Install-UiPathNugetFileShare.ps1

<#
 .SYNOPSIS
   Configure fileshare for UiPath Orchestrator Nuget
  
 .Description
   Configure fileshare for UiPath Orchestrator Nuget

 .PARAMETER shareUsername
   String. The local username 

 .PARAMETER sharePassword
   String. The local usernames password

 .PARAMETER folderName
   String. The folder name

 .INPUTS 
   Parameters above.

 .OUTPUTS
   None

 .Example
   powershell.exe -ExecutionPolicy Bypass ".\Install-UiPathNugetFileShare.ps1" -shareUsername "web" -sharePassword "P@ssw0rdP@ssw0rd" -folderName "nuget"
#>
[CmdletBinding()]
param(
    [Parameter(Mandatory = $true)]
    [string]  $shareUsername,

    [Parameter(Mandatory = $true)]
    [string]  $sharePassword,

    [Parameter(Mandatory = $true)]
    [string]  $folderName
)

# Set Error Action to Silently Continue
$ErrorActionPreference = "SilentlyContinue"
# Script Version
$sScriptVersion = "1.0"
# Debug mode; $true - enabled ; $false - disabled
$sDebug = $true
# Log File Info
$sLogPath = "C:\temp\log"
$sLogName = "Install-UiPathNugetFileShare.ps1.log"
$sLogFile = Join-Path -Path $sLogPath -ChildPath $sLogName

function Main {
  try {
    Start-Transcript -Path "$sLogPath\Install-UiPathNugetFileShare-Transcript.ps1.txt" -Append

    # Setup temp dir in %appdata%\Local\Temp
    $tempDirectory = (Join-Path 'C:\temp\' "UiPathNugetFileShare-$(Get-Date -f "yyyyMMddhhmmssfff")")
    New-Item -ItemType Directory -Path $tempDirectory -Force

    Install-WindowsFeature -Name FS-FileServer -IncludeAllSubFeature -IncludeManagementTools

    $Secure_String_Pwd = ConvertTo-SecureString $sharePassword -AsPlainText -Force
    New-LocalUser -Name $shareUsername -Password $Secure_String_Pwd

    mkdir c:\nugetpackages
    New-SmbShare -Name nugetpackages -Path 'C:\nugetpackages' -FullAccess 'web','Everyone'

  }
  catch {
    Log-Error -LogPath $sLogFile -ErrorDesc "$($_.exception.message) on $(Get-Date)" -ExitGracefully $True
  }

}

<#
  .SYNOPSIS
    Creates log file

  .DESCRIPTION
    Creates log file with path and name that is passed. Checks if log file exists, and if it does deletes it and creates a new one.
    Once created, writes initial logging data

  .PARAMETER LogPath
    Mandatory. Path of where log is to be created. Example: C:\Windows\Temp

  .PARAMETER LogName
    Mandatory. Name of log file to be created. Example: Test_Script.log

  .PARAMETER ScriptVersion
    Mandatory. Version of the running script which will be written in the log. Example: 1.5

  .INPUTS
    Parameters above

  .OUTPUTS
    Log file created
 #>
function Log-Start {

    [CmdletBinding()]

    param (
        [Parameter(Mandatory = $true)]
        [string]$LogPath,

        [Parameter(Mandatory = $true)]
        [string]$LogName,

        [Parameter(Mandatory = $true)]
        [string]$ScriptVersion
    )

    Process {
        $sFullPath = $LogPath + "\" + $LogName

        # Check if file exists and delete if it does
        if ((Test-Path -Path $sFullPath)) {
            Remove-Item -Path $sFullPath -Force
        }

        # Create file and start logging
        New-Item -Path $LogPath -Value $LogName -ItemType File

        Add-Content -Path $sFullPath -Value "***************************************************************************************************"
        Add-Content -Path $sFullPath -Value "Started processing at [$([DateTime]::Now)]."
        Add-Content -Path $sFullPath -Value "***************************************************************************************************"
        Add-Content -Path $sFullPath -Value ""
        Add-Content -Path $sFullPath -Value "Running script version [$ScriptVersion]."
        Add-Content -Path $sFullPath -Value ""
        Add-Content -Path $sFullPath -Value "Running with debug mode [$sDebug]."
        Add-Content -Path $sFullPath -Value ""
        Add-Content -Path $sFullPath -Value "***************************************************************************************************"
        Add-Content -Path $sFullPath -Value ""

        # Write to screen for debug mode
        Write-Debug "***************************************************************************************************"
        Write-Debug "Started processing at [$([DateTime]::Now)]."
        Write-Debug "***************************************************************************************************"
        Write-Debug ""
        Write-Debug "Running script version [$ScriptVersion]."
        Write-Debug ""
        Write-Debug "Running with debug mode [$sDebug]."
        Write-Debug ""
        Write-Debug "***************************************************************************************************"
        Write-Debug ""
    }

}

<#
    .SYNOPSIS
      Writes an error to a log file

    .DESCRIPTION
      Writes the passed error to a new line at the end of the specified log file

    .PARAMETER LogPath
      Mandatory. Full path of the log file you want to write to. Example: C:\Windows\Temp\Test_Script.log

    .PARAMETER ErrorDesc
      Mandatory. The description of the error you want to pass (use $_.Exception)

    .PARAMETER ExitGracefully
      Mandatory. Boolean. If set to True, runs Log-Finish and then exits script

    .INPUTS
      Parameters above

    .OUTPUTS
      None
  #>
function Log-Error {

    [CmdletBinding()]

    param (
        [Parameter(Mandatory = $true)]
        [string]$LogPath,

        [Parameter(Mandatory = $true)]
        [string]$ErrorDesc,

        [Parameter(Mandatory = $true)]
        [boolean]$ExitGracefully
    )

    Process {
        Add-Content -Path $LogPath -Value "Error: An error has occurred [$ErrorDesc]."

        # Write to screen for debug mode
        Write-Debug "Error: An error has occurred [$ErrorDesc]."

        # If $ExitGracefully = True then run Log-Finish and exit script
        if ($ExitGracefully -eq $True) {
            Log-Finish -LogPath $LogPath
            Break
        }
    }
}


<#
    .SYNOPSIS
      Write closing logging data & exit

    .DESCRIPTION
      Writes finishing logging data to specified log and then exits the calling script

    .PARAMETER LogPath
      Mandatory. Full path of the log file you want to write finishing data to. Example: C:\Windows\Temp\Script.log

    .PARAMETER NoExit
      Optional. If this is set to True, then the function will not exit the calling script, so that further execution can occur

    .INPUTS
      Parameters above

    .OUTPUTS
      None
  #>
function Log-Finish {

    [CmdletBinding()]

    param (
        [Parameter(Mandatory = $true)]
        [string]$LogPath,

        [Parameter(Mandatory = $false)]
        [string]$NoExit
    )

    Process {
        Add-Content -Path $LogPath -Value ""
        Add-Content -Path $LogPath -Value "***************************************************************************************************"
        Add-Content -Path $LogPath -Value "Finished processing at [$([DateTime]::Now)]."
        Add-Content -Path $LogPath -Value "***************************************************************************************************"
        Add-Content -Path $LogPath -Value ""

        # Write to screen for debug mode
        Write-Debug ""
        Write-Debug "***************************************************************************************************"
        Write-Debug "Finished processing at [$([DateTime]::Now)]."
        Write-Debug "***************************************************************************************************"
        Write-Debug ""

        # Exit calling script if NoExit has not been specified or is set to False
        if (!($NoExit) -or ($NoExit -eq $False)) {
            Exit
        }
    }
}

Log-Start -LogPath $sLogPath -LogName $sLogName -ScriptVersion $sScriptVersion
Main
Log-Finish -LogPath $sLogFile