC92B | eth gvmi steering table alloc fail 9 | |
| NO_RESOURCES | 0x18900D | eth gvmi steering table alloc fail 10 | |
| NO_RESOURCES | 0x1B0CFD | eth gvmi steering table alloc fail 11 | |
| NO_RESOURCES | 0x13EA94 | eth gvmi steering table alloc fail 12 | |
| BAD_PARAM | 0x1C2B78 | ft_test_and_update: invalid table_id | |
| BAD_PARAM | 0x66CBBB | ft_test_and_update: table_id doesn't match table_type | |
| BAD_PARAM | 0x66CDDD | ft_test_and_update: table_id doesn't exist for this vport_num | |
| BAD_PARAM | 0x66D6C3 | destroy_flow_table: flow table still has attached groups | |
| BAD_PARAM | 0x389E56 | destroy_flow_table: flow table still pointed by some flows | |
| EXCEED_LIM | 0x0A1020 | create_flow_group: groups_member_count > table_size | |
| BAD_RESOURCE | 0x3D1541 | set_flow_table_entry: tir doesn't exist; | |
| EXCEED_LIM | 0x5D1541 | set_flow_table_entry: tir ref_count exceed limit | |
| BAD_PARAM | 0x6D1541 | set_flow_table_entry: tir already pointed by some flow table with different table type | |
| BAD_PARAM | 0x3178F5 | flow_group: flow_group doesn't exist (no such group_id for this table_id) | |
| BAD_PARAM | 0x6D0ED4 | flow_group: flow_group doesn't exist (no such group_id for this table_type) | |
| BAD_PARAM | 0x0F4A91 | set_flow_table_entry: flow_index < group start_flow_index | |
| BAD_PARAM | 0x1DC7A3 | set_flow_table_entry: flow_index > group end_flow_index | |
| BAD_PARAM | 0x3AD328 | set_flow_table_entry: rule include unmatched bits (group_match_criteria == 0, but fte_match_value == 1) | |
| BAD_PARAM | 0x6588BF | set_flow_table_entry: source_sqn match can't be took together with external source_port match | |
| BAD_PARAM | 0x78D8FE | set_flow_table_entry: an FTE with flow counter in FDB must has fully match on source_vport | |
| BAD_PARAM | 0x29CDBA | set_flow_table_entry: an FTE with flow counter in FDB must has fully match on dmac | |
| BAD_PARAM | 0x6E6D2A | set_flow_table_entry: an FTE with flow counter in FDB must has fully match on dmac | |
| BAD_PARAM | 0x66010E | create_flow_group: invalid match_criteria_enable | |
| BAD_PARAM | 0x7E1579 | create_flow_group: outer_headers valid bit isn't set, but headers are not reseved | |
| BAD_PARAM | 0x7E1580 | create_flow_group: outer_headers valid bit is set, but headers are zero | |
| BAD_PARAM | 0x0D37F4 | create_flow_group: misc_parameters valid bit isn't set, but headers are not reseved | |
| BAD_PARAM | 0x0D37F5 | create_flow_group: misc_parameters valid bit is set, but headers are zero | |
| BAD_PARAM | 0x17FAA8 | create_flow_group: inner_headers valid bit isn't set, but headers are not reseved | |
| BAD_PARAM | 0x17FAA9 | create_flow_group: inner_headers valid bit is set, but headers are not zero | |
| INTERNAL_ERR | 0x0FC8F3 | create_flow_group: unexpected invalid group in list | |
| BAD_PARAM | 0x190DBD | create_flow_group: groups overlapping | |
| BAD_PARAM | 0x7252AD | create_flow_group: groups overlapping | |
| BAD_PARAM | 0x4FF308 | create_flow_group: group exceed flow table size | |
| BAD_PARAM | 0x6AE84C | flow_table: destination table is in illegal level | |
| BAD_PARAM | 0x6AE95D | flow_table: dest_list_size > 1, but dest_ft_level < 64 | |
| BAD_PARAM | 0x6AEA6E | flow_table: dest_list_size > 1, but src_ft_level >= 64 | |
| BAD_PARAM | 0x44090E | set_flow_table_entry: invalid vport number | |
| BAD_PARAM | 0x30B3AF | set_flow_table_entry: flow_counter_id is reserved | |
| BAD_RES_STATE | 0x03DDBF | set_flow_table_entry: flow_counter doesn't exist | |
| BAD_PARAM | 0x2B6490 | set_flow_table_entry: flow_table_type doesn't fit the flow_counter table type | |
| BAD_PARAM | 0x5399D7 | set_flow_table_entry: source_port match doesn't fit the flow_counter source_port | |
| BAD_PARAM | 0x734E02 | set_flow_table_entry: dmac match doesn't fit the flow_counter mac | |
| BAD_PARAM | 0x3B6490 | set_flow_table_entry: flow_table_type doesn't fit the flow_counter table type | |
| BAD_PARAM | 0x4C4A4A | set_flow_table_entry: destination list must be comprised of destinations of the same type | |
| BAD_PARAM | 0x22A5AF | set_flow_table_entry: dest_type == VPORT is valid only for table_type == ESW_FDB | |
| BAD_PARAM | 0x142AD1 | set_flow_table_entry: multiple processing paths of flow tables is supported only for table_type == NIC_RX | |
| BAD_PARAM | 0x002C63 | set_flow_table_entry: dest_type == TIR is valid only for NIC RX and sniffer flow tables | |
| BAD_PARAM | 0x06DBB6 | set_flow_table_entry: multiple TIR destinations allowed only for NIC RX Flow Table | |
| BAD_PARAM | 0x7AEA6E | set_flow_table_entry: TIRs dest_list_size > 1, but src_ft_level >= 64 | |
| BAD_PARAM | 0x27DBA7 | set_flow_table_entry: invalid flow destination type | |
| BAD_PARAM | 0x7BC3C1 | set_flow_table_entry: external port is duplicated in the FTE destination list | |
| BAD_PARAM | 0x7BC3C0 | set_flow_table_entry: FW currently doesn't support flow counters together with flow_tag | |
| BAD_PARAM | 0x7CD55A | set_flow_table_entry: an FTE with flow counter in FDB must has dest_type == VPORT | |
| BAD_RES_STATE | 0x2036ED | set_flow_table_entry: flow_group doesn't exist, or exceed limit | |
| BAD_RES_STATE | 0xD29096 | set_flow_table_entry: only encap to wire action is currently supported | |
| BAD_RES_STATE | 0x54B97C | set_flow_table_entry: encap_id doesn't exist | |
| BAD_RES_STATE | 0x247AAB | dmfs_modify_flow_table_entry: encap_id doesn't exist | |
| EXCEED_LIM | 0x5369F3 | dmfs_icm_alloc: icm allocation failed | |
| BAD_PARAM | 0x1CC302 | create_flow_group: DIP/SIP header is set , but ethertype isn't fully set | |
| BAD_PARAM | 0x3F5A6F | create_flow_group: UDP and TCP headers are mutual exclusive | |
| BAD_PARAM | 0x23A6BF | create_flow_group: source_port match is not allwoed for this table type | |
| BAD_PARAM | 0x45A7BF | create_flow_group: source_port can not be partial matched | |
| BAD_PARAM | 0x22204C | create_flow_group: source_sqn match is not allwoed for this table type | |
| BAD_PARAM | 0x09F12D | create_flow_group: source_sqn can not be partial matched | |
| BAD_PARAM | 0x731716 | create_flow_table_group: FW currently doesn't support second vlan headers | |
| BAD_PARAM | 0x4F0146 | set_flow_table_entry: IP version is IPv4, but dst_ip_127_32 isn't reserved | |
| BAD_PARAM | 0x4C0856 | set_flow_table_entry: IP version is IPv4, but src_ip_127_32 isn't reserved | |
| BAD_PARAM | 0x6013FA | set_flow_table_entry: invalid IP version ethertype | |
| BAD_PARAM | 0x40D2AA | set_flow_table_entry: cvlan_tag and svlan_tag are mutual exclusive | |
| BAD_PARAM | 0x6742F8 | set_flow_table_entry: outer_second_cvlan_tag and outer_second_svlan_tag are mutual exclusive | |
| BAD_PARAM | 0x06F490 | set_flow_table_entry: inner_second_cvlan_tag and inner_second_svlan_tag are mutual exclusive | |
| BAD_PARAM | 0x0EF281 | isr_perf_counters: The gvmi is not active | |
| BAD_PARAM | 0x0CCF50 | PTYS: width 1X bit can't be cleared | |
| BAD_PARAM | 0x166B61 | PTYS: Trying to set ib_proto_admin to a speed which is not supported. | |
| BAD_PARAM | 0x103B92 | PTYS_write: Trying to set eth_proto_admin to a speed which is not supported. | |
| BAD_PARAM | 0xBD59A0 | PTYS_write: wrong use of autonego disable, only single speed allowed when auto-neg is disabled | |
| BAD_PARAM | 0x3123FD | bad PAS - reserved not zero (just for mtts. 0xfff) | |
| BAD_PARAM | 0x3123FE | bad PAS - reserved not zero (just for mtts. 0xfff) | |
| BAD_PARAM | 0x2BE9CB | get_icm_resource_attributes: unsupported counter id | |
| BAD_RES_STATE | 0x6DA775 | manage_pages: bad hca state (enable hca is needed). | |
| BAD_RES_STATE | 0x658908 | enable_hca: initializing | |
| BAD_RES_STATE | 0x747414 | enable_hca: HOST0 driver must be loaded first. | |
| BAD_RES_STATE | 0x083FCD | enable_hca: driver (hypervisor) refuesed to give pages. | |
| BAD_RES_STATE | 0x2F4115 | enable_hca: PF event eq hasn't been set. | |
| BAD_RES_STATE | 0x1B2028 | enable_hca: PF eq error. | |
| BAD_RES_STATE | 0x511EFC | enable_hca: HCA already enabled. | |
| BAD_RES_STATE | 0x54442A | disable_hca: PF event eq hasn't been mapped or fatal EQ problem | |
| BAD_RES_STATE | 0x54667C | disable_hca: PF event eq hasn't been mapped or fatal EQ problem | |
| BAD_RES_STATE | 0x70227F | disable hca: bad hca state. | |
| BAD_RES_STATE | 0xA38764 | query_pages: bad op_mod, boot pages is required. | |
| BAD_PARAM | 0x7EEC68 | query_pages: bad op_mod | |
| BAD_OUTPUT_LEN | 0x4D99EF | query_issi: bad output length | |
| BAD_PARAM | 0x7A7D3C | set issi: bad issi - not supported | |
| BAD_PARAM | 0x2EDABC | set issi: bad issi - not supported | |
| BAD_PARAM | 0x20BA9B | set issi: issi can be set just after enable hca. | |
| BAD_RES_STATE | 0x7F88B6 | enable_hca cannot access other functions before init hca | |
| BAD_RES_STATE | 0x7E89B1 | disable_hca cannot access other functions before init hca | |
| BAD_RES_STATE | 0x59A763 | query_pages: hca is not enabled | |
| BAD_PARAM | 0x5468FA | manage_pages: pages are not required | |
| BAD_SYS_STATE | 0x2B69B6 | bad opcode (not supported before init hca) | |
| BAD_SYS_STATE | 0x408B33 | bad opcode + hca state (HCA disabled or did not get all required pages) | |
| NO_RESOURCES | 0x632A50 | init_hca: icm context initialization error (reserved_contexts) | |
| NO_RESOURCES | 0x28E7D8 | init_hca: icm context initialization error (dc) | |
| NO_RESOURCES | 0x7B7A29 | init_hca called without enough pages to complete operation | |
| NO_RESOURCES | 0x5B3CF2 | init_hca called without enough pages to complete operation | |
| BAD_SYS_STATE | 0x133D1B | init_hca: gvmi already initialized | |
| BAD_RES_STATE | 0x448829 | teardown_hca: not all dcts are closed | |
| BAD_SYS_STATE | 0x398A88 | gvmi not active | |
| NO_RESOURCES | 0x4F8492 | global steering table alloc fail 1 | |
| NO_RESOURCES | 0x5F8492 | global steering table alloc fail 2 | |
| NO_RESOURCES | 0x4C37AC | ib global steering table alloc fail 3 | |
| NO_RESOURCES | 0x3EFDDC | ib global steering table alloc fail 4 | |
| NO_RESOURCES | 0x4BFE48 | ib global steering table alloc fail 5 | |
| NO_RESOURCES | 0x6CDFC0 | ib gvmi steering table alloc fail 1 | |
| NO_RESOURCES | 0x314248 | ib gvmi steering table alloc fail 2 | |
| NO_RESOURCES | 0x498A88 | ib gvmi steering table alloc fail 3 | |
| BAD_RES_STATE | 0x42D2BF | attach_to_mcg: qp already exists in mcg | |
| EXCEED_LIM | 0x44D596 | attach_to_mcg: mcg already has maximum qps | |
| BAD_RES_STATE | 0x53EC1C | detach_from_mcg: mcg doesn't exist | |
| BAD_RES_STATE | 0x756DB1 | detach_from_mcg: mcg doesn't exist in this gvmi | |
| BAD_RES_STATE | 0x580CF2 | detach_from_mcg: qp doesn't exist in mcg | |
| EXCEED_LIM | 0x6466E3 | attach_detach_from_mcg: steering icm entries exhausted | |
| EXCEED_LIM | 0x7466E3 | attach_detach_from_mcg: steering icm entries exhausted | |
| BAD_OP | 0x2FB682 | sniffer: only port_pf_gvmi can use sniffer | |
| BAD_RES_STATE | 0x1FB682 | sniffer: attach while attached | |
| BAD_RES_STATE | 0x7E8862 | sniffer: detach while not attached | |
| BAD_RESOURCE | 0x15A3C9 | qp command: can not open RoCE QP if vport roce_en == 0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Sorry, don't have any updates.