Skip to content

Instantly share code, notes, and snippets.

@mattbrailsford

mattbrailsford/Blacknose_Settings.md

Last active April 6, 2016 20:43
Show Gist options
  • Save mattbrailsford/60294d3613500decca8d to your computer and use it in GitHub Desktop.
Save mattbrailsford/60294d3613500decca8d to your computer and use it in GitHub Desktop.
Download ZIP
Raw
Blacknose_Settings.md

Cut [Vector]

6mm MDF > 6.5mms speed / 35% power / 30% corner power
3mm MDF > 16mms speed / 30% power / 25% corner power
6mm MDF > 8ms speed / 40% power / 35% corner power
3mm Plywood > 20mms speed / 30% power / 25% corner power
1.5mm Acrylic > 20mms speed / 40% power / 35% corner power
3mm Acrylic > 15mms speed / 40% power / 35% corner power
5mm Acrylic > 5mms speed / 50% power / 45% corner power
Thin Card > 150mms speed / 20% power / 15% corner power

Engrave [Vector]

Plywood > 20mms speed / 10% power / 9% corner power
Acrylic > 15mms speed / 10% power / 9% corner power

Engrave [Rastor]

Plywood > 300mms speed / 20% power / 0.08 spacing
Acrylic > 300mms speed / 30% power / 0.05 spacing

Rules of Thumb

Corner power = 90% of main power

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment