gistfile1.txt

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.16-ga5444ad-dirty (root@marc-G71GX) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #28 PREEMPT Thu Mar 28 12:05:40 CET 2013
[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7d
[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
[    0.000000] Machine: htcleo
[    0.000000] Nand Boot: 2
[    0.000000] Partition (from atag) lk -- Offset:212 Size:3
[    0.000000] Partition (from atag) recovery -- Offset:216 Size:30
[    0.000000] Partition (from atag) boot -- Offset:246 Size:28
[    0.000000] Partition (from atag) misc -- Offset:26e Size:8
[    0.000000] Partition (from atag) system -- Offset:276 Size:4b0
[    0.000000] Partition (from atag) userdata -- Offset:726 Size:7cb
[    0.000000] Partition (from atag) sboot -- Offset:ef1 Size:28
[    0.000000] Partition (from atag) cache -- Offset:f19 Size:28
[    0.000000] size_pmem_device: pmem pmem_adsp requests 42991616 bytes dynamically.
[    0.000000] size_pmem_device: pmem pmem requests 33554432 bytes dynamically.
[    0.000000] size_pmem_device: pmem pmem_venc requests 8388608 bytes dynamically.
[    0.000000] size_pmem_device: pmem pmem_audio requests 524288 bytes dynamically.
[    0.000000] reserve_memory_for: reserve 42991616 bytes from memory 3 for pmem_adsp.
[    0.000000] reserve_memory_for: reserve 33554432 bytes from memory 3 for pmem.
[    0.000000] reserve_memory_for: reserve 8388608 bytes from memory 3 for pmem_venc.
[    0.000000] reserve_memory_for: reserve 524288 bytes from memory 3 for pmem_audio.
[    0.000000] memory pool 3 (start 2adc0000 size 5200000) initialized
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] smem_find(137, 72): wrong size 56
[    0.000000] smem_find(137, 64): wrong size 56
[    0.000000] smem_find(137, 64): wrong size 56
[    0.000000] socinfo_init: v2, id=36, ver=2.0, raw_id=576, raw_ver=2
[    0.000000] ram_console: found existing buffer, size 26114, start 26114
[    0.000000] console [ram0] enabled
[    0.000000] htcleo_map_io: ramconsole init done!
[    0.000000] On node 0 totalpages: 103872
[    0.000000] free_area_init_node: node 0, pgdat c075168c, node_mem_map c0900000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000]   HighMem zone: 464 pages used for memmap
[    0.000000]   HighMem zone: 37872 pages, LIFO batch:7
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 102896
[    0.000000] Kernel command line: 
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 405MB = 405MB total
[    0.000000] Memory: 401156k/401156k available, 98300k reserved, 153344K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
[    0.000000]     vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0074000   ( 432 kB)
[    0.000000]       .text : 0xc0074000 - 0xc0709658   (6742 kB)
[    0.000000]       .data : 0xc070a000 - 0xc0752020   ( 289 kB)
[    0.000000]        .bss : 0xc0752044 - 0xc08ffa20   (1719 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:293
[    0.000000] $$$ msm_timer_init $$$
[    0.000000]  1DIV = 00000003
[    0.000000]  2DIV = 00000003
[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.001190] Calibrating delay loop... 508.72 BogoMIPS (lpj=2543616)
[    0.059906] pid_max: default: 32768 minimum: 301
[    0.060302] Mount-cache hash table entries: 512
[    0.060729] Initializing cgroup subsys debug
[    0.060760] Initializing cgroup subsys cpuacct
[    0.060791] Initializing cgroup subsys freezer
[    0.060821] CPU: Testing write buffer coherency: ok
[    0.063354] print_constraints: dummy: 
[    0.063415] rdev_init_debugfs: Error-Bad Function Input
[    0.063659] NET: Registered protocol family 16
[    0.063934] msm_gpio_init: start
[    0.065856] htcleo_init()
[    0.066955] Max ACPU freq from efuse data is 998400 KHz
[    0.066986] ACPU running at 768000 KHz
[    0.067016] 5 scaling frequencies supported.
[    0.067047] init_dex_comm: WinCE DEX init.
[    0.067108] init_dex_comm: WinCE DEX initialized.
[    0.067138] PLL0 @ f8005300: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz)
[    0.067169] PLL1 @ f8005320: MODE=00000007 L=00000028 M=00000000 N=00000001 freq=768000000 Hz (768 MHz)
[    0.067230] PLL4 @ f8005380: MODE=00000000 L=0000000f M=00000000 N=00000001 freq=288000000 Hz (288 MHz)
[    0.067291] PLL5 @ f80053a0: MODE=00000000 L=00000032 M=00000000 N=00000001 freq=960000000 Hz (960 MHz)
[    0.067321] PCB XC: 00000004
[    0.067352] AMSS version: 15.42.50.11U
[    0.067565] register analog ops = c072665c
[    0.067596] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier
[    0.067626] /proc/mic_level created
[    0.071411] Init Panel
[    0.071502] panel type is 1 :board id is 4 : AUO
[    0.071899] htcleo_init_mmc()+
[    0.072326] htcleo_init_mmc()-
[    0.074249] print_constraints: fs_gfx3d: normal 
[    0.106170] bio: create slab <bio-0> at 0
[    0.107666] mdp_probe: initialized
[    0.108459] usbcore: registered new interface driver usbfs
[    0.108825] usbcore: registered new interface driver hub
[    0.109039] usbcore: registered new device driver usb
[    0.109375] msm_i2c_probe
[    0.109436] msm_i2c_probe: clk_ctl 315, 400000 Hz
[    0.110595] print_constraints: dcdc1: 800 <--> 1350 mV at 1250 mV 
[    0.110687] rdev_init_debugfs: Error-Bad Function Input
[    0.110961] print_constraints: dcdc2: 1260 mV 
[    0.111022] rdev_init_debugfs: Error-Bad Function Input
[    0.111267] print_constraints: dcdc3: 800 <--> 3300 mV at 1800 mV 
[    0.111328] rdev_init_debugfs: Error-Bad Function Input
[    0.111694] print_constraints: ldo1: 1000 <--> 3150 mV at 2800 mV 
[    0.111785] rdev_init_debugfs: Error-Bad Function Input
[    0.111999] print_constraints: ldo2: 3300 mV 
[    0.112060] rdev_init_debugfs: Error-Bad Function Input
[    0.113861] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.114562] Bluetooth: Core ver 2.16
[    0.114776] NET: Registered protocol family 31
[    0.114807] Bluetooth: HCI device and connection manager initialized
[    0.114837] Bluetooth: HCI socket layer initialized
[    0.114868] Bluetooth: L2CAP socket layer initialized
[    0.115631] cfg80211: Calling CRDA to update world regulatory domain
[    0.116210] Switching to clocksource gp_timer
[    0.118041] [TTY_IO] create tty_wq for smd0
[    0.133697] spi clk = 0x0
[    0.133758] spi: SPI_CONFIG=0
[    0.133789] spi: SPI_IO_CONTROL=0
[    0.133789] spi: SPI_OPERATIONAL=0
[    0.133819] spi: SPI_ERROR_FLAGS_EN=0
[    0.133850] spi: SPI_ERROR_FLAGS=0
[    0.133850] -msm_spi_probe()
[    0.134582] NET: Registered protocol family 2
[    0.134796] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.135253] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.135498] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.135620] TCP: Hash tables configured (established 8192 bind 8192)
[    0.135650] TCP reno registered
[    0.135681] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.135711] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.136047] NET: Registered protocol family 1
[    0.137145] RPC: Registered named UNIX socket transport module.
[    0.137176] RPC: Registered udp transport module.
[    0.137207] RPC: Registered tcp transport module.
[    0.137237] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.137451] Unpacking initramfs...
[    0.206878] Freeing initrd memory: 956K
[    0.207031] PMU: registered new PMU device of type 0
[    0.209167] Notify: smsm init
[    0.225860] rpcrouter_smd_remote_notify: smd opened 0x  (null)
[    0.237487] Battery Probe
[    0.237548] batt: init over voltage interrupt detection. at 231237105 (1970-01-01 00:00:00.231206610 UTC)
[    0.237670] htc_battery_core_probe
[    0.240814] batt: htc_cable_status_update: 0 -> 1
[    0.240875] msm_hsusb_set_vbus_state called before driver initialized
[    0.240905] Battery Probe done
[    0.245605] Registered led device: button-backlight
[    1.066955] msm_i2c msm_i2c.0: [MSM I2C Err] status = 0x43C8, addr = 0x5C, flags = 0x00, last_addr = 48, reg = 0x00, last_reg = 0x08, last_flag = 0x01, cnt = 1, pos = 0
[    1.067047] msm_i2c msm_i2c.0: (00b8) Error during data xfer (-5) (00, 00)
[    1.067138] msm_i2c msm_i2c.0: [MSM I2C Err] status = 0x43C8, addr = 0x34, flags = 0x00, last_addr = 5C, reg = 0x00, last_reg = 0x00, last_flag = 0x00, cnt = 1, pos = 0
[    1.067230] msm_i2c msm_i2c.0: (0068) Error during data xfer (-5) (00, 00)
[    1.067932] input: htcleo-touchscreen as /devices/virtual/input/input0
[    1.068054] leo_touch_name 0-0022: Start touchscreen htcleo-touchscreen
[    1.069183] htcleo_wifi_init: start
[    1.070922] htcleo-microp 0-0066: microp version [05][14]
[    1.074829] htcleo-microp 0-0066: Init Done
[    1.075042] i2c-core: driver [htcleo-microp] using legacy suspend method
[    1.075073] i2c-core: driver [htcleo-microp] using legacy resume method
[    1.075256] capella_cm3602_probe: probe
[    1.075592] input: proximity as /devices/virtual/input/input1
[    1.076751] spi_bma150_probe: G-sensor connect with microP: start initial, kvalue = 0x0
[    1.116943] [GSNR] Gsensor disable
[    1.118011] Registered led device: flashlight
[    1.118072] [FLT]flashlight_probe: led_count = 0
[    1.118072] [FLT]flashlight_probe: The Flashlight Driver is ready
[    1.118408] [HS_MGR] (htc_35mm_probe) ++++++++++++++++++++
[    1.119232] input: h2w headset as /devices/virtual/input/input2
[    1.119781] [HS_MGR] (htc_35mm_probe) --------------------
[    1.120117] [HS_GPIO] (audiojack_probe) ++++++++++++++++++++
[    1.120208] DET IRQ Registered!
[    1.120269] MIC IRQ Registered!
[    1.120300] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
[    1.120330] [HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier
[    1.120361] [HS_GPIO] (audiojack_probe) --------------------
[    1.129669] highmem bounce pool size: 64 pages
[    1.130249] ashmem: initialized
[    1.132263] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.134246] Installing knfsd (copyright (C) 1996 [email protected]).
[    1.135040] fuse init (API version 7.16)
[    1.135681] yaffs: yaffs built Mar 27 2013 20:53:24 Installing.
[    1.137207] io scheduler noop registered
[    1.137237] io scheduler deadline registered (default)
[    1.137481] io scheduler cfq registered
[    1.139373] clock-wince: pc_clk_set_rate: id=42 rate=24576000
[    1.139434] clock-wince: set mdns: 42, 24576000; bitidx=0, offset=0, ns=0
[    1.139465] set_mdns_host_clock: FIXME! Don't know how to set clock 42 - no known Md/Ns reg
[    1.139495] [CLK] clk_set_rate: failed to set clk: MDP_LCDC_PCLK_CLK, rate=24576000, flags=0x200, rc=-524
[    1.139556] clock-wince: pc_clk_set_rate: id=43 rate=24576000
[    1.139587] clock-wince: set mdns: 43, 24576000; bitidx=0, offset=0, ns=0
[    1.139617] set_mdns_host_clock: FIXME! Don't know how to set clock 43 - no known Md/Ns reg
[    1.139648] [CLK] clk_set_rate: failed to set clk: MDP_LCDC_PAD_PCLK_CLK, rate=24576000, flags=0x200, rc=-524
[    1.140197] setup_fb_info msmfb->xres 480, msmfb->yres 800
[    1.140380] msmfb_probe() installing 480 x 800 panel
[    1.148803] msmfb: pan_update in state(1)
[    1.148834] msmfb: full update starting
[    1.148864] mdp_lcdc_probe: initialized
[    1.150115] msm_serial: detected port #0
[    1.150177] msm_serial.0: ttyMSM0 at MMIO 0xa9a00000 (irq = 229) is a MSM
[    1.195770] msmfb: full update completed
[    1.195831] msmfb: turning on panel
[    1.195831] lcdc_unblank: ()
[    1.195861] auo_panel_unblank
[    1.196166] msm_serial: driver initialized
[    1.196807] msm_serial_hs_init failed to load
[    1.197265] [BT]msm_serial_hs module loaded
[    1.198822] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
[    1.203918] loop: module loaded
[    1.204071] pmem: Initializing pmem as cached
[    1.204528] allocating 33554432 bytes at 2adc0000 physical for pmem
[    1.204620] pmem: Initializing pmem_adsp as cached
[    1.204986] allocating 42991616 bytes at 2cdc0000 physical for pmem_adsp
[    1.205108] pmem: Initializing pmem_audio as non-cached
[    1.205444] allocating 524288 bytes at 2f6c0000 physical for pmem_audio
[    1.205535] pmem: Initializing pmem_venc as cached
[    1.205902] allocating 8388608 bytes at 2f740000 physical for pmem_venc
[    1.206512] Error: Driver 'tps65023' is already registered, aborting...
[    1.207641] msm_nand: allocated dma buffer at ffdb3000, dma_addr 21370000
[    1.207794] status: e03020
[    1.207824] nandid: 5510bcad maker ad device bc
[    1.207855] Found a supported NAND device
[    1.207855] NAND Id  : 0xBCAD
[    1.207885] Buswidth : 16 Bits 
[    1.207916] Density  : 512 MByte
[    1.207916] Pagesize : 2048 Bytes
[    1.207946] Erasesize: 131072 Bytes
[    1.207946] Oobsize  : 64 Bytes
[    1.208007] msm_nand: read CFG0 = ea5400c0, CFG1 = 6744e
[    1.208038] CFG0 Old: 0xea5400c0 
[    1.208038] CFG1 Old: 0x0006744e 
[    1.208068] CFG0 Init  : 0xea5400c0 
[    1.208099] CFG1 Init  : 0x0006744e 
[    1.208099] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4 num_addr_cycles=5
[    1.208160] DEV_CMD1: f00f3000
[    1.208190] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
[    1.208404] Device WiFi MAC Address: macaddr=00:23:76:8a:40:b9
[    1.208618] Device Bluetooth MAC Address: 00:23:76:6e:4b:c6
[    1.208648] #MTD# parts in atag = 8
[    1.208679] Creating 8 MTD partitions on "msm_nand":
[    1.208709] 0x000004240000-0x0000042a0000 : "lk"
[    1.210296] 0x0000042c0000-0x0000048c0000 : "recovery"
[    1.214813] 0x0000048c0000-0x000004dc0000 : "boot"
[    1.219390] 0x000004dc0000-0x000004ec0000 : "misc"
[    1.221282] 0x000004ec0000-0x00000e4c0000 : "system"
[    1.292297] ###BAD BLOCK 1673 0D120000###
[    1.304565] 0x00000e4c0000-0x00001de20000 : "userdata"
[    1.424346] ###BAD BLOCK 3577 1BF20000###
[    1.426727] ###BAD BLOCK 3611 1C360000###
[    1.443023] 0x00001de20000-0x00001e320000 : "sboot"
[    1.447265] 0x00001e320000-0x00001e820000 : "cache"
[    1.452880] [PPP] ppp_init disable ppp debug msg
[    1.452941] PPP generic driver version 2.4.2
[    1.453491] PPP Deflate Compression module registered
[    1.453521] PPP BSD Compression module registered
[    1.454071] PPP MPPE Compression module registered
[    1.454101] NET: Registered protocol family 24
[    1.455627] tun: Universal TUN/TAP device driver, 1.6
[    1.455657] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.456207] libra_sdioif_init: Loaded Successfully
[    1.456237] rmnet_init: SMD devices[8]
[    1.463684] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.464233] usbcore: registered new interface driver usb_ehset_test
[    1.465362] [USB] init(): Failed to register androidplatform driver
[    1.467163] GPIO Matrix Keypad Driver: Start keypad matrix for htcleo-keypad in interrupt mode
[    1.467254] GPIO Input Driver: Start gpio inputs for htcleo-keypad in interrupt mode
[    1.468139] input: htcleo-keypad as /devices/virtual/input/input3
[    1.469543] dummy_keypad_init: dummy_keypad: initial running...
[    1.469909] input: dummy_keypad as /devices/virtual/input/input4
[    1.470397] [KEY] Ship code, disable key reset.
[    1.472473] msm_rpc_client_req: RPC call was not successful (3)
[    1.474060] using rtc device, msm_rtc, for alarms
[    1.474151] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
[    1.475280] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
[    1.568939] Driver for 1-wire Dallas network protocol.
[    1.569427] [ds2746_batt]ds2746_battery_init
[    1.569488] /proc/fast_charge created
[    1.569610] [ds2746_batt] ds2746_battery_prob
[    1.569641] batt: ds2784_notify: 0 1 at 1562954090 (1970-01-01 00:00:01.562923579 UTC)
[    1.569702] batt: charger ON (SLOW) at 1562984600 (1970-01-01 00:00:01.562984600 UTC)
[    1.570007] [D:BATT]Use 600 Kohm thermal resistance
[    1.570861] device-mapper: uevent: version 1.0.3
[    1.571685] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[    1.571868] Bluetooth: HCI UART driver ver 2.2
[    1.571899] Bluetooth: HCI H4 protocol initialized
[    1.571899] Bluetooth: HCILL protocol initialized
[    1.572906] reset on ID 19
[    1.572967] mmc0: Clock assert failed at 144000 Hz with err -5
[    1.572998] reset on ID 19
[    1.573028] mmc0: Clock deassert failed at 144000 Hz with err -5
[    1.573699] mmc0: Qualcomm MSM SDCC-core at 0x00000000a0300000 irq 24,0 dma 8 dmacrcri 6
[    1.573730] mmc0: Platform slot type: N/A
[    1.573760] mmc0: 8 bit data mode disabled
[    1.573791] mmc0: 4 bit data mode disabled
[    1.573822] mmc0: polling status mode disabled
[    1.573822] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
[    1.573852] mmc0: Slot eject status = 1
[    1.573883] mmc0: Power save feature enable = 1
[    1.573913] mmc0: DM non-cached buffer at ffd80000, dma_addr 0x20800000
[    1.573944] mmc0: DM cmd busaddr 0x20800000, cmdptr busaddr 0x20817f40
[    1.574462] reset on ID 21
[    1.574493] mmc1: Clock assert failed at 144000 Hz with err -5
[    1.574523] reset on ID 21
[    1.574554] mmc1: Clock deassert failed at 144000 Hz with err -5
[    1.575408] @@@ SD power 0 @@@
[    1.575775] mmc1: Qualcomm MSM SDCC-core at 0x00000000a0400000 irq 26,0 dma 8 dmacrcri 7
[    1.575805] mmc1: Platform slot type: N/A
[    1.575836] mmc1: 8 bit data mode disabled
[    1.575866] mmc1: 4 bit data mode disabled
[    1.575866] mmc1: polling status mode disabled
[    1.575897] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 64000000 Hz
[    1.575927] mmc1: Slot eject status = 0
[    1.575958] mmc1: Power save feature enable = 1
[    1.575988] mmc1: DM non-cached buffer at ffd60000, dma_addr 0x20820000
[    1.576019] mmc1: DM cmd busaddr 0x20820000, cmdptr busaddr 0x20837f40
[    1.576446] [D:BATT] V=4189(6b5) I=0(ffffffff) C=1229.0/1230(1114) id=4(a8) T=310(f0) KADC=1000
[    1.576507] [D:BATT] acr update: P=990, C=4340.
[    1.576965] [D:BATT]new RARC=990 C=1217mAh adc=4340.
[    1.576995] [D:BATT] state change(0->3), full count=0, over load count=0 [1569]
[    1.577056] [D:BATT] state change(3->5), full count=0, over load count=1 [1570]
[    1.577148] batt: ds2784_notify: 1 99 at 1570429240 (1970-01-01 00:00:01.570398729 UTC)
[    1.577209] batt: batt:power_supply_changed: battery at 1570490261 (1970-01-01 00:00:01.570490261 UTC)
[    1.578979] usbcore: registered new interface driver usbhid
[    1.579010] usbhid: USB HID core driver
[    1.579986] logger: created 256K log 'log_main'
[    1.580352] logger: created 256K log 'log_events'
[    1.580718] logger: created 256K log 'log_radio'
[    1.581085] logger: created 256K log 'log_system'
[    1.583343] ALSA device list:
[    1.583404]   No soundcards found.
[    1.583557] GACT probability NOT on
[    1.583618] Mirror/redirect action on
[    1.583618] u32 classifier
[    1.583648]     Actions configured
[    1.583679] Netfilter messages via NETLINK v0.30.
[    1.583740] nf_conntrack version 0.5.0 (6283 buckets, 25132 max)
[    1.584228] ctnetlink v0.93: registering with nfnetlink.
[    1.584320] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.584350] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.585052] xt_time: kernel timezone is -0000
[    1.585327] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.585571] arp_tables: (C) 2002 David S. Miller
[    1.585662] TCP cubic registered
[    1.585693] Initializing XFRM netlink socket
[    1.586486] NET: Registered protocol family 10
[    1.589233] Mobile IPv6
[    1.589324] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.589569] IPv6 over IPv4 tunneling driver
[    1.591278] NET: Registered protocol family 17
[    1.591369] NET: Registered protocol family 15
[    1.591400] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.591705] ######## bthid_init: ########
[    1.592163] ######## bthid_init: done ########
[    1.592224] lib80211: common routines for IEEE802.11 drivers
[    1.592254] lib80211_crypt: registered algorithm 'NULL'
[    1.592285] Registering the dns_resolver key type
[    1.592376] VFP support v0.3: implementor 51 architecture 64 part 0f variant 0 rev 1
[    1.592407] ThumbEE CPU extension supported.
[    1.594116] clock_late_init() disabled 28 unused clocks
[    1.594604] [Port list] init()
[    1.594635] [Port list] Virtual Address for port_list: [f81b6da0]
[    1.594665] [Port list] Physical Address for port_list: [1B6DA0]
[    1.595947] wifi_nvs_init
[    1.596588] input: lightsensor-level as /devices/virtual/input/input5
[    1.600280] @@@ SD power 17 @@@
[    1.603851] regulator_init_complete: ldo2: incomplete constraints, leaving on
[    1.604003] regulator_init_complete: ldo1: incomplete constraints, leaving on
[    1.604187] regulator_init_complete: dcdc3: incomplete constraints, leaving on
[    1.604339] regulator_init_complete: dcdc2: incomplete constraints, leaving on
[    1.604522] regulator_init_complete: dcdc1: incomplete constraints, leaving on
[    1.605499] rs30000048 rs30000048.65536: setting system clock to 2013-03-28 11:06:48 UTC (1364468808)
[    1.606750] Freeing init memory: 432K
[    1.608245] init: could not import file /init.${ro.hardware}.rc
[    1.609069] init: could not import file /system/etc/init.local.rc
[    1.610870] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    1.664245] @@@ SD power 15 @@@
[    1.795410] keychord: using input dev h2w headset for fevent
[    1.795471] keychord: using input dev dummy_keypad for fevent
[    1.795684] init: cannot open '/initlogo.rle'
[    1.937469] mmc1: host does not support reading read-only switch. assuming write-enable.
[    1.942596] mmc1: new high speed SDHC card at address 0002
[    1.943969] mmcblk0: mmc1:0002 00000 14.9 GiB 
[    1.947265]  mmcblk0: p1 p2
[    4.466186] EXT4-fs (mmcblk0p2): barriers disabled
[    4.473083] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: barrier=0
[    4.614990] [Port list] TCP port#: [5555]
[    4.615081] [Port list] Add port [5555]
[    4.615142] [Port list] [1] = 5555
[    4.999511] tun: version magic '2.6.32_tytung_jellybean_r1 preempt mod_unload ARMv7 ' should be '3.0.16-ga5444ad-dirty preempt mod_unload ARMv7 '
[    5.028656] fuse: version magic '2.6.32_tytung_jellybean_r1 preempt mod_unload ARMv7 ' should be '3.0.16-ga5444ad-dirty preempt mod_unload ARMv7 '
[    5.098907] init: property (null) has no value for assigning to sys.usb.config
[    5.099456] init: property (null) has no value for assigning to sys.usb.state
[    5.857086] warning: `rild' uses 32-bit capabilities (legacy support in use)
[    6.018676] -qmi_open 0
[    6.018768] qmi: smd opened
[    6.018890] qmi: send: svc=00 cid=00 tid=0001 type=0022 size=0004
[    6.018981] qmi: send: tlv: 01 0001 { 01 }
[    6.019104] qmi: send: svc=00 cid=00 tid=0001 type=0022 size=0004
[    6.019195] qmi: send: tlv: 01 0001 { 01 }
[    6.019287] qmi: send: svc=00 cid=00 tid=0001 type=0022 size=0004
[    6.019409] qmi: send: tlv: 01 0001 { 01 }
[    6.019561] -qmi_open 0
[    6.019683] qmi: recv: svc=00 cid=00 tid=0001 type=0022 size=000c
[    6.019775] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[    6.019927] qmi: recv: tlv: 01 0002 { 01 01 }
[    6.020019] qmi: ctl: wds use client_id 0x01
[    6.020111] qmi: recv: svc=00 cid=00 tid=0001 type=0022 size=000c
[    6.020202] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[    6.020324] qmi: recv: tlv: 01 0002 { 01 01 }
[    6.020416] qmi: ctl: wds use client_id 0x01
[    6.020507] qmi: recv: svc=00 cid=00 tid=0001 type=0022 size=000c
[    6.020599] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[    6.020721] qmi: recv: tlv: 01 0002 { 01 01 }
[    6.020812] qmi: ctl: wds use client_id 0x01
[    6.020965] -qmi_open 0
[    6.022460] +qmi_read 256
[    7.214050] NAND boot, writing additional init commands to /dev/smd0
[    9.913604] htc-acoustic: open
[    9.931213] htc-acoustic: mmap
[    9.931549] htc-acoustic: ioctl
[    9.931610] htc-acoustic: ioctl: ACOUSTIC_UPDATE_ADIE called 1320.
[    9.932159] htc-acoustic: ioctl: done.
[    9.937744] htc-acoustic: release
[    9.937988] Audio: voice: stop
[   11.476013] msmfb unknown ioctl: -1067946604
[   22.455047] Audio: SWITCH DEVICE 17306899, acdb 607
[   22.455078] q6audio_init
[   22.455169] audio: init: first run, init dummy control
[   22.559600] dal_attach: status = 0, name = 'DAL_AQ_AUD'
[   22.560821] dal_attach: status = 0, name = 'DAL_AQ_AUD'
[   23.163269] open done!
[   23.268432] dal_attach: status = 0, name = 'DAL00'
[   23.268707] dal_attach: status = 0, name = 'DAL00'
[   23.268737] Audio: htcleo_analog_init
[   23.268798] __msm_rpc_connect: server not found 30000061:60001
[   23.268829] pmic_rpc_req_reply: init rpc failed! ans = -113 for 0x60001 version, fallback
[   23.268859] __msm_rpc_connect: server not found 30000061:50001
[   23.268890] pmic_rpc_req_reply: init rpc failed! ans = -113 for 0x50001 version, fallback
[   23.268920] __msm_rpc_connect: server not found 30000061:30001
[   23.268920] pmic_rpc_req_reply: init rpc failed! ans = -113 for 0x30001 version, fallback
[   23.268951] __msm_rpc_connect: server not found 30000061:20001
[   23.268981] pmic_rpc_req_reply: init rpc failed! ans = -113 for 0x20001 version, fallback
[   23.269012] pmic_rpc_req_reply: successfully connected to 0x10001 rpc version
[   23.281188] acdb: trying htcleo.acdb
[   23.295166] acdb: load 'htcleo.acdb' failed, trying 'default.acdb'
[   23.334930] Audio: htcleo_get_rx_vol 500
[   23.335235] Audio: htcleo_get_rx_vol 500
[   23.335906] Audio: htcleo_get_rx_vol 500
[   23.336669] audio_cb: s=1 e=0107605c status=20
[   23.336883] Audio: htcleo_get_rx_vol 700
[   23.337158] Audio: htcleo_get_rx_vol 700
[   23.337677] audio_cb: s=1 e=0107605c status=20
[   23.337951] Audio: htcleo_get_rx_vol 700
[   23.338256] Audio: htcleo_get_rx_vol 700
[   23.338623] audio_cb: s=1 e=0107605c status=20
[   23.339050] Audio: htcleo_get_rx_vol 700
[   23.339355] Audio: htcleo_get_rx_vol 700
[   23.339752] audio_cb: s=1 e=0107605c status=20
[   23.340179] Audio: htcleo_get_rx_vol 0
[   23.340484] Audio: htcleo_get_rx_vol 500
[   23.340850] audio_cb: s=1 e=0107605c status=20
[   23.341308] Audio: htcleo_get_rx_vol 500
[   23.341644] Audio: htcleo_get_rx_vol 700
[   23.342102] audio_cb: s=1 e=0107605c status=20
[   23.342315] Audio: htcleo_get_rx_vol 500
[   23.343017] audio_cb: s=1 e=0107605c status=20
[   23.343231] Audio: htcleo_get_rx_vol 400
[   23.343963] audio_cb: s=1 e=0107605c status=20
[   23.344177] Audio: htcleo_get_rx_vol 400
[   23.345153] Audio: htcleo_get_rx_vol 400
[   23.345825] Audio: htcleo_get_rx_vol 700
[   23.346252] audio_cb: s=1 e=0107605c status=20
[   23.346496] Audio: htcleo_get_rx_vol 700
[   23.347229] audio_cb: s=1 e=0107605c status=20
[   23.347595] audio_update_acdb (17306899, 607)
[   23.347625] table
[   23.347625] acdb: 588 bytes for device 607, rate 48000.
[   23.347656] res1 = 588
[   23.347656] res2 = 588
[   23.347686] call audio_set_table
[   23.348205] audio_cb: s=1 e=0107605c status=20
[   23.349273] audio_cb: s=1 e=0107605c status=20
[   23.349822] Audio: SWITCH DEVICE 17306898, acdb 507
[   23.350311] audio_cb: s=1 e=0107605c status=20
[   23.350830] Audio: htcleo_get_rx_vol -1500
[   23.350860] $$ DEV=01081513: vol is -1500
[   23.351257] audio_cb: s=1 e=0107605c status=20
[   23.352233] audio_cb: s=1 e=0107605c status=20
[   23.353149] audio_cb: s=1 e=0107605c status=20
[   23.354034] audio_cb: s=1 e=0107605c status=20
[   23.360961] audio_cb: s=1 e=0107605c status=20
[   23.363586] audio_cb: s=1 e=0107605c status=20
[   23.367523] audio_cb: s=1 e=0107605c status=20
[   41.115997] request_suspend_state: wakeup (3->0) at 41108496776 (2013-03-28 11:07:27.999383434 UTC)
[   41.848815] htc-acoustic: open
[   41.849822] htc-acoustic: mmap
[   41.849975] htc-acoustic: ioctl
[   41.849975] htc-acoustic: ioctl: ACOUSTIC_UPDATE_ADIE called 1569.
[   41.850006] htc-acoustic: ioctl: done.
[   41.850250] htc-acoustic: release
[   41.850280] Audio: voice: stop
[   45.888641] Audio: SWITCH DEVICE 17306899, acdb 607
[   45.888671] Audio: SWITCH DEVICE 17306898, acdb 507
[   45.888702] audio_update_acdb (17306898, 507)
[   45.888732] table
[   45.888732] acdb: 871 bytes for device 507, rate 8000.
[   45.888763] res1 = 871
[   45.888763] res2 = 871
[   45.888793] call audio_set_table
[   45.898406] Audio: htcleo_get_rx_vol -1500
[   45.898437] $$ DEV=01081513: vol is -1500
[   45.903045] audio_cb: s=1 e=0107605c status=20
[   47.359283] sd_blk_issue_rw_rq:(sd-qd)finish cmd(25) start 30960384, size 192, time=410369 us
[   48.610504] sd_blk_issue_rw_rq:(sd-qd)finish cmd(25) start 30960128, size 136, time=617370 us
[   48.610687] sd_blk_issue_rw_rq: ---(sd-qd) start sector=30960128, size 136, total time=617614 us
[   48.877960] request_suspend_state: wakeup (0->0) at 48870459668 (2013-03-28 11:07:35.761315809 UTC)