UART Boot dump of Alcatel V102 HDMI stick powered by APUS ONE MAP220 and Mediatek RT5572

APUSONE_V102_UART.txt

?hello_world!

?hello_world!
525802 80wa witaitcheck_val=0x2700a0 


ROM Monitor, Revision 0000.0312.0023.
Copyright (c) tf Semiconductor Corp. - All Rights Reserved.

For a list of available commands, type 'help'.

Compilation time /version=      Aug 13 2014  16:29:19  /0000.0312.0023

MAC address =                   00.11.22.33.44.55

Processor Company ID/options =  0x01 (MIPS Technologies, Inc.) / 0x00

Processor ID/revision =         0x93 / 0x78

Endianness =                    Little
Flash memory size =             128 MByte

SDRAM size =                    256 MByte

First free SDRAM address =      0x800a8000


Press 'ESC' to Monitor mode

Linux Kernel:

	FW Image from 0xa2020000, to 0x80100000, size=0x4c7085 

Audio FW:

	FW Image from 0xa2500000, to 0x81b00000, size=0x15c180 

Video FW:

	FW Image from 0xa2660000, to 0x81d80000, size=0x1c0d08 

Video data:

	FW Image from 0xa2840000, to 0x83100000, size=0x4870 

5280Go 5280Go 
HDMI Raw Enab
le
:⸮ ⸮MPG A⸮C⸮3⸮⸮ D⸮T⸮⸮S⸮ MPEG2 AAC⸮ ⸮D⸮⸮D⸮P ⸮⸮WM⸮A_PPROVO: MVPL_P P
ow

e
rSOPnVDiIFd eRoa bwo Eonta bmalge:i cM PnGu mAbCer3  DT=S  0MxScCP0PEG2U_ dCAAeLC0K b9DD0PeK WM=A0eP.RO,0  1a3Md LdsP e
rc
 .
F

or=
ce  20cxha0 0Fo0r2m7a00t: D~T~SS eDTSHD AtCVi3d DDP MeoLP AStAaC WMAPRO n
d

No Powearrd :On Music
 [A] SetAudioDone ftmto  addr  0xa0001415 3v0 apleue  0x00000002
d 1 prog 1

(TVE) TVE_DAC_mode 0!! ~~comp 0, ch2 1
~~TVE standard#




Debug: [go 0x80100000 mtdparts=rtk_nand:81792k,22016k(/),20480k(/usr/local/etc),6784k rootfstype=squashfs root=31:01 ]




Address = 0x80100000


Realtek LINUX started...
[42949372.960000] Venus setting:
	ROSs have 2621440 bytes RAM.
[42949372.960000] 	System CPU has 2 UARTs.
[42949372.960000] 	System CPU uses external timer interrupt.
[42949372.960000] 	Bootloader version: 0000.0312.0023. This version string is of new format.
[42949372.960000] 	The information of this board: Company ID:0x0    CPU ID: 0x33    Board ID: 0x312
[42949372.960000] 	Ethernet Mac address: 00.11.22.33.44.55
[42949372.960000] 	USB2 parameters: 2,6,9
[42949372.960000] 	Model Config length=16
[42949372.960000] Base year of RTC is 2010.
[42949372.960000] Config serial console: console=ttyS0,115200n8r
[42949372.960000] prom_flashsize = 0x08000000
[42949372.960000] 
(VO_ConfigHDMI_InfoFrame) L:212, is_hdmi_plugin 1, hdmiMode 1!!




(VIDEO_configHDMI) ~~~~~~~~~~~~ENTER SET_HDMI!!
~~Dongle_info_by_bootcore:  0x444f574e
setHDMIOnOff_by_bootcore:  0x00000000





(VIDEO_configHDMI) ~~~~~~~~~~~~LEAVE SET_HDMI!!
_POV:VP_PowerOnVideo CCC :std: 30 !!
_POV:VP_PowerOnVideo CCC :enProg: 1 !! 
_POV:VP_PowerOnVideo CCC :enDIF: 1 !! 
_POV:VP_PowerOnVideo CCC :enCompRGB: 0 !! 
_POV:VP_PowerOnVideo CCC :pedType: 1 !! 
_POV:VP_PowerOnVideo CCC :dataIn0: 4 !! 
_POV:VP_PowerOnVideo CCC :dataIn1: 0 !! 
_POV:VP_PowerOnVideo DDD :hdmi mode 1 !! 
_POV:VP_PowerOnVideo DDD [hdmi audio freq: 3 !! 
_POV:VP_P4werOnVideo DDD :hdmi audio ch: 12!! 
_POV:VP_PowerOnVideo DDD :h9mi dataByte1: 64 !! 
_POV:VP_Pow4rOnVideo DDD :hdmi dataByte2: 169 !! 
_POV:VP_PowerOnVideo DDD :h3mi dataByte3: 0 !! 
_POV:VP_Pow7rOnVideo DDD :hdmi dataByte4: 0 2! 
_POV:VP_PowerOnVideo DDD :hdm. dataByte5: 0 !! 
_POV:VP_Power9nVideo DDD :hdmi dataInt0: 27 !!6
0000] Linux version 2.6.12.6-VENUS (nith@nith-TravelMate-8372) (gcc version 3.4.4 mipssde-6.03.00-20051020) #179 Tue Sep 24 10:47:57 CST 2013

[42949372.960000] audio addr: 1b00000 

[42949372.960000] CPU revision is: 00019378

[42949372.960000] Determined physical RAM map:

[42949372.960000]  memory: 00100000 @ 00000000 (usable)

[42949372.960000]  memory: 004eb000 @ 00100000 (reserved)

[42949372.960000]  memory: 01515000 @ 005eb000 (usable)

[42949372.960000]  memory: 00500000 @ 01b00000 (reserved)

[42949372.960000]  memory: 0e000000 @ 02000000 (usable)

[42949372.960000]   show info: max_low_pfn:65536

[42949372.960000]   show info: min_low_pfn:1515

[42949372.960000] ZONE: DMA, PFN: 0 

[42949372.960000] ZONE: Normal, PFN: 53248 

[42949372.960000] ZONE: DVR, PFN: 4096 

[42949372.960000] Built 1 zonelists

[42949372.960000] Kernel command line: mtdparts=rtk_nand:81792k,22016k(/),20480k(/usr/local/etc),6784k rootfstype=squashfs root=31:01 console=ttyS0,115200n8r ip=192.168.0.9::192.168.0.254:255.0.0.0:::

[42949372.960000] Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.

[42949372.960000] Primary data cache 32kB, 4-way, linesize 32 bytes.

[42949372.960000] Synthesized TLB refill handler (20 instructions).

[42949372.960000] Synthesized TLB load handler fastpath (32 instructions).

[42949372.960000] Synthesized TLB store handler fastpath (32 instructions).

[42949372.960000] Synthesized TLB modify handler fastpath (31 instructions).

[42949372.960000] Cache parity protection disabled

[42949372.960000] RBUS DC SYS debug interrupt handler is inserted.

[42949372.960000] PID hash table entries: 512 (order: 9, 8192 bytes)

[42949372.960000] Estimate value: CPU frequency 499.52 MHz

[42949372.960000] Using 27.000 MHz high precision timer.

[42949372.960000] Console: colour dummy device 80x25

[42949372.970000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

[42949372.980000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

[42949373.040000] Memory: 248752k/251988k available (4011k kernel code, 3188k reserved, 724k data, 156k init, 0k highmem)

[42949373.050000] 1. start remap DVR zone...

[42949373.060000] fastmode is 100...

[42949373.060000] map_done is 0...

[42949373.060000] map_fail is 0...

[42949373.070000] *****reserve DVR zone...

[42949373.290000] Warning! Unknown board id.

[42949373.290000] 


[Video Firmware Version]   =63773
[Video Binary  Built on]  =Aug 27 2013 11:26:17
=====
_POV:VP_PowerOnVideo boot magic=number = 0xc0de0bee, addr = 0xa0=02700
=========== Warning! The calculated loops_per_jiffy is not similar to the default one. ====================

[42949373.300000] Mount-cache hash table entries: 512

[42949373.300000] Checking for 'wait' instruction...  available.

[42949373.310000] ========== board id: 312 ==========

[42949373.320000] [INFO] neptune mode...

[42949373.320000] boot_param value: a0002800 

[42949373.330000] mode: 0 

[42949373.330000] size: 480 

[42949373.330000] color1: 0x808010 

[42949373.330000] color2: 0x644000 

[42949373.340000] color3: 0x6100 

[42949373.340000] color4: 0x0 

[42949373.350000] NET: Registered protocol family 16

[42949373.350000] SCSI subsystem initialized

[42949373.360000] usbcore: registered new driver usbfs

[42949373.360000] usbcore: registered new driver hub

[42949373.370000] 

[42949373.370000] 

[42949373.370000] 

[42949373.370000] 

[42949373.370000]  *****************    se init module  *********************

[42949373.370000] 

[42949373.370000] 

[42949373.370000] 

[42949373.380000] se init module major number = 254

[42949373.390000] instcnt=0, u64cnt=0, u64IssuedInstCnt=0

[42949373.390000] size of RPC_POLL_Dev 52 and RPC_INTR_Dev 52...

[42949373.400000] [MCP] Info, mcp device detected ...

[42949373.410000]    Hello, Realtek TLB Mapper

-------------------
Audio Version = 615779 (jupiter)
Common Version = 623396
Binary src compiled at Feb  6 2014 12:07:28
Note = 
-------------------
[42949373.420000]    AllocBP size: 589824 order: 8 

[42949373.430000] 	<<<DVR FREE AREA>>>

[42949373.430000] 	0:	0

[42949373.440000] 	1:	0

[42949373.440000] 	2:	0

[42949373.440000] 	3:	0

[42949373.440000] 	4:	0

[42949373.450000] 	5:	0

[42949373.450000] 	6:	0

[42949373.450000] 	7:	0

[42949373.450000] 	8:	1

[42949373.460000] 		Addr: 81a00000, order: 8 

[42949373.460000] 	9:	1

[42949373.460000] 		Addr: 81800000, order: 9 

[42949373.470000] 	10:	0

[42949373.470000] 	11:	1

[42949373.470000] 		Addr: 81000000, order: 11 

[42949373.480000] 	12:	11

[42949373.480000] 		Addr: 8c000000, order: 12 

[42949373.490000] 		Addr: 8b000000, order: 12 

[42949373.490000] 		Addr: 8a000000, order: 12 

[42949373.500000] 		Addr: 89000000, order: 12 

[42949373.500000] 		Addr: 88000000, order: 12 

[42949373.500000] 		Addr: 87000000, order: 12 

[42949373.510000] 		Addr: 86000000, order: 12 

[42949373.510000] 		Addr: 85000000, order: 12 

[42949373.520000] 		Addr: 84000000, order: 12 

[42949373.520000] 		Addr: 83000000, order: 12 

[42949373.530000] 		Addr: 82000000, order: 12 

[42949373.530000] <mtp module> insert mtpfs module OK

[42949373.540000] squashfs: version 3.1 (2006/08/19) Phillip Lougher

[42949373.550000] devfs: 2004-01-31 Richard Gooch ([email protected])

[42949373.550000] devfs: boot_options: 0x1

[42949373.560000] JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.

[42949373.570000] YAFFS Driver Rev:291473 (2010-01-14)

[42949373.570000] YAFFS Driver is successfully installing.

[42949373.580000] Initializing Cryptographic API

[42949373.590000] Generic RTC Driver v1.07

[42949373.590000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[42949373.600000] ttyS0 at MMIO 0x0 (irq = 3) is a 16550A

[42949373.610000] ttyS1 at MMIO 0x0 (irq = 3) is a 16550A

[42949373.610000] io scheduler noop registered

[42949373.620000] RAMDISK driver initialized: 1 RAM disks of 128K size 1024 blocksize

[42949373.630000] loop: loaded (max 8 devices)

[42949373.630000] PPP generic driver version 2.4.2

[42949373.640000] PPP Deflate Compression module registered

[42949373.640000] PPP BSD Compression module registered

[42949373.650000] NET: Registered protocol family 24

[42949373.650000] VenusSFC MTD init...

[42949373.660000] NOR flash support list ..

[42949373.660000] (V) MD_WRITE support.

[42949373.670000] (X) MD_READ support.

[42949373.670000] (V) HWSEMA support.

[42949373.670000] (X) AUTO_HW_POLL support.

[42949373.680000] (X) 4Bytes mode support.

[42949373.680000] (X) Sfc_delay support.

[42949373.690000] serial flash inaccessible

[42949373.690000] physmap flash device: 8000000 at 17d00000

[42949373.700000] New patch -- change oob layout [rtk_nand_init]

[42949373.700000] Realtek NAND Flash Driver Rev:402787 (2012-02-07)

[42949373.710000] [rtk_nand_init]Bootcode size 0xc00000

[42949373.720000] [rtk_nand_init]Factory parameter size 0x400000

[42949373.720000] (X)NAND_POWEROFF_CARDREADER_WITH_MULTI_READ

[42949373.730000] (X)NAND_READ_SKIP_UPDATE_BBT

[42949373.730000] [rtk_nand_read_id] Read ID result as follow 

[42949373.740000] ID0[0x98] 

[42949373.740000] ID1[0xd1] 

[42949373.750000] ID2[0x90] 

[42949373.750000] ID3[0x15] 

[42949373.750000] ID4[0x76] 

[42949373.760000] ID5[0x14] 

[42949373.760000] [rtk_nand_read_id] Read ID result as follow 

[42949373.760000] ID0[0x0] 

[42949373.770000] ID1[0x0] 

[42949373.770000] ID2[0x0] 

[42949373.770000] ID3[0x0] 

[42949373.780000] ID4[0x0] 

[42949373.780000] ID5[0x0] 

[42949373.780000] One TC58NVG0S3E chip has 1 die(s) on board

[42949373.790000] nand part=TC58NVG0S3E, id=98d19015, device_size=134217728, chip_size=134217728, num_chips=1, isLastPage=0

[42949373.800000] [rtk_nand_scan_bbt] have created bbt B0, just loads it !!

[42949373.810000] [dump_BBT] Nand BBT Content

[42949373.810000] Congratulation!! No BBs in this Nand.

[42949373.820000] 4 cmdlinepart partitions found on MTD device rtk_nand

[42949373.830000] RTK: using dynamic nand partition

[42949373.830000] Creating 4 MTD partitions on "rtk_nand":

[42949373.840000] 0x00000000-0x04fe0000 : "Partition_000"

[42949373.840000] 0x04fe0000-0x06560000 : "/"

[42949373.850000] 0x06560000-0x07960000 : "/usr/local/etc"

[42949373.850000] 0x07960000-0x08000000 : "Partition_003"

[42949373.860000] 0x00000000-0x08000000 : "disc"

[42949373.860000] Realtek Nand Flash Driver is successfully installing.

[42949373.870000] Initializing USB Mass Storage driver...

[42949373.880000] usbcore: registered new driver usb-storage

[42949373.880000] USB Mass Storage support registered.

[42949373.890000] Initializing USB MTP/PTP driver...

[42949373.900000] usbcore: registered new driver usb-mtp

[42949373.900000] USB MTP/PTP support registered.

[42949373.910000] mice: PS/2 mouse device common for all mice

[42949373.910000] i2c /dev entries driver

[42949373.920000] [I2C0] i2c speed changed to 100 KHz

[42949373.920000] I2C0 Bus Status Check.... OK

[42949373.930000] =========================

[42949373.930000] = VER : 2.1b               

[42949373.940000] =========================

[42949373.940000] = PHY : 0               

[42949373.940000] = MODEL: Jupiter              

[42949373.950000] = SPD : 100               

[42949373.950000] = SAR : 0x024 (7 bits) 

[42949373.960000] = TX FIFO DEPTH : 32     

[42949373.960000] = RX FIFO DEPTH : 32     

[42949373.970000] = FIFO THRESHOLD: 4     

[42949373.970000] = BUS JAM RECORVER 3: ON  

[42949373.980000] = NON STOP WRITE : ON  

[42949373.980000] = GPIO RW SUPPORT : ON 

[42949373.980000] =========================

[42949373.990000] [I2C1] i2c speed changed to 100 KHz

[42949374.600000] I2C 1 Jamed, BUS Status: SDA=0, SCL=0

[42949374.600000] I2C1 Bus Status Check.... Error... Try to Recrver

[42949374.610000] Do I2C1 Bus Recover 0

[42949374.820000] I2C1 Bus Recover successed

[42949374.820000] =========================

[42949374.820000] = VER : 2.1b               

[42949374.830000] =========================

[42949374.830000] = PHY : 1               

[42949374.840000] = MODEL: Jupiter              

[42949374.840000] = SPD : 100               

[42949374.850000] = SAR : 0x024 (7 bits) 

[42949374.850000] = TX FIFO DEPTH : 32     

[42949374.860000] = RX FIFO DEPTH : 32     

[42949374.860000] = FIFO THRESHOLD: 4     

[42949374.860000] = BUS JAM RECORVER 3: ON  

[42949374.870000] = NON STOP WRITE : ON  

[42949374.870000] = GPIO RW SUPPORT : ON 

[42949374.880000] =========================

[42949374.880000] cec_core_init, register cec_bus 8056f770

[42949374.890000] mars cec module init

[42949374.890000] register cec driver 'mars_cec' (8056f9cc)

[42949374.900000] register cec device 'mars_cec' (8056f908) to cec0

[42949374.900000] probe : cec_dev 'mars_cec' (8056f908), cec_drv 'mars_cec' (8056f9cc)

[42949374.910000] Open Jupiter CEC

[42949374.920000] [GCEC] Info, cycle_per_us : 250

[42949374.920000] usbcore: registered new driver usbhid

[42949374.930000] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

[42949374.940000] Advanced Linux Sound Architecture Driver Version 1.0.9rc2  (Thu Mar 24 10:33:39 2005 UTC).

[42949374.950000] snd_mars_volume_info

[42949374.950000] snd_mars_volume_info

[42949374.960000] ALSA device list:

[42949374.960000]   #0: Mars 1

[42949374.960000] NET: Registered protocol family 2

[42949375.060000] IP: routing cache hash table of 2048 buckets, 16Kbytes

[42949375.060000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[42949375.070000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)

[42949375.080000] TCP: Hash tables configured (established 16384 bind 16384)

[42949375.090000] ip_conntrack version 2.1 (2048 buckets, 16384 max) - 212 bytes per conntrack

[42949375.340000] ip_tables: (C) 2000-2002 Netfilter core team

[42949375.520000] NET: Registered protocol family 1

[42949375.520000] NET: Registered protocol family 10

[42949375.530000] IPv6 over IPv4 tunneling driver

[42949375.530000] NET: Registered protocol family 17

[42949375.590000] RTK rtc cannot work.

[42949375.960000] Bridge firewalling registered

[42949375.960000] Realtek Venus Power Management, (c) 2006 Realtek Semiconductor Corp.

[42949376.480000] IP-Config: No network devices available.

[42949376.480000] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,1)

[42949376.490000]  WARNING[1]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1953016]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1951958]:POV: Wait system to STOP Power on Video!(bVideoDone 2)
WARNING[1952246]:POV: Wait system to STOP Power on Video!(bVideoDone 2)