README

```
git clone [email protected]:4e50075ea7d9669e85856dfe999dee7e.git docker-mongodb-sharded && cd docker-mongodb-sharded
```

```
bash run.sh 6.0.0-rc4 28000
```

```
mongosh --port 28000
```

Dockerfile

FROM ubuntu:20.04
EXPOSE 27017

ARG  MONGODB_VERSION=6.0.0-rc4

RUN apt-get update -y && apt-get install -y \
  curl libcurl4 libgssapi-krb5-2 libldap-2.4-2 libwrap0 \
  libsasl2-2 libsasl2-modules libsasl2-modules-gssapi-mit \
  snmp openssl liblzma5

RUN curl -f "https://downloads.mongodb.com/linux/mongodb-linux-x86_64-enterprise-ubuntu2004-${MONGODB_VERSION}.tgz" | tar -xz
RUN curl -f "https://downloads.mongodb.com/compass/mongodb-mongosh_1.3.1_amd64.deb" > "/mongodb-mongosh_1.3.1_amd64.deb"
RUN dpkg -i mongodb-mongosh_1.3.1_amd64.deb
COPY rscs_shards.sh /rscs_shards.sh
ENV  BUILT_MONGODB_VERSION=${MONGODB_VERSION}
CMD ["bash", "-c", "bash /rscs_shards.sh mongodb-linux-x86_64-enterprise-ubuntu2004-${BUILT_MONGODB_VERSION}/bin"]

rscs_shards.sh

#!/usr/bin/env bash

if [ $# -ne 1 ] && [ $# -ne 2 ] && [ $# -ne 3 ] ; then
    echo "Usage: rscs_shards.sh <mongodb_path> --debug? --quiet?"
    echo "    --debug doesn't run anything, just runs the mongo and mongod commands that would be run"
    echo "    --quiet pipes the server output to dev/null (warning, could miss errors then)"
    exit
fi

MONGODB_PATH="$1"
RS="myconfig"
SRS="myshard"
DBPATH="rscs_shards/data-$RS"
CPATH="$DBPATH/config"
SPATH="$DBPATH/shards"
P0=$((3 * $RS))
C_PORT=$((37017+$P0))
S_PORT=$((47017+$P0))
PORT="
27017"
PIDS=()

shift 3 # TODO: eventually can check first 3 args for right format

while test $# -gt 0
do
    case "$1" in
        --debug) DEBUG='true'
            ;;
        --quiet) QUIET='true'
            ;;
        *):
            ;;
    esac
    shift
done

function clean_up {
    echo "PIDS" ${PIDS[@]}
    kill ${PIDS[@]}
    exit
}

function mongo_cmd {
    if [[ "$1" = "config" ]]; then
        cfg="{
            _id: 'rs-$RS',
            configsvr: true,
            members: [
                {_id: 0, host: 'localhost:$C_PORT'},
                {_id: 1, host: 'localhost:$(($C_PORT+1))'},
                {_id: 2, host: 'localhost:$(($C_PORT+2))'}
            ]
        }"
        port=$C_PORT
    else
        cfg="{
            _id: 'rs-shard-$SRS',
            members: [
                {_id: 0, host: 'localhost:$S_PORT'},
                {_id: 1, host: 'localhost:$(($S_PORT+1))'},
                {_id: 2, host: 'localhost:$(($S_PORT+2))'}
            ]
        }"
        port=$S_PORT
    fi


    if [[ "$DEBUG" ]]; then
        echo "mongosh --port $port --eval \"JSON.stringify(rs.initiate($cfg))\""
    else
        echo "Initiating repl shard with $cfg on port $port"
        sleep 2
        mongosh --port $port --eval "JSON.stringify(rs.initiate($cfg))"
        sleep 2
    fi
}

function debug {
    if [[ "$DEBUG" ]] && [[ "$1" = "skip" ]]; then :
    elif [[ "$DEBUG" ]] && [[ "$1" = "quiet" ]]; then
        shift 1
        echo "$@"
    elif [[ "$DEBUG" ]]; then
        echo "$@"
    elif [[ "$1" = "skip" ]]; then
       shift 1
       $@
    elif [[ -z "$QUIET" ]] && [[ "$1" = "quiet" ]]; then
       shift 1
       $@ &
    elif [[ "$1" = "quiet" ]]; then
       shift 1
       $@ > /dev/null &
    else
       $@
    fi
}

trap clean_up SIGHUP SIGINT SIGTERM


debug rm -rf $DBPATH
debug mkdir -p "$CPATH/configdb-0" "$CPATH/configdb-1" "$CPATH/configdb-2" "$SPATH/rs-$RS-0" "$SPATH/rs-$RS-1" "$SPATH/rs-$RS-2"

# Start config repl set
debug 'quiet' $MONGODB_PATH/mongod --configsvr --replSet="rs-$RS" --port $C_PORT --dbpath="$CPATH/configdb-0"
PIDS[${#PIDS[@]}]="$!"
debug 'quiet' $MONGODB_PATH/mongod --configsvr --replSet="rs-$RS" --port $(($C_PORT+1)) --dbpath="$CPATH/configdb-1"
PIDS[${#PIDS[@]}]="$!"
debug 'quiet' $MONGODB_PATH/mongod --configsvr --replSet="rs-$RS" --port $(($C_PORT+2)) --dbpath="$CPATH/configdb-2"
PIDS[${#PIDS[@]}]="$!"

debug "skip" sleep 2

mongo_cmd 'config'

# Start replset shard
debug 'quiet' $MONGODB_PATH/mongod --shardsvr --replSet="rs-shard-$SRS" --port $S_PORT --dbpath="$SPATH/rs-$RS-0"
PIDS[${#PIDS[@]}]="$!"
debug 'quiet' $MONGODB_PATH/mongod --shardsvr --replSet="rs-shard-$SRS" --port $(($S_PORT+1)) --dbpath="$SPATH/rs-$RS-1"
PIDS[${#PIDS[@]}]="$!"
debug 'quiet' $MONGODB_PATH/mongod --shardsvr --replSet="rs-shard-$SRS" --port $(($S_PORT+2)) --dbpath="$SPATH/rs-$RS-2"
PIDS[${#PIDS[@]}]="$!"

# Start mongos
debug 'quiet' $MONGODB_PATH/mongos --configdb "rs-$RS/localhost:$C_PORT,localhost:$(($C_PORT+1)),localhost:$(($C_PORT+2))" --port $PORT --bind_ip_all
PIDS[${#PIDS[@]}]="$!"

debug "skip" sleep 2

mongo_cmd 'shard'

debug "skip" sleep 10
debug mongosh --port $PORT --eval "JSON.stringify(sh.addShard(\"rs-shard-$SRS/localhost:$(($S_PORT))\"))"


debug mongosh --port $PORT --eval "JSON.stringify(sh.enableSharding('test'))"

debug "skip" cat


# wait for all pids

for pid in ${PIDS[*]}; do
    wait $pid
done

run.sh

#!/usr/bin/env bash

set -e

if [ $# -ne 2 ]; then
    echo "Usage: build.sh <mongodb_version> <port>"
    exit
fi

docker build --platform linux/amd64 \
  --build-arg MONGODB_VERSION=$1 \
  -t mongodb-rc:$1 .

docker run -p "$2:27017" \
  --platform linux/amd64 \
  "mongodb-rc:$1"