T22p Console

t22p.cap

  CurrentThreadId:450, TaskOfQueue:450
�������������������������������������������������������������������������������?����_�����������������K�yD�f�&,5��r�$c#�$dF�`"
 
Basic POST completed...     Success.
Last reset cause: Hardware reset (Power-on reset)

PSPBoot1.4 rev: 1.4.2.6
BootLoader Version : T22-2.0.0.1 (Jul 22 2013,22:52:41)

(c) Copyright 2001-2008 Xiamen Yealink Network Technology Co.,Ltd 
All Rights Reserved.

Press ESC for monitor... 3321

(psbl) 

Booting...
Launching kernel decompressor.
Starting LZMA Uncompression Algorithm.
Compressed file is LZMA format.
Kernel decompressor was successful ... launching kernel.

LINUX started...
Config serial console: console=ttyS0,57600n8r
Linux version 2.6.10n (root@hubery-vm) (gcc version 3.4.3) #15 Thu Dec 12 08:14:00 CST 2013
Calling add_memory_region base=0x0, size=335544320, type=3i
Calling add_memory_region base=0x14000000, size=4096, type=3i
Calling add_memory_region base=0x14001000, size=126976, type=3i
Calling add_memory_region base=0x14020000, size=3846144, type=3i
Calling add_memory_region base=0x143cb000, size=29577216, type=1i
CPU revision is: 00018448
TNETV1050 Communication Processor detected
Determined physical RAM map:
 memory: 143cb000 @ 00000000 (reserved)
 memory: 01c35000 @ 143cb000 (usable)
Built 1 zonelists
Kernel command line:  console=ttyS0,57600n8r
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB, 4-way, linesize 16 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 256 (order: 8, 4096 bytes)
CPU frequency 162.50 MHz
Using 81.250 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Freeing Bootloader reserved memory [0x140c0000,0xfffff000]
Memory: 28544k/32768k available (2434k kernel code, 4208k reserved, 411k data, 128k init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...  available.
spawn_desched_task(00000000)
desched cpu_callback 3/00000000
ksoftirqd started up.
softirq RT prio: 24.
desched cpu_callback 2/00000000
desched thread 0 started up.
TI Optimizations: Allocating TI-Cached Memory Pool.
Warning: Number of buffers is not configured. Setting default to 512
Using 512 Buffers for TI-Cached Memory Pool.
NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
NET: Registered protocol family 16
Can't analyze prologue code at 9431e9b0
TC classifier action (bugs to [email protected] cc [email protected])
Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
�ttyS0 at  (irq = 15) is a 16550A
io scheduler noop registered
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
elevator: using noop as default io scheduler
avalanche flash device: 0x800000 at 0x10000000.
Primary flash device: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Looking for mtd device :mtd0:
Found a mtd0 image (0x30000), with size (0x140000).
Creating 1 MTD partitions on "Primary flash device":
0x00030000-0x00170000 : "mtd0"
Looking for mtd device :mtd1:
Found a mtd1 image (0x170000), with size (0x100000).
Creating 1 MTD partitions on "Primary flash device":
0x00170000-0x00270000 : "mtd1"
Looking for mtd device :mtd2:
Found a mtd2 image (0x0), with size (0x20000).
Creating 1 MTD partitions on "Primary flash device":
0x00000000-0x00020000 : "mtd2"
Looking for mtd device :mtd3:
Found a mtd3 image (0x20000), with size (0x10000).
Creating 1 MTD partitions on "Primary flash device":
0x00020000-0x00030000 : "mtd3"
Looking for mtd device :mtd4:
Found a mtd4 image (0x270000), with size (0x80000).
Creating 1 MTD partitions on "Primary flash device":
0x00270000-0x002f0000 : "mtd4"
Looking for mtd device :mtd5:
Found a mtd5 image (0x2f0000), with size (0x20000).
Creating 1 MTD partitions on "Primary flash device":
0x002f0000-0x00310000 : "mtd5"
Looking for mtd device :mtd6:
Found a mtd6 image (0x310000), with size (0x4f0000).
Creating 1 MTD partitions on "Primary flash device":
0x00310000-0x00800000 : "mtd6"
Looking for mtd device :mtd7:
Found a mtd7 image (0x0), with size (0x800000).
Creating 1 MTD partitions on "Primary flash device":
0x00000000-0x00800000 : "mtd7"
GACT probability on
Mirror/redirect action on
u32 classifier
    Perfomance counters on
    input device check on 
    Actions configured 
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (256 buckets, 2048 max) - 344 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear 
All bugs added by David S. Miller 
Disabled Privacy Extensions on device 943622e0(lo)
IP-Config: No network devices available.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 128k freed
init started: BusyBox v1.10.3 (2013-08-06 13:53:41 CST)
Algorithmics/MIPS FPU Emulator v1.5
avalanche_lcd: module license 'Texas Instruments' taints kernel.
LCD Drv Version : T22-1.0.0.28 Build at Jul 22 2013 19:41:37
read from ht hdversion = 0x53d
HWRevision:5.0.0.61 
KEYPAD Drv Version : 1.0.0.3
msgkit Init:1.0.0.6, Build at Sep  5 2013,11:17:46.
---------------------------------------
Setting hostname as YEALINK_SIPT28_IPPHONE 
---------------------------------------

Please press Enter to activate this console. [Create /tmp/xml_WRLockFile success]
first_child:configMap
ESW Init:2.0.3.3-T2X, Build at Feb 14 2014,16:09:53.
into power ctrl state!
configServer version = 1.0.0.3 build at Dec  9 2014 20:19:35
---------------------------------------
starting rtServer app...
---------------------------------------
---------------------------------------
Starting the syslogd server
---------------------------------------
/sbin/syslogd -S -O /tmp/Messages -s 200 -b1
ANY <0+emerg > netServer log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
ANY <0+emerg > ANY =0
ANY <0+emerg > Version  :5.1.0.9 for release
ANY <0+emerg > Built-at :Sep 19 2014,17:39:30
[warning:xml_parser]xml_node_first_child:node is empty!

802.1X Authentication Disable. Quit .............! 
 Failed to read or parse configuration '/yealink/config/Network/Network.cfg'.
CurrentThreadId:0, TaskOfQueue:276
DANY<0+emerg > LIBD log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
DANY<0+emerg > DANY=0
the command is failed
DANY<0+emerg > LIBD log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
DANY<0+emerg > DANY=3
/yealink/config/certs/phonedev/WebServer.pem: 
exit power ctrl state!
file open error:: No such file or directory
udhcpc (v1.10.3) started
killall: snmpd: no process killed
Trying /yealink/config/Network/Network.cfg
custom opt: 132
custom opt: 133
Trying config/Setting/autop.cfg
custom opt: 120
custom opt: 51
Trying factory/Setting/autop.cfg
file open error:: No such file or directory
Sending discover...
Terminated
---------------------------------------
killall: cannot kill pid 277: No such process
killall: cannot kill pid 280: No such process
killall: cannot kill pid 281: No such process
killall: cannot kill pid 282: No such process
killall: cannot kill pid 283: No such process
killall: cannot kill pid 284: No such process
killall: cannot kill pid 285: No such process
---------------------------------------
copy admin passwd from /yealink/config/.htpasswd to /tmp/.htpasswd
---------------------------------------
starting Screen app...
starting VPM...
---------------------------------------
---------------------------------------
---------------------------------------
Syslink Init:2.0.0.0-[Titian/Aries], Build at Apr 16 2012,10:21:31.
---------------------------------------
Starting the mini_httpd server
---------------------------------------
Syslink Init:DONE
killall: lighttpd: no process killed
killall: fcgiServer.exx: no process killed
type:
http port: 80
https port: 443
http port open
https port open
running http port: 80
running https port: 443
/yealink/scripts/yealink.sh: line 25: /yealink/bin/pcap.exx: not found
---------------------------------------
starting tel app...
[0407] 00077541 AutoServer Register Thread!
ANY <0+emerg > autoServer log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
ANY <0+emerg > ANY =0
ANY <0+emerg > Version  :5.0.0.39 for release
ANY <0+emerg > Built-at :Feb 13 2015,17:32:20
---------------------------------------
number of factory&config file is 16
[0421] 00078878 sipserver start
2024-09-10 00:00:59: (network.c.184) port: 80 
2024-09-10 00:00:59: (network.c.254) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes 
2024-09-10 00:00:59: (network.c.184) port: 443 
2024-09-10 00:00:59: (network.c.254) warning: please use server.use-ipv6 only for hostnames, not without server.bind / empty address; your config will break if the kernel default for IPV6_V6ONLY changes 
---------------------------------------
Estimating the telnet enable or not
---------------------------------------
default value is 0
0
disable telnet server
starting TR069 app...
killall: tr69_client: no process killed
DANY<0+emerg > LIBD log :sys=1,cons=1,time=0,E=3,W=4,N=5,I=6,D=7
DANY<0+emerg > DANY=0
[IPPAGING-DEBUG]:ippaging->loop_send_port = 65000

[IPPAGING-DEBUG]:ippaging->loop_recv_port = 65001

[IPPAGING-DEBUG]:set socket to fdr: 12
[IPPAGING-DEBUG]:ippaging->max_fd = 12

[IPPAGING-DEBUG]:recv_thread begin...

[IPPAGING-DEBUG]:set socket to fdr: 12
[IPPAGING-DEBUG]:ippaging->max_fd = 12

CurrentThreadId:0, TaskOfQueue:450
CurrentThreadId:450, TaskOfQueue:450