Created
November 27, 2015 18:33
-
-
Save matthijskooijman/be29be54934bbef1b92f to your computer and use it in GitHub Desktop.
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ( pcb2gcode 1.2.2 ) | |
| ( Software-independent Gcode ) | |
| G94 ( Millimeters per minute feed rate. ) | |
| G21 ( Units == Millimeters. ) | |
| G90 ( Absolute coordinates. ) | |
| S0 ( RPM spindle speed. ) | |
| G64 P0.05080 ( set maximum deviation from commanded toolpath ) | |
| F500.00000 ( Feedrate. ) | |
| F500.00000 ( Feedrate. ) | |
| M3 ( Spindle on clockwise. ) | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X3.50520 Y-1.27000 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X3.50520 Y-1.27000 | |
| X3.50520 Y-4.08940 | |
| X4.47040 Y-4.08940 | |
| X4.47040 Y-6.70560 | |
| X4.26720 Y-6.80720 | |
| X4.26720 Y-6.85800 | |
| X4.14020 Y-6.98500 | |
| X4.08940 Y-7.18820 | |
| X4.08940 Y-8.02640 | |
| X4.19100 Y-8.30580 | |
| X4.26720 Y-8.35660 | |
| X4.29260 Y-8.43280 | |
| X4.47040 Y-8.50900 | |
| X4.49580 Y-8.55980 | |
| X5.51180 Y-8.58520 | |
| X5.63880 Y-8.55980 | |
| X5.66420 Y-8.50900 | |
| X5.84200 Y-8.43280 | |
| X5.99440 Y-8.20420 | |
| X6.62940 Y-8.20420 | |
| X6.62940 Y-8.58520 | |
| X8.58520 Y-8.58520 | |
| X8.58520 Y-6.62940 | |
| X6.62940 Y-6.62940 | |
| X6.62940 Y-7.01040 | |
| X5.99440 Y-7.01040 | |
| X5.84200 Y-6.78180 | |
| X5.66420 Y-6.70560 | |
| X5.66420 Y-4.08940 | |
| X6.62940 Y-4.08940 | |
| X6.62940 Y-0.96520 | |
| X3.50520 Y-0.96520 | |
| X3.50520 Y-1.27000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X9.01700 Y-1.27000 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X9.01700 Y-1.27000 | |
| X8.81380 Y-1.44780 | |
| X8.61060 Y-1.90500 | |
| X8.58520 Y-2.10820 | |
| X8.61060 Y-3.14960 | |
| X8.81380 Y-3.60680 | |
| X9.04240 Y-3.83540 | |
| X9.37260 Y-4.01320 | |
| X9.55040 Y-4.03860 | |
| X9.55040 Y-6.62940 | |
| X9.16940 Y-6.62940 | |
| X9.16940 Y-8.58520 | |
| X11.12520 Y-8.58520 | |
| X11.12520 Y-8.20420 | |
| X11.76020 Y-8.20420 | |
| X11.91260 Y-8.43280 | |
| X12.09040 Y-8.50900 | |
| X12.11580 Y-8.55980 | |
| X12.24280 Y-8.58520 | |
| X13.25880 Y-8.55980 | |
| X13.28420 Y-8.50900 | |
| X13.48740 Y-8.40740 | |
| X13.48740 Y-8.35660 | |
| X13.61440 Y-8.22960 | |
| X13.66520 Y-8.02640 | |
| X13.66520 Y-7.18820 | |
| X13.61440 Y-6.98500 | |
| X13.56360 Y-6.95960 | |
| X13.46200 Y-6.78180 | |
| X13.28420 Y-6.70560 | |
| X13.25880 Y-6.65480 | |
| X13.13180 Y-6.62940 | |
| X12.24280 Y-6.62940 | |
| X12.11580 Y-6.65480 | |
| X12.09040 Y-6.70560 | |
| X11.91260 Y-6.78180 | |
| X11.76020 Y-7.01040 | |
| X11.12520 Y-7.01040 | |
| X11.12520 Y-6.62940 | |
| X10.74420 Y-6.62940 | |
| X10.74420 Y-4.03860 | |
| X10.92200 Y-4.01320 | |
| X11.25220 Y-3.83540 | |
| X11.48080 Y-3.60680 | |
| X11.68400 Y-3.14960 | |
| X11.70940 Y-2.10820 | |
| X11.68400 Y-1.90500 | |
| X11.55700 Y-1.57480 | |
| X11.50620 Y-1.54940 | |
| X11.48080 Y-1.44780 | |
| X11.09980 Y-1.11760 | |
| X10.59180 Y-0.96520 | |
| X9.55040 Y-0.99060 | |
| X9.19480 Y-1.11760 | |
| X9.01700 Y-1.27000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X13.66520 Y-1.27000 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X13.66520 Y-1.27000 | |
| X13.66520 Y-4.08940 | |
| X14.78280 Y-4.08940 | |
| X14.80820 Y-7.49300 | |
| X17.24660 Y-9.93140 | |
| X17.29740 Y-9.93140 | |
| X17.29740 Y-9.98220 | |
| X20.87880 Y-13.53820 | |
| X20.87880 Y-14.42720 | |
| X20.92960 Y-14.50340 | |
| X20.92960 Y-21.03120 | |
| X20.87880 Y-21.10740 | |
| X20.87880 Y-26.56840 | |
| X19.32940 Y-28.11780 | |
| X17.37360 Y-28.14320 | |
| X14.80820 Y-30.70860 | |
| X14.78280 Y-35.20440 | |
| X10.33780 Y-39.64940 | |
| X9.70280 Y-39.64940 | |
| X9.57580 Y-39.67480 | |
| X9.55040 Y-39.72560 | |
| X9.37260 Y-39.80180 | |
| X9.34720 Y-39.87800 | |
| X9.22020 Y-40.00500 | |
| X9.16940 Y-40.20820 | |
| X9.16940 Y-40.81780 | |
| X8.28040 Y-41.70680 | |
| X4.39420 Y-41.70680 | |
| X4.14020 Y-41.42740 | |
| X4.08940 Y-41.42740 | |
| X3.98780 Y-41.30040 | |
| X3.93700 Y-41.30040 | |
| X3.53060 Y-40.91940 | |
| X3.47980 Y-40.91940 | |
| X3.47980 Y-28.34640 | |
| X3.42900 Y-28.24480 | |
| X3.42900 Y-13.79220 | |
| X3.40360 Y-13.69060 | |
| X3.30200 Y-13.61440 | |
| X3.30200 Y-13.56360 | |
| X3.09880 Y-13.36040 | |
| X3.09880 Y-13.30960 | |
| X2.89560 Y-13.10640 | |
| X2.89560 Y-13.05560 | |
| X2.79400 Y-12.97940 | |
| X2.66700 Y-12.97940 | |
| X2.66700 Y-12.42060 | |
| X0.60960 Y-12.42060 | |
| X0.60960 Y-14.42720 | |
| X2.61620 Y-14.45260 | |
| X2.61620 Y-41.57980 | |
| X2.69240 Y-41.73220 | |
| X2.74320 Y-41.73220 | |
| X2.84480 Y-41.85920 | |
| X2.89560 Y-41.85920 | |
| X3.30200 Y-42.24020 | |
| X3.35280 Y-42.24020 | |
| X3.70840 Y-42.59580 | |
| X16.91640 Y-42.59580 | |
| X16.99260 Y-42.72280 | |
| X17.17040 Y-42.79900 | |
| X17.19580 Y-42.84980 | |
| X18.21180 Y-42.87520 | |
| X18.33880 Y-42.84980 | |
| X18.36420 Y-42.79900 | |
| X18.54200 Y-42.72280 | |
| X18.71980 Y-42.44340 | |
| X18.74520 Y-42.31640 | |
| X18.71980 Y-41.35120 | |
| X18.64360 Y-41.19880 | |
| X18.56740 Y-41.14800 | |
| X18.56740 Y-41.09720 | |
| X18.36420 Y-40.99560 | |
| X18.33880 Y-40.94480 | |
| X18.21180 Y-40.91940 | |
| X17.19580 Y-40.94480 | |
| X17.17040 Y-40.99560 | |
| X16.99260 Y-41.07180 | |
| X16.84020 Y-41.27500 | |
| X16.78940 Y-41.47820 | |
| X16.78940 Y-41.70680 | |
| X12.01420 Y-41.70680 | |
| X11.91260 Y-41.57980 | |
| X11.76020 Y-41.55440 | |
| X11.73480 Y-41.40200 | |
| X11.12520 Y-40.81780 | |
| X11.12520 Y-40.43680 | |
| X11.73480 Y-39.85260 | |
| X11.76020 Y-39.70020 | |
| X11.91260 Y-39.67480 | |
| X15.67180 Y-35.89020 | |
| X15.67180 Y-31.44520 | |
| X18.11020 Y-29.00680 | |
| X20.01520 Y-29.00680 | |
| X21.64080 Y-27.40660 | |
| X21.69160 Y-27.25420 | |
| X21.69160 Y-12.85240 | |
| X21.64080 Y-12.70000 | |
| X15.67180 Y-6.75640 | |
| X15.67180 Y-4.08940 | |
| X16.78940 Y-4.08940 | |
| X16.78940 Y-0.96520 | |
| X13.66520 Y-0.96520 | |
| X13.66520 Y-1.27000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X19.17700 Y-1.27000 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X19.17700 Y-1.27000 | |
| X18.97380 Y-1.44780 | |
| X18.94840 Y-1.54940 | |
| X18.89760 Y-1.57480 | |
| X18.77060 Y-1.90500 | |
| X18.74520 Y-2.10820 | |
| X18.77060 Y-3.14960 | |
| X18.97380 Y-3.60680 | |
| X19.35480 Y-3.93700 | |
| X19.43100 Y-3.93700 | |
| X19.53260 Y-4.01320 | |
| X19.71040 Y-4.06400 | |
| X20.75180 Y-4.08940 | |
| X21.00580 Y-4.01320 | |
| X21.64080 Y-4.64820 | |
| X21.64080 Y-12.77620 | |
| X21.69160 Y-12.85240 | |
| X21.69160 Y-27.25420 | |
| X21.64080 Y-27.33040 | |
| X21.64080 Y-28.77820 | |
| X22.70760 Y-29.84500 | |
| X22.70760 Y-30.42920 | |
| X24.76500 Y-30.42920 | |
| X24.76500 Y-28.42260 | |
| X22.80920 Y-28.42260 | |
| X22.73300 Y-28.34640 | |
| X22.73300 Y-28.27020 | |
| X22.52980 Y-28.09240 | |
| X22.52980 Y-3.96240 | |
| X21.79320 Y-3.22580 | |
| X21.84400 Y-3.14960 | |
| X21.86940 Y-2.94640 | |
| X21.84400 Y-1.90500 | |
| X21.64080 Y-1.44780 | |
| X21.41220 Y-1.21920 | |
| X21.08200 Y-1.04140 | |
| X20.75180 Y-0.96520 | |
| X19.86280 Y-0.96520 | |
| X19.40560 Y-1.09220 | |
| X19.17700 Y-1.27000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X15.59560 Y-10.03300 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X15.59560 Y-10.03300 | |
| X15.49400 Y-10.16000 | |
| X15.44320 Y-10.41400 | |
| X15.44320 Y-10.84580 | |
| X14.02080 Y-12.26820 | |
| X13.99540 Y-14.19860 | |
| X13.66520 Y-14.52880 | |
| X13.66520 Y-14.24940 | |
| X13.28420 Y-14.24940 | |
| X13.28420 Y-13.58900 | |
| X13.23340 Y-13.48740 | |
| X12.52220 Y-12.77620 | |
| X12.39520 Y-12.72540 | |
| X5.35940 Y-12.72540 | |
| X5.23240 Y-12.77620 | |
| X4.52120 Y-13.48740 | |
| X4.47040 Y-13.61440 | |
| X4.47040 Y-14.24940 | |
| X4.24180 Y-14.24940 | |
| X4.16560 Y-14.32560 | |
| X4.16560 Y-16.12900 | |
| X4.24180 Y-16.20520 | |
| X6.04520 Y-16.20520 | |
| X6.04520 Y-14.24940 | |
| X5.76580 Y-14.24940 | |
| X6.09600 Y-13.91920 | |
| X11.65860 Y-13.91920 | |
| X11.98880 Y-14.24940 | |
| X11.70940 Y-14.24940 | |
| X11.70940 Y-16.20520 | |
| X13.66520 Y-16.20520 | |
| X13.66520 Y-15.82420 | |
| X14.32560 Y-15.82420 | |
| X14.42720 Y-15.77340 | |
| X15.13840 Y-15.06220 | |
| X15.18920 Y-14.96060 | |
| X15.18920 Y-13.08100 | |
| X15.90040 Y-12.36980 | |
| X15.90040 Y-13.79220 | |
| X15.95120 Y-13.91920 | |
| X16.89100 Y-14.85900 | |
| X16.96720 Y-14.85900 | |
| X16.99260 Y-14.90980 | |
| X17.09420 Y-14.93520 | |
| X17.19580 Y-15.06220 | |
| X17.24660 Y-15.06220 | |
| X17.24660 Y-15.11300 | |
| X17.44980 Y-15.29080 | |
| X17.50060 Y-15.46860 | |
| X18.44040 Y-16.38300 | |
| X18.44040 Y-18.13560 | |
| X18.23720 Y-18.23720 | |
| X18.23720 Y-18.28800 | |
| X18.16100 Y-18.33880 | |
| X18.08480 Y-18.49120 | |
| X18.05940 Y-19.45640 | |
| X18.11020 Y-19.65960 | |
| X18.16100 Y-19.68500 | |
| X18.26260 Y-19.86280 | |
| X18.44040 Y-19.93900 | |
| X18.46580 Y-19.98980 | |
| X18.59280 Y-20.01520 | |
| X19.60880 Y-19.98980 | |
| X19.63420 Y-19.93900 | |
| X19.83740 Y-19.83740 | |
| X19.83740 Y-19.78660 | |
| X19.96440 Y-19.65960 | |
| X20.01520 Y-19.45640 | |
| X19.98980 Y-18.49120 | |
| X19.91360 Y-18.33880 | |
| X19.83740 Y-18.28800 | |
| X19.83740 Y-18.23720 | |
| X19.63420 Y-18.13560 | |
| X19.63420 Y-15.62100 | |
| X19.58340 Y-15.51940 | |
| X17.09420 Y-13.05560 | |
| X17.09420 Y-11.76020 | |
| X17.32280 Y-11.65860 | |
| X17.32280 Y-11.60780 | |
| X17.39900 Y-11.55700 | |
| X17.44980 Y-11.43000 | |
| X17.50060 Y-11.40460 | |
| X17.55140 Y-11.15060 | |
| X17.55140 Y-10.41400 | |
| X17.50060 Y-10.16000 | |
| X17.14500 Y-9.80440 | |
| X16.86560 Y-9.72820 | |
| X15.97660 Y-9.75360 | |
| X15.67180 Y-9.90600 | |
| X15.67180 Y-9.95680 | |
| X15.59560 Y-10.03300 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X18.13560 Y-12.57300 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X18.13560 Y-12.57300 | |
| X18.03400 Y-12.70000 | |
| X17.98320 Y-12.95400 | |
| X17.98320 Y-13.69060 | |
| X18.03400 Y-13.94460 | |
| X18.08480 Y-13.97000 | |
| X18.13560 Y-14.09700 | |
| X18.26260 Y-14.22400 | |
| X18.51660 Y-14.35100 | |
| X19.30400 Y-14.37640 | |
| X20.11680 Y-15.18920 | |
| X20.11680 Y-20.34540 | |
| X18.59280 Y-21.86940 | |
| X18.59280 Y-25.42540 | |
| X17.47520 Y-24.30780 | |
| X14.24940 Y-24.30780 | |
| X12.39520 Y-26.16200 | |
| X12.39520 Y-25.67940 | |
| X10.43940 Y-25.67940 | |
| X10.43940 Y-27.27960 | |
| X10.56640 Y-27.55900 | |
| X10.71880 Y-27.63520 | |
| X10.97280 Y-27.63520 | |
| X10.97280 Y-29.54020 | |
| X12.24280 Y-30.81020 | |
| X12.24280 Y-32.05480 | |
| X12.11580 Y-32.05480 | |
| X12.09040 Y-32.10560 | |
| X11.91260 Y-32.18180 | |
| X11.88720 Y-32.25800 | |
| X11.76020 Y-32.38500 | |
| X11.70940 Y-32.58820 | |
| X11.73480 Y-33.55340 | |
| X11.81100 Y-33.70580 | |
| X11.88720 Y-33.75660 | |
| X11.88720 Y-33.80740 | |
| X12.09040 Y-33.90900 | |
| X12.11580 Y-33.95980 | |
| X12.24280 Y-33.98520 | |
| X13.25880 Y-33.95980 | |
| X13.28420 Y-33.90900 | |
| X13.48740 Y-33.80740 | |
| X13.48740 Y-33.75660 | |
| X13.56360 Y-33.70580 | |
| X13.63980 Y-33.55340 | |
| X13.61440 Y-32.38500 | |
| X13.46200 Y-32.18180 | |
| X13.28420 Y-32.10560 | |
| X13.25880 Y-32.05480 | |
| X13.13180 Y-32.05480 | |
| X13.13180 Y-30.12440 | |
| X11.86180 Y-28.85440 | |
| X11.86180 Y-27.63520 | |
| X12.39520 Y-27.63520 | |
| X12.39520 Y-27.10180 | |
| X13.08100 Y-27.07640 | |
| X14.93520 Y-25.19680 | |
| X16.78940 Y-25.19680 | |
| X18.05940 Y-26.46680 | |
| X18.08480 Y-27.20340 | |
| X18.16100 Y-27.35580 | |
| X18.23720 Y-27.40660 | |
| X18.23720 Y-27.45740 | |
| X18.31340 Y-27.48280 | |
| X18.33880 Y-27.53360 | |
| X18.59280 Y-27.63520 | |
| X19.48180 Y-27.63520 | |
| X19.60880 Y-27.60980 | |
| X19.63420 Y-27.55900 | |
| X19.81200 Y-27.48280 | |
| X19.98980 Y-27.20340 | |
| X20.01520 Y-26.23820 | |
| X19.96440 Y-26.03500 | |
| X19.81200 Y-25.83180 | |
| X19.63420 Y-25.75560 | |
| X19.60880 Y-25.70480 | |
| X19.48180 Y-25.70480 | |
| X19.48180 Y-22.55520 | |
| X20.87880 Y-21.18360 | |
| X20.92960 Y-21.03120 | |
| X20.92960 Y-14.50340 | |
| X20.87880 Y-14.35100 | |
| X20.09140 Y-13.58900 | |
| X20.09140 Y-12.95400 | |
| X20.04060 Y-12.70000 | |
| X19.68500 Y-12.34440 | |
| X19.40560 Y-12.26820 | |
| X18.66900 Y-12.26820 | |
| X18.38960 Y-12.34440 | |
| X18.36420 Y-12.39520 | |
| X18.21180 Y-12.44600 | |
| X18.21180 Y-12.49680 | |
| X18.13560 Y-12.57300 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X15.59560 Y-15.11300 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X15.59560 Y-15.11300 | |
| X15.49400 Y-15.24000 | |
| X15.44320 Y-15.49400 | |
| X15.44320 Y-16.23060 | |
| X15.49400 Y-16.48460 | |
| X15.54480 Y-16.51000 | |
| X15.59560 Y-16.63700 | |
| X15.67180 Y-16.68780 | |
| X15.67180 Y-16.73860 | |
| X15.90040 Y-16.84020 | |
| X15.90040 Y-18.13560 | |
| X15.72260 Y-18.21180 | |
| X15.57020 Y-18.41500 | |
| X15.51940 Y-18.61820 | |
| X15.51940 Y-19.02460 | |
| X14.96060 Y-19.55800 | |
| X14.96060 Y-19.63420 | |
| X14.83360 Y-19.73580 | |
| X14.75740 Y-19.88820 | |
| X14.65580 Y-19.91360 | |
| X14.55420 Y-20.04060 | |
| X14.47800 Y-20.04060 | |
| X12.92860 Y-21.61540 | |
| X8.53440 Y-21.61540 | |
| X8.40740 Y-21.66620 | |
| X5.79120 Y-24.28240 | |
| X5.74040 Y-24.40940 | |
| X5.74040 Y-25.67940 | |
| X5.35940 Y-25.67940 | |
| X5.35940 Y-27.35580 | |
| X5.43560 Y-27.55900 | |
| X5.61340 Y-27.63520 | |
| X7.31520 Y-27.63520 | |
| X7.31520 Y-25.67940 | |
| X6.93420 Y-25.67940 | |
| X6.93420 Y-25.14600 | |
| X9.27100 Y-22.80920 | |
| X13.69060 Y-22.80920 | |
| X13.79220 Y-22.75840 | |
| X16.51000 Y-20.01520 | |
| X17.06880 Y-19.98980 | |
| X17.09420 Y-19.93900 | |
| X17.29740 Y-19.83740 | |
| X17.29740 Y-19.78660 | |
| X17.42440 Y-19.65960 | |
| X17.47520 Y-19.45640 | |
| X17.47520 Y-18.61820 | |
| X17.42440 Y-18.41500 | |
| X17.29740 Y-18.28800 | |
| X17.29740 Y-18.23720 | |
| X17.09420 Y-18.13560 | |
| X17.09420 Y-16.84020 | |
| X17.32280 Y-16.73860 | |
| X17.32280 Y-16.68780 | |
| X17.50060 Y-16.48460 | |
| X17.55140 Y-16.23060 | |
| X17.55140 Y-15.49400 | |
| X17.50060 Y-15.46860 | |
| X17.44980 Y-15.29080 | |
| X17.24660 Y-15.11300 | |
| X17.24660 Y-15.06220 | |
| X17.19580 Y-15.06220 | |
| X17.09420 Y-14.93520 | |
| X16.99260 Y-14.90980 | |
| X16.96720 Y-14.85900 | |
| X16.89100 Y-14.85900 | |
| X16.86560 Y-14.80820 | |
| X15.97660 Y-14.83360 | |
| X15.67180 Y-14.98600 | |
| X15.67180 Y-15.03680 | |
| X15.59560 Y-15.11300 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X9.27100 Y-14.55420 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X9.27100 Y-14.55420 | |
| X9.22020 Y-14.60500 | |
| X9.19480 Y-14.78280 | |
| X8.55980 Y-14.78280 | |
| X8.55980 Y-14.68120 | |
| X8.48360 Y-14.52880 | |
| X8.40740 Y-14.47800 | |
| X8.38200 Y-14.40180 | |
| X8.20420 Y-14.32560 | |
| X8.17880 Y-14.27480 | |
| X7.16280 Y-14.24940 | |
| X7.03580 Y-14.27480 | |
| X7.01040 Y-14.32560 | |
| X6.83260 Y-14.40180 | |
| X6.80720 Y-14.47800 | |
| X6.68020 Y-14.60500 | |
| X6.62940 Y-14.80820 | |
| X6.62940 Y-15.64640 | |
| X6.68020 Y-15.84960 | |
| X6.80720 Y-15.97660 | |
| X6.80720 Y-16.02740 | |
| X7.01040 Y-16.12900 | |
| X7.03580 Y-16.17980 | |
| X7.16280 Y-16.17980 | |
| X7.16280 Y-17.42440 | |
| X6.52780 Y-18.05940 | |
| X5.76580 Y-18.08480 | |
| X5.74040 Y-18.13560 | |
| X5.53720 Y-18.23720 | |
| X5.53720 Y-18.28800 | |
| X5.41020 Y-18.41500 | |
| X5.38480 Y-18.59280 | |
| X4.67360 Y-18.61820 | |
| X4.26720 Y-19.15160 | |
| X4.21640 Y-19.35480 | |
| X4.21640 Y-27.63520 | |
| X4.82600 Y-28.24480 | |
| X4.82600 Y-28.29560 | |
| X5.43560 Y-28.93060 | |
| X5.66420 Y-29.00680 | |
| X7.89940 Y-29.00680 | |
| X8.43280 Y-29.54020 | |
| X8.43280 Y-32.28340 | |
| X8.50900 Y-32.51200 | |
| X8.50900 Y-33.50260 | |
| X8.43280 Y-33.73120 | |
| X8.43280 Y-36.47440 | |
| X5.25780 Y-39.64940 | |
| X4.49580 Y-39.67480 | |
| X4.47040 Y-39.72560 | |
| X4.29260 Y-39.80180 | |
| X4.26720 Y-39.87800 | |
| X4.19100 Y-39.92880 | |
| X4.08940 Y-40.20820 | |
| X4.11480 Y-41.17340 | |
| X4.29260 Y-41.45280 | |
| X4.47040 Y-41.52900 | |
| X4.49580 Y-41.57980 | |
| X4.62280 Y-41.60520 | |
| X5.51180 Y-41.60520 | |
| X5.63880 Y-41.57980 | |
| X5.66420 Y-41.52900 | |
| X5.84200 Y-41.45280 | |
| X5.86740 Y-41.37660 | |
| X5.99440 Y-41.24960 | |
| X6.04520 Y-41.04640 | |
| X6.04520 Y-40.43680 | |
| X9.32180 Y-37.16020 | |
| X9.32180 Y-33.68040 | |
| X9.27100 Y-33.57880 | |
| X9.24560 Y-33.35020 | |
| X9.24560 Y-32.66440 | |
| X9.27100 Y-32.43580 | |
| X9.32180 Y-32.33420 | |
| X9.32180 Y-28.85440 | |
| X8.58520 Y-28.11780 | |
| X6.04520 Y-28.11780 | |
| X5.99440 Y-28.01620 | |
| X5.76580 Y-27.81300 | |
| X5.76580 Y-27.76220 | |
| X5.61340 Y-27.60980 | |
| X5.43560 Y-27.55900 | |
| X5.33400 Y-27.27960 | |
| X5.05460 Y-27.00020 | |
| X5.05460 Y-19.96440 | |
| X5.13080 Y-19.91360 | |
| X5.13080 Y-19.86280 | |
| X5.20700 Y-19.81200 | |
| X5.20700 Y-19.76120 | |
| X5.28320 Y-19.71040 | |
| X5.38480 Y-19.53260 | |
| X5.41020 Y-19.65960 | |
| X5.53720 Y-19.78660 | |
| X5.53720 Y-19.83740 | |
| X5.74040 Y-19.93900 | |
| X5.76580 Y-19.98980 | |
| X6.78180 Y-20.01520 | |
| X6.90880 Y-19.98980 | |
| X6.93420 Y-19.93900 | |
| X7.13740 Y-19.83740 | |
| X7.13740 Y-19.78660 | |
| X7.26440 Y-19.65960 | |
| X7.28980 Y-19.48180 | |
| X7.92480 Y-19.48180 | |
| X7.92480 Y-19.58340 | |
| X8.00100 Y-19.73580 | |
| X8.07720 Y-19.78660 | |
| X8.10260 Y-19.86280 | |
| X8.28040 Y-19.93900 | |
| X8.30580 Y-19.98980 | |
| X9.32180 Y-20.01520 | |
| X9.44880 Y-19.98980 | |
| X9.47420 Y-19.93900 | |
| X9.67740 Y-19.83740 | |
| X9.67740 Y-19.78660 | |
| X9.80440 Y-19.65960 | |
| X9.82980 Y-19.48180 | |
| X10.46480 Y-19.48180 | |
| X10.46480 Y-19.58340 | |
| X10.54100 Y-19.73580 | |
| X10.61720 Y-19.78660 | |
| X10.64260 Y-19.86280 | |
| X10.82040 Y-19.93900 | |
| X10.84580 Y-19.98980 | |
| X11.86180 Y-20.01520 | |
| X11.98880 Y-19.98980 | |
| X12.01420 Y-19.93900 | |
| X12.21740 Y-19.83740 | |
| X12.21740 Y-19.78660 | |
| X12.34440 Y-19.65960 | |
| X12.36980 Y-19.48180 | |
| X12.92860 Y-19.48180 | |
| X12.95400 Y-19.65960 | |
| X13.13180 Y-19.86280 | |
| X13.13180 Y-19.91360 | |
| X13.23340 Y-19.93900 | |
| X13.36040 Y-20.04060 | |
| X13.58900 Y-20.09140 | |
| X14.32560 Y-20.09140 | |
| X14.55420 Y-20.04060 | |
| X14.65580 Y-19.91360 | |
| X14.75740 Y-19.88820 | |
| X14.83360 Y-19.73580 | |
| X14.96060 Y-19.63420 | |
| X15.01140 Y-19.40560 | |
| X15.01140 Y-18.66900 | |
| X14.96060 Y-18.41500 | |
| X14.78280 Y-18.21180 | |
| X14.78280 Y-18.16100 | |
| X14.47800 Y-18.00860 | |
| X13.58900 Y-17.98320 | |
| X13.36040 Y-18.03400 | |
| X13.28420 Y-18.11020 | |
| X13.13180 Y-18.16100 | |
| X13.13180 Y-18.21180 | |
| X12.95400 Y-18.41500 | |
| X12.92860 Y-18.59280 | |
| X12.36980 Y-18.59280 | |
| X12.34440 Y-18.41500 | |
| X12.21740 Y-18.28800 | |
| X12.21740 Y-18.23720 | |
| X12.01420 Y-18.13560 | |
| X11.98880 Y-18.08480 | |
| X11.86180 Y-18.05940 | |
| X10.84580 Y-18.08480 | |
| X10.82040 Y-18.13560 | |
| X10.61720 Y-18.23720 | |
| X10.61720 Y-18.28800 | |
| X10.49020 Y-18.41500 | |
| X10.46480 Y-18.59280 | |
| X9.82980 Y-18.59280 | |
| X9.82980 Y-18.49120 | |
| X9.75360 Y-18.33880 | |
| X9.67740 Y-18.28800 | |
| X9.65200 Y-18.21180 | |
| X9.47420 Y-18.13560 | |
| X9.44880 Y-18.08480 | |
| X8.68680 Y-18.05940 | |
| X8.05180 Y-17.42440 | |
| X8.05180 Y-16.17980 | |
| X8.17880 Y-16.17980 | |
| X8.20420 Y-16.12900 | |
| X8.40740 Y-16.02740 | |
| X8.40740 Y-15.97660 | |
| X8.53440 Y-15.84960 | |
| X8.55980 Y-15.67180 | |
| X9.19480 Y-15.67180 | |
| X9.19480 Y-15.77340 | |
| X9.27100 Y-15.92580 | |
| X9.34720 Y-15.97660 | |
| X9.37260 Y-16.05280 | |
| X9.55040 Y-16.12900 | |
| X9.57580 Y-16.17980 | |
| X10.59180 Y-16.20520 | |
| X10.71880 Y-16.17980 | |
| X10.74420 Y-16.12900 | |
| X10.94740 Y-16.02740 | |
| X10.94740 Y-15.97660 | |
| X11.07440 Y-15.84960 | |
| X11.12520 Y-15.64640 | |
| X11.09980 Y-14.68120 | |
| X11.02360 Y-14.52880 | |
| X10.94740 Y-14.47800 | |
| X10.94740 Y-14.42720 | |
| X10.74420 Y-14.32560 | |
| X10.71880 Y-14.27480 | |
| X9.70280 Y-14.24940 | |
| X9.57580 Y-14.27480 | |
| X9.55040 Y-14.32560 | |
| X9.37260 Y-14.40180 | |
| X9.27100 Y-14.55420 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-14.70660 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-14.70660 | |
| X0.60960 Y-16.43380 | |
| X2.61620 Y-16.43380 | |
| X2.59080 Y-14.42720 | |
| X0.60960 Y-14.42720 | |
| X0.60960 Y-14.70660 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-16.71320 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-16.71320 | |
| X0.60960 Y-18.44040 | |
| X2.61620 Y-18.44040 | |
| X2.61620 Y-16.43380 | |
| X0.60960 Y-16.43380 | |
| X0.60960 Y-16.71320 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-18.69440 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-18.69440 | |
| X0.60960 Y-20.42160 | |
| X2.61620 Y-20.42160 | |
| X2.61620 Y-18.44040 | |
| X0.60960 Y-18.44040 | |
| X0.60960 Y-18.69440 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-20.70100 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-20.70100 | |
| X0.60960 Y-22.42820 | |
| X2.61620 Y-22.42820 | |
| X2.61620 Y-20.42160 | |
| X0.60960 Y-20.42160 | |
| X0.60960 Y-20.70100 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-22.70760 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-22.70760 | |
| X0.60960 Y-24.43480 | |
| X2.61620 Y-24.43480 | |
| X2.61620 Y-22.42820 | |
| X0.60960 Y-22.42820 | |
| X0.60960 Y-22.70760 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-24.71420 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-24.71420 | |
| X0.60960 Y-26.44140 | |
| X2.61620 Y-26.44140 | |
| X2.61620 Y-24.43480 | |
| X0.60960 Y-24.43480 | |
| X0.60960 Y-24.71420 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-26.69540 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-26.69540 | |
| X0.60960 Y-28.42260 | |
| X2.61620 Y-28.42260 | |
| X2.61620 Y-26.44140 | |
| X0.60960 Y-26.44140 | |
| X0.60960 Y-26.69540 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-28.70200 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-28.70200 | |
| X0.60960 Y-30.42920 | |
| X2.61620 Y-30.42920 | |
| X2.61620 Y-28.42260 | |
| X0.60960 Y-28.42260 | |
| X0.60960 Y-28.70200 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-30.70860 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-30.70860 | |
| X0.60960 Y-32.43580 | |
| X2.61620 Y-32.43580 | |
| X2.61620 Y-30.42920 | |
| X0.60960 Y-30.42920 | |
| X0.60960 Y-30.70860 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-32.68980 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-32.68980 | |
| X0.60960 Y-34.41700 | |
| X2.61620 Y-34.41700 | |
| X2.61620 Y-32.43580 | |
| X0.60960 Y-32.43580 | |
| X0.60960 Y-32.68980 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-34.69640 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-34.69640 | |
| X0.60960 Y-36.42360 | |
| X2.61620 Y-36.42360 | |
| X2.61620 Y-34.41700 | |
| X0.60960 Y-34.41700 | |
| X0.60960 Y-34.69640 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-36.70300 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-36.70300 | |
| X0.60960 Y-38.43020 | |
| X2.61620 Y-38.43020 | |
| X2.61620 Y-36.42360 | |
| X0.60960 Y-36.42360 | |
| X0.60960 Y-36.70300 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-38.70960 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-38.70960 | |
| X0.60960 Y-40.43680 | |
| X2.61620 Y-40.43680 | |
| X2.61620 Y-38.43020 | |
| X0.60960 Y-38.43020 | |
| X0.60960 Y-38.70960 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-40.69080 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-40.69080 | |
| X0.60960 Y-42.44340 | |
| X2.66700 Y-42.44340 | |
| X2.66700 Y-41.68140 | |
| X2.61620 Y-41.57980 | |
| X2.61620 Y-40.43680 | |
| X0.60960 Y-40.43680 | |
| X0.60960 Y-40.69080 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X4.19100 Y-30.42920 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X4.19100 Y-30.42920 | |
| X4.14020 Y-30.48000 | |
| X4.08940 Y-30.68320 | |
| X4.08940 Y-31.52140 | |
| X4.14020 Y-31.72460 | |
| X4.31800 Y-31.95320 | |
| X4.47040 Y-32.00400 | |
| X4.47040 Y-32.10560 | |
| X4.29260 Y-32.18180 | |
| X4.11480 Y-32.46120 | |
| X4.08940 Y-33.42640 | |
| X4.14020 Y-33.62960 | |
| X4.29260 Y-33.83280 | |
| X4.47040 Y-33.90900 | |
| X4.49580 Y-33.95980 | |
| X4.62280 Y-33.98520 | |
| X5.63880 Y-33.95980 | |
| X5.66420 Y-33.90900 | |
| X5.86740 Y-33.80740 | |
| X5.86740 Y-33.75660 | |
| X5.99440 Y-33.62960 | |
| X6.04520 Y-33.42640 | |
| X6.01980 Y-32.46120 | |
| X5.84200 Y-32.18180 | |
| X5.66420 Y-32.10560 | |
| X5.66420 Y-32.00400 | |
| X5.81660 Y-31.95320 | |
| X6.01980 Y-31.67380 | |
| X6.04520 Y-30.96260 | |
| X5.99440 Y-30.81020 | |
| X5.91820 Y-30.70860 | |
| X5.91820 Y-30.63240 | |
| X5.76580 Y-30.50540 | |
| X5.76580 Y-30.45460 | |
| X5.68960 Y-30.37840 | |
| X5.63880 Y-30.37840 | |
| X5.53720 Y-30.25140 | |
| X5.46100 Y-30.25140 | |
| X5.43560 Y-30.20060 | |
| X5.20700 Y-30.12440 | |
| X4.49580 Y-30.14980 | |
| X4.47040 Y-30.20060 | |
| X4.31800 Y-30.25140 | |
| X4.19100 Y-30.42920 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X7.89940 Y-25.98420 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X7.89940 Y-25.98420 | |
| X7.89940 Y-27.63520 | |
| X8.86460 Y-27.63520 | |
| X9.55040 Y-28.32100 | |
| X9.55040 Y-32.10560 | |
| X9.34720 Y-32.20720 | |
| X9.27100 Y-32.43580 | |
| X9.24560 Y-33.35020 | |
| X9.32180 Y-33.75660 | |
| X9.44880 Y-33.88360 | |
| X9.70280 Y-33.98520 | |
| X10.71880 Y-33.95980 | |
| X10.74420 Y-33.90900 | |
| X10.94740 Y-33.80740 | |
| X10.94740 Y-33.75660 | |
| X11.07440 Y-33.62960 | |
| X11.12520 Y-33.42640 | |
| X11.09980 Y-32.46120 | |
| X10.92200 Y-32.18180 | |
| X10.74420 Y-32.10560 | |
| X10.74420 Y-27.63520 | |
| X10.51560 Y-27.50820 | |
| X10.43940 Y-27.20340 | |
| X9.85520 Y-26.64460 | |
| X9.85520 Y-25.67940 | |
| X7.89940 Y-25.67940 | |
| X7.89940 Y-25.98420 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X15.62100 Y-25.98420 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X15.62100 Y-25.98420 | |
| X15.57020 Y-26.03500 | |
| X15.51940 Y-26.23820 | |
| X15.51940 Y-26.64460 | |
| X14.02080 Y-28.14320 | |
| X13.58900 Y-28.14320 | |
| X13.36040 Y-28.19400 | |
| X13.28420 Y-28.27020 | |
| X13.13180 Y-28.32100 | |
| X13.13180 Y-28.37180 | |
| X12.95400 Y-28.57500 | |
| X12.90320 Y-28.82900 | |
| X12.90320 Y-29.56560 | |
| X12.95400 Y-29.81960 | |
| X13.13180 Y-30.02280 | |
| X13.13180 Y-30.07360 | |
| X13.23340 Y-30.09900 | |
| X13.36040 Y-30.20060 | |
| X13.61440 Y-30.25140 | |
| X13.61440 Y-33.62960 | |
| X13.48740 Y-33.75660 | |
| X13.48740 Y-33.80740 | |
| X13.33500 Y-33.88360 | |
| X7.59460 Y-39.64940 | |
| X7.03580 Y-39.67480 | |
| X7.01040 Y-39.72560 | |
| X6.80720 Y-39.82720 | |
| X6.80720 Y-39.87800 | |
| X6.68020 Y-40.00500 | |
| X6.62940 Y-40.20820 | |
| X6.62940 Y-41.04640 | |
| X6.68020 Y-41.24960 | |
| X6.80720 Y-41.37660 | |
| X6.80720 Y-41.42740 | |
| X7.01040 Y-41.52900 | |
| X7.03580 Y-41.57980 | |
| X8.05180 Y-41.60520 | |
| X8.17880 Y-41.57980 | |
| X8.20420 Y-41.52900 | |
| X8.38200 Y-41.45280 | |
| X8.55980 Y-41.17340 | |
| X8.58520 Y-40.64000 | |
| X9.27100 Y-39.97960 | |
| X9.37260 Y-39.80180 | |
| X9.49960 Y-39.75100 | |
| X14.75740 Y-34.49320 | |
| X14.80820 Y-29.99740 | |
| X14.96060 Y-29.81960 | |
| X15.01140 Y-29.56560 | |
| X15.01140 Y-29.13380 | |
| X16.51000 Y-27.63520 | |
| X17.06880 Y-27.60980 | |
| X17.09420 Y-27.55900 | |
| X17.29740 Y-27.45740 | |
| X17.29740 Y-27.40660 | |
| X17.42440 Y-27.27960 | |
| X17.47520 Y-27.07640 | |
| X17.44980 Y-26.11120 | |
| X17.37360 Y-25.95880 | |
| X17.29740 Y-25.90800 | |
| X17.29740 Y-25.85720 | |
| X17.09420 Y-25.75560 | |
| X17.06880 Y-25.70480 | |
| X16.05280 Y-25.67940 | |
| X15.92580 Y-25.70480 | |
| X15.90040 Y-25.75560 | |
| X15.72260 Y-25.83180 | |
| X15.62100 Y-25.98420 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X16.89100 Y-30.42920 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X16.89100 Y-30.42920 | |
| X16.84020 Y-30.48000 | |
| X16.78940 Y-30.68320 | |
| X16.78940 Y-31.52140 | |
| X16.84020 Y-31.72460 | |
| X16.89100 Y-31.75000 | |
| X16.94180 Y-31.87700 | |
| X17.01800 Y-31.95320 | |
| X17.17040 Y-32.00400 | |
| X17.17040 Y-33.37560 | |
| X16.99260 Y-33.45180 | |
| X16.81480 Y-33.73120 | |
| X16.78940 Y-34.69640 | |
| X16.84020 Y-34.89960 | |
| X16.96720 Y-35.02660 | |
| X16.96720 Y-35.07740 | |
| X17.17040 Y-35.17900 | |
| X17.19580 Y-35.22980 | |
| X18.33880 Y-35.22980 | |
| X18.36420 Y-35.17900 | |
| X18.54200 Y-35.10280 | |
| X18.69440 Y-34.87420 | |
| X21.31060 Y-34.87420 | |
| X21.41220 Y-34.82340 | |
| X22.19960 Y-34.01060 | |
| X22.70760 Y-34.01060 | |
| X22.70760 Y-34.41700 | |
| X24.76500 Y-34.41700 | |
| X24.76500 Y-32.41040 | |
| X22.70760 Y-32.41040 | |
| X22.70760 Y-32.81680 | |
| X21.38680 Y-32.84220 | |
| X20.54860 Y-33.68040 | |
| X18.69440 Y-33.68040 | |
| X18.54200 Y-33.45180 | |
| X18.36420 Y-33.37560 | |
| X18.36420 Y-32.00400 | |
| X18.51660 Y-31.95320 | |
| X18.59280 Y-31.87700 | |
| X18.59280 Y-31.82620 | |
| X18.71980 Y-31.67380 | |
| X18.74520 Y-31.52140 | |
| X18.74520 Y-30.68320 | |
| X18.69440 Y-30.48000 | |
| X18.51660 Y-30.25140 | |
| X18.21180 Y-30.12440 | |
| X17.19580 Y-30.14980 | |
| X17.17040 Y-30.20060 | |
| X17.01800 Y-30.25140 | |
| X16.89100 Y-30.42920 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-30.70860 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-30.70860 | |
| X22.70760 Y-31.14040 | |
| X21.31060 Y-31.14040 | |
| X21.20900 Y-30.96260 | |
| X21.13280 Y-30.91180 | |
| X21.13280 Y-30.86100 | |
| X20.82800 Y-30.70860 | |
| X19.93900 Y-30.68320 | |
| X19.71040 Y-30.73400 | |
| X19.63420 Y-30.81020 | |
| X19.48180 Y-30.86100 | |
| X19.48180 Y-30.91180 | |
| X19.30400 Y-31.11500 | |
| X19.25320 Y-31.36900 | |
| X19.25320 Y-32.10560 | |
| X19.30400 Y-32.35960 | |
| X19.48180 Y-32.56280 | |
| X19.48180 Y-32.61360 | |
| X19.58340 Y-32.63900 | |
| X19.71040 Y-32.74060 | |
| X19.93900 Y-32.79140 | |
| X20.82800 Y-32.76600 | |
| X21.13280 Y-32.61360 | |
| X21.13280 Y-32.56280 | |
| X21.20900 Y-32.51200 | |
| X21.31060 Y-32.33420 | |
| X22.70760 Y-32.33420 | |
| X22.70760 Y-32.41040 | |
| X24.76500 Y-32.41040 | |
| X24.76500 Y-30.42920 | |
| X22.70760 Y-30.42920 | |
| X22.70760 Y-30.70860 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-26.69540 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-26.69540 | |
| X22.70760 Y-28.27020 | |
| X22.75840 Y-28.39720 | |
| X24.76500 Y-28.42260 | |
| X24.76500 Y-26.44140 | |
| X22.70760 Y-26.44140 | |
| X22.70760 Y-26.69540 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-24.71420 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-24.71420 | |
| X22.70760 Y-26.44140 | |
| X24.76500 Y-26.44140 | |
| X24.76500 Y-24.43480 | |
| X22.70760 Y-24.43480 | |
| X22.70760 Y-24.71420 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-22.70760 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-22.70760 | |
| X22.70760 Y-24.43480 | |
| X24.76500 Y-24.43480 | |
| X24.76500 Y-22.42820 | |
| X22.70760 Y-22.42820 | |
| X22.70760 Y-22.70760 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-20.70100 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-20.70100 | |
| X22.70760 Y-22.42820 | |
| X24.76500 Y-22.42820 | |
| X24.76500 Y-20.42160 | |
| X22.70760 Y-20.42160 | |
| X22.70760 Y-20.70100 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-18.69440 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-18.69440 | |
| X22.70760 Y-20.42160 | |
| X24.76500 Y-20.42160 | |
| X24.76500 Y-18.44040 | |
| X22.70760 Y-18.44040 | |
| X22.70760 Y-18.69440 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-16.71320 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-16.71320 | |
| X22.70760 Y-18.44040 | |
| X24.76500 Y-18.44040 | |
| X24.76500 Y-16.43380 | |
| X22.70760 Y-16.43380 | |
| X22.70760 Y-16.71320 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-14.70660 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-14.70660 | |
| X22.70760 Y-16.43380 | |
| X24.76500 Y-16.43380 | |
| X24.76500 Y-14.42720 | |
| X22.70760 Y-14.42720 | |
| X22.70760 Y-14.70660 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-12.70000 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-12.70000 | |
| X22.70760 Y-14.42720 | |
| X24.76500 Y-14.42720 | |
| X24.76500 Y-12.42060 | |
| X22.70760 Y-12.42060 | |
| X22.70760 Y-12.70000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-10.69340 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-10.69340 | |
| X22.70760 Y-12.42060 | |
| X24.76500 Y-12.42060 | |
| X24.76500 Y-10.38860 | |
| X22.70760 Y-10.38860 | |
| X22.70760 Y-10.69340 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X0.60960 Y-10.69340 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X0.60960 Y-10.69340 | |
| X0.60960 Y-12.42060 | |
| X2.66700 Y-12.42060 | |
| X2.66700 Y-11.86180 | |
| X2.81940 Y-11.86180 | |
| X3.37820 Y-12.42060 | |
| X3.37820 Y-13.69060 | |
| X3.42900 Y-13.79220 | |
| X3.45440 Y-28.34640 | |
| X3.47980 Y-28.42260 | |
| X5.20700 Y-30.14980 | |
| X5.53720 Y-30.25140 | |
| X5.63880 Y-30.37840 | |
| X5.68960 Y-30.37840 | |
| X5.76580 Y-30.45460 | |
| X5.76580 Y-30.50540 | |
| X5.91820 Y-30.63240 | |
| X6.01980 Y-30.96260 | |
| X7.13740 Y-32.05480 | |
| X7.03580 Y-32.05480 | |
| X7.01040 Y-32.10560 | |
| X6.80720 Y-32.20720 | |
| X6.80720 Y-32.25800 | |
| X6.68020 Y-32.38500 | |
| X6.62940 Y-32.58820 | |
| X6.62940 Y-33.42640 | |
| X6.68020 Y-33.62960 | |
| X6.80720 Y-33.75660 | |
| X6.80720 Y-33.80740 | |
| X7.01040 Y-33.90900 | |
| X7.03580 Y-33.95980 | |
| X7.16280 Y-33.98520 | |
| X8.17880 Y-33.95980 | |
| X8.20420 Y-33.90900 | |
| X8.40740 Y-33.80740 | |
| X8.48360 Y-33.62960 | |
| X8.50900 Y-32.51200 | |
| X8.45820 Y-32.28340 | |
| X8.40740 Y-32.25800 | |
| X8.38200 Y-32.18180 | |
| X8.20420 Y-32.10560 | |
| X8.17880 Y-32.05480 | |
| X8.05180 Y-32.05480 | |
| X8.02640 Y-31.34360 | |
| X5.66420 Y-28.98140 | |
| X5.43560 Y-28.93060 | |
| X4.82600 Y-28.29560 | |
| X4.82600 Y-28.24480 | |
| X4.21640 Y-27.63520 | |
| X4.21640 Y-19.35480 | |
| X4.26720 Y-19.25320 | |
| X4.26720 Y-16.20520 | |
| X4.16560 Y-16.12900 | |
| X4.16560 Y-14.32560 | |
| X4.26720 Y-14.24940 | |
| X4.26720 Y-11.73480 | |
| X3.50520 Y-10.97280 | |
| X2.66700 Y-10.97280 | |
| X2.66700 Y-10.38860 | |
| X0.60960 Y-10.38860 | |
| X0.60960 Y-10.69340 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X16.43380 Y-39.06520 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X16.43380 Y-39.06520 | |
| X15.46860 Y-40.03040 | |
| X13.66520 Y-40.03040 | |
| X13.66520 Y-39.64940 | |
| X11.91260 Y-39.64940 | |
| X11.76020 Y-39.70020 | |
| X11.70940 Y-39.85260 | |
| X11.70940 Y-41.40200 | |
| X11.76020 Y-41.55440 | |
| X11.91260 Y-41.60520 | |
| X13.66520 Y-41.60520 | |
| X13.66520 Y-41.22420 | |
| X16.23060 Y-41.22420 | |
| X16.33220 Y-41.17340 | |
| X17.52600 Y-39.95420 | |
| X18.64360 Y-39.95420 | |
| X19.63420 Y-40.94480 | |
| X19.48180 Y-41.02100 | |
| X19.48180 Y-41.07180 | |
| X19.30400 Y-41.27500 | |
| X19.25320 Y-41.52900 | |
| X19.25320 Y-42.26560 | |
| X19.30400 Y-42.51960 | |
| X19.48180 Y-42.72280 | |
| X19.48180 Y-42.77360 | |
| X19.58340 Y-42.79900 | |
| X19.71040 Y-42.90060 | |
| X19.93900 Y-42.95140 | |
| X20.67560 Y-42.95140 | |
| X20.90420 Y-42.90060 | |
| X21.03120 Y-42.79900 | |
| X21.13280 Y-42.77360 | |
| X21.13280 Y-42.72280 | |
| X21.31060 Y-42.51960 | |
| X21.36140 Y-42.26560 | |
| X21.36140 Y-41.52900 | |
| X21.31060 Y-41.27500 | |
| X21.25980 Y-41.24960 | |
| X21.20900 Y-41.12260 | |
| X21.13280 Y-41.07180 | |
| X21.13280 Y-41.02100 | |
| X20.90420 Y-40.91940 | |
| X20.90420 Y-40.25900 | |
| X20.85340 Y-40.15740 | |
| X19.50720 Y-38.81120 | |
| X19.38020 Y-38.76040 | |
| X16.78940 Y-38.76040 | |
| X16.66240 Y-38.81120 | |
| X16.43380 Y-39.06520 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-38.70960 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-38.70960 | |
| X22.70760 Y-40.43680 | |
| X24.76500 Y-40.43680 | |
| X24.76500 Y-38.43020 | |
| X22.70760 Y-38.43020 | |
| X22.70760 Y-38.70960 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-36.70300 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-36.70300 | |
| X22.70760 Y-38.43020 | |
| X24.76500 Y-38.43020 | |
| X24.76500 Y-36.42360 | |
| X22.70760 Y-36.42360 | |
| X22.70760 Y-36.70300 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-34.69640 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-34.69640 | |
| X22.70760 Y-36.42360 | |
| X24.76500 Y-36.42360 | |
| X24.76500 Y-34.41700 | |
| X22.70760 Y-34.41700 | |
| X22.70760 Y-34.69640 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X22.70760 Y-40.69080 ( rapid move to begin. ) | |
| F250.00000 | |
| G01 Z-0.08000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F500.00000 | |
| X22.70760 Y-40.69080 | |
| X22.70760 Y-42.44340 | |
| X24.76500 Y-42.44340 | |
| X24.76500 Y-40.43680 | |
| X22.70760 Y-40.43680 | |
| X22.70760 Y-40.69080 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z20.00000 ( retract ) | |
| M5 ( Spindle off. ) | |
| M9 ( Coolant off. ) | |
| M2 ( Program end. ) | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ( pcb2gcode 1.2.2 ) | |
| ( This file uses 3 drill bit sizes. ) | |
| ( Bit sizes: [0.8mm] [0.813mm] [1.524mm] ) | |
| G94 (Millimeters per minute feed rate.) | |
| G21 (Units == Millimeters.) | |
| G90 (Absolute coordinates.) | |
| S0 (RPM spindle speed.) | |
| G00 Z20.00000 (Retract) | |
| T1 | |
| M5 (Spindle stop.) | |
| (MSG, Change tool bit to drill size 0.80000 mm) | |
| M6 (Tool change.) | |
| M0 (Temporary machine stop.) | |
| M3 (Spindle on clockwise.) | |
| F500.00000 | |
| G0 X1.65100 Y-11.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-13.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-15.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-17.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-19.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-21.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-23.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-25.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-27.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-29.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-31.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-33.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-35.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-37.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-39.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X1.65100 Y-41.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X5.08000 Y-31.11500 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X17.78000 Y-31.11500 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-31.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-29.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-27.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-25.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-23.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-21.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-19.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-17.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-15.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-13.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-11.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X19.05000 Y-13.33500 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X16.51000 Y-10.79500 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X16.51000 Y-15.87500 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-33.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-35.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-37.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-39.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X23.74900 Y-41.43000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G00 Z20.00000 (Retract) | |
| T2 | |
| M5 (Spindle stop.) | |
| (MSG, Change tool bit to drill size 0.81300 mm) | |
| M6 (Tool change.) | |
| M0 (Temporary machine stop.) | |
| M3 (Spindle on clockwise.) | |
| F500.00000 | |
| G0 X5.08000 Y-7.62000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X7.62000 Y-7.62000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X10.16000 Y-7.62000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X12.70000 Y-7.62000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X12.70000 Y-15.24000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X10.16000 Y-15.24000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X7.62000 Y-15.24000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X5.08000 Y-15.24000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X6.35000 Y-19.05000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X8.89000 Y-19.05000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X11.43000 Y-19.05000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X13.97000 Y-19.05000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X16.51000 Y-19.05000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X19.05000 Y-19.05000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X19.05000 Y-26.67000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X16.51000 Y-26.67000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X13.97000 Y-29.21000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X11.43000 Y-26.67000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X8.89000 Y-26.67000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X6.35000 Y-26.67000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X7.62000 Y-33.02000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X10.16000 Y-33.02000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X12.70000 Y-33.02000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X17.78000 Y-34.29000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X20.32000 Y-31.75000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X20.32000 Y-41.91000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X17.78000 Y-41.91000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X12.70000 Y-40.64000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X10.16000 Y-40.64000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X7.62000 Y-40.64000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X5.08000 Y-40.64000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X5.08000 Y-33.02000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G00 Z20.00000 (Retract) | |
| T3 | |
| M5 (Spindle stop.) | |
| (MSG, Change tool bit to drill size 1.52400 mm) | |
| M6 (Tool change.) | |
| M0 (Temporary machine stop.) | |
| M3 (Spindle on clockwise.) | |
| F500.00000 | |
| G0 X5.08000 Y-2.54000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X10.16000 Y-2.54000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X15.24000 Y-2.54000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G0 X20.32000 Y-2.54000 | |
| G1 Z-2.00000 | |
| G1 Z2.00000 | |
| G00 Z20.00000 (All done -- retract) | |
| M5 (Spindle off.) | |
| M9 (Coolant off.) | |
| M2 (Program end.) | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ( pcb2gcode 1.2.2 ) | |
| ( Software-independent Gcode ) | |
| G94 ( Millimeters per minute feed rate. ) | |
| G21 ( Units == Millimeters. ) | |
| G90 ( Absolute coordinates. ) | |
| S0 ( RPM spindle speed. ) | |
| G64 P0.05080 ( set maximum deviation from commanded toolpath ) | |
| F200.00000 ( Feedrate. ) | |
| F200.00000 ( Feedrate. ) | |
| M3 ( Spindle on clockwise. ) | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z2.00000 ( retract ) | |
| G00 X25.47620 Y-0.43180 ( rapid move to begin. ) | |
| G01 Z-1.70000 F100.00000 ( plunge. ) | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| F200.00000 | |
| X25.47620 Y-0.43180 | |
| X25.47620 Y-19.81860 | |
| Z2.00000 | |
| X25.47620 Y-23.81860 | |
| Z-1.70000 F100.00000 | |
| F200.00000X25.47620 Y-43.20540 | |
| X17.83080 Y-50.85080 | |
| X7.59460 Y-50.85080 | |
| X-0.05080 Y-43.20540 | |
| X-0.05080 Y-23.57730 | |
| Z2.00000 | |
| X-0.05080 Y-19.57730 | |
| Z-1.70000 F100.00000 | |
| F200.00000X-0.05080 Y0.05080 | |
| X25.45080 Y0.07620 | |
| X25.47620 Y-0.43180 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z20.00000 ( retract ) | |
| M5 ( Spindle off. ) | |
| M9 ( Coolant off. ) | |
| M2 ( Program end. ) | |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment