Skip to content

Instantly share code, notes, and snippets.

@minlexx

minlexx/line_noise_convert_utf.h

Forked from DBJDBJ/line_noise_convert_utf.h
Created July 16, 2020 15:31
Show Gist options
  • Save minlexx/2065c0007a72a6490c84d0d2a2b71a00 to your computer and use it in GitHub Desktop.
Save minlexx/2065c0007a72a6490c84d0d2a2b71a00 to your computer and use it in GitHub Desktop.
Download ZIP
unicode conversions
Raw
line_noise_convert_utf.h
#pragma once
#ifndef LINENOISE_CONVERT_INC
#define LINENOISE_CONVERT_INC
/*
Copyright 2020 [email protected] -- turned into single header C lib
inevitably some name clashes will
start becuase of this header.
Thus renaming is very likely not finished
Licence: CC BY SA 4.0
*/
/* Origial Copyright 2001-2004 Unicode, Inc.
*
* Disclaimer
*
* This source code is provided as is by Unicode, Inc. No claims are
* made as to fitness for any particular purpose. No warranties of any
* kind are expressed or implied. The recipient agrees to determine
* applicability of information provided. If this file has been
* purchased on magnetic or optical media from Unicode, Inc., the
* sole remedy for any claim will be exchange of defective media
* within 90 days of receipt.
*
* Limitations on Rights to Redistribute This Code
*
* Unicode, Inc. hereby grants the right to freely use the information
* supplied in this file in the creation of products supporting the
* Unicode Standard, and to make copies of this file in any form
* for internal or external distribution as long as this notice
* remains attached.
Conversions between UTF32, UTF-16, and UTF-8. Source code file.
Author: Mark E. Davis, 1994.
Rev History: Rick McGowan, fixes & updates May 2001.
Sept 2001: fixed const & error conditions per
mods suggested by S. Parent & A. Lillich.
June 2002: Tim Dodd added detection and handling of incomplete
source sequences, enhanced error detection, added casts
to eliminate compiler warnings.
July 2003: slight mods to back out aggressive FFFE detection.
Jan 2004: updated switches in from-UTF8 conversions.
Oct 2004: updated to use LINENOISE_UNI_MAX_LEGAL_UTF32 in UTF-32 conversions.
Conversions between UTF32, UTF-16, and UTF-8. Header file.
Several funtions are included here, forming a complete set of
conversions between the three formats. UTF-7 is not included
here, but is handled in a separate source file.
Each of these routines takes pointers to input buffers and output
buffers. The input buffers are const.
Each routine converts the text between *sourceStart and sourceEnd,
putting the result into the buffer between *targetStart and
targetEnd. Note: the end pointers are *after* the last item: e.g.
*(sourceEnd - 1) is the last item.
The return result indicates whether the conversion was successful,
and if not, whether the problem was in the source or target buffers.
(Only the first encountered problem is indicated.)
After the conversion, *sourceStart and *targetStart are both
updated to point to the end of last text successfully converted in
the respective buffers.
Input parameters:
sourceStart - pointer to a pointer to the source buffer.
The contents of this are modified on return so that
it points at the next thing to be converted.
targetStart - similarly, pointer to pointer to the target buffer.
sourceEnd, targetEnd - respectively pointers to the ends of the
two buffers, for overflow checking only.
These conversion functions take a conversion_flags argument. When this
flag is set to strict, both irregular sequences and isolated surrogates
will cause an error. When the flag is set to lenient, both irregular
sequences and isolated surrogates are converted.
Whether the flag is strict or lenient, all illegal sequences will cause
an error return. This includes sequences such as: <F4 90 80 80>, <C0 80>,
or <A0> in UTF-8, and values above 0x10FFFF in UTF-32. Conformant code
must check for illegal sequences.
When the flag is set to lenient, characters over 0x10FFFF are converted
to the replacement character; otherwise (when the flag is set to strict)
they constitute an error.
Output parameters:
The value "sourceIllegal" is returned from some routines if the input
sequence is malformed. When "sourceIllegal" is returned, the source
value will point to the illegal value that caused the problem. E.g.,
in UTF-8 when a sequence is malformed, it points to the start of the
malformed sequence.
Author: Mark E. Davis, 1994.
Rev History: Rick McGowan, fixes & updates May 2001.
Fixes & updates, Sept 2001.
------------------------------------------------------------------------ */
#include <stdint.h>
#include <stdbool.h>
#ifdef __cplusplus
namespace linenoise_ng {
extern "C" {
#endif // __cplusplus
#if !defined __cplusplus || (defined _MSC_VER && _MSC_VER < 1900)
typedef unsigned short char16_t;
typedef unsigned int char32_t;
#endif
typedef uint32_t UTF32;
typedef uint16_t UTF16;
typedef uint8_t UTF8;
/* Some fundamental constants */
enum : UTF32 {
LINENOISE_UNI_REPLACEMENT_CHAR = (UTF32)0x0000FFFD,
LINENOISE_UNI_MAX_BMP = (UTF32)0x0000FFFF,
LINENOISE_UNI_MAX_UTF16 = (UTF32)0x0010FFFF,
LINENOISE_UNI_MAX_UTF32 = (UTF32)0x7FFFFFFF,
LINENOISE_UNI_MAX_LEGAL_UTF32 = (UTF32)0x0010FFFF
};
enum { linenoise_halfshift = 10 }; /* used for shifting by 10 bits */
enum : UTF32 {
linenoise_halfbase = (UTF32)0x0010000UL,
linenoise_halfmask = (UTF32)0x3FFUL
};
/* ---------------------------------------------------------------------
The following 4 definitions are compiler-specific.
The C standard does not guarantee that wchar_t has at least
16 bits, so wchar_t is no less portable than unsigned short!
All should be unsigned values to avoid sign extension during
bit mask & shift operations.
------------------------------------------------------------------------ */
enum : UTF32 {
LINENOISE_UNI_SUR_HIGH_START = (UTF32)0xD800,
LINENOISE_UNI_SUR_HIGH_END = (UTF32)0xDBFF,
LINENOISE_UNI_SUR_LOW_START = (UTF32)0xDC00,
LINENOISE_UNI_SUR_LOW_END = (UTF32)0xDFFF
};
/* --------------------------------------------------------------------- */
typedef enum conversion_result {
conversionOK, /* conversion successful */
sourceExhausted, /* partial character in source, but hit end */
targetExhausted, /* insuff. room in target for conversion */
sourceIllegal /* source sequence is illegal/malformed */
} conversion_result;
typedef enum conversion_flags {
strictConversion = 0,
lenientConversion
} conversion_flags;
/* --------------------------------------------------------------------- */
/*
* Index into the table below with the first byte of a UTF-8 sequence to
* get the number of trailing bytes that are supposed to follow it.
* Note that *legal* UTF-8 values can't have 4 or 5-bytes. The table is
* left as-is for anyone who may want to do such conversion, which was
* allowed in earlier algorithms.
*/
static const char trailing_bytes_for_utf8[256] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
3, 3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5};
/*
* Magic values subtracted from a buffer value during UTF8 conversion.
* This table contains as many values as there might be trailing bytes
* in a UTF-8 sequence.
*/
static const UTF32 offsets_from_utf8[6] = {0x00000000UL, 0x00003080UL,
0x000E2080UL, 0x03C82080UL,
0xFA082080UL, 0x82082080UL};
/*
* Once the bits are split out into bytes of UTF-8, this is a mask OR-ed
* into the first byte, depending on how many bytes follow. There are
* as many entries in this table as there are UTF-8 sequence types.
* (I.e., one byte sequence, two byte... etc.). Remember that sequencs
* for *legal* UTF-8 will be 4 or fewer bytes total.
*/
static const UTF8 firstByteMark[7] = {0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8, 0xFC};
/*
* Utility routine to tell whether a sequence of bytes is legal UTF-8.
* This must be called with the length pre-determined by the first byte.
* If not calling this from ConvertUTF8to*, then the length can be set by:
* length = trailing_bytes_for_utf8[*source]+1;
* and the sequence is illegal right away if there aren't that many bytes
* available.
* If presented with a length > 4, this returns false. The Unicode
* definition of UTF-8 goes up to 4-byte sequences.
*/
inline
bool
is_legal_utf8(const UTF8* source, int length) {
UTF8 a;
const UTF8* srcptr = source + length;
switch (length) {
default:
return false;
/* Everything else falls through when "true"... */
case 4:
if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false;
case 3:
if ((a = (*--srcptr)) < 0x80 || a > 0xBF) return false;
case 2:
if ((a = (*--srcptr)) > 0xBF) return false;
switch (*source) {
/* no fall-through in this inner switch */
case 0xE0:
if (a < 0xA0) return false;
break;
case 0xED:
if (a > 0x9F) return false;
break;
case 0xF0:
if (a < 0x90) return false;
break;
case 0xF4:
if (a > 0x8F) return false;
break;
default:
if (a < 0x80) return false;
}
case 1:
if (*source >= 0x80 && *source < 0xC2) return false;
}
if (*source > 0xF4) return false;
return true;
}
/* --------------------------------------------------------------------- */
inline
conversion_result
convert_utf8_to_utf16(const UTF8** sourceStart,
const UTF8* sourceEnd, UTF16** targetStart,
UTF16* targetEnd, conversion_flags flags) {
conversion_result result = conversionOK;
const UTF8* source = *sourceStart;
UTF16* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch = 0;
unsigned short extraBytesToRead = trailing_bytes_for_utf8[*source];
if (source + extraBytesToRead >= sourceEnd) {
result = sourceExhausted;
break;
}
/* Do this check whether lenient or strict */
if (!is_legal_utf8(source, extraBytesToRead + 1)) {
result = sourceIllegal;
break;
}
/*
* The cases all fall through. See "Note A" below.
*/
switch (extraBytesToRead) {
case 5:
ch += *source++;
ch <<= 6; /* remember, illegal UTF-8 */
case 4:
ch += *source++;
ch <<= 6; /* remember, illegal UTF-8 */
case 3:
ch += *source++;
ch <<= 6;
case 2:
ch += *source++;
ch <<= 6;
case 1:
ch += *source++;
ch <<= 6;
case 0:
ch += *source++;
}
ch -= offsets_from_utf8[extraBytesToRead];
if (target >= targetEnd) {
source -= (extraBytesToRead + 1); /* Back up source pointer! */
result = targetExhausted;
break;
}
if (ch <= LINENOISE_UNI_MAX_BMP) { /* Target is a character <= 0xFFFF */
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= LINENOISE_UNI_SUR_HIGH_START && ch <= LINENOISE_UNI_SUR_LOW_END) {
if (flags == strictConversion) {
source -=
(extraBytesToRead + 1); /* return to the illegal value itself */
result = sourceIllegal;
break;
} else {
*target++ = LINENOISE_UNI_REPLACEMENT_CHAR;
}
} else {
*target++ = (UTF16)ch; /* normal case */
}
} else if (ch > LINENOISE_UNI_MAX_UTF16) {
if (flags == strictConversion) {
result = sourceIllegal;
source -= (extraBytesToRead + 1); /* return to the start */
break; /* Bail out; shouldn't continue */
} else {
*target++ = LINENOISE_UNI_REPLACEMENT_CHAR;
}
} else {
/* target is a character in range 0xFFFF - 0x10FFFF. */
if (target + 1 >= targetEnd) {
source -= (extraBytesToRead + 1); /* Back up source pointer! */
result = targetExhausted;
break;
}
ch -= linenoise_halfbase;
*target++ = (UTF16)((ch >> linenoise_halfshift) + LINENOISE_UNI_SUR_HIGH_START);
*target++ = (UTF16)((ch & linenoise_halfmask) + LINENOISE_UNI_SUR_LOW_START);
}
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
inline
conversion_result
convert_utf16_to_utf8(const UTF16** sourceStart,
const UTF16* sourceEnd, UTF8** targetStart,
UTF8* targetEnd, conversion_flags flags) {
conversion_result result = conversionOK;
const UTF16* source = *sourceStart;
UTF8* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch;
unsigned short bytesToWrite = 0;
const UTF32 byteMask = 0xBF;
const UTF32 byteMark = 0x80;
const UTF16* oldSource =
source; /* In case we have to back up because of target overflow. */
ch = *source++;
/* If we have a surrogate pair, convert to UTF32 first. */
if (ch >= LINENOISE_UNI_SUR_HIGH_START && ch <= LINENOISE_UNI_SUR_HIGH_END) {
/* If the 16 bits following the high surrogate are in the source buffer...
*/
if (source < sourceEnd) {
UTF32 ch2 = *source;
/* If it's a low surrogate, convert to UTF32. */
if (ch2 >= LINENOISE_UNI_SUR_LOW_START && ch2 <= LINENOISE_UNI_SUR_LOW_END) {
ch = ((ch - LINENOISE_UNI_SUR_HIGH_START) << linenoise_halfshift) +
(ch2 - LINENOISE_UNI_SUR_LOW_START) + linenoise_halfbase;
++source;
} else if (flags ==
strictConversion) { /* it's an unpaired high surrogate */
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
} else { /* We don't have the 16 bits following the high surrogate. */
--source; /* return to the high surrogate */
result = sourceExhausted;
break;
}
} else if (flags == strictConversion) {
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= LINENOISE_UNI_SUR_LOW_START && ch <= LINENOISE_UNI_SUR_LOW_END) {
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
/* Figure out how many bytes the result will require */
if (ch < (UTF32)0x80) {
bytesToWrite = 1;
} else if (ch < (UTF32)0x800) {
bytesToWrite = 2;
} else if (ch < (UTF32)0x10000) {
bytesToWrite = 3;
} else if (ch < (UTF32)0x110000) {
bytesToWrite = 4;
} else {
bytesToWrite = 3;
ch = LINENOISE_UNI_REPLACEMENT_CHAR;
}
target += bytesToWrite;
if (target > targetEnd) {
source = oldSource; /* Back up source pointer! */
target -= bytesToWrite;
result = targetExhausted;
break;
}
switch (bytesToWrite) { /* note: everything falls through. */
case 4:
*--target = (UTF8)((ch | byteMark) & byteMask);
ch >>= 6;
case 3:
*--target = (UTF8)((ch | byteMark) & byteMask);
ch >>= 6;
case 2:
*--target = (UTF8)((ch | byteMark) & byteMask);
ch >>= 6;
case 1:
*--target = (UTF8)(ch | firstByteMark[bytesToWrite]);
}
target += bytesToWrite;
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
inline
conversion_result
convert_utf8_to_utf32(const UTF8** sourceStart,
const UTF8* sourceEnd, UTF32** targetStart,
UTF32* targetEnd, conversion_flags flags) {
conversion_result result = conversionOK;
const UTF8* source = *sourceStart;
UTF32* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch = 0;
unsigned short extraBytesToRead = trailing_bytes_for_utf8[*source];
if (source + extraBytesToRead >= sourceEnd) {
result = sourceExhausted;
break;
}
/* Do this check whether lenient or strict */
if (!is_legal_utf8(source, extraBytesToRead + 1)) {
result = sourceIllegal;
break;
}
/*
* The cases all fall through. See "Note A" below.
*/
switch (extraBytesToRead) {
case 5:
ch += *source++;
ch <<= 6;
case 4:
ch += *source++;
ch <<= 6;
case 3:
ch += *source++;
ch <<= 6;
case 2:
ch += *source++;
ch <<= 6;
case 1:
ch += *source++;
ch <<= 6;
case 0:
ch += *source++;
}
ch -= offsets_from_utf8[extraBytesToRead];
if (target >= targetEnd) {
source -= (extraBytesToRead + 1); /* Back up the source pointer! */
result = targetExhausted;
break;
}
if (ch <= LINENOISE_UNI_MAX_LEGAL_UTF32) {
/*
* UTF-16 surrogate values are illegal in UTF-32, and anything
* over Plane 17 (> 0x10FFFF) is illegal.
*/
if (ch >= LINENOISE_UNI_SUR_HIGH_START && ch <= LINENOISE_UNI_SUR_LOW_END) {
if (flags == strictConversion) {
source -=
(extraBytesToRead + 1); /* return to the illegal value itself */
result = sourceIllegal;
break;
} else {
*target++ = LINENOISE_UNI_REPLACEMENT_CHAR;
}
} else {
*target++ = ch;
}
} else { /* i.e., ch > LINENOISE_UNI_MAX_LEGAL_UTF32 */
result = sourceIllegal;
*target++ = LINENOISE_UNI_REPLACEMENT_CHAR;
}
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
inline
conversion_result
convert_utf32_to_utf8(const UTF32** sourceStart,
const UTF32* sourceEnd, UTF8** targetStart,
UTF8* targetEnd, conversion_flags flags) {
conversion_result result = conversionOK;
const UTF32* source = *sourceStart;
UTF8* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch;
unsigned short bytesToWrite = 0;
const UTF32 byteMask = 0xBF;
const UTF32 byteMark = 0x80;
ch = *source++;
if (flags == strictConversion) {
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= LINENOISE_UNI_SUR_HIGH_START && ch <= LINENOISE_UNI_SUR_LOW_END) {
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
/*
* Figure out how many bytes the result will require. Turn any
* illegally large UTF32 things (> Plane 17) into replacement chars.
*/
if (ch < (UTF32)0x80) {
bytesToWrite = 1;
} else if (ch < (UTF32)0x800) {
bytesToWrite = 2;
} else if (ch < (UTF32)0x10000) {
bytesToWrite = 3;
} else if (ch <= LINENOISE_UNI_MAX_LEGAL_UTF32) {
bytesToWrite = 4;
} else {
bytesToWrite = 3;
ch = LINENOISE_UNI_REPLACEMENT_CHAR;
result = sourceIllegal;
}
target += bytesToWrite;
if (target > targetEnd) {
--source; /* Back up source pointer! */
target -= bytesToWrite;
result = targetExhausted;
break;
}
switch (bytesToWrite) { /* note: everything falls through. */
case 4:
*--target = (UTF8)((ch | byteMark) & byteMask);
ch >>= 6;
case 3:
*--target = (UTF8)((ch | byteMark) & byteMask);
ch >>= 6;
case 2:
*--target = (UTF8)((ch | byteMark) & byteMask);
ch >>= 6;
case 1:
*--target = (UTF8)(ch | firstByteMark[bytesToWrite]);
}
target += bytesToWrite;
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
inline
conversion_result
convert_utf16_to_utf32(const UTF16** sourceStart,
const UTF16* sourceEnd,
UTF32** targetStart, UTF32* targetEnd,
conversion_flags flags) {
conversion_result result = conversionOK;
const UTF16* source = *sourceStart;
UTF32* target = *targetStart;
UTF32 ch, ch2;
while (source < sourceEnd) {
const UTF16* oldSource =
source; /* In case we have to back up because of target overflow. */
ch = *source++;
/* If we have a surrogate pair, convert to UTF32 first. */
if (ch >= LINENOISE_UNI_SUR_HIGH_START && ch <= LINENOISE_UNI_SUR_HIGH_END) {
/* If the 16 bits following the high surrogate are in the source buffer...
*/
if (source < sourceEnd) {
ch2 = *source;
/* If it's a low surrogate, convert to UTF32. */
if (ch2 >= LINENOISE_UNI_SUR_LOW_START && ch2 <= LINENOISE_UNI_SUR_LOW_END) {
ch = ((ch - LINENOISE_UNI_SUR_HIGH_START) << linenoise_halfshift) +
(ch2 - LINENOISE_UNI_SUR_LOW_START) + linenoise_halfbase;
++source;
} else if (flags ==
strictConversion) { /* it's an unpaired high surrogate */
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
} else { /* We don't have the 16 bits following the high surrogate. */
--source; /* return to the high surrogate */
result = sourceExhausted;
break;
}
} else if (flags == strictConversion) {
/* UTF-16 surrogate values are illegal in UTF-32 */
if (ch >= LINENOISE_UNI_SUR_LOW_START && ch <= LINENOISE_UNI_SUR_LOW_END) {
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
}
}
if (target >= targetEnd) {
source = oldSource; /* Back up source pointer! */
result = targetExhausted;
break;
}
*target++ = ch;
}
*sourceStart = source;
*targetStart = target;
#ifdef CVTUTF_DEBUG
if (result == sourceIllegal) {
fprintf(stderr, "convert_utf16_to_utf32 illegal seq 0x%04x,%04x\n", ch, ch2);
fflush(stderr);
}
#endif
return result;
}
/* --------------------------------------------------------------------- */
inline
conversion_result
convert_utf32_to_utf16(const UTF32** sourceStart,
const UTF32* sourceEnd,
char16_t** targetStart,
char16_t* targetEnd,
conversion_flags flags) {
conversion_result result = conversionOK;
const UTF32* source = *sourceStart;
char16_t* target = *targetStart;
while (source < sourceEnd) {
UTF32 ch;
if (target >= targetEnd) {
result = targetExhausted;
break;
}
ch = *source++;
if (ch <= LINENOISE_UNI_MAX_BMP) { /* Target is a character <= 0xFFFF */
/* UTF-16 surrogate values are illegal in UTF-32; 0xffff or 0xfffe are
* both reserved values */
if (ch >= LINENOISE_UNI_SUR_HIGH_START && ch <= LINENOISE_UNI_SUR_LOW_END) {
if (flags == strictConversion) {
--source; /* return to the illegal value itself */
result = sourceIllegal;
break;
} else {
*target++ = LINENOISE_UNI_REPLACEMENT_CHAR;
}
} else {
*target++ = (UTF16)ch; /* normal case */
}
} else if (ch > LINENOISE_UNI_MAX_LEGAL_UTF32) {
if (flags == strictConversion) {
result = sourceIllegal;
} else {
*target++ = LINENOISE_UNI_REPLACEMENT_CHAR;
}
} else {
/* target is a character in range 0xFFFF - 0x10FFFF. */
if (target + 1 >= targetEnd) {
--source; /* Back up source pointer! */
result = targetExhausted;
break;
}
ch -= linenoise_halfbase;
*target++ = (UTF16)((ch >> linenoise_halfshift) + LINENOISE_UNI_SUR_HIGH_START);
*target++ = (UTF16)((ch & linenoise_halfmask) + LINENOISE_UNI_SUR_LOW_START);
}
}
*sourceStart = source;
*targetStart = target;
return result;
}
/* --------------------------------------------------------------------- */
/*
* Exported function to return whether a UTF-8 sequence is legal or not.
* This is not used here; it's just exported.
*/
inline bool is_legal_utf8_sequence(const UTF8* source, const UTF8* sourceEnd) {
int length = trailing_bytes_for_utf8[*source] + 1;
if (source + length > sourceEnd) {
return false;
}
return is_legal_utf8(source, length);
}
#ifdef __cplusplus
} // "C"
} // namespace linenoise_ng
#endif // __cplusplus
/* --------------------------------------------------------------------- */
/* The interface converts a whole buffer to avoid function-call overhead.
* Constants have been gathered. Loops & conditionals have been removed as
* much as possible for efficiency, in favor of drop-through switches.
* (See "Note A" bellow for equivalent code.)
* If your compiler supports it, the "is_legal_utf8" call can be turned
* into an inline function.
Note A.
The fall-through switches in UTF-8 reading code save a
temp variable, some decrements & conditionals. The switches
are equivalent to the following loop:
{
int tmpBytesToRead = extraBytesToRead+1;
do {
ch += *source++;
--tmpBytesToRead;
if (tmpBytesToRead) ch <<= 6;
} while (tmpBytesToRead > 0);
}
In UTF-8 writing code, the switches on "bytesToWrite" are
similarly unrolled loops.
--------------------------------------------------------------------- */
#endif // !LINENOISE_CONVERT_INC
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment