-
-
Save mithro/9f60cbd59c91b015c6491a0b2a091500 to your computer and use it in GitHub Desktop.
| # | |
| # Digilent Arty with Xilinx Artix-7 FPGA | |
| # | |
| # http://store.digilentinc.com/arty-artix-7-fpga-development-board-for-makers-and-hobbyists/ | |
| # | |
| # iManufacturer 1 Digilent | |
| # iProduct 2 Digilent USB Device | |
| # iSerial 3 210319A28C7F | |
| interface ftdi | |
| ftdi_device_desc "Digilent USB Device" | |
| ftdi_vid_pid 0x0403 0x6010 | |
| # channel 1 does not have any functionality | |
| ftdi_channel 0 | |
| # just TCK TDI TDO TMS, no reset | |
| ftdi_layout_init 0x0088 0x008b | |
| reset_config none | |
| adapter_khz 10000 | |
| source [find cpld/xilinx-xc7.cfg] | |
| source [find cpld/jtagspi.cfg] |
failed need help
lsusb->
Bus 002 Device 087: ID 0403:6010 Future Technology Devices International, Ltd FT2232C Dual USB-UART/FIFO IC
openocd -f /opt/openocd/share/openocd/scripts/target/artya735t.cfg
Open On-Chip Debugger 0.10.1+dev
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
DEPRECATED! use 'adapter driver' not 'interface'
DEPRECATED! use 'adapter speed' not 'adapter_khz'
Info : auto-selecting first available session transport "jtag". To override use 'transport select '.
jtagspi_program
Info : Listening on port 6666 for tcl connections
Info : Listening on port 4444 for telnet connections
Error: no device found
Error: unable to open ftdi device with vid 0403, pid 6010, description 'Digilent USB Device', serial '' at bus location ''
The newer Arty Device (S7 - XC7S25-CSGA324) has a different "ftdi_device_desc" and fails with this description. Perhaps leaving it out for now will be fine or x2 ftdi_device_desc.