marlin makefile

### DISCLAIMER
### This is a config Makefile tailored to be used with the Type A Machines Series 1 2014 
### For detailed explanations about all the available options in the arduino.mk makefile,
### please refer to https://github.com/sudar/Arduino-Makefile/blob/master/arduino-mk-vars.md


### PROJECT_DIR
### This is the path to where you have created/cloned your project
PROJECT_DIR       =/home/ubuntu/marlin/Marlin

### ARDMK_DIR
### Path to the Arduino-Makefile directory.
ARDMK_DIR         = /home/ubuntu/Arduino-Makefile

### ARDUINO_DIR
### Path to the Arduino application and ressources directory.
ARDUINO_DIR       = /usr/share/arduino

ARDUINO_LIBS      = 

### USER_LIB_PATH
### Path to where the your project's libraries are stored.
USER_LIB_PATH     :=  $(PROJECT_DIR)/lib

### BOARD_TAG
### It must be set to the board you are currently using. (i.e uno, mega2560, etc.)
BOARD_TAG         = mega2560

### MONITOR_BAUDRATE
### It must be set to Serial baudrate value you are using.
MONITOR_BAUDRATE  = 230400

### AVR_TOOLS_DIR
### Path to the AVR tools directory such as avr-gcc, avr-g++, etc.
AVR_TOOLS_DIR     = /usr

### AVRDDUDE
### Path to avrdude directory.
AVRDDUDE          = /usr/bin/avrdude

### CPPFLAGS
### Flags you might want to set for debugging purpose. Comment to stop.
CPPFLAGS         = -pedantic -Wall -Wextra

### MONITOR_PORT
### The port your board is connected to. Using an '*' tries all the ports and finds the right one.
MONITOR_PORT      = /dev/ttyACM*

### don't touch this
CURRENT_DIR       = $(shell basename $(CURDIR))

### OBJDIR
### This is were you put the binaries you just compile using 'make'
OBJDIR            = $(PROJECT_DIR)/bin/$(BOARD_TAG)/$(CURRENT_DIR)

### path to Arduino.mk, inside the ARDMK_DIR, don't touch.
include $(ARDMK_DIR)/Arduino.mk