SRX playbook

root@gandalf# load factory-default
root@gandalf> request system zeroize

## system reboots into Amnisiac
## login as root no password

root@amnisiac# set system host-name gandalf
root@amnisiac# set system login message "Ya Shall Not Pass"

root@amniiac# commit 

## check our firmware
admin@gandalf> show system firmware
Part             Type           Tag Current   Available Status
                                    version   version
FPC 2
  PIC 0          VDSLBCM        10  2.16.0              OK
Routing Engine 0 RE BIOS        0   3.1       3.5       OK
Routing Engine 0 RE BIOS Backup 1   3.1       3.5       OK


## check JunOS version
admin@gandalf> show system software
Information for junos:

Comment:
JUNOS Software Release [15.1X49-D130.6]


root@gandalf# set system login user admin class super-user authentication plain-text-password


----------------------------------------------------------------------
SRX320 with VDSL2-A MPIM
----------------------------------------------------------------------

## Connect to console from linux:
install screen
screen /dev/ttyUSB0

## Reset to a known factory configuration (also regenerates keys and certificates):
root@amnisiac> request system zeroize

## Create root password:

login: root
root@% cli
root> conf
Entering configuration mode

[edit]
root# set system root-authentication plain-text-password 

## Create a non root admin user
[edit]
root# set system login user admin class super-user authentication plain-text-password

## Commit changes
[edit]
root# commit check 
configuration check succeeds

[edit]
root# commit comment "protect root and create admin user"
commit complete

## Log out and login as admin user
[edit]
root# exit 
Exiting configuration mode

root> exit 

root@% exit
logout

Amnesiac (ttyu0)

login: admin 
Password:

--- JUNOS 15.1X49-D120.3 built 2017-11-04 19:54:00 UTC
admin> 

## Set hostname
admin> configure 
Entering configuration mode

[edit]
admin# set system host-name gandalf
admin# commit
commit complete

[edit]

admin@gandalf>
admin@gandalf> set date ?
Possible completions:
  <time>               New date and time (YYYYMMDDhhmm.ss)
  ntp                  Set system date and time using Network Time Protocol servers

admin@gandalf> set date 201809061545.01
Thu Sep  6 15:45:01 UTC 2018

## There maybe a yellow alarm light
admin@gandalf> show chassis alarms
No alarms currently active

admin@gandalf> show system alarms
1 alarms currently active
Alarm time               Class  Description
2018-09-05 15:08:54 UTC  Minor  Rescue configuration is not set

## Clear alarm by setting rescue conf
admin@gandalf> request system configuration rescue save

## chassis yllow alarm should be off
admin@gandalf> show system alarms
No alarms currently active

admin@gandalf> show chassis environment
Class Item                           Status     Measurement
Temp  Routing Engine                 OK         49 degrees C / 120 degrees F
      Routing Engine CPU             OK         72 degrees C / 161 degrees F
Fans  SRX320 Chassis fan 0           OK         Spinning at normal speed
      SRX320 Chassis fan 1           OK         Spinning at normal speed
Power Power Supply 0                 OK

admin@gandalf> show chassis fan
      Item                      Status   RPM     Measurement
      SRX320 Chassis fan 0      OK       1740    Spinning at normal speed
      SRX320 Chassis fan 1      OK       1620    Spinning at normal speed