Skip to content

Instantly share code, notes, and snippets.

@mark-stopka

mark-stopka/e3372_openwrt_setup.md

Forked from aliicex/e3372_openwrt_setup.md
Created October 17, 2020 15:32
Show Gist options
  • Save mark-stopka/590e403559cf59b44758062481c179d9 to your computer and use it in GitHub Desktop.
Save mark-stopka/590e403559cf59b44758062481c179d9 to your computer and use it in GitHub Desktop.
Download ZIP
Using the Huawei E3372 4G Dongle with OpenWRT
Raw
e3372_openwrt_setup.md

Hardware requirements:

USB modem - Huawei E3372h-153/E3372s-153 (in StickMode; non-HiLink)

Firmware versions beginning with 21.xxx.xx.xx.xx NOT 22.xxx.xx.xx.xx

Router running OpenWRT; I use:

  • GL.iNet AR750S firmware v3.022
  • OpenWrt 18.06.1 r7258-5eb055306f / LuCI openwrt-18.06 branch (git-18.196.56128-9112198)

Ensure the following are installed:

  • usbutils
  • usb-modeswitch
  • kmod-usb-net-huawei-cdc-ncm
  • kmod-usb-net-cdc-ncm
  • kmod-usb-net-cdc-ether
  • comgt-ncm
  • kmod-usb-serial
  • kmod-usb-serial-option
  • kmod-usb-serial-wwan
  • luci-proto-ncm
  • luci-proto-3g

Verifying the modem:

Confirm the modem is recognised. Note that 12d1:1506 is the USB ID after mode switching has taken place, and indicates that the net interfaces are driven by the Linux huawei_cdc_ncm driver.

root@GL-AR750S:~# lsusb
Bus 001 Device 019: ID 12d1:1506 Huawei Technologies Co., Ltd. Modem/Networkcard

Confirm there are two interfaces:

root@GL-AR750S:~# dmesg | grep tty
[ 1160.409071] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 1160.423206] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1

Check the current mode by sending AT commands (the GL-iNet firmware has a nice UI for sending AT commands manually. I had to send the commands to port /dev/ttyUSB0). The list of all modes is:

^SETPORT:3: 3G DIAG
^SETPORT:10: 4G MODEM
^SETPORT:1: 3G MODEM
^SETPORT:12: 4G PCUI
^SETPORT:13: 4G DIAG
^SETPORT:5: 3G GPS
^SETPORT:14: 4G GPS
^SETPORT:A: BLUE TOOTH
^SETPORT:16: NCM
^SETPORT:A1: CDROM
^SETPORT:A2: SD

For this guide, we need at least 1, 12 and 16 (note, 12 is always required, or you will brick the modem)

AT^SETPORT?
^SETPORT:“A1,A2;12,1,16,A1,A2
OK

Setting it up:

Add the following entry to /etc/config/network; substituting the APN and dialnumber for that of your mobile provider (and adding username/password if required)

config interface 'modem_1_1'
        option mode 'preferlte'
        option apn 'three.co.uk'
        option dialnum '*99#'
        option proto 'ncm'
        option ifname 'wwan0'
        option device '/dev/ttyUSB0'
        option ipv6 'auto'
        option metric '40'
        option delegate '0'
        option disabled '0'

Note, for 3G only, the following works:

config interface 'modem_1_1'
    option ifname '3g-modem'
    option service 'umts'
    option apn 'three.co.uk'
    option proto '3g'
    option device '/dev/ttyUSB1'
    option dialnumber '*99#'
    option metric '40'
    option disabled '0'

After adding one of these entries; do:

root@GL-AR750S:~# uci commit /etc/config/network
root@GL-AR750S:~# service network restart

With NCM, logs should show something like. You'll know it's up if there are no errors and a DHCP lease is obtained

Fri May 31 07:47:54 2019 daemon.notice netifd: Interface 'modem_1_1_4' is disabled
Fri May 31 07:47:54 2019 daemon.notice netifd: modem_1_1 (5878): Stopping network modem_1_1
Fri May 31 07:47:55 2019 daemon.notice netifd: modem_1_1 (5878): sending -> AT^NDISDUP=1,0
Fri May 31 07:47:55 2019 daemon.warn odhcpd[1856]: DHCPV6 SOLICIT IA_NA from 00010001221705213c15c2c0fd64 on br-lan: ok fd56:3f5a:232e:10::2fb/128
Fri May 31 07:47:55 2019 daemon.notice netifd: modem_1_1 (5878): Command failed: Permission denied
Fri May 31 07:47:55 2019 daemon.notice netifd: Interface 'modem_1_1' is now down
Fri May 31 07:47:55 2019 daemon.notice netifd: Interface 'modem_1_1' is setting up now
Fri May 31 07:47:56 2019 daemon.warn odhcpd[1856]: DHCPV6 REQUEST IA_NA from 00010001221705213c15c2c0fd64 on br-lan: ok fd56:3f5a:232e:10::2fb/128
Fri May 31 07:47:59 2019 daemon.notice netifd: modem_1_1 (6032): sending -> AT
Fri May 31 07:47:59 2019 daemon.notice netifd: modem_1_1 (6032): sending -> ATZ
Fri May 31 07:48:00 2019 daemon.notice netifd: modem_1_1 (6032): sending -> ATQ0
Fri May 31 07:48:01 2019 daemon.notice netifd: modem_1_1 (6032): sending -> ATV1
Fri May 31 07:48:01 2019 daemon.notice netifd: modem_1_1 (6032): sending -> ATE1
Fri May 31 07:48:02 2019 daemon.notice netifd: modem_1_1 (6032): sending -> ATS0=0
Fri May 31 07:48:03 2019 daemon.notice netifd: modem_1_1 (6032): sending -> AT+CGDCONT=1,"IP","three.co.uk"
Fri May 31 07:48:03 2019 daemon.notice netifd: modem_1_1 (6032): Configuring modem
Fri May 31 07:48:03 2019 daemon.notice netifd: modem_1_1 (6032): Setting mode
Fri May 31 07:48:04 2019 daemon.notice netifd: modem_1_1 (6032): sending -> AT^SYSCFGEX="030201",3fffffff,2,4,7fffffffffffffff,,
Fri May 31 07:48:05 2019 daemon.notice netifd: modem_1_1 (6032): Starting network modem_1_1
Fri May 31 07:48:05 2019 daemon.notice netifd: modem_1_1 (6032): Connecting modem
Fri May 31 07:48:06 2019 daemon.notice netifd: modem_1_1 (6032): sending -> AT^NDISDUP=1,1,"three.co.uk"
Fri May 31 07:48:06 2019 daemon.notice netifd: modem_1_1 (6032): Setting up wwan0
Fri May 31 07:48:07 2019 daemon.notice netifd: Interface 'modem_1_1_4' is enabled
Fri May 31 07:48:07 2019 daemon.notice netifd: Interface 'modem_1_1' is now up
Fri May 31 07:48:07 2019 daemon.notice netifd: Network device 'wwan0' link is up
Fri May 31 07:48:07 2019 daemon.notice netifd: Network alias 'wwan0' link is up
Fri May 31 07:48:07 2019 daemon.notice netifd: Interface 'modem_1_1_4' has link connectivity
Fri May 31 07:48:07 2019 daemon.notice netifd: Interface 'modem_1_1_4' is setting up now
Fri May 31 07:48:07 2019 daemon.notice netifd: modem_1_1_4 (6862): udhcpc: started, v1.28.3
Fri May 31 07:48:08 2019 daemon.notice netifd: modem_1_1_4 (6862): udhcpc: sending discover
Fri May 31 07:48:08 2019 daemon.notice netifd: modem_1_1_4 (6862): udhcpc: sending select for 100.93.141.179
Fri May 31 07:48:08 2019 daemon.notice netifd: modem_1_1_4 (6862): udhcpc: lease of 100.93.141.179 obtained, lease time 518400
Fri May 31 07:48:09 2019 daemon.notice netifd: Interface 'modem_1_1_4' is now up
Fri May 31 07:48:19 2019 user.notice firewall: Reloading firewall due to ifup of modem_1_1 (wwan0)

With 3g, you'll see similar; again, look for an IP address being assigned:

Fri May 31 08:21:37 2019 daemon.notice netifd: Interface 'modem_1_1' is setting up now
Fri May 31 08:21:40 2019 daemon.notice netifd: modem_1_1 (22639): cat: can't open '/tmp/modem.1-1/signal': No such file or directory
Fri May 31 08:21:40 2019 daemon.notice pppd[22823]: pppd 2.4.7 started by root, uid 0
Fri May 31 08:21:41 2019 local2.info chat[22935]: abort on (BUSY)
Fri May 31 08:21:41 2019 local2.info chat[22935]: abort on (NO CARRIER)
Fri May 31 08:21:41 2019 local2.info chat[22935]: abort on (ERROR)
Fri May 31 08:21:41 2019 local2.info chat[22935]: report (CONNECT)
Fri May 31 08:21:41 2019 local2.info chat[22935]: timeout set to 10 seconds
Fri May 31 08:21:41 2019 local2.info chat[22935]: send (AT+CGDCONT=1,"IP","three.co.uk"^M)
Fri May 31 08:21:42 2019 local2.info chat[22935]: timeout set to 30 seconds
Fri May 31 08:21:42 2019 local2.info chat[22935]: expect (OK)
Fri May 31 08:21:42 2019 local2.info chat[22935]: ^M
Fri May 31 08:21:42 2019 local2.info chat[22935]: OK
Fri May 31 08:21:42 2019 local2.info chat[22935]:  -- got it
Fri May 31 08:21:42 2019 local2.info chat[22935]: send (ATD*99#^M)
Fri May 31 08:21:42 2019 local2.info chat[22935]: expect (CONNECT)
Fri May 31 08:21:42 2019 local2.info chat[22935]: ^M
Fri May 31 08:21:42 2019 local2.info chat[22935]: ^M
Fri May 31 08:21:42 2019 local2.info chat[22935]: CONNECT
Fri May 31 08:21:42 2019 local2.info chat[22935]:  -- got it
Fri May 31 08:21:42 2019 local2.info chat[22935]: send ( ^M)
Fri May 31 08:21:42 2019 daemon.info pppd[22823]: Serial connection established.
Fri May 31 08:21:42 2019 kern.info kernel: [67662.097799] 3g-modem_1_1: renamed from ppp0
Fri May 31 08:21:42 2019 daemon.info pppd[22823]: Using interface 3g-modem_1_1
Fri May 31 08:21:42 2019 daemon.notice pppd[22823]: Connect: 3g-modem_1_1 <--> /dev/ttyUSB1
Fri May 31 08:21:43 2019 daemon.warn pppd[22823]: Could not determine remote IP address: defaulting to 10.64.64.64
Fri May 31 08:21:43 2019 daemon.notice pppd[22823]: local  IP address 10.51.143.194
Fri May 31 08:21:43 2019 daemon.notice pppd[22823]: remote IP address 10.64.64.64
Fri May 31 08:21:43 2019 daemon.notice pppd[22823]: primary   DNS address 172.30.139.16
Fri May 31 08:21:43 2019 daemon.notice pppd[22823]: secondary DNS address 172.31.139.16
Fri May 31 08:21:43 2019 daemon.notice netifd: Network device '3g-modem_1_1' link is up
Fri May 31 08:21:43 2019 daemon.notice netifd: Interface 'modem_1_1' is now up
@makedir
Copy link

makedir commented Jan 28, 2024 •
edited
Loading

I cant get mine to work with a Glinet Brume 2 witn OpenWRT 21, Mango v2 also not working with 18, both fw 4.x, it doesnt get a ipv4 at the end: https://forum.openwrt.org/t/huawei-e3372-not-getting-ipv4-through-wwan-4-interface/185568

You maybe have an idea why? You ever updated your router to fw 4.x, does it still work?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment