Lenovo G510 High Sierra Notes

Lenovo G510 High Sierra Notes.md

Checklist:

• ✅ WIFI
• ✅ Ethernet
• ✅ Display
• ✅ Touchpad
• ✅ USB (2 & 3)
• ❓ HDMI (Video works, haven't bothered to fix audio yet)
• ✅ Sleep
• ✅ Audio (No microphone)

---

config.plist:

• Added fix for volume control in menu bar being out of sync with system volume
• Added AppleBacklight.kext patch as per Rehabman's adding backlight control guide)
• Added fix for hang/pause/interruptions on login / wake from sleep
• Also added EDID injection as needed to fix banded gradients
• SortedOrder needed as we're using custom SSDTs...
• Added custom SSDT for USBInjectAll.kext to end of SorderOrder

Clover/ACPI:

DSDT Patches:

• "Remove _DSM methods"
• "Rename GFX0 to IGPU"
• "Fix _WAK Arg0 v2"
• "HPET Fix"
• "SMBUS Fix"
• "RTC Fix"
• "OS Check Fix"
• "Fix Mutex with non-zero SyncLevel"
• "Add IMEI"
• "Haswell LPC"
• "7-series/8-series USB"
• "USB _PRW 0x0D (instant wake)"

• Patches generated by AppleHDA Patcher for working audio

SSDT:

• SSDT.aml (generated per RehabMan's Native Power Management guide)
• SSDT-PNLF.aml (generated per RehabMan's adding backlight control guide, make sure to define SortedOrder in config.plist)
• SSDT-UIAC.dsl (generated per RehabMan's creating an SSDT for USBInjectAll.kext guide, make sure to add SSDT to end of SorderOrder in config.plist)

Kexts installed at EFI/CLOVER/kexts/Other:

• AtherosE2200Ethernet.kext
• FakeSMC.kext
• USBInjectAll.kext
• VoodooPS2Controller.kext

Kexts installed at /S/L/E:

• AtherosE2200Ethernet.kext
• FakePCIID_Intel_HD_Graphics.kext
• FakePCIID.kext
• FakeSMC.kext
• IntelGraphicsFixup.kext
• Lilu.kext
• USBInjectAll.kext
• VoodooPS2Controller.kext
• ACPIBatteryManager.kext
• FakePCIID_AR9280_as_BCM943142HM.kext (custom, by me)
• aDummyHDA.kext (generated by AppleHDA Patcher)

Kexts installed at /L/E:

• AppleBacklightInjector.kext (added as per RehabMan's backlight guide)

@zhanser1k

I responded to your message on Twitter, btw:

Hi! This is the forum I used to get my installation up and running. Check out the guides at the top, they'll have all the info you need. https://www.tonymacx86.com/forums/high-sierra-laptop-support.192/ …

For setting up the installer USB, start with this guide: https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/ …

I recommend using my notes here as a reference in case you get stuck, but not copying them verbatim - my hardware is likely slightly different from yours, and if you make a change I did that you don't need your installation will possibly fail.

FakePCIID_AR9280_as_BCM943142HM.kext is something I needed because this machine has a wifi card whitelist that can't be removed, and none of its whitelisted cards are supported on macOS. To get around that, I rebranded an AR9280 as a BCM943142HM (which is on the whitelist). This is where the kext comes in - it tells macOS to treat the card as the AR9280 it actually is, not the BCM943142HM it identifies itself as.