Pulled from Edmunds (with filters)
Ranked by Perceived Value (Best Deals First)
- Total Vehicles: 21
- Average Price: $34,405
- Price Range: $28,100 - $42,998
- Vehicles with Pricing: 20/21
Pulled from Edmunds (with filters)
Ranked by Perceived Value (Best Deals First)
#include <WiFi.h> | |
#include <WiFiClientSecure.h> | |
#include <SD.h> | |
// WiFi credentials | |
const char* ssid = "Your_SSID"; | |
const char* password = "Your_PASSWORD"; | |
// S3 credentials and bucket details | |
const char* bucketName = "your-bucket-name"; |
const ulp_insn_t ulp_program[] = { | |
// Label to loop back to | |
M_LABEL(1), | |
// Read GPIO18 state (bit 28) via RTC_GPIO_IN_REG | |
I_RD_REG(RTC_GPIO_IN_REG, RTC_GPIO_INDEX + RTC_GPIO_IN_NEXT_S, RTC_GPIO_INDEX + RTC_GPIO_IN_NEXT_S), | |
// Check if GPIO18 is low (R0 < 1). If low, wake up the CPU. | |
M_BL(2, 1), // If R0 < 1 (i.e., if GPIO18 is low, branch to wakeup) |
const ulp_insn_t ulp_program[] = { | |
// Initialize transition counter (R3 <- 0) | |
I_MOVI(R3, 0), // Set R3 to 0 (counter) | |
I_MOVI(R2, 1), // Set R2 to address RTC_SLOW_MEM[1] | |
// Increment 1 | |
I_ADDI(R3, R3, 1), // Increment R3 by 1 | |
I_ST(R3, R2, 0), // Store R3 in RTC_SLOW_MEM[1] | |
// Increment 2 |
#define GPIO_SENSOR_PIN GPIO_NUM_18 // GPIO pin connected to the sensor | |
#define RTC_GPIO_INDEX 18 // Serial.println(rtc_io_number_get(GPIO_SENSOR_PIN)); | |
#define LED_PIN GPIO_NUM_13 | |
#define LED_GPIO_INDEX 13 | |
const ulp_insn_t ulp_program[] = { | |
// Main loop | |
M_LABEL(1), |
// Example to enter deep sleep after 10 seconds and wake up with a GPIO pin | |
void setup() { | |
// Initialize Serial for debugging | |
Serial.begin(115200); | |
delay(1000); // Wait for the serial to initialize | |
// Set GPIO pin for wakeup | |
esp_sleep_enable_ext0_wakeup(GPIO_NUM_0, 0); // Wake on low signal on GPIO 0 | |
// Start deep sleep |
% Parameters | |
num_points = 100; | |
noise_level = 0.25; % Adjust this value to control the amount of noise | |
% Generate x values | |
x_curve = linspace(0, 1, 1000); % Generate 1000 points between 0 and 1 | |
y_curve = log(1 + 99 * x_curve) / log(100); % Compute y values for the curve | |
% Select 12 random points along the curve | |
indices = randperm(length(x_curve), num_points); |
% Neodymium magnet parameters | |
radius_mm = 10; % Magnet radius in millimeters | |
thickness_mm = 3; % Magnet thickness in millimeters | |
M = 1.0; % Magnetization in A m (adjust this value) | |
% Conversion factor from Gauss to voltage change | |
gauss_to_voltage = 1.5 / 1000; | |
% Permeability of free space | |
mu0 = 4 * pi * 1e-7; |
<div class="is-content-justification-center" style="text-align:center"> | |
<p>Did you know? <span id="rotatingText"><a target="_blank" href="https://journals.plos.org/plosone/article?id=10.1371/journal.pone.0094215">Your brain slow down at 24, but peaks for some cognitive skills at other ages</a>.</span></p> | |
</div> | |
<script> | |
var textArray = [ | |
'<a target="_blank" href="https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2754571/">The human brain is the fattest organ in the body, consisting of at least 60% fat</a>.', | |
'<a target="_blank" href="https://pubmed.ncbi.nlm.nih.gov/20329590/">Your brain can generate about 20 watts of electrical power</a>.', | |
'<a target="_blank" href="https://www.frontiersin.org/articles/10.3389/fnmol.2018.00216/full">Your brain uses about 20% of your bodys total energy and oxygen intake</a>.', | |
'<a target="_blank" href="https://www.brainline.org/author/brian-greenwald/qa/can-brain-itself-feel-pain">Your brain is incapable of feeling pain</a>.', |
% Hargens et al. (1985) Figure 2 Recreation | |
xs = 30:10:70; | |
fitxs = 0:100; | |
% backed out from plot | |
loadCenter = [49,40,33,20,10]; | |
loadErrorUpper = [50.5,42.5,38,25,12.5]; | |
tensionCenter = [50,57,66,78,85]; | |
tensionErrorUpper = [55,59,70,83,88]; |