Created
March 21, 2017 11:49
-
-
Save mirceaulinic/52e42f4c30632c6224d5f133d11672d8 to your computer and use it in GitHub Desktop.
salt-output.sh
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
root@ip-172-31-13-136:~# salt device1 netmiko.send_command "show clock" | |
device1: | |
*11:46:08.849 UTC Tue Mar 21 2017 | |
root@ip-172-31-13-136:~# salt device1 netmiko.send_command "show ip interface brief" | |
device1: | |
Interface IP-Address OK? Method Status Protocol | |
GigabitEthernet1 172.31.46.249 YES DHCP up up | |
root@ip-172-31-13-136:~# salt device1 netmiko.send_command "show interfaces" | |
device1: | |
GigabitEthernet1 is up, line protocol is up | |
Hardware is CSR vNIC, address is 0a11.aabe.c10f (bia 0a11.aabe.c10f) | |
Internet address is 172.31.46.249/20 | |
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec, | |
reliability 255/255, txload 1/255, rxload 1/255 | |
Encapsulation ARPA, loopback not set | |
Keepalive set (10 sec) | |
Full Duplex, 1000Mbps, link type is auto, media type is RJ45 | |
output flow-control is unsupported, input flow-control is unsupported | |
ARP type: ARPA, ARP Timeout 04:00:00 | |
Last input 00:00:02, output 00:00:02, output hang never | |
Last clearing of "show interface" counters never | |
Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0 | |
Queueing strategy: fifo | |
Output queue: 0/40 (size/max) | |
5 minute input rate 0 bits/sec, 0 packets/sec | |
5 minute output rate 0 bits/sec, 0 packets/sec | |
541 packets input, 35059 bytes, 0 no buffer | |
Received 0 broadcasts (0 IP multicasts) | |
0 runts, 0 giants, 0 throttles | |
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored | |
0 watchdog, 0 multicast, 0 pause input | |
669 packets output, 71714 bytes, 0 underruns | |
0 output errors, 0 collisions, 0 interface resets | |
0 unknown protocol drops | |
0 babbles, 0 late collision, 0 deferred | |
0 lost carrier, 0 no carrier, 0 pause output | |
0 output buffer failures, 0 output buffers swapped out | |
root@ip-172-31-13-136:~# salt device1 netmiko.send_command "show interfaces summary" | |
device1: | |
*: interface is up | |
IHQ: pkts in input hold queue IQD: pkts dropped from input queue | |
OHQ: pkts in output hold queue OQD: pkts dropped from output queue | |
RXBS: rx rate (bits/sec) RXPS: rx rate (pkts/sec) | |
TXBS: tx rate (bits/sec) TXPS: tx rate (pkts/sec) | |
TRTL: throttle count | |
Interface IHQ IQD OHQ OQD RXBS RXPS TXBS TXPS TRTL | |
----------------------------------------------------------------------------------------------------------------- | |
* GigabitEthernet1 0 0 0 0 1000 1 1000 1 0 | |
root@ip-172-31-13-136:~# salt device1 netmiko.send_command "show arp" | |
device1: | |
Protocol Address Age (min) Hardware Addr Type Interface | |
Internet 172.31.32.1 0 0a9a.d74c.2695 ARPA GigabitEthernet1 | |
Internet 172.31.46.249 - 0a11.aabe.c10f ARPA GigabitEthernet1 | |
root@ip-172-31-13-136:~# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment