For checking health of usb hdd on raspberry pi with smartctl.

smartctl_test.md

for testing external hdd with smartctl,

install smartmontools

$ sudo apt-get install smartmontools

start test,

#$ sudo smartctl -t short -d sat /dev/sda
$ sudo smartctl -t long -d sat /dev/sda -T permissive

then it will say

Testing has begun.
Please wait 100 minutes for test to complete.
Test will complete after Thu Oct  6 11:36:22 2016

so wait for it...

After its completion,

$ sudo smartctl -l selftest -d sat /dev/sda -T permissive

to see the test result.

Is it possible to run this command twice (for two harddrives) like a queue? Thank you!

How do you use this on NVME drives?
"sudo smartctl -t long -d sat /dev/nvme0 -T permissive"
Is accepted as command however "Read Device Identity failed: Inappropriate ioctl for device"
error is shown

NVME drives need something like sudo smartctl -t long -d nvme /dev/nvme0 -T permissive to start the test and sudo smartctl -l selftest -d nvme /dev/nvme0 -T permissive to see the result