Last active
January 7, 2024 07:15
-
-
Save matiaspl/1649da91f7132d526a47c42e865cd879 to your computer and use it in GitHub Desktop.
Hacking a Hi3521 ARBCV100 4x1 multiviewer / seamless switcher (see comments!)
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot 2010.06 (Aug 11 2018 - 18:47:37) | |
| Check Flash Memory Controller v100 ... Found | |
| SPI Nor(cs 0) ID: 0xc2 0x20 0x17 | |
| Block:64KB Chip:8MB Name:"MX25L6436F" | |
| SPI Nor total size: 8MB | |
| Cannot found a valid SPI Nand Device | |
| In: serial | |
| Out: serial | |
| Err: serial | |
| Hit any key to stop autoboot: 1 ··· 0 | |
| dev 0 set background color! | |
| jpeg decoding ... | |
| ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ ˇ cmd = ˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇˇ | |
| <<addr=0x7e0000, size=0xd12a, vobuf=0x8ac00000>> | |
| spi_flash 8084d920 | |
| [FILE = jpegd.c LINE = 147] logo flag = 0 | |
| mmu_enable | |
| <<imgwidth=1280, imgheight=720, linebytes=2560>> | |
| decode success!!!! | |
| decode jpeg! | |
| OpenDev vo:0 intf_type:36 out_sync:8 | |
| dev 0 opened! | |
| graphic layer 0 opened! | |
| upgrade flag = 0 | |
| 8192 KiB hi_fmc at 0:0 is now current device | |
| ## Booting kernel from Legacy Image at 82000000 ... | |
| Image Name: Linux-3.10.0 | |
| Image Type: ARM Linux Kernel Image (uncompressed) | |
| Data Size: 4568424 Bytes = 4.4 MiB | |
| Load Address: 80008000 | |
| Entry Point: 80008000 | |
| Loading Kernel Image ... OK | |
| OK | |
| Starting kernel ... | |
| Uncompressing Linux... done, booting the kernel. | |
| Booting Linux on physical CPU 0x0 | |
| Linux version 3.10.0 (root@visual digital-virtual-machine) (gcc version 4.8.3 20131202 (prerelease) (Hisilicon_v400) ) #3 Sat Aug 4 14:13:59 CST 2018 | |
| CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d | |
| CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| Machine: bigfish | |
| Memory policy: ECC disabled, Data cache writeback | |
| CPU: All CPU(s) started in SVC mode. | |
| Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512 | |
| Kernel command line: mem=128M console=ttyAMA0,115200 mtdparts=hi_sfc:384k(uboot),4608K(core),2560K(app),512k(para) | |
| PID hash table entries: 512 (order: -1, 2048 bytes) | |
| Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) | |
| Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) | |
| Memory: 128MB = 128MB total | |
| Memory: 116328k/116328k available, 14744k reserved, 0K highmem | |
| Virtual kernel memory layout: | |
| vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
| vmalloc : 0xc8800000 - 0xff000000 ( 872 MB) | |
| lowmem : 0xc0000000 - 0xc8000000 ( 128 MB) | |
| pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
| modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
| .text : 0xc0008000 - 0xc052ba9c (5263 kB) | |
| .init : 0xc052c000 - 0xc0ce89f4 (7923 kB) | |
| .data : 0xc0cea000 - 0xc0d1e320 ( 209 kB) | |
| .bss : 0xc0d1e320 - 0xc0d3fee8 ( 135 kB) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
| NR_IRQS:128 | |
| GIC CPU mask not found - kernel will fail to boot. | |
| GIC CPU mask not found - kernel will fail to boot. | |
| sched_clock: 32 bits at 62MHz, resolution 16ns, wraps every 68719ms | |
| Console: colour dummy device 80x30 | |
| Calibrating delay loop... 2190.54 BogoMIPS (lpj=10952704) | |
| pid_max: default: 32768 minimum: 301 | |
| Mount-cache hash table entries: 512 | |
| Initializing cgroup subsys freezer | |
| CPU: Testing write buffer coherency: ok | |
| Setting up static identity map for 0xc03d0f98 - 0xc03d0ff0 | |
| NET: Registered protocol family 16 | |
| DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
| hw-breakpoint: maximum watchpoint size is 8 bytes. | |
| Serial: AMBA PL011 UART driver | |
| uart:0: ttyAMA0 at MMIO 0x12080000 (irq = 38) is a PL011 rev2 | |
| console [ttyAMA0] enabled | |
| uart:1: ttyAMA1 at MMIO 0x12090000 (irq = 39) is a PL011 rev2 | |
| uart:2: ttyAMA2 at MMIO 0x120a0000 (irq = 40) is a PL011 rev2 | |
| bio: create slab <bio-0> at 0 | |
| SCSI subsystem initialized | |
| hi-spi-master hi-spi-master.0: with 2 chip select slaves attached | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| Switching to clocksource timer0 | |
| NET: Registered protocol family 2 | |
| TCP established hash table entries: 1024 (order: 1, 8192 bytes) | |
| TCP bind hash table entries: 1024 (order: 0, 4096 bytes) | |
| TCP: Hash tables configured (established 1024 bind 1024) | |
| TCP: reno registered | |
| UDP hash table entries: 256 (order: 0, 4096 bytes) | |
| UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
| NET: Registered protocol family 1 | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| NetWinder Floating Point Emulator V0.97 (double precision) | |
| CPU PMU: probing PMU on CPU 0 | |
| hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available | |
| VFS: Disk quotas dquot_6.5.2 | |
| Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
| fuse init (API version 7.22) | |
| SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled | |
| msgmni has been set to 227 | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) | |
| io scheduler noop registered | |
| io scheduler deadline registered (default) | |
| io scheduler cfq registered | |
| brd: module loaded | |
| loop: module loaded | |
| hiahci: initializing | |
| ahci ahci.0: can't get clock | |
| ahci: SSS flag set, parallel bus scan disabled | |
| ahci ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode | |
| ahci ahci.0: flags: ncq sntf stag pm led clo only pmp fbs slum part ccc sxs boh | |
| scsi0 : ahci_platform | |
| scsi1 : ahci_platform | |
| ata1: SATA max UDMA/133 mmio [mem 0x11010000-0x1101ffff] port 0x100 irq 49 | |
| ata2: SATA max UDMA/133 mmio [mem 0x11010000-0x1101ffff] port 0x180 irq 49 | |
| Check Flash Memory Controller v100 ... Found. | |
| SPI Nor(cs 0) ID: 0xc2 0x20 0x17 | |
| Block:64KB Chip:8MB Name:"MX25L6436F" | |
| SPI Nor total size: 8MB | |
| 4 cmdlinepart partitions found on MTD device hi_sfc | |
| 4 cmdlinepart partitions found on MTD device hi_sfc | |
| Creating 4 MTD partitions on "hi_sfc": | |
| 0x000000000000-0x000000060000 : "uboot" | |
| 0x000000060000-0x0000004e0000 : "core" | |
| 0x0000004e0000-0x000000760000 : "app" | |
| 0x000000760000-0x0000007e0000 : "para" | |
| SPI Nand ID Table Version 2.2 | |
| Cannot found a valid SPI Nand Device | |
| Higmac dma_sg_phy: 0x86f00000 | |
| libphy: higmac_mdio_bus: probed | |
| PHY mdio0:01 not found | |
| ETH0: rmii, phy_addr=1, mii_name=mdio0 | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| before uhci_hcd and ohci_hcd, not after | |
| hiusb-ehci hiusb-ehci.0: HIUSB EHCI | |
| hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1 | |
| hiusb-ehci hiusb-ehci.0: irq 51, io mem 0x10040000 | |
| hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 2 ports detected | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| hiusb-ohci hiusb-ohci.0: HIUSB OHCI | |
| hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2 | |
| hiusb-ohci hiusb-ohci.0: irq 50, io mem 0x10030000 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 2 ports detected | |
| usbcore: registered new interface driver usb-storage | |
| mousedev: PS/2 mouse device common for all mice | |
| ata1: SATA link down (SStatus 0 SControl 300) | |
| i2c /dev entries driver | |
| hisi_i2c hisi_i2c.0: Hisilicon [i2c-0] probed! | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| oprofile: using timer interrupt. | |
| TCP: cubic registered | |
| NET: Registered protocol family 17 | |
| VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | |
| ˇata2: SATA link down (SStatus 0 SControl 300) | |
| Freeing unused kernel memory: 7920K (c052c000 - c0ce8000) | |
| [RCS]: /etc/init.d/S00devs | |
| [RCS]: /etc/init.d/S01udev | |
| udevd (644): /proc/644/oom_adj is deprecated, please use /proc/644/oom_score_adj instead. | |
| [RCS]: /etc/init.d/S80network | |
| [RCS]: /etc/init.d/S90init | |
| modules/ | |
| modules/hi3521a_chnl.ko | |
| modules/hi3521a_ai.ko | |
| modules/hi_rtc.ko | |
| modules/hiuser.ko | |
| modules/hi3521a_jpege.ko | |
| modules/hi3521a_venc.ko | |
| modules/hi3521a_region.ko | |
| modules/pinmux_hi3521a_vga_hdmi_spi.sh | |
| modules/hi3521a_aenc.ko | |
| modules/hi_media.ko | |
| modules/hi3521a_adec.ko | |
| modules/hi3521a_vfmw.ko | |
| modules/hi3521a_ao.ko | |
| modules/pinmux_hi3521a_vicap.sh | |
| modules/load3521a | |
| modules/extdrv/ | |
| modules/extdrv/sii1i2c.ko | |
| modules/extdrv/i2c_phys.ko | |
| modules/extdrv/gpio.ko | |
| modules/extdrv/hi_ir.ko | |
| modules/extdrv/sii0i2c.ko | |
| modules/extdrv/sii3i2c.ko | |
| modules/extdrv/sii2i2c.ko | |
| modules/extdrv/hdmii2c.ko | |
| modules/hi3521a_vdec.ko | |
| modules/sysctl_hi3521a_asic.sh | |
| modules/hi3521a_vou.ko | |
| modules/hi3521a_ive.ko | |
| modules/hi3521a_rc.ko | |
| modules/crgctrl_hi3521a.sh | |
| modules/hi3521a_hdmi.ko | |
| modules/hi3521a_vpss.ko | |
| modules/hi3521a_aio.ko | |
| modules/hi3521a_jpegd.ko | |
| modules/hi3521a_viu.ko | |
| modules/hi3521a_h264e.ko | |
| modules/hi3521a_vgs.ko | |
| modules/hifb.ko | |
| modules/hi3521a_tde.ko | |
| modules/hi3521a_vda.ko | |
| modules/pinmux_hi3521a_i2s.sh | |
| modules/hi3521a_base.ko | |
| modules/hi3521a_sys.ko | |
| modules/mmz.ko | |
| Hisilicon Media Memory Zone Manager | |
| Module himedia: init ok | |
| hi3521a_base: module license 'Proprietary' taints kernel. | |
| Disabling lock debugging due to kernel taint | |
| load sys.ko for Hi3521A...OK! | |
| load vdec.ko ....OK | |
| load vhd firmware.ko OK | |
| Load hi_jpegdec.ko success.·(SDK_VERSION:[SDK_VERSION] Build Time:[Jan 13 2017, 18:19:19]) | |
| Load hi_tde.ko success.··(SDK_VERSION:[SDK_VERSION] Build Time:[Jan 13 2017, 18:19:06]) | |
| load region.ko ....OK! | |
| load vgs.ko for Hi3521A...OK! | |
| load viu.ko ...OK! | |
| load vpss.ko ....OK! | |
| load vou.ko ....OK! | |
| load hdmi.ko ....OK! | |
| load rc.ko for Hi3521A...OK! | |
| load venc.ko for Hi3521A...OK! | |
| load chnl.ko for Hi3521A...OK! | |
| load h264e.ko for Hi3521A...OK! | |
| load jpege.ko for Hi3521A...OK! | |
| load vda.ko ....OK! | |
| load ive.ko ... OK! | |
| KERN_INFO OSDRV_MODULE_VERSION_STRING | |
| HISI_IRDA-MF @Hi3518v100R001 | |
| hiir: init ok. ver=Aug 3 2018, 23:11:54. | |
| KERN_INFO OSDRV_MODULE_VERSION_STRING | |
| KERN_INFO OSDRV_MODULE_VERSION_STRING | |
| KERN_INFO OSDRV_MODULE_VERSION_STRING | |
| KERN_INFO OSDRV_MODULE_VERSION_STRING | |
| load ai.ko for Hi3521A...OK! | |
| load ao.ko for Hi3521A...OK! | |
| load aenc.ko for Hi3521A...OK! | |
| load adec.ko for Hi3521A...OK! | |
| www/ | |
| www/Reboot.html | |
| www/Reset.html | |
| www/SystemUpdate.html | |
| www/images/ | |
| www/images/b.png | |
| www/images/bg-login-top.png | |
| www/images/exclamation.png | |
| www/images/bg-button-green.gif | |
| www/images/cross.png | |
| www/images/bg-body.gif | |
| www/images/jquery_wysiwyg.gif | |
| www/images/bg-sidebar.gif | |
| www/images/tick_circle.png | |
| www/images/bg-form-field.gif | |
| www/images/br.png | |
| www/images/bl.png | |
| www/images/Thumbs.db | |
| www/images/bullet_black.png | |
| www/images/bg-login.gif | |
| www/images/cross_circle.png | |
| www/images/bg-radial-gradient.gif | |
| www/images/tl.png | |
| www/images/shortcut-button-bg.gif | |
| www/images/hammer_screwdriver.png | |
| www/images/bg-menu-item-green.gif | |
| www/images/bg-menu-item-current.gif | |
| www/images/loading.gif | |
| www/images/bg-content-box.gif | |
| www/images/information.png | |
| www/images/tr.png | |
| www/images/cross_grey_small.png | |
| www/images/logo.png | |
| www/images/menu-current-arrow.gif | |
| www/css/ | |
| www/css/jquery.percentageloader-0.1.css | |
| www/css/reset.css | |
| www/css/style.css | |
| www/css/invalid.css | |
| www/connect.html | |
| www/SetPassword.html | |
| www/SetNet.html | |
| www/index.html | |
| www/setBaudRate.html | |
| www/js/ | |
| www/js/jquery.percentageloader-0.1.js | |
| www/js/simpla.jquery.configuration.js | |
| www/js/jquery-1.4.1.min.js | |
| www/js/ajaxfileupload.js | |
| www/js/jquery-1.3.2.min.js | |
| www/js/getagain.js | |
| www/js/jquery.wysiwyg.js | |
| www/OutputP1Main.html | |
| lib/ | |
| lib/libcommonlib.so | |
| lib/libAPI.so | |
| lib/libLRCF.so | |
| bin/ | |
| bin/webserver | |
| bin/SII9293A1 | |
| bin/FWUpgrade | |
| bin/IFrameVieoNet.h264 | |
| bin/SII9293A2 | |
| bin/lighttpd | |
| bin/SII9293A0 | |
| bin/DevMsg | |
| bin/MediaServer | |
| bin/ddnsclient | |
| bin/DisPlay | |
| bin/IFrameVieoLoss.h264 | |
| bin/WatchDog | |
| bin/SII9293A3 | |
| *** Board tools : ver0.0.1_20130123 *** | |
| [debug]: {source/utils/cmdshell.c:166}cmdstr:himm | |
| 0x120f0184: 0x00000001 --> 0x00000000 | |
| [END] | |
| *** Board tools : ver0.0.1_20130123 *** | |
| [debug]: {source/utils/cmdshell.c:166}cmdstr:himm | |
| 0x120f0188: 0x00000001 --> 0x00000000 | |
| [END] | |
| *** Board tools : ver0.0.1_20130123 *** | |
| [debug]: {source/utils/cmdshell.c:166}cmdstr:himm | |
| 0x120f00e0: 0x00000001 --> 0x00000000 | |
| [END] | |
| *** Board tools : ver0.0.1_20130123 *** | |
| [debug]: {source/utils/cmdshell.c:166}cmdstr:himm | |
| 0x120f00e4: 0x00000001 --> 0x00000000 | |
| [END] | |
| *** Board tools : ver0.0.1_20130123 *** | |
| [debug]: {source/utils/cmdshell.c:166}cmdstr:himm | |
| 0x120f017c: 0x00000001 --> 0x00000001 | |
| [END] | |
| *** Board tools : ver0.0.1_20130123 *** | |
| [debug]: {source/utils/cmdshell.c:166}cmdstr:himm | |
| 0x120f0180: 0x00000001 --> 0x00000001 | |
| [END] | |
| *** Board tools : ver0.0.1_20130123 *** | |
| [debug]: {source/utils/cmdshell.c:166}cmdstr:himm | |
| 0x120f00ac: 0x00000002 --> 0x00000001 | |
| [END] | |
| Please press Enter to activate this console. 1970-01-01 00:00:03.000 [WATCH_DOG CWatchdog.cpp:56]get msg qeue msgid:0 | |
| 1970-01-01 00:00:03.000 [WATCH_DOG main.cpp:50]wang wang wang ! | |
| 1970-01-01 00:00:03.000 [WATCH_DOG CWatchdogConfig.cpp:91]read name is TX | |
| 1970-01-01 00:00:03.000 [WATCH_DOG CWatchdogConfig.cpp:100]Product is Tx | |
| 1970-01-01 00:00:03.000 [WATCH_DOG CWatchdog.cpp:77]get process:SII9293A0 | |
| 1970-01-01 00:00:03.000 [WATCH_DOG CWatchdog.cpp:77]get process:SII9293A1 | |
| 1970-01-01 00:00:03.000 [WATCH_DOG CWatchdog.cpp:77]get process:SII9293A2 | |
| 1970-01-01 00:00:03.000 [WATCH_DOG CWatchdog.cpp:77]get process:SII9293A3 | |
| 1970-01-01 00:00:03.000 [WATCH_DOG CWatchdog.cpp:77]get process:DisPlay | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:369]kill sub process:SII9293A0 fail | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:371]killed sub process:SII9293A0, pid:54188 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:270][ startSubProcess name:/var/bin/SII9293A0, param:(null) ] | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:279]Create child:1008 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:369]kill sub process:SII9293A1 fail | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:371]killed sub process:SII9293A1, pid:54188 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:270][ startSubProcess name:/var/bin/SII9293A1, param:(null) ] | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:279]Create child:1009 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:369]kill sub process:SII9293A2 fail | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:371]killed sub process:SII9293A2, pid:54188 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:270][ startSubProcess name:/var/bin/SII9293A2, param:(null) ] | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:279]Create child:1010 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:369]kill sub process:SII9293A3 fail | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:371]killed sub process:SII9293A3, pid:54188 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:270][ startSubProcess name:/var/bin/SII9293A3, param:(null) ] | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:279]Create child:1011 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:369]kill sub process:DisPlay fail | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:371]killed sub process:DisPlay, pid:54188 | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:270][ startSubProcess name:/var/bin/DisPlay, param:(null) ] | |
| 1970-01-01 00:00:05.000 [WATCH_DOG CWatchdog.cpp:279]Create child:1012 | |
| sii9293drv driver starting! | |
| Version: CP5293-v1.00.00 | |
| Build: 16:34:53-Aug 21 2018 | |
| register_chrdev 9293 addr = 1 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:201]Get Video Index = 0 | |
| write head info error or more of User count = 0datasize = 1024 dataoffset = 4096 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:76]Starting sii-9293 | |
| sii9293drv driver starting! | |
| Version: CP5293-v1.00.00 | |
| Build: 16:35:04-Aug 21 2018 | |
| register_chrdev 9293 addr = 2 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:201]Get Video Index = 0 | |
| write head info error or more of User count = 0datasize = 1024 dataoffset = 4096 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:76]Starting sii-9293 | |
| sii9293drv driver starting! | |
| Version: CP5293-v1.00.00 | |
| Build: 16:35:15-Aug 21 2018 | |
| register_chrdev 9293 addr = 3 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:201]Get Video Index = 0 | |
| write head info error or more of User count = 0datasize = 1024 dataoffset = 4096 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:76]Starting sii-9293 | |
| sii9293drv driver starting! | |
| Version: CP5293-v1.00.00 | |
| Build: 16:34:42-Aug 21 2018 | |
| register_chrdev 9293 addr = 0 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:201]Get Video Index = 0 | |
| write head info error or more of User count = 0datasize = 1024 dataoffset = 4096 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:76]Starting sii-9293 | |
| 1970-01-01 00:00:05.000 [DISPLAY main.cpp:52]feed dog now!!! | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:123]Device ID: 9293 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:124]Device Revision: 01 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_evita.c:77]#################read 4A = 0x0 60 = 0xff | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:123]Device ID: 9293 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:124]Device Revision: 01 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_evita.c:77]#################read 4A = 0x0 60 = 0xff | |
| =======================================id= 10 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:123]Device ID: 9293 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:124]Device Revision: 01 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_evita.c:77]#################read 4A = 0x0 60 = 0xff | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:123]Device ID: 9293 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:124]Device Revision: 01 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_evita.c:77]#################read 4A = 0x0 60 = 0xff | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_rx.c:248]SII9293 OUT sysn mode = 0xf0 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_rx.c:248]SII9293 OUT sysn mode = 0xf0 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_rx.c:248]SII9293 OUT sysn mode = 0xf0 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_rx.c:248]SII9293 OUT sysn mode = 0xf0 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_rx_audio.c:287]RX Audio: Fs code = 01 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_rx_audio.c:287]RX Audio: Fs code = 01 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_rx_audio.c:287]RX Audio: Fs code = 01 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_rx_audio.c:287]RX Audio: Fs code = 01 | |
| 1970-01-01 00:00:05.000 [DISPLAY si_rx_audio.c:351]update audio info restart now | |
| 1970-01-01 00:00:05.000 [DISPLAY si_rx_audio.c:351]update audio info restart now | |
| 1970-01-01 00:00:05.000 [DISPLAY si_rx_audio.c:351]update audio info restart now | |
| 1970-01-01 00:00:05.000 [DISPLAY si_rx_audio.c:351]update audio info restart now | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:354]state is not chage ID: 1 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:354]state is not chage ID: 2 | |
| 1970-01-01 00:00:05.000 [LRCF · LRcfServerT.hpp:209]setTask NOW !!! MaxTask = 5 StackSize = 51200 | |
| 1970-01-01 00:00:05.000 [LRCF · LRcfServerT.hpp:228]Start LRCF NOW !!! Link = /tmp/.LRCFCodec | |
| 1970-01-01 00:00:05.000 [LRCF · LRcfServer.cpp:36]setTask NOW !!! MaxTask = 5 StackSize = 51200 | |
| 1970-01-01 00:00:05.000 [LRCF · LRcfServer.cpp:54]Start LRCF NOW !!! Link = /tmp/.LRCFCodec | |
| 1970-01-01 00:00:05.000 [LRCF · Sock.cpp:123]Start SetServer NOW !!! Link = /tmp/.LRCFCodec | |
| 1970-01-01 00:00:05.000 [LRCF · Sock.cpp:217]SERVER link = /tmp/.LRCFCodec CLicet link = sock = 6 | |
| 1970-01-01 00:00:05.000 [LRCF · Sock.cpp:217]SERVER link = /tmp/.LRCFCodec CLicet link = sock = 6 | |
| 1970-01-01 00:00:05.000 [LRCF · ThreadPool.cpp:24]ThreadPool Num:5, stack:51200 | |
| 1970-01-01 00:00:05.000 [DISPLAY CDisPlay.cpp:254]PIC LEN = 14429 | |
| 1970-01-01 00:00:05.000 [DISPLAY CDisPlay.cpp:266]PIC LEN = 10204 | |
| 1970-01-01 00:00:05.000 [DISPLAY Dconfig.cpp:61]load config from /mnt/mtd/app/config/DisPlayConfig.ini | |
| datasize = 1024 dataoffset = 4096 | |
| datasize = 1024 dataoffset = 4096 | |
| datasize = 1024 dataoffset = 4096 | |
| datasize = 1024 dataoffset = 4096 | |
| 1970-01-01 00:00:05.000 [DISPLAY CDisPlay.cpp:421]can not get input0 res Use Default | |
| 1970-01-01 00:00:05.000 [DISPLAY CDisPlay.cpp:421]can not get input0 res Use Default | |
| 1970-01-01 00:00:05.000 [DISPLAY CDisPlay.cpp:421]can not get input0 res Use Default | |
| 1970-01-01 00:00:05.000 [DISPLAY CDisPlay.cpp:421]can not get input0 res Use Default | |
| 1970-01-01 00:00:05.000 [DISPLAY CDisPlay.cpp:544]init 0x1f663b0 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:354]state is not chage ID: 0 | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:354]state is not chage ID: 3 | |
| 1970-01-01 00:00:05.000 [LRCF · ThreadPool.cpp:65]Start worker thread tid:-1238885280 | |
| 1970-01-01 00:00:05.000 [LRCF · ThreadPool.cpp:65]Start worker thread tid:-1238832032 | |
| 1970-01-01 00:00:05.000 [LRCF · ThreadPool.cpp:65]Start worker thread tid:-1238778784 | |
| 1970-01-01 00:00:05.000 [LRCF · ThreadPool.cpp:65]Start worker thread tid:-1238725536 | |
| 1970-01-01 00:00:05.000 [LRCF · ThreadPool.cpp:65]Start worker thread tid:-1238672288 | |
| 1970-01-01 00:00:05.000 [DISPLAY hAudio.cpp:271]Ai(0,0) bind to AencChn:0 ok! | |
| 1970-01-01 00:00:05.000 [DISPLAY hAudio.cpp:271]Ai(0,1) bind to AencChn:1 ok! | |
| 1970-01-01 00:00:05.000 [CODEC hAVi.cpp:205]create VI success!!! | |
| 1970-01-01 00:00:05.000 [CODEC hAVi.cpp:205]create VI success!!! | |
| 1970-01-01 00:00:05.000 [CODEC hAVi.cpp:205]create VI success!!! | |
| 1970-01-01 00:00:05.000 [CODEC hAVi.cpp:205]create VI success!!! | |
| 1970-01-01 00:00:05.000 [DISPLAY hSys.cpp:41]SysBind[16-0-0]:[7-3-2] | |
| 1970-01-01 00:00:05.000 [DISPLAY hSys.cpp:41]SysBind[16-1-4]:[7-2-2] | |
| 1970-01-01 00:00:05.000 [DISPLAY hSys.cpp:41]SysBind[16-2-8]:[7-1-2] | |
| 1970-01-01 00:00:05.000 [DISPLAY hSys.cpp:41]SysBind[16-3-12]:[7-0-2] | |
| 1970-01-01 00:00:05.000 [DISPLAY hWnd.cpp:158]DisableHdmi err ret = 0xa0288004 | |
| 1970-01-01 00:00:05.000 [DISPLAY hWnd.cpp:691]enIntfSync = 12 | |
| 1970-01-01 00:00:05.000 [DISPLAY hWnd.cpp:72]InitDev >>><<< w:1920 h:1080 frmt = 60 | |
| 1970-01-01 00:00:05.000 [DISPLAY hWnd.cpp:123]EnableHdmi ...... | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:403]state is no source connected | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:316]Cable connection change: cable out | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:403]state is no source connected | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:316]Cable connection change: cable out | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:403]state is no source connected | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:316]Cable connection change: cable out | |
| 1970-01-01 00:00:05.000 [DISPLAY mhl_linuxdrv_main.c:403]state is no source connected | |
| 1970-01-01 00:00:05.000 [DISPLAY si_drv_device.c:316]Cable connection change: cable out | |
| 1970-01-01 00:00:06.000 [DISPLAY hWnd.cpp:339]display RGB flag = 0 | |
| 1970-01-01 00:00:06.000 [DISPLAY hAudio.cpp:648]bind is ok ao ch = 0 adchn = 0 AoDev = 1 | |
| 1970-01-01 00:00:06.000 [DISPLAY CDisPlay.cpp:606]clear uboot buf | |
| 1970-01-01 00:00:06.000 [DISPLAY hAudio.cpp:119]enSample rate = 48000 | |
| 1970-01-01 00:00:06.000 [DISPLAY hAudio.cpp:393]clk = 2 | |
| 1970-01-01 00:00:06.000 [DISPLAY hWnd.cpp:691]enIntfSync = 12 | |
| 1970-01-01 00:00:06.000 [CODEC hWnd.cpp:1026]vo display x = 0 y = 0 w = 1920 h = 1080 mode = 5 i = 0 | |
| 1970-01-01 00:00:06.000 [CODEC hWnd.cpp:1227]^_^ @ ^_^ [x-0, y-0, w-1440, h-1080] [dev:0 ch:0] | |
| 1970-01-01 00:00:06.000 [DISPLAY hWnd.cpp:1295]SetChnFrameRate Dev:0 Chn:0 frmt:30 err ret = 0xa00f804a | |
| 1970-01-01 00:00:06.000 [CODEC hWnd.cpp:1026]vo display x = 0 y = 0 w = 1920 h = 1080 mode = 5 i = 1 | |
| 1970-01-01 00:00:06.000 [CODEC hWnd.cpp:1227]^_^ @ ^_^ [x-1440, y-0, w-480, h-360] [dev:0 ch:1] | |
| 1970-01-01 00:00:06.000 [DISPLAY hWnd.cpp:1295]SetChnFrameRate Dev:0 Chn:1 frmt:30 err ret = 0xa00f804a | |
| 1970-01-01 00:00:06.000 [CODEC hWnd.cpp:1026]vo display x = 0 y = 0 w = 1920 h = 1080 mode = 5 i = 2 | |
| 1970-01-01 00:00:06.000 [CODEC hWnd.cpp:1227]^_^ @ ^_^ [x-1440, y-360, w-480, h-360] [dev:0 ch:2] | |
| 1970-01-01 00:00:06.000 [DISPLAY hWnd.cpp:1295]SetChnFrameRate Dev:0 Chn:2 frmt:30 err ret = 0xa00f804a | |
| 1970-01-01 00:00:06.000 [CODEC hWnd.cpp:1026]vo display x = 0 y = 0 w = 1920 h = 1080 mode = 5 i = 3 | |
| 1970-01-01 00:00:06.000 [CODEC hWnd.cpp:1227]^_^ @ ^_^ [x-1440, y-720, w-480, h-360] [dev:0 ch:3] | |
| 1970-01-01 00:00:06.000 [DISPLAY hWnd.cpp:1295]SetChnFrameRate Dev:0 Chn:3 frmt:30 err ret = 0xa00f804a | |
| 1970-01-01 00:00:06.000 [DISPLAY hSys.cpp:41]SysBind[7-1-3]:[15-0-0] | |
| 1970-01-01 00:00:06.000 [DISPLAY hSys.cpp:41]SysBind[7-2-3]:[15-0-1] | |
| 1970-01-01 00:00:06.000 [DISPLAY hSys.cpp:41]SysBind[7-3-3]:[15-0-2] | |
| 1970-01-01 00:00:06.000 [DISPLAY hSys.cpp:41]SysBind[7-0-3]:[15-0-3] | |
| 1970-01-01 00:00:06.000 [DISPLAY CDisPlay.cpp:1233]SET VOIDE MODE IS 14 | |
| 1970-01-01 00:00:06.000 [DISPLAY hAudio.cpp:119]enSample rate = 44100 | |
| 1970-01-01 00:00:06.000 [DISPLAY hAudio.cpp:393]clk = 1 | |
| 1970-01-01 00:00:07.000 [DISPLAY hWnd.cpp:339]display RGB flag = 0 | |
| 1970-01-01 00:00:07.000 [DISPLAY CDisPlay.cpp:1270]open /dev/ttyAMA1 is ok fd = 58 | |
| (none) login: |
Thanks a lot for your reply matiaspl,
finally i have find a way to mount my passwd so i have root access :-D
I doesen't have find a way to stream the video for now but i have telnet access :-D
Best Regards
Stefano
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hi @wes1993, I somehow missed your message.
The ❌'es in your /etc/passwd file suggests that there's also an /etc/shadow present, so you might check if there's a known hash there.
The hash in your passwd- file (md5crypt type hash) has been seen online: https://forums.hak5.org/topic/38353-embedded-device-password-cracking/ so it's likely the camera uses a more or less known password.
Even if it's not, feel free to use my hash and known password and try to fin a way to alter the contents of the passwd (hopfully you will find a script ran on startup on a writable - or remountable as rw - filesystem as I did. And changing the password is as easy as rewriting the contents of /etc/passwd or/etc/shadow. You can use echo for that purpose.