EAP300 v2 Openwrt Master boot log (firstboot)

boot.log

Hit any key to stop autoboot:  0
Validating MD5Sum of 'vmlinux'... Passed!
Validating MD5Sum of 'rootfs'... Passed!
## Booting image at 9f0a0000 ...
   Image Name:   MIPS OpenWrt Linux-5.4.74
   Created:      2020-11-05   9:50:46 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3265 Bytes =  3.2 kB
   Load Address: 80060000
   Entry Point:  80060000
   Verifying Checksum at 0x9f0a0040 ...OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80060000) ...
## Giving linux memsize in bytes, 67108864

Starting kernel ...



OpenWrt kernel loader for AR7XXX/AR9XXX
Copyright (C) 2011 Gabor Juhos <[email protected]>
Looking for OpenWrt image... found at 0xbf230000
Decompressing kernel... done!
Starting kernel at 80060000...

[    0.000000] Linux version 5.4.74 (pi@SDDesk) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13719+835-66e04abbb6)) #0 Thu Nov 5 09:50:46 2020
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
[    0.000000] MIPS: machine is Engenius EAP300 v2
[    0.000000] SoC: Atheros AR9341 rev 1
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 16240
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 57348K/65536K available (4771K kernel code, 190K rwdata, 1100K rodata, 1228K init, 196K bss, 8188K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS: 51
[    0.000000] random: get_random_bytes called from start_kernel+0x32c/0x518 with crng_init=0
[    0.000000] CPU clock: 535.000 MHz
[    0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7144898866 ns
[    0.000010] sched_clock: 32 bits at 267MHz, resolution 3ns, wraps every 8027976190ns
[    0.008328] Calibrating delay loop... 267.26 BogoMIPS (lpj=534528)
[    0.050922] pid_max: default: 32768 minimum: 301
[    0.056022] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.063823] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.077465] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.087902] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
[    0.095307] pinctrl core: initialized pinctrl subsystem
[    0.102170] NET: Registered protocol family 16
[    0.143234] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
[    0.157778] clocksource: Switched to clocksource MIPS
[    0.164641] NET: Registered protocol family 2
[    0.170360] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    0.179353] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.187539] TCP bind hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.195068] TCP: Hash tables configured (established 1024 bind 1024)
[    0.202009] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.209043] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
[    0.216878] NET: Registered protocol family 1
[    0.221601] PCI: CLS 0 bytes, default 32
[    0.230594] workingset: timestamp_bits=14 max_order=14 bucket_order=0
[    0.245937] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.252169] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.282861] pinctrl-single 1804002c.pinmux: 544 pins, size 68
[    0.290308] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.298069] printk: console [ttyS0] disabled
[    0.302716] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
[    0.311932] printk: console [ttyS0] enabled
[    0.311932] printk: console [ttyS0] enabled
[    0.320844] printk: bootconsole [early0] disabled
[    0.320844] printk: bootconsole [early0] disabled
[    0.339286] spi-nor spi0.0: mx25l12805d (16384 Kbytes)
[    0.344658] 9 fixed-partitions partitions found on MTD device spi0.0
[    0.351130] Creating 9 MTD partitions on "spi0.0":
[    0.356022] 0x000000000000-0x000000040000 : "u-boot"
[    0.362382] 0x000000040000-0x000000050000 : "u-boot-env"
[    0.368940] 0x000000050000-0x0000000a0000 : "custom"
[    0.375214] 0x0000000a0000-0x0000000b0000 : "loader"
[    0.381454] 0x0000000b0000-0x000000220000 : "firmware2"
[    0.387976] 0x000000220000-0x000000230000 : "fakeroot"
[    0.394484] 0x000000230000-0x000000df0000 : "firmware1"
[    0.400971] 0x000000df0000-0x000000ff0000 : "failsafe"
[    0.407436] 0x000000ff0000-0x000001000000 : "art"
[    0.413737] Concatenating MTD devices:
[    0.417621] (0): "firmware1"
[    0.420561] (1): "firmware2"
[    0.423498] into device "virtual_flash"
[    0.427452] 1 fixed-partitions partitions found on MTD device virtual_flash
[    0.434532] Creating 1 MTD partitions on "virtual_flash":
[    0.440034] 0x000000000000-0x000000d30000 : "firmware"
[    0.458164] 2 okli-fw partitions found on MTD device firmware
[    0.464048] Creating 2 MTD partitions on "firmware":
[    0.469107] 0x000000000000-0x0000001f0000 : "kernel"
[    0.475287] 0x0000001f0000-0x000000d30000 : "rootfs"
[    0.481504] mtd: device 11 (rootfs) set to be root filesystem
[    0.489524] 1 squashfs-split partitions found on MTD device rootfs
[    0.495899] 0x000000510000-0x000000d30000 : "rootfs_data"
[    0.504908] libphy: Fixed MDIO Bus: probed
[    0.826233] libphy: ag71xx_mdio: probed
[    0.831528] libphy: ar8xxx-mdio: probed
[    0.843603] switch0: Atheros AR8229 rev. 1 switch registered on mdio.0
[    1.145773] random: fast init done
[    1.203749] ag71xx 19000000.eth: connected to PHY at mdio.0:1f:00 [uid=004dd042, driver=Generic PHY]
[    1.213867] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
[    1.220246] i2c /dev entries driver
[    1.226509] NET: Registered protocol family 10
[    1.237131] Segment Routing with IPv6
[    1.241068] NET: Registered protocol family 17
[    1.245686] 8021q: 802.1Q VLAN Support v1.8
[    1.255405] VFS: Mounted root (squashfs filesystem) readonly on device 31:11.
[    1.270755] Freeing unused kernel memory: 1228K
[    1.275388] This architecture does not have kernel memory protection.
[    1.281932] Run /sbin/init as init process
[    1.961227] init: Console is alive
[    1.965112] init: - watchdog -
[    2.898582] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.083851] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.101909] init: - preinit -
[    4.370853] random: jshn: uninitialized urandom read (4 bytes read)
[    4.525235] random: jshn: uninitialized urandom read (4 bytes read)
[    4.584146] random: jshn: uninitialized urandom read (4 bytes read)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    6.891824] eth0: link up (100Mbps/Full duplex)
[    6.896492] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.126419] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[    9.133810] jffs2_build_filesystem(): unlocking the mtd device...
[    9.133817] done.
[    9.142053] jffs2_build_filesystem(): erasing all blocks after the end marker...
[   53.357848] random: crng init done
[   53.368891] random: 5 urandom warning(s) missed due to ratelimiting
[   63.133085] done.
[   63.135112] jffs2: notice: (530) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[   63.152622] mount_root: overlay filesystem has not been fully initialized yet
[   63.161093] mount_root: switching to jffs2 overlay
[   63.170255] overlayfs: upper fs does not support tmpfile.
[   63.180834] urandom-seed: Seed file not found (/etc/urandom.seed)
[   63.305270] eth0: link down
[   63.324155] procd: - early -
[   63.327299] procd: - watchdog -
[   63.995948] procd: - watchdog -
[   63.999576] procd: - ubus -
[   64.327706] procd: - init -
Please press Enter to activate this console.
[   65.535364] kmodloader: loading kernel modules from /etc/modules.d/*
[   65.834007] Loading modules backported from Linux version v5.8-0-gbcf876870b95
[   65.841381] Backport generated by backports.git v5.8-1-0-g79400d9e
[   65.917976] xt_time: kernel timezone is -0000
[   66.106128] urngd: v1.0.2 started.
[   66.173967] PPP generic driver version 2.4.2
[   66.186015] NET: Registered protocol family 24
[   66.331132] ieee80211 phy0: Atheros AR9340 Rev:1 mem=0xb8100000, irq=2
[   66.446288] kmodloader: done loading kernel modules from /etc/modules.d/*
[  128.624224] br-lan: port 1(eth0) entered blocking state
[  128.629606] br-lan: port 1(eth0) entered disabled state
[  128.635334] device eth0 entered promiscuous mode
[  130.667919] eth0: link up (100Mbps/Full duplex)
[  130.678778] br-lan: port 1(eth0) entered blocking state
[  130.684155] br-lan: port 1(eth0) entered forwarding state
[  130.723200] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready