CollotsSpot

type: custom:button-card
name: Living Room
icon: mdi:sofa
tap_action:
  action: navigate
  navigation_path: '#livingroom'
entity: sensor.living_room_temp_and_hum
custom_fields:
  btn:
    card:

conlank

Major credit for this document goes to LoganFraiser. I simply built off his documentation and sources in an attempt to help make it a little more user friendly.

If you are have suggestions, problems, comments leave them below or get in touch with me (Toynbee) on discord.

So you want to set up AutoZ with your new Klicky Probe?

Klicky

First things first:

Does your Klicky work? And I don't just mean that the probe correctly detects Open or Closed when you push the switch with your finger (although it better do that as well). Does it dock and undock automatically? Did you install the Klicky macros and customize the variables? Have you tried your Print_Start macro to make sure that it works, and works MORE THAN ONCE?

flaviut

These instructions have moved to https://github.com/emporia-vue-local/esphome

nickpegg

# File location: /etc/udev/rules.d/90-libvirt-usb.rules
ACTION=="bind", \
	SUBSYSTEM=="usb", \
	ENV{ID_VENDOR_ID}=="6b62", \
	ENV{ID_MODEL_ID}=="6869", \
	RUN+="/usr/local/bin/kvm-udev attach <domain>"
ACTION=="remove", \
	SUBSYSTEM=="usb", \
	ENV{ID_VENDOR_ID}=="6b62", \
	ENV{ID_MODEL_ID}=="6869", \

yutao8

Email: [email protected]
SN: GAWAE-FCWQ3-P8NYB-C7GF7-NEDRT-Q5DTB-MFZG6-6NEQC-CRMUD-8MZ2K-66SRB-SU8EW-EDLZ9-TGH3S-8SGA