NXP ls1028 Felix Ubuntu Router Setup

gistfile1.txt

#!/bin/bash
#
# Simple switch configuration
#
# Assume both ENETC and Felix drivers are already loaded
#
 
BRIDGE=br0
MAC_ROOT=bc:8d:bf:7c:5b
 

# Create bridge device in net namespace
ip link add name $BRIDGE type bridge
ip link set $BRIDGE up
 
# Configure switch ports
#  * set MAC address
#  * bring up interface
#  * move net device into the bridge net namespace
#  * set bridge device as master
swps=($(ls /sys/bus/pci/devices/0000:00:00.5/net/))
nr=${#swps[@]}
for (( i=0; i<$nr; i++ ))
do
   echo "adding ${swps[$i]} to bridge .."
   ip link set ${swps[$i]} address $MAC_ROOT:$(echo "${swps[$i]}" | tr -dc '0-9')
   ip link set ${swps[$i]} master $BRIDGE
   ip link set ${swps[$i]} up
done
 
# bring up ENETC ports connected to switch ports
enetc2=$(ls /sys/bus/pci/devices/0000:00:00.2/net/)
ip link set $enetc2 up
 
# move ENETC port connected to switch CPU port in bridge ns
enetc3=$(ls /sys/bus/pci/devices/0000:00:00.0/net/)
ip link set $enetc3 up
 
# Check configuration
bridge link show

# Add IP address to bridge
ip addr add 192.168.2.1/24 dev br0