oled_joystick_game_ardu.ino

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define OLED_RESET 4
Adafruit_SSD1306 display(OLED_RESET);

#define NUMFLAKES 10
#define XPOS 0
#define YPOS 1
#define DELTAY 2


#define LOGO16_GLCD_HEIGHT 16 
#define LOGO16_GLCD_WIDTH  16 
static const unsigned char PROGMEM logo16_glcd_bmp[] =
{ B00000000, B11000000,
  B00000001, B11000000,
  B00000001, B11000000,
  B00000011, B11100000,
  B11110011, B11100000,
  B11111110, B11111000,
  B01111110, B11111111,
  B00110011, B10011111,
  B00011111, B11111100,
  B00001101, B01110000,
  B00011011, B10100000,
  B00111111, B11100000,
  B00111111, B11110000,
  B01111100, B11110000,
  B01110000, B01110000,
  B00000000, B00110000 };

#if (SSD1306_LCDHEIGHT != 64)
#error("Height incorrect, please fix Adafruit_SSD1306.h!");
#endif

int punkte = 0;


void setup() {
  unsigned long beginn = millis();
  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
  display.clearDisplay();
  Serial.begin(9600);
  
  while((millis() - beginn) < 30000)
  {
  int zufall = random(1, 5);
  Serial.println(zufall);
  switch (zufall)
  {
    case 1:
      display.fillRect(0, 0, 64, 32, WHITE);  
      break;
    case 2:
      display.fillRect(64, 0, 64, 32, WHITE);  
      break;
    case 3:
      display.fillRect(0, 32, 64, 32, WHITE);  
      break;
    case 4:
      display.fillRect(64, 32, 64, 32, WHITE);  
      break;  
  }  
  display.display();

  
  joystick(zufall);
  display.clearDisplay();
  punkte = punkte + 1;  
    
  }
  display.clearDisplay();
  display.setCursor(0,0);
  display.setTextColor(WHITE);
  display.setTextSize(2);
  display.print("Score: ");
  display.print(punkte);
  display.display();
}  


void loop() {  
    
}

void joystick(int zufall)
{
  
  int xAchse = analogRead(A0);
  int yAchse = analogRead(A1);
  if(zufall == 1)
  {
    while( !((xAchse > 511) && (yAchse < 511)) )
    {
      delay(50); 
      xAchse = analogRead(A0);
      yAchse = analogRead(A1);
      Serial.println("falsch");
    }  
  }
  if(zufall == 2)
  {
    while( !((xAchse > 511) && (yAchse > 511)) )
    {
      delay(50);
      xAchse = analogRead(A0);
      yAchse = analogRead(A1);
      Serial.println("falsch");
    }  
  }
  if(zufall == 3)
  {
    while( !((xAchse < 511) && (yAchse < 511)) )
    {
      delay(50);
      xAchse = analogRead(A0);
      yAchse = analogRead(A1);
      Serial.println("falsch");
    }  
  }
  if(zufall == 4)
  {
    while( !((xAchse < 511) && (yAchse > 511)) )
    {
      delay(50);
      xAchse = analogRead(A0);
      yAchse = analogRead(A1);
      Serial.println("falsch");
    }  
  }
  Serial.println("richtig");
}