script for ipmi setup

ipmi-setup.sh

#!/usr/bin/env bash

# Base ipmi access setup script to be run from BMC

set -u

tgtip=xxx.xxx.xxx.xxx
tgtnet=$(echo $tgtip | cut -f1-3 -d\.)
# intel S2600: 2
# supermicro: 0
lanchannel=2


identify_sys(){
    sleep 30 ; ipmitool chassis identify
}


show_current_cfg() {
    ipmitool lan print 2
    ipmitool user list 2
}


set_nic_to_shared() {
# here is the command for supermicro
# for intel, the channel ID seems to be sufficient.
  
    # this info is from the following thread (as usual, scroll down for the valuable answers)
    # https://serverfault.com/questions/361940/configuring-supermicro-ipmi-to-use-one-of-the-lan-interfaces-instead-of-the-ipmi
    # To get LAN mode: ipmitool raw 0x30 0x70 0x0c 0.
    # To set LAN mode dedicated: ipmitool raw 0x30 0x70 0x0c 1 0.
    # To set LAN mode onboard/shared: ipmitool raw 0x30 0x70 0x0c 1 1.
    # To set LAN mode failover: ipmitool raw 0x30 0x70 0x0c 1 2.
    echo "not implemented"
}


set_ip_params(){
    ipmitool lan set "${lanchannel}"  ipaddr "${tgtip}"
    ipmitool lan set "${lanchannel}"  netmask 255.255.255.0
    ipmitool lan set "${lanchannel}"  defgw ipaddr ${tgtnet}.1
}


set_user_params() {
    ipmitool user set password "${lanchannel}" superuser
    ipmitool lan set "${lanchannel}" access on
    ipmitool user enable "${lanchannel}"
    ipmitool lan set "${lanchannel}" user
}


main() {
    identify_sys
    show_current_cfg
    set_ip_params
    set_user_params
}


main