Created
October 8, 2018 09:32
-
-
Save marvinosswald/1b485600dbefef30fedd2c727ab956f9 to your computer and use it in GitHub Desktop.
Slicer Config for CaliCat
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by Slic3r Prusa Edition 1.41.0+ on 2018-10-08 at 10:08:19 | |
| [print:0.05mm ULTRADETAIL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 10 | |
| bridge_acceleration = 300 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 | |
| complete_objects = 0 | |
| default_acceleration = 500 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 20 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 500 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 800 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.5 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 30 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.05 | |
| max_print_speed = 80 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 300 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 30 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 20 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 30 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.3 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1.5 | |
| support_material_speed = 30 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 20 | |
| top_solid_layers = 15 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.05mm ULTRADETAIL 0.25 nozzle] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 10 | |
| bridge_acceleration = 300 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 | |
| complete_objects = 0 | |
| default_acceleration = 500 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.25 | |
| external_perimeter_speed = 20 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.25 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 500 | |
| first_layer_extrusion_width = 0.25 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 800 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.25 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 20 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.05 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 300 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.25 | |
| perimeter_speed = 20 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.25 | |
| solid_infill_speed = 20 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.2 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 0 | |
| support_material_interface_spacing = 0.15 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1 | |
| support_material_speed = 20 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 150% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.25 | |
| top_solid_infill_speed = 20 | |
| top_solid_layers = 15 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.05mm ULTRADETAIL 0.25 nozzle MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 10 | |
| bridge_acceleration = 300 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 | |
| complete_objects = 0 | |
| default_acceleration = 500 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.25 | |
| external_perimeter_speed = 20 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.25 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 500 | |
| first_layer_extrusion_width = 0.25 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 800 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.25 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 30 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.05 | |
| max_print_speed = 80 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 300 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.25 | |
| perimeter_speed = 30 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 20 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.25 | |
| solid_infill_speed = 30 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.2 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 0 | |
| support_material_interface_spacing = 0.15 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1 | |
| support_material_speed = 30 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 150% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.25 | |
| top_solid_infill_speed = 20 | |
| top_solid_layers = 15 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.05mm ULTRADETAIL MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 10 | |
| bridge_acceleration = 300 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material | |
| complete_objects = 0 | |
| default_acceleration = 500 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 20 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 500 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 20 | |
| gcode_comments = 0 | |
| infill_acceleration = 800 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 30 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.05 | |
| max_print_speed = 80 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 300 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 30 | |
| perimeters = 3 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 20 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 30 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.3 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1.5 | |
| support_material_speed = 30 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 20 | |
| top_solid_layers = 15 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.10mm DETAIL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 7 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 40 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.1 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 50 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 50 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 40 | |
| top_solid_layers = 9 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.10mm DETAIL 0.25 nozzle] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 7 | |
| bridge_acceleration = 600 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.25 | |
| external_perimeter_speed = 20 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.25 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.25 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1600 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.25 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 40 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.1 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 600 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.25 | |
| perimeter_speed = 25 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.25 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.2 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 0 | |
| support_material_interface_spacing = 0.15 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 150% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.25 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 9 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.10mm DETAIL 0.25 nozzle MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 7 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.25 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.25 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.25 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.25 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.1 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.25 | |
| perimeter_speed = 45 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.25 | |
| solid_infill_speed = 200 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.2 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 0 | |
| support_material_interface_spacing = 0.15 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 150% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.25 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 9 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.10mm DETAIL 0.6 nozzle MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 7 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.61 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.67 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.65 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.1 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.65 | |
| perimeter_speed = 45 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.65 | |
| solid_infill_speed = 200 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.55 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.6 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 9 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.10mm DETAIL MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 7 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.1 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 45 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 200 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 9 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.15mm 100mms Linear Advance] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 50 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 100 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 150 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 60 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 100 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 60 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 70 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 40 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 50 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 50 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 40 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL 0.25 nozzle] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 600 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.25 | |
| external_perimeter_speed = 20 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.25 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.25 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1600 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.25 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 40 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 600 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.25 | |
| perimeter_speed = 25 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 15 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.25 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.2 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 0 | |
| support_material_interface_spacing = 0.15 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 150% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.25 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL 0.25 nozzle MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.25 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.25 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.25 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.25 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.25 | |
| perimeter_speed = 45 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.25 | |
| solid_infill_speed = 200 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.2 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 0 | |
| support_material_interface_spacing = 0.15 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 1 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 150% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.25 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL 0.6 nozzle] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.61 | |
| external_perimeter_speed = 40 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.67 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.65 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.65 | |
| perimeter_speed = 50 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.65 | |
| solid_infill_speed = 50 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.55 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.6 | |
| top_solid_infill_speed = 40 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL 0.6 nozzle MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.61 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.67 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.65 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.65 | |
| perimeter_speed = 45 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.65 | |
| solid_infill_speed = 200 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.55 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.6 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 45 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 200 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL MK3 SOLUBLE FULL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 5 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 5 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 1 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL MK3 SOLUBLE INTERFACE] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 5 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL SOLUBLE FULL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 25 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 4 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 4 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 1 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.15mm OPTIMAL SOLUBLE INTERFACE] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 5 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 25 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.15 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 4 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 80% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 7 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.20mm 100mms Linear Advance] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 50 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 100 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 150 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 60 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 100 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 60 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 70 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.20mm FAST 0.6 nozzle MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.61 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.67 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.65 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.65 | |
| perimeter_speed = 45 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.65 | |
| solid_infill_speed = 200 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.55 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.6 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.20mm FAST MK3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 45 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 200 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.20mm FAST MK3 SOLUBLE FULL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 5 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 5 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 1 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.20mm FAST MK3 SOLUBLE INTERFACE] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 35 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = grid | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 200 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 200 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 0 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 5 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.45 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 125 | |
| xy_size_compensation = 0 | |
| [print:0.20mm NORMAL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 40 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 50 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 50 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 40 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.20mm NORMAL 0.6 nozzle] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.61 | |
| external_perimeter_speed = 40 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.67 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.65 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.65 | |
| perimeter_speed = 50 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.65 | |
| solid_infill_speed = 50 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.55 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.6 | |
| top_solid_infill_speed = 40 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.20mm NORMAL SOLUBLE FULL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 30 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 4 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 4 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 1 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.20mm NORMAL SOLUBLE INTERFACE] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 4 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.45 | |
| external_perimeter_speed = 30 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 1250 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.45 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.45 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 4 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 80% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.4 | |
| top_solid_infill_speed = 30 | |
| top_solid_layers = 5 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.35mm FAST] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.95 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.6 | |
| external_perimeter_speed = 40 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.42 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.45 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.35 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.43 | |
| perimeter_speed = 50 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.7 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.35 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.43 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 4 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.35mm FAST 0.6 nozzle] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.61 | |
| external_perimeter_speed = 40 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.67 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.65 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.35 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 0 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.65 | |
| perimeter_speed = 50 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 1 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.65 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0.1 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.55 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 0 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.2 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 0 | |
| support_material_threshold = 55 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 50% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.6 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 4 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.35mm FAST sol full 0.6 nozzle] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.6 | |
| external_perimeter_speed = 30 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.67 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.65 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.35 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.65 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.65 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 4 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 4 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 1 | |
| support_material_xy_spacing = 120% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.57 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 4 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [print:0.35mm FAST sol int 0.6 nozzle] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 1000 | |
| bridge_angle = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 20 | |
| brim_width = 0 | |
| clip_multipart_objects = 1 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 | |
| complete_objects = 0 | |
| default_acceleration = 1000 | |
| dont_support_bridges = 1 | |
| elefant_foot_compensation = 0 | |
| ensure_vertical_shell_thickness = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0.6 | |
| external_perimeter_speed = 30 | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.67 | |
| fill_angle = 45 | |
| fill_density = 20% | |
| fill_pattern = cubic | |
| first_layer_acceleration = 1000 | |
| first_layer_extrusion_width = 0.65 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 20 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 2000 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0.7 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 25% | |
| infill_speed = 60 | |
| inherits = | |
| interface_shells = 0 | |
| layer_height = 0.35 | |
| max_print_speed = 100 | |
| max_volumetric_extrusion_rate_slope_negative = 0 | |
| max_volumetric_extrusion_rate_slope_positive = 0 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 4 | |
| notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}.gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 800 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0.65 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| single_extruder_multi_material_priming = 1 | |
| skirt_distance = 2 | |
| skirt_height = 3 | |
| skirts = 0 | |
| small_perimeter_speed = 25 | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0.65 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_buildplate_only = 0 | |
| support_material_contact_distance = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 0 | |
| support_material_extrusion_width = 0.45 | |
| support_material_interface_contact_loops = 0 | |
| support_material_interface_extruder = 4 | |
| support_material_interface_layers = 2 | |
| support_material_interface_spacing = 0.1 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2 | |
| support_material_speed = 50 | |
| support_material_synchronize_layers = 1 | |
| support_material_threshold = 80 | |
| support_material_with_sheath = 0 | |
| support_material_xy_spacing = 150% | |
| thin_walls = 0 | |
| threads = 8 | |
| top_infill_extrusion_width = 0.57 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 4 | |
| travel_speed = 180 | |
| wipe_tower = 1 | |
| wipe_tower_bridging = 10 | |
| wipe_tower_rotation_angle = 0 | |
| wipe_tower_width = 60 | |
| wipe_tower_x = 170 | |
| wipe_tower_y = 140 | |
| xy_size_compensation = 0 | |
| [filament:ColorFabb Brass Bronze] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1.2 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #804040 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 80.65 | |
| filament_density = 4 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 10 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 210 | |
| [filament:ColorFabb HT] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 10 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 58.66 | |
| filament_density = 1.18 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 105 | |
| first_layer_temperature = 270 | |
| inherits = | |
| max_fan_speed = 20 | |
| min_fan_speed = 10 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 270 | |
| [filament:ColorFabb PLA-PHA] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 55.5 | |
| filament_density = 1.24 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 15 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 210 | |
| [filament:ColorFabb Woodfil] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1.2 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #804040 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 62.9 | |
| filament_density = 1.15 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 10 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 200 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 200 | |
| [filament:ColorFabb XT] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 62.9 | |
| filament_density = 1.27 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 90 | |
| first_layer_temperature = 260 | |
| inherits = | |
| max_fan_speed = 50 | |
| min_fan_speed = 30 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 270 | |
| [filament:ColorFabb XT-CF20] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1.2 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #804040 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 80.65 | |
| filament_density = 1.35 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 1 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 90 | |
| first_layer_temperature = 260 | |
| inherits = | |
| max_fan_speed = 50 | |
| min_fan_speed = 30 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 260 | |
| [filament:ColorFabb nGen] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 40 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 10 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 21.2 | |
| filament_density = 1.2 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = NGEN | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 85 | |
| first_layer_temperature = 240 | |
| inherits = | |
| max_fan_speed = 35 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 240 | |
| [filament:ColorFabb nGen flex] | |
| bed_temperature = 85 | |
| bridge_fan_speed = 40 | |
| compatible_printers = | |
| compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 10 | |
| filament_colour = #00CA0A | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 0 | |
| filament_density = 1 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 5 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = FLEX | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 85 | |
| first_layer_temperature = 260 | |
| inherits = | |
| max_fan_speed = 35 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 260 | |
| [filament:E3D Edge] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 56.9 | |
| filament_density = 1.26 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 85 | |
| first_layer_temperature = 230 | |
| inherits = | |
| max_fan_speed = 50 | |
| min_fan_speed = 30 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 240 | |
| [filament:E3D PC-ABS] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #3A80CA | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 0 | |
| filament_density = 1.05 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 270 | |
| inherits = | |
| max_fan_speed = 30 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 270 | |
| [filament:Fillamentum ABS] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #3A80CA | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 32.4 | |
| filament_density = 1.04 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 240 | |
| inherits = | |
| max_fan_speed = 30 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 240 | |
| [filament:Fillamentum ASA] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #3A80CA | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 38.7 | |
| filament_density = 1.04 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 265 | |
| inherits = | |
| max_fan_speed = 30 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 265 | |
| [filament:Fillamentum CPE HG100 HM100] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 54.1 | |
| filament_density = 1.25 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "CPE HG100 , CPE HM100" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 90 | |
| first_layer_temperature = 275 | |
| inherits = | |
| max_fan_speed = 50 | |
| min_fan_speed = 50 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 275 | |
| [filament:Fillamentum Timberfil] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1.2 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #804040 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 68 | |
| filament_density = 1.15 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 10 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 190 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 190 | |
| [filament:Generic ABS] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #3A80CA | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 27.82 | |
| filament_density = 1.04 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" | |
| filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 255 | |
| inherits = | |
| max_fan_speed = 30 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 255 | |
| [filament:Generic ABS MMU2] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #3A80CA | |
| filament_cooling_final_speed = 50 | |
| filament_cooling_initial_speed = 10 | |
| filament_cooling_moves = 5 | |
| filament_cost = 27.82 | |
| filament_density = 1.08 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" | |
| filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 255 | |
| inherits = | |
| max_fan_speed = 30 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 255 | |
| [filament:Generic PET] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 27.82 | |
| filament_density = 1.24 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 85 | |
| first_layer_temperature = 230 | |
| inherits = | |
| max_fan_speed = 50 | |
| min_fan_speed = 30 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 240 | |
| [filament:Generic PET MMU2] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 1 | |
| filament_cooling_initial_speed = 2 | |
| filament_cooling_moves = 1 | |
| filament_cost = 27.82 | |
| filament_density = 1.27 | |
| filament_diameter = 1.75 | |
| filament_load_time = 12 | |
| filament_loading_speed = 14 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = PET | |
| filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 11 | |
| filament_unloading_speed = 20 | |
| filament_unloading_speed_start = 120 | |
| first_layer_bed_temperature = 85 | |
| first_layer_temperature = 230 | |
| inherits = | |
| max_fan_speed = 50 | |
| min_fan_speed = 30 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 230 | |
| [filament:Generic PLA] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 25.4 | |
| filament_density = 1.27 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 15 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 210 | |
| [filament:Generic PLA MMU2] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 1 | |
| filament_cooling_initial_speed = 2 | |
| filament_cooling_moves = 1 | |
| filament_cost = 25.4 | |
| filament_density = 1.24 | |
| filament_diameter = 1.75 | |
| filament_load_time = 12 | |
| filament_loading_speed = 14 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 15 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
| filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 11 | |
| filament_unloading_speed = 20 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 205 | |
| [filament:Polymaker PC-Max] | |
| bed_temperature = 115 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #3A80CA | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 77.3 | |
| filament_density = 1.2 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 270 | |
| inherits = | |
| max_fan_speed = 30 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 270 | |
| [filament:Primavalue PVA] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FFFFD7 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 108 | |
| filament_density = 1.23 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 10 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH" | |
| filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 1 | |
| filament_toolchange_delay = 0 | |
| filament_type = PVA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 195 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 195 | |
| [filament:Prusa ABS] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #3A80CA | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 27.82 | |
| filament_density = 1.08 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" | |
| filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 255 | |
| inherits = | |
| max_fan_speed = 30 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 255 | |
| [filament:Prusa ABS MMU2] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 30 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #3A80CA | |
| filament_cooling_final_speed = 50 | |
| filament_cooling_initial_speed = 10 | |
| filament_cooling_moves = 5 | |
| filament_cost = 27.82 | |
| filament_density = 1.08 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" | |
| filament_ramming_parameters = "120 110 5.32258 5.45161 5.67742 6 6.48387 7.12903 7.90323 8.70968 9.3871 9.83871 10.0968 10.2258| 0.05 5.30967 0.45 5.50967 0.95 6.1871 1.45 7.39677 1.95 9.05484 2.45 10 2.95 10.3098 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = ABS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 255 | |
| inherits = | |
| max_fan_speed = 30 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 255 | |
| [filament:Prusa HIPS] | |
| bed_temperature = 110 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 0.9 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 10 | |
| filament_colour = #FFFFD7 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 27.3 | |
| filament_density = 1.04 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 11 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 1 | |
| filament_toolchange_delay = 0 | |
| filament_type = HIPS | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 220 | |
| inherits = | |
| max_fan_speed = 20 | |
| min_fan_speed = 20 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 220 | |
| [filament:Prusa PET] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 27.82 | |
| filament_density = 1.27 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 85 | |
| first_layer_temperature = 230 | |
| inherits = | |
| max_fan_speed = 50 | |
| min_fan_speed = 30 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 240 | |
| [filament:Prusa PET MMU2] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 50 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 20 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 1 | |
| filament_cooling_initial_speed = 2 | |
| filament_cooling_moves = 1 | |
| filament_cost = 27.82 | |
| filament_density = 1.27 | |
| filament_diameter = 1.75 | |
| filament_load_time = 12 | |
| filament_loading_speed = 14 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = PET | |
| filament_ramming_parameters = "120 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 11 | |
| filament_unloading_speed = 20 | |
| filament_unloading_speed_start = 120 | |
| first_layer_bed_temperature = 85 | |
| first_layer_temperature = 230 | |
| inherits = | |
| max_fan_speed = 50 | |
| min_fan_speed = 30 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" | |
| temperature = 230 | |
| [filament:Prusa PLA] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 25.4 | |
| filament_density = 1.24 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 15 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 210 | |
| [filament:Prusa PLA MMU2] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 1 | |
| filament_cooling_initial_speed = 2 | |
| filament_cooling_moves = 1 | |
| filament_cost = 25.4 | |
| filament_density = 1.24 | |
| filament_diameter = 1.75 | |
| filament_load_time = 12 | |
| filament_loading_speed = 14 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 15 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
| filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 11 | |
| filament_unloading_speed = 20 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 205 | |
| [filament:Prusament PLA] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 24.99 | |
| filament_density = 1.24 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 15 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 215 | |
| [filament:Prusament PLA MMU2] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material | |
| cooling = 1 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FF3232 | |
| filament_cooling_final_speed = 1 | |
| filament_cooling_initial_speed = 2 | |
| filament_cooling_moves = 1 | |
| filament_cost = 25.4 | |
| filament_density = 1.24 | |
| filament_diameter = 1.75 | |
| filament_load_time = 12 | |
| filament_loading_speed = 14 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 15 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
| filament_ramming_parameters = "120 110 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 11 | |
| filament_unloading_speed = 20 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 205 | |
| [filament:SemiFlex or Flexfill 98A] | |
| bed_temperature = 50 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1.2 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 100 | |
| filament_colour = #00CA0A | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 82 | |
| filament_density = 1.22 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 1.5 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = FLEX | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 50 | |
| first_layer_temperature = 240 | |
| inherits = | |
| max_fan_speed = 90 | |
| min_fan_speed = 70 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 240 | |
| [filament:Taulman Bridge] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 40 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #DEE0E6 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 40 | |
| filament_density = 1.13 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 10 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 240 | |
| inherits = | |
| max_fan_speed = 5 | |
| min_fan_speed = 0 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 250 | |
| [filament:Taulman T-Glase] | |
| bed_temperature = 90 | |
| bridge_fan_speed = 40 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 3 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 20 | |
| filament_colour = #FF8000 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 40 | |
| filament_density = 1.27 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 8 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PET | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 90 | |
| first_layer_temperature = 240 | |
| inherits = | |
| max_fan_speed = 5 | |
| min_fan_speed = 0 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" | |
| temperature = 240 | |
| [filament:Verbatim BVOH] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 0 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FFFFD7 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 218 | |
| filament_density = 1.23 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 4 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 1 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 215 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 210 | |
| [filament:Verbatim BVOH MMU2] | |
| bed_temperature = 60 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material | |
| cooling = 0 | |
| disable_fan_first_layers = 1 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #FFFFD7 | |
| filament_cooling_final_speed = 1 | |
| filament_cooling_initial_speed = 2 | |
| filament_cooling_moves = 1 | |
| filament_cost = 218 | |
| filament_density = 1.23 | |
| filament_diameter = 1.75 | |
| filament_load_time = 12 | |
| filament_loading_speed = 14 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 4 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = BVOH | |
| filament_ramming_parameters = "120 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 1 | |
| filament_toolchange_delay = 0 | |
| filament_type = PVA | |
| filament_unload_time = 11 | |
| filament_unloading_speed = 20 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 60 | |
| first_layer_temperature = 200 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 195 | |
| [filament:Verbatim PP] | |
| bed_temperature = 100 | |
| bridge_fan_speed = 100 | |
| compatible_printers = | |
| compatible_printers_condition = ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material) | |
| cooling = 1 | |
| disable_fan_first_layers = 2 | |
| end_filament_gcode = "; Filament-specific end gcode" | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 100 | |
| filament_colour = #DEE0E6 | |
| filament_cooling_final_speed = 3.4 | |
| filament_cooling_initial_speed = 2.2 | |
| filament_cooling_moves = 4 | |
| filament_cost = 72 | |
| filament_density = 0.89 | |
| filament_diameter = 1.75 | |
| filament_load_time = 0 | |
| filament_loading_speed = 28 | |
| filament_loading_speed_start = 3 | |
| filament_max_volumetric_speed = 5 | |
| filament_minimal_purge_on_wipe_tower = 15 | |
| filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA" | |
| filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" | |
| filament_settings_id = "" | |
| filament_soluble = 0 | |
| filament_toolchange_delay = 0 | |
| filament_type = PLA | |
| filament_unload_time = 0 | |
| filament_unloading_speed = 90 | |
| filament_unloading_speed_start = 100 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 220 | |
| inherits = | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 15 | |
| slowdown_below_layer_time = 20 | |
| start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" | |
| temperature = 220 | |
| [printer:Original Prusa i3 MK2] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.15mm OPTIMAL | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.25 | |
| max_print_height = 200 | |
| min_layer_height = 0.07 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2S | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n | |
| printer_settings_id = | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 0 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2 0.25 nozzle] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.10mm DETAIL 0.25 nozzle | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.1 | |
| max_print_height = 200 | |
| min_layer_height = 0.05 | |
| nozzle_diameter = 0.25 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2S | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n | |
| printer_settings_id = | |
| printer_variant = 0.25 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 0 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 1 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 50 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 0 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2 0.6 nozzle] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.20mm NORMAL 0.6 nozzle | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.35 | |
| max_print_height = 200 | |
| min_layer_height = 0.1 | |
| nozzle_diameter = 0.6 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2S | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n | |
| printer_settings_id = | |
| printer_variant = 0.6 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 0 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2 MM Single Mode] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.15mm OPTIMAL | |
| deretract_speed = 50 | |
| end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.25 | |
| max_print_height = 200 | |
| min_layer_height = 0.07 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2SMM | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN | |
| printer_settings_id = | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 0 | |
| retract_before_travel = 3 | |
| retract_before_wipe = 60% | |
| retract_layer_change = 0 | |
| retract_length = 4 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 80 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 1 | |
| start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.20mm NORMAL 0.6 nozzle | |
| deretract_speed = 50 | |
| end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.25 | |
| max_print_height = 200 | |
| min_layer_height = 0.07 | |
| nozzle_diameter = 0.6 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2SMM | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN | |
| printer_settings_id = | |
| printer_variant = 0.6 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 0 | |
| retract_before_travel = 3 | |
| retract_before_wipe = 60% | |
| retract_layer_change = 0 | |
| retract_length = 4 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 80 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 1 | |
| start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2 MultiMaterial] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.15mm OPTIMAL | |
| deretract_speed = 50,50,50,50 | |
| end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 | |
| extruder_offset = 0x0,0x0,0x0,0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.25,0.25,0.25,0.25 | |
| max_print_height = 200 | |
| min_layer_height = 0.07,0.07,0.07,0.07 | |
| nozzle_diameter = 0.4,0.4,0.4,0.4 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2SMM | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN | |
| printer_settings_id = | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 0 | |
| retract_before_travel = 3,3,3,3 | |
| retract_before_wipe = 60%,60%,60%,60% | |
| retract_layer_change = 0,0,0,0 | |
| retract_length = 4,4,4,4 | |
| retract_length_toolchange = 4,4,4,4 | |
| retract_lift = 0.6,0.6,0.6,0.6 | |
| retract_lift_above = 0,0,0,0 | |
| retract_lift_below = 199,199,199,199 | |
| retract_restart_extra = 0,0,0,0 | |
| retract_restart_extra_toolchange = 0,0,0,0 | |
| retract_speed = 80,80,80,80 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 1 | |
| start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 0 | |
| wipe = 1,1,1,1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.20mm NORMAL 0.6 nozzle | |
| deretract_speed = 50,50,50,50 | |
| end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 | |
| extruder_offset = 0x0,0x0,0x0,0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.25,0.25,0.25,0.25 | |
| max_print_height = 200 | |
| min_layer_height = 0.07,0.07,0.07,0.07 | |
| nozzle_diameter = 0.6,0.6,0.6,0.6 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2SMM | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN | |
| printer_settings_id = | |
| printer_variant = 0.6 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 0 | |
| retract_before_travel = 3,3,3,3 | |
| retract_before_wipe = 60%,60%,60%,60% | |
| retract_layer_change = 0,0,0,0 | |
| retract_length = 4,4,4,4 | |
| retract_length_toolchange = 4,4,4,4 | |
| retract_lift = 0.6,0.6,0.6,0.6 | |
| retract_lift_above = 0,0,0,0 | |
| retract_lift_below = 199,199,199,199 | |
| retract_restart_extra = 0,0,0,0 | |
| retract_restart_extra_toolchange = 0,0,0,0 | |
| retract_speed = 80,80,80,80 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 1 | |
| start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 0 | |
| wipe = 1,1,1,1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2.5] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.15mm OPTIMAL | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.25 | |
| max_print_height = 200 | |
| min_layer_height = 0.07 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2.5 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n | |
| printer_settings_id = | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 1 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.4.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2.5 0.25 nozzle] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.10mm DETAIL 0.25 nozzle | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.1 | |
| max_print_height = 200 | |
| min_layer_height = 0.05 | |
| nozzle_diameter = 0.25 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2.5 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n | |
| printer_settings_id = | |
| printer_variant = 0.25 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 1 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 1 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 50 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.4.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 0 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK2.5 0.6 nozzle] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.20mm NORMAL 0.6 nozzle | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 10000 | |
| machine_max_acceleration_extruding = 2000 | |
| machine_max_acceleration_retracting = 1500 | |
| machine_max_acceleration_x = 9000 | |
| machine_max_acceleration_y = 9000 | |
| machine_max_acceleration_z = 500 | |
| machine_max_feedrate_e = 120 | |
| machine_max_feedrate_x = 500 | |
| machine_max_feedrate_y = 500 | |
| machine_max_feedrate_z = 12 | |
| machine_max_jerk_e = 2.5 | |
| machine_max_jerk_x = 10 | |
| machine_max_jerk_y = 10 | |
| machine_max_jerk_z = 0.2 | |
| machine_min_extruding_rate = 0 | |
| machine_min_travel_rate = 0 | |
| max_layer_height = 0.35 | |
| max_print_height = 200 | |
| min_layer_height = 0.1 | |
| nozzle_diameter = 0.6 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK2.5 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n | |
| printer_settings_id = | |
| printer_variant = 0.6 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 1 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 199 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 0 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.4.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK3] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.15mm OPTIMAL MK3 | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 5000,5000 | |
| machine_max_acceleration_extruding = 1250,1250 | |
| machine_max_acceleration_retracting = 1250,1250 | |
| machine_max_acceleration_x = 1000,960 | |
| machine_max_acceleration_y = 1000,960 | |
| machine_max_acceleration_z = 1000,1000 | |
| machine_max_feedrate_e = 120,120 | |
| machine_max_feedrate_x = 200,100 | |
| machine_max_feedrate_y = 200,100 | |
| machine_max_feedrate_z = 12,12 | |
| machine_max_jerk_e = 1.5,1.5 | |
| machine_max_jerk_x = 8,8 | |
| machine_max_jerk_y = 8,8 | |
| machine_max_jerk_z = 0.4,0.4 | |
| machine_min_extruding_rate = 0,0 | |
| machine_min_travel_rate = 0,0 | |
| max_layer_height = 0.25 | |
| max_print_height = 210 | |
| min_layer_height = 0.07 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK3 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n | |
| printer_settings_id = | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 1 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 209 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 1 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.4.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif} | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK3 0.25 nozzle] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.10mm DETAIL 0.25 nozzle MK3 | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 5000,5000 | |
| machine_max_acceleration_extruding = 1250,1250 | |
| machine_max_acceleration_retracting = 1250,1250 | |
| machine_max_acceleration_x = 1000,960 | |
| machine_max_acceleration_y = 1000,960 | |
| machine_max_acceleration_z = 1000,1000 | |
| machine_max_feedrate_e = 120,120 | |
| machine_max_feedrate_x = 200,100 | |
| machine_max_feedrate_y = 200,100 | |
| machine_max_feedrate_z = 12,12 | |
| machine_max_jerk_e = 1.5,1.5 | |
| machine_max_jerk_x = 8,8 | |
| machine_max_jerk_y = 8,8 | |
| machine_max_jerk_z = 0.4,0.4 | |
| machine_min_extruding_rate = 0,0 | |
| machine_min_travel_rate = 0,0 | |
| max_layer_height = 0.1 | |
| max_print_height = 210 | |
| min_layer_height = 0.05 | |
| nozzle_diameter = 0.25 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK3 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n | |
| printer_settings_id = | |
| printer_variant = 0.25 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 1 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 209 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 1 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.4.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif} | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK3 0.6 nozzle] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 5 | |
| cooling_tube_retraction = 91.5 | |
| default_filament_profile = "Prusament PLA" | |
| default_print_profile = 0.15mm OPTIMAL 0.6 nozzle MK3 | |
| deretract_speed = 0 | |
| end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -2 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 5000,5000 | |
| machine_max_acceleration_extruding = 1250,1250 | |
| machine_max_acceleration_retracting = 1250,1250 | |
| machine_max_acceleration_x = 1000,960 | |
| machine_max_acceleration_y = 1000,960 | |
| machine_max_acceleration_z = 1000,1000 | |
| machine_max_feedrate_e = 120,120 | |
| machine_max_feedrate_x = 200,100 | |
| machine_max_feedrate_y = 200,100 | |
| machine_max_feedrate_z = 12,12 | |
| machine_max_jerk_e = 1.5,1.5 | |
| machine_max_jerk_x = 8,8 | |
| machine_max_jerk_y = 8,8 | |
| machine_max_jerk_z = 0.4,0.4 | |
| machine_min_extruding_rate = 0,0 | |
| machine_min_travel_rate = 0,0 | |
| max_layer_height = 0.35 | |
| max_print_height = 210 | |
| min_layer_height = 0.1 | |
| nozzle_diameter = 0.6 | |
| parking_pos_retraction = 92 | |
| print_host = | |
| printer_model = MK3 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n | |
| printer_settings_id = | |
| printer_variant = 0.6 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 1 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 4 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 209 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 1 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M115 U3.4.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif} | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK3 MMU2] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 10 | |
| cooling_tube_retraction = 30 | |
| default_filament_profile = "Prusament PLA MMU2" | |
| default_print_profile = 0.15mm OPTIMAL MK3 | |
| deretract_speed = 0,0,0,0,0 | |
| end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200; home X axis\nM84 ; disable motors\n | |
| extra_loading_move = -13 | |
| extruder_colour = #FF8000;#0080FF;#00FFFF;#FF4F4F;#9FFF9F | |
| extruder_offset = 0x0,0x0,0x0,0x0,0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 8000,8000 | |
| machine_max_acceleration_extruding = 1250,1250 | |
| machine_max_acceleration_retracting = 1250,1250 | |
| machine_max_acceleration_x = 1000,960 | |
| machine_max_acceleration_y = 1000,960 | |
| machine_max_acceleration_z = 1000,1000 | |
| machine_max_feedrate_e = 120,120 | |
| machine_max_feedrate_x = 200,100 | |
| machine_max_feedrate_y = 200,100 | |
| machine_max_feedrate_z = 12,12 | |
| machine_max_jerk_e = 1.5,1.5 | |
| machine_max_jerk_x = 8,8 | |
| machine_max_jerk_y = 8,8 | |
| machine_max_jerk_z = 0.4,0.4 | |
| machine_min_extruding_rate = 0,0 | |
| machine_min_travel_rate = 0,0 | |
| max_layer_height = 0.25,0.25,0.25,0.25,0.25 | |
| max_print_height = 210 | |
| min_layer_height = 0.07,0.07,0.07,0.07,0.07 | |
| nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 | |
| parking_pos_retraction = 85 | |
| print_host = | |
| printer_model = MK3MMU2 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n | |
| printer_settings_id = | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 1 | |
| retract_before_travel = 1,1,1,1,1 | |
| retract_before_wipe = 0%,0%,0%,0%,0% | |
| retract_layer_change = 1,1,1,1,1 | |
| retract_length = 0.8,0.8,0.8,0.8,0.8 | |
| retract_length_toolchange = 3,3,3,3,3 | |
| retract_lift = 0.6,0.6,0.6,0.6,0.6 | |
| retract_lift_above = 0,0,0,0,0 | |
| retract_lift_below = 209,209,209,209,209 | |
| retract_restart_extra = 0,0,0,0,0 | |
| retract_restart_extra_toolchange = 0,0,0,0,0 | |
| retract_speed = 35,35,35,35,35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 1 | |
| single_extruder_multi_material = 1 | |
| start_gcode = M107\nM115 U3.4.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1,1,1,1,1 | |
| z_offset = 0 | |
| [printer:Original Prusa i3 MK3 MMU2 Single] | |
| bed_shape = 0x0,250x0,250x210,0x210 | |
| before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n | |
| between_objects_gcode = | |
| cooling_tube_length = 10 | |
| cooling_tube_retraction = 30 | |
| default_filament_profile = "Prusament PLA MMU2" | |
| default_print_profile = 0.15mm OPTIMAL MK3 | |
| deretract_speed = 0 | |
| end_gcode = G1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors | |
| extra_loading_move = -13 | |
| extruder_colour = #FFFF00 | |
| extruder_offset = 0x0 | |
| gcode_flavor = marlin | |
| host_type = octoprint | |
| inherits = | |
| layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] | |
| machine_max_acceleration_e = 5000,5000 | |
| machine_max_acceleration_extruding = 1250,1250 | |
| machine_max_acceleration_retracting = 1250,1250 | |
| machine_max_acceleration_x = 1000,960 | |
| machine_max_acceleration_y = 1000,960 | |
| machine_max_acceleration_z = 1000,1000 | |
| machine_max_feedrate_e = 120,120 | |
| machine_max_feedrate_x = 200,100 | |
| machine_max_feedrate_y = 200,100 | |
| machine_max_feedrate_z = 12,12 | |
| machine_max_jerk_e = 1.5,1.5 | |
| machine_max_jerk_x = 8,8 | |
| machine_max_jerk_y = 8,8 | |
| machine_max_jerk_z = 0.4,0.4 | |
| machine_min_extruding_rate = 0,0 | |
| machine_min_travel_rate = 0,0 | |
| max_layer_height = 0.25 | |
| max_print_height = 210 | |
| min_layer_height = 0.07 | |
| nozzle_diameter = 0.4 | |
| parking_pos_retraction = 85 | |
| print_host = | |
| printer_model = MK3MMU2 | |
| printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n | |
| printer_settings_id = | |
| printer_variant = 0.4 | |
| printer_vendor = | |
| printhost_apikey = | |
| printhost_cafile = | |
| remaining_times = 1 | |
| retract_before_travel = 1 | |
| retract_before_wipe = 0% | |
| retract_layer_change = 1 | |
| retract_length = 0.8 | |
| retract_length_toolchange = 3 | |
| retract_lift = 0.6 | |
| retract_lift_above = 0 | |
| retract_lift_below = 209 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 35 | |
| serial_port = | |
| serial_speed = 250000 | |
| silent_mode = 1 | |
| single_extruder_multi_material = 0 | |
| start_gcode = M107\nM115 U3.4.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\nG21 ; set units to millimeters\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT?\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG92 E0.0\n | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 1 | |
| use_volumetric_e = 0 | |
| variable_layer_height = 1 | |
| wipe = 1 | |
| z_offset = 0 | |
| [presets] | |
| print = 0.15mm OPTIMAL MK3 | |
| printer = Original Prusa i3 MK3 | |
| filament = Generic PLA |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment