wojteklu

Code is clean if it can be understood easily – by everyone on the team. Clean code can be read and enhanced by a developer other than its original author. With understandability comes readability, changeability, extensibility and maintainability.

---

General rules

1. Follow standard conventions.
2. Keep it simple stupid. Simpler is always better. Reduce complexity as much as possible.
3. Boy scout rule. Leave the campground cleaner than you found it.
4. Always find root cause. Always look for the root cause of a problem.

Design rules

probonopd

Autodesk Fusion 360 on Linux

In the Web Browser

Ubuntu, Fedora, openSUSE, CentOS, SUSE Linux Enterprise, Debian,... users can finally use Autodesk Fusion 360 in the Linux Browser now.

https://myhub.autodesk360.com

On Chromium 55.0.2843.0 I get NET::ERR_CERTIFICATE_TRANSPARENCY_REQUIRED.

smoser

Mappings for DMI/SMBIOS to Linux and dmidecode

Information can be put into dmi tables via some qemu-system hosts (x86_64 and aarch64). That information is exposed in Linux under /sys/class/dmi/id and can be read with dmidecode. The names are very annoyingly inconsistent. The point of this doc is to map them.

Mappings

Example qemu cmdline:

qemu-system-x86_64 -smbios type=<type>,field=value[,...]

qemu-system-x86_64 -smbios type=0,vendor=superco,version=1.2.3

wess

; Ender 3 Custom Start G-code
M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature
M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature
M104 S160; start warming extruder to 160
G28 ; Home all axes
G29 ; Auto bed-level (BL-Touch)
G92 E0 ; Reset Extruder
M104 S{material_print_temperature_layer_0} ; Set Extruder temperature
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
M109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature