Mikal mikalv

WireGuard

How to set up WireGuard as an iOS VPN configuration in order to tunnel all traffic from an iOS or iPadOS device through a Linux server.

While there are many configurations possible, my intentation was to secure the traffic from my iOS device by routing it securely through a Linux server. As such, this HowTo will show you how to set-up an initial working configuration, which you can customize afterward.

Most likely things will be missing, such as how to configure the firewall or the init scripts on your Linux distribution. As it won't be possible to cover all Linux flavors this HowTo will attempt to give you a working WireGuard configuration, leaving it up to you to fill-in the blanks. Feel free to write a comment to touch upon your specific situation to help others that might stumble upon this HowTo :)

Note: In these configuration examples I use 10.8.0.1/24 and 10.8.0.2/24. However, as WireGuard IPs may not overlap your other network interfaces

UPDATE

Although below are methods to extract the contents of a macOS package without actually installing it, the best way might be to create a blank disk image and install the package to this disk image in order to inspect the package contents. To do so:

Open the Disk Utility app.
Choose "File > New Image > Blank Image". Alternatively, simply press CMD-N.
Set the parameters and click on "Save" to create the blank disk image.
After creation, it should be already mounted. If not, you can mount it by navigating to the directory that it is placed at and double clicking on the disk image file.
Run the package installer by double clicking on the package file.
Select this newly created blank disk image as the destination and install it.
If the script is preventing you from installing by saying, for example, "macOS isn't installed", you can:

Tabs

New Tab

:tabnew - new blank tab
:tabedit [file] - open file in tab

Cursor Movement

gt (:tabn) - next tab

About

This gist will show how to setup a generic SBC Debian / Ubuntu install as a headless Bluetooth A2DP audio sink. This will allow your phone, laptop or other Bluetooth device to play audio wirelessly through a Rasperry Pi.

Motivation

This is forked from another gist specific to the Raspberry Pi on Stretch. A required package isn't in Ubuntu's repos, so in this gist we build it from scratch.

Tested to be working on Armbian/Ubuntu/Debian images of the Orange Pi Zero, ODROID XU4, ODROID N2, and Atomic Pi.

Prerequisites

The setup of a bluetooth speaker on a Pi Zero W is pretty touchy.

Please get in touch via Twitter @actuino or http://www.actuino.fr/ if you've got comments or improvements to this quick draft.

First checks

Use a solid power source
check the speaker works on another hardware (android phone f.i.)
make sure you've updated your Raspbian, install and run rpi-update just in case.

This procedure was tested on FreeBSD-CURRENT build from d8819d88af52.

Enable linuxulator and install linux userland:

# sysrc linux_enable="YES"
# service linux start
# pkg install linux_base-c7

	AtomicNumber,Element,Symbol,AtomicMass,NumberofNeutrons,NumberofProtons,NumberofElectrons,Period,Group,Phase,Radioactive,Natural,Metal,Nonmetal,Metalloid,Type,AtomicRadius,Electronegativity,FirstIonization,Density,MeltingPoint,BoilingPoint,NumberOfIsotopes,Discoverer,Year,SpecificHeat,NumberofShells,NumberofValence
	1,Hydrogen,H,1.007,0,1,1,1,1,gas,,yes,,yes,,Nonmetal,0.79,2.2,13.5984,8.99E-05,14.175,20.28,3,Cavendish,1766,14.304,1,1
	2,Helium,He,4.002,2,2,2,1,18,gas,,yes,,yes,,Noble Gas,0.49,,24.5874,1.79E-04,,4.22,5,Janssen,1868,5.193,1,
	3,Lithium,Li,6.941,4,3,3,2,1,solid,,yes,yes,,,Alkali Metal,2.1,0.98,5.3917,5.34E-01,453.85,1615,5,Arfvedson,1817,3.582,2,1
	4,Beryllium,Be,9.012,5,4,4,2,2,solid,,yes,yes,,,Alkaline Earth Metal,1.4,1.57,9.3227,1.85E+00,1560.15,2742,6,Vaulquelin,1798,1.825,2,2
	5,Boron,B,10.811,6,5,5,2,13,solid,,yes,,,yes,Metalloid,1.2,2.04,8.298,2.34E+00,2573.15,4200,6,Gay-Lussac,1808,1.026,2,3
	6,Carbon,C,12.011,6,6,6,2,14,solid,,yes,,yes,,Nonmetal,0.91,2.55,11.2603,2.27E+00,3948.15,4300,7,Prehi

	import 'package:flutter/material.dart';
	import 'package:go_router/go_router.dart';

	main() {
	CustomNavigationHelper.instance;
	runApp(const App());
	}

	class App extends StatelessWidget {
	const App({Key? key}) : super(key: key);

	from __future__ import with_statement
	from kombu import BrokerConnection
	from collections import defaultdict
	import gevent
	from gevent import monkey
	monkey.patch_all()

	class WorkerHub():
	"""
	WorkerHub controls the local mailboxes that the @worker decorator assigns.