Mike mike325

Comparison chips (SoCs) table for ESP8266/ESP32/ESP32-S2/ESP32-S3/ESP32-C3/ESP32-C6

A minimal table to compare the Espressif's MCU families.

	ESP8266	ESP32	ESP32-S2	ESP32-S3	ESP32-C3	ESP32-C6
Announcement Date	2014, August	2016, September	2019, September	2020, December

Super Guide to the `split-window` tmux Subcommand (and Beyond)

Guide overview

tmux, like other great software, is deceptive. On the one hand, it's fairly easy to get set up and start using right away. On the other hand, it's difficult to take advantage of tmux's adanced features without spending some quality alone time with the manual. But the problem with manuals is that they aren't geared toward beginners. They are geared toward helping seasoned developers and computer enthusiasts quickly obtain the

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

Howto

Install these programms

sudo apt-get install gnome-raw-thumbnailer ufraw-batch

Try now if everything works, and your thumbnails show up. If not, try the following part.

	---Utility for keymap creation.
	---@param lhs string
	---@param rhs string\|function
	---@param opts string\|table
	---@param mode? string\|string[]
	local function keymap(lhs, rhs, opts, mode)
	opts = type(opts) == 'string' and { desc = opts }
	or vim.tbl_extend('error', opts --[[@as table]], { buffer = bufnr })
	mode = mode or 'n'
	vim.keymap.set(mode, lhs, rhs, opts)

	"""
	* TS0601 ZG-204ZM
	* _TZE200_kb5noeto
	* Works with HA 2024.11 - updated by @txip (Update 2)
	* https://de.aliexpress.com/item/1005006174074799.html ("Color": Mmwave PIR)
	* https://github.com/13717033460/zigbee-herdsman-converters/blob/6c9cf1b0de836ec2172d569568d3c7fe75268958/src/devices/tuya.ts#L5730-L5762
	* https://www.zigbee2mqtt.io/devices/ZG-204ZM.html
	* https://smarthomescene.com/reviews/zigbee-battery-powered-presence-sensor-zg-204zm-review/
	* https://doc.szalarm.com/zg-205ZL/cntop_zigbee_sensor.js
	* https://github.com/Koenkk/zigbee2mqtt/issues/21919

	import time
	import psutil
	import multiprocessing as mp
	from multiprocessing import Process
	from ctypes import *

	threadpin = CDLL(".\\threadpin.dll")
	print(threadpin.thread_assign_to_processor)

	def f(thread, duty, freq, q):

	#!/bin/bash

	TMUX_VERSION="2.1"
	LIBEVENT_VERSION="2.0.20"
	NCURSES_VERSION="6.0"

	# Script for installing tmux on systems where you don't have root access.
	# tmux will be installed in $HOME/local/bin.
	# It's assumed that wget and a C/C++ compiler are installed.