Stark Groove 7W-L UART boot log

dump_uart.txt

▒UյU▒U▒▒U▒Օ▒UյU▒U▒▒U▒յU▒U▒▒U▒UյU▒U▒▒U▒U▒▒Uյ▒Օ▒Uյ▒▒U▒HELLO! BOOT0 is starting!
boot0 version : 4.2.0
boot0 commit : 0b1334302d2064065c32a7e88e423c38766750e3

fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x0000000f
rtc[2] value = 0x00000000
rtc[3] value = 0xf1f15000
DRAM DRIVE INFO: V1.6
DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM zq value: 00007bbbDRAM CLK =456 MHZ
USE PLL DDR1
USE PLL NORMAL
PLL FREQUENCE = 912 MHZ
DRAM master priority setting ok.
Auto calculate timing parameter!
para_dram_tpr0 = 0046210d
para_dram_tpr1 = 01c22109
para_dram_tpr2 = 00050037
tcl = 6,tcwl = 4
DRAM TIMING PARA0 = 0a0c1809
DRAM TIMING PARA1 = 0003040d
DRAM TIMING PARA2 = 0406050a
DRAM TIMING PARA3 = 0000400c
DRAM TIMING PARA4 = 04020404
DRAM TIMING PARA5 = 05050403
DRAM TIMING PARA8 = 90003310
DRAM PHY INTERFACE PARA = 02040102
DRAM VTC is disable
DRAM dynamic DQS/DQ ODT is on
DRAM DQS gate is PD mode.
DRAM one rank training is on,the value is 91003587
DRAM work mode register value = 004319e4
DRAM SIZE =1024 M
set one rank ODTMAP
DRAM simple test OK.
dram size =1024
NAND_ClkRequest, nand_index: 0x00001000
Reg 0x01c20080: 0x00053de3
Reg 0x01c20060: 0x00053dd6
Reg 0x01c202c0: 0x00053dd6
NAND_SetClk, nand_index: 0x0000000a
Reg 0x01c20080: 0x00053de7
_vender_get_param_otp_hynix time 0!
rr cnt: 8
rr reg cnt: 4
NB0 : nand phy init ok
block from 4 to 13
sum=d4e7f69d
src_sum=d4e7f69d
Ready to disable icache.
Jump to secend Boot.
[      0.420]

U-Boot 2011.09-rc1-00007-g4e7f0ba-dirty (Mar 23 2017 - 08:51:37) Allwinner Technology

[      0.429]version: 1.1.0
[      0.533]pmbus:   normal or secure os
ready
[      0.537]PMU: AXP221
[      0.539]PMU: AXP22x found
bat_vol=3813, ratio=40
[      0.545]PMU: dcdc3 1200
[      0.548]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz
set power on vol to default
dcdc1_vol = 3000
dcdc2_vol = 1100
dcdc3_vol = 1200
dcdc4_vol = 0
dcdc5_vol = 1500
aldo2_vol = 2500
aldo3_vol = 3000
find power_sply to end
vbus exist
vbus pc exist, limit to pc
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[      0.750]DRAM:  1 GiB
relocation Offset is: 35ac3000
smcl's set manager is NULL
OSAL_Power_Enable:<axp22, dc1sw>
workmode = 0
[      0.811]NAND: NAND_UbootInit
NAND_UbootInit start
NB1 : enter NAND_LogicInit
nand : get id number_ctl from script:0x2
uboot: nand version: 3 5004 20170307 1726
nand : get CapacityLevel fail, 7fb54ec0
not burn nand partition table!
NB1 : nftl num: 1
 init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
NAND_UbootInit end: 0x0
[      3.584]sunxi flash init ok
sunxi secure storage is not supported
[      3.593]usb burn from boot
delay time 0
[      3.664]usb prepare ok
usb sof ok
[      3.845]usb probe ok
[      3.848]usb setup ok
set address 0x3
[      6.850]timer occur
[      6.885]do_burn_from_boot usb : have no handshake
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:14-
-name-        -start-       -size-
bootloader  : 1000000       2000000
env         : 3000000       1000000
boot        : 4000000       1000000
system      : 5000000       80000000
misc        : 85000000      1000000
recovery    : 86000000      2000000
cache       : 88000000      30000000
metadata    : b8000000      1000000
private     : b9000000      1000000
frp         : ba000000      80000
empty       : ba080000      f80000
alog        : bb000000      5000000
media_data  : c0000000      1000000
UDISK       : c1000000      0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 100, low 2
cant find fstbt value
misc partition found
to be run cmd=run setargs_nand boot_normal

** Unable to read "ULI/factory/snum.txt" from sunxi_flash 8:0 **
load file(ULI/factory/snum.txt) error
serial is: 87201cd7191700000000
mount part name bootloader
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
board_status_probe
[      7.013]pre sys mode
sunxi_bmp_logo_display
screen_id =0, screen_width =1024, screen_height =600
[      7.110]Hit any key to stop autoboot:  0
read boot or recovery all
[      7.712]sunxi flash read :offset 4000000, 15708295 bytes OK
no signature
[      7.726]ready to boot
para err in disp_ioctl, cmd = 0xa,screen id = 1
[      7.732][mmc]: MMC Device 2 not found
[      7.736][mmc]:  mmc  not find,so not exit
NAND_UbootExit
NB1 : NAND_LogicExit
[      7.740]
Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.39 (inet-soft32@superFAE03) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Wed Apr 5 09:33:57 CST 2017
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun8i
[    0.000000] Initialized persistent memory from 43080800-430907ff
[    0.000000] cma: CMA: reserved 256 MiB at 70000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c09b2f00, node_mem_map c143c000
[    0.000000]   Normal zone: 1710 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 192850 pages, LIFO batch:31
[    0.000000]   HighMem zone: 594 pages used for memmap
[    0.000000]   HighMem zone: 66990 pages, LIFO batch:15
[    0.000000] script_init enter!
[    0.000000] script_init exit!
[    0.000000] PERCPU: Embedded 8 pages/cpu @c1d55000 s10688 r8192 d13888 u32768
[    0.000000] pcpu-alloc: s10688 r8192 d13888 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259840
[    0.000000] Kernel command line: boot_type=0 disp_para=100 fb_base=0x0 config_size=42980 androidboot.serialno=87201cd7191700000000 androidboot.hardware=sun8i console=ttyS0,115200 root=/dev/nandd init=/init ion_cma_list=120m,256m loglevel=8 partitions=bootloader@nanda:env@nandb:boot@nandc:system@nandd:misc@nande:recovery@nandf:cache@nandg:metadata@nandh:private@nandi:frp@nandj:empty@nandk:alog@nandl:media_data@nandm:UDISK@nandn
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 760168k/760168k available, 288408k reserved, 8192K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08f3adc   (9135 kB)
[    0.000000]       .init : 0xc08f4000 - 0xc09469c0   ( 331 kB)
[    0.000000]       .data : 0xc0948000 - 0xc09c6a60   ( 507 kB)
[    0.000000]        .bss : 0xc09c78f0 - 0xc0b4f048   (1566 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:416
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.000270] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[    0.000297] pid_max: default: 32768 minimum: 301
[    0.000520] Security Framework initialized
[    0.000576] SELinux:  Initializing.
[    0.000687] SELinux:  Starting in permissive mode
[    0.000792] Mount-cache hash table entries: 512
[    0.001971] Initializing cgroup subsys debug
[    0.001989] Initializing cgroup subsys cpuacct
[    0.002002] Initializing cgroup subsys freezer
[    0.002052] CPU: Testing write buffer coherency: ok
[    0.002115] ftrace: allocating 23615 entries in 70 pages
[    0.030338] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.030360] [sunxi_smp_prepare_cpus] enter
[    0.030412] Setting up static identity map for 0x4063eb28 - 0x4063eb80
[    0.010000] CPU1: Booted secondary processor
[    0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.010000] CPU2: Booted secondary processor
[    0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.010000] CPU3: Booted secondary processor
[    0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.210185] Brought up 4 CPUs
[    0.210185] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[    0.210456] devtmpfs: initialized
[    0.220142] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.220416] pinctrl core: initialized pinctrl subsystem
[    0.231674] NET: Registered protocol family 16
[    0.252944] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.253028] script_sysfs_init success
[    0.253062] sunxi_dump_init success
[    0.254200] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[    0.255741] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[    0.256153] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
[    0.257522] persistent_ram: uncorrectable error in header
[    0.257537] persistent_ram: no valid data in buffer (sig = 0xffffffff)
[    0.267507] console [ram-1] enabled
[    0.268411] [sunxi-module]: [sunxi-module.0] probe success
[    0.268633] script config pll3 to 297 Mhz
[    0.268740] script config pll4 to 300 Mhz
[    0.268949] script config pll6 to 600 Mhz
[    0.269053] script config pll8 to 408 Mhz
[    0.269166] script config pll9 to 480 Mhz
[    0.269352] script config pll10 to 297 Mhz
[    0.269452] sunxi_default_clk_init
[    0.269552] try to set pll6ahb1 to 200000000
[    0.269775] try to set ahb clk source to pll6ahb1
[    0.269877] set ahb clk source to pll6ahb1
[    0.269979] try to set ahb1 to 200000000
[    0.270020] try to set apb1 to 100000000
[    0.280319] bio: create slab <bio-0> at 0
[    0.280732] [ARISC] :sunxi-arisc driver v1.60
[    0.289791] [ARISC] :arisc version: [v0.1.11]
[    0.289916] [sunxi-module]: arisc register success
[    0.296521] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
[    0.300571] SCSI subsystem initialized
[    0.300979] usbcore: registered new interface driver usbfs
[    0.301161] usbcore: registered new interface driver hub
[    0.301369] usbcore: registered new device driver usb
[    0.301369] twi_chan_cfg()335 - [twi0] has no twi_regulator.
[    0.301369] twi_chan_cfg()335 - [twi1] has no twi_regulator.
[    0.301369] twi_chan_cfg()335 - [twi2] has no twi_regulator.
[    0.301591] Linux video capture interface: v2.00
[    0.310442] current_limit = 450000
[    0.320263] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.321086] Bluetooth: Core ver 2.16
[    0.321253] NET: Registered protocol family 31
[    0.321358] Bluetooth: HCI device and connection manager initialized
[    0.321547] Bluetooth: HCI socket layer initialized
[    0.321648] Bluetooth: L2CAP socket layer initialized
[    0.321851] Bluetooth: SCO socket layer initialized
[    0.322250] cfg80211: Calling CRDA to update world regulatory domain
[    0.322219] Switching to clocksource arch_sys_counter
[    0.343556] FS-Cache: Loaded
[    0.344120] CacheFiles: Loaded
[    0.356556] [ddrfreq] warning: disabled!
[    0.357591] NET: Registered protocol family 2
[    0.358096] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.358968] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.361120] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.362141] TCP: Hash tables configured (established 131072 bind 65536)
[    0.362327] TCP: reno registered
[    0.362433] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.362644] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.363151] NET: Registered protocol family 1
[    0.363820] RPC: Registered named UNIX socket transport module.
[    0.363927] RPC: Registered udp transport module.
[    0.364111] RPC: Registered tcp transport module.
[    0.364211] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.364660] Unpacking initramfs...
[    0.672275] Freeing initrd memory: 4332K
[    0.673757] [pm]aw_pm_init!
[    0.673947] standby_mode = 1.
[    0.674049] wakeup src cnt is : 2.
[    0.674151] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[    0.674336] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
[    0.674439] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[    0.674542] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[    0.674726] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x280
[    0.674908] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[    0.675051] sunxi_reg_init enter
[    0.676303] audit: initializing netlink socket (disabled)
[    0.676466] type=2000 audit(0.670:1): initialized
[    0.680368] highmem bounce pool size: 64 pages
[    0.682874] NTFS driver 2.1.30 [Flags: R/W].
[    0.683192] fuse init (API version 7.18)
[    0.683920] msgmni has been set to 1477
[    0.684064] SELinux:  Registering netfilter hooks
[    0.686484] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.686680] io scheduler noop registered
[    0.686782] io scheduler deadline registered
[    0.687055] io scheduler cfq registered (default)
[    0.687692] pwm module init!
[    0.688410] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[    0.688602] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
[    0.689186] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.689376] sw_uart_pm()890 - uart0 clk is already enable
[    0.689488] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[    0.785514] console [ttyS0] enabled
[    0.884447] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[    0.987863] loop: module loaded
[    1.085967] [rf_pm]: select module num is 5
[    1.183776] [rf_pm]: module power1 name axp22_dldo1
[    1.281406] [rf_pm]: module power1 vol 3300000
[    1.476880] [rf_pm]: module power2 name axp22_dldo2
[    1.672477] [rf_pm]: module power2 vol 3300000
[    1.731213] [rf_pm]: module power3 name
[    1.735737] [rf_pm]: failed to fetch module_power3_vol
[    1.741585] [rf_pm]: set gpio GPIO0 mulsel failed.
[    1.747070] [rf_pm]: mod has no chip_en gpio
[    1.751916] [rf_pm]: lpo_use_apclk:
[    1.756116] [rf_pm]: get power regulator  failed.
[    1.761533] [rf_pm]: set axp22_dldo1 to 3300000 v
[    1.766995] [rf_pm]: enable axp22_dldo1.
[    1.772032] [rf_pm]: set axp22_dldo2 to 3300000 v
[    1.777531] [rf_pm]: enable axp22_dldo2.
[    1.782546] [rf_pm]: mod info power switch 1024
[    1.787917] scene_lock_init name=rf_pm
[    1.792479] [wifi_pm]: wifi gpio init is OK !!
[    1.797570] [rfkill]: mod has no ls_int gpio
[    1.802508] [rfkill]: mod has no pcm_ch gpio
[    1.807636] [rfkill]: rfkill set power 0
[    1.830296] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
[    1.837557] tun: Universal TUN/TAP device driver, 1.6
[    1.843282] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[    1.850586] PPP generic driver version 2.4.2
[    1.855623] PPP BSD Compression module registered
[    1.861042] PPP Deflate Compression module registered
[    1.867758] PPP MPPE Compression module registered
[    1.873291] NET: Registered protocol family 24
[    1.878354] PPTP driver version 0.8.5
[    1.882797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.910362] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.919449] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[    1.929199] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[    1.950046] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[    1.957515] hub 1-0:1.0: USB hub found
[    1.961905] hub 1-0:1.0: 1 port detected
[    1.966772] sunxi-ehci sunxi-ehci.1: remove, state 1
[    1.972406] usb usb1: USB disconnect, device number 1
[    1.979043] sunxi-ehci sunxi-ehci.1: USB bus 1 deregistered
[    1.995456] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.002588] Initializing USB Mass Storage driver...
[    2.008172] usbcore: registered new interface driver usb-storage
[    2.015025] USB Mass Storage support registered.
[    2.020309] usbcore: registered new interface driver ums-alauda
[    2.027087] usbcore: registered new interface driver ums-cypress
[    2.033895] usbcore: registered new interface driver ums-datafab
[    2.040784] usbcore: registered new interface driver ums_eneub6250
[    2.047766] usbcore: registered new interface driver ums-freecom
[    2.054647] usbcore: registered new interface driver ums-isd200
[    2.061358] usbcore: registered new interface driver ums-jumpshot
[    2.068327] usbcore: registered new interface driver ums-karma
[    2.075022] usbcore: registered new interface driver ums-onetouch
[    2.081945] usbcore: registered new interface driver ums-realtek
[    2.088817] usbcore: registered new interface driver ums-sddr09
[    2.095534] usbcore: registered new interface driver ums-sddr55
[    2.102331] usbcore: registered new interface driver ums-usbat
[    2.109014] usbcore: registered new interface driver usbserial
[    2.115684] usbserial: USB Serial Driver core
[    2.120680] usbcore: registered new interface driver option
[    2.127071] USB Serial support registered for GSM modem (1-port)
[    2.134176] file system registered
[    2.139879] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.147720] android_usb gadget: Number of LUNs=2
[    2.152953]  lun0: LUN: removable file: (no medium)
[    2.158541]  lun1: LUN: removable file: (no medium)
[    2.164432] get usb_serial_number success from boot command line
[    2.171119] android_usb gadget: android_usb ready
[    2.177150] WRN:L486(drivers/usb/sunxi_usb/hcd/hcd0/sunxi_hcd0.c):get no_suspend status failed
[    2.187307] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
[    2.194380] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 1
[    2.204385] hub 1-0:1.0: USB hub found
[    2.208735] hub 1-0:1.0: 1 port detected
[    2.214186] mousedev: PS/2 mouse device common for all mice
[    2.221407] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[    2.229076] sunxi cedar version 0.1
[    2.233212] [cedar]: install start!!!
[    2.237677] [cedar]: install end!!!
[    2.244772] axp22_dcdc1: Failed to create debugfs directory
[    2.252803] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
[    2.262441] Bluetooth: HCI UART driver ver 2.2
[    2.267548] Bluetooth: HCI H4 protocol initialized
[    2.272972] Bluetooth: HCI Realtek H5 protocol initialized
[    2.279591] axp22_dcdc3: Failed to create debugfs directory
[    2.288411] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.109 2014-12-4 20:51) Compiled in Apr  5 2017 at 09:32:32
[    2.299985] [mmc]: get mmc0's sdc_power failed
[    2.305020] [mmc]: get mmc1's sdc_power failed
[    2.310119] [mmc]: MMC host used card: 0x3, boot card: 0x0, io_card 2