seeed lora e5 helium au915

# check device is responding
AT

# verbose logging
AT+LOG=DEBUG

# switch to AU915
AT+DR=AU915

# before 2022-11-17
# switch to FSB2 (uplink 916.8 - 918.2, downlink 923.9 MHz)
# AT+CH=NUM 8-15

# ch8 = 916.8 mhz
# ch9 = 917.0 mhz
# ch10 = 917.2 mhz
# ch11 = 917.4 mhz
# ch12 = 917.6 mhz
# ch13 = 917.8 mhz
# ch14 = 918.0 mhz
# ch15 = 918.2 mhz

# after 2022-11-17
# switch to FSB6 (uplink 923.2 - 924.6, downlink 926.9 MHz)
AT+CH=NUM 40-47

# ch40 = 923.2 mhz
# ch41 = 923.4 mhz
# ch42 = 923.6 mhz
# ch43 = 923.8 mhz
# ch44 = 924.0 mhz
# ch45 = 924.2 mhz
# ch46 = 924.4 mhz
# ch47 = 924.6 mhz

# get all supported data rates
AT+DR=SCHEME

# helium uses OTAA
AT+MODE=LWOTAA

# get your ids
AT+ID

# create you device on the helium console
# set your ids
AT+ID=DevEui, "60:81:XX:XX:XX:XX:XX:XX"
AT+ID=AppEui, "60:81:XX:XX:XX:XX:XX:XX"
AT+KEY=APPKEY,"00112233445566778899AABBCCDDEEFF"

# set max power
AT+POWER=22

# connect
AT+JOIN

# send text message
AT+MSG="Hello"

# send the same message in hex
AT+MSGHEX="48 65 6c 6c 6f"