pfSense 2.2.2 on Google Compute Engine

pfsense-gce.md

Initial install (virt-manager on Linux)

virt-install --name pfsense --ram 1024 --vcpus=1 --os-variant freebsd7 --hvm --vnc \
--controller type=scsi,model=virtio-scsi --disk path=pfSense-2.2.2.raw,size=4,bus=scsi \
--network=bridge:br0,model=virtio \
--cdrom pfSense-LiveCD-2.2.2-RELEASE-amd64.iso

Configure vtnet0 as WAN.

Post-configuration

1. Interfaces/WAN:
   • General configuration/MTU: 1460
   • DHCP client configuration/Advanced: Checked
   • DHCP client configuration/Option Modifiers: supersede subnet-mask 255.255.0.0
2. System/Advanced:
   • webConfigurator/Browser HTTP_REFERER enforcement: Checked
   • Secure Shell/Secure Shell Server: Checked (optional)

Install/configure gcloud

curl https://sdk.cloud.google.com | bash
gcloud auth login
gcloud config set project endless-gamma-92206

Import image

gsutil mb gs://pfsense
gsutil cp pfSense-2.2.2-1.tar.gz gs://pfsense
gcloud compute images create pfsense-2-2-2-1 --source-uri gs://pfsense/pfSense-2.2.2-1.tar.gz

Create instance

1. Allow HTTPS: Checked
2. Allow HTTP: Checked (optional)

References

1. https://gist.github.com/mmitchel/8661983
2. http://blog.philippklaus.de/2011/02/install-pfsense-in-kvm-on-ubuntu-10-10/
3. https://groups.google.com/forum/#!starred/gce-discussion/YWoa3Aa_49U

@marcoforese
i am a noob at pfsense and google cloud & I need you help please can you leave a mail on [email protected]

Hi all,
here are all the steps I´ve done to complete the PFSense installation on a GCP instance:

References (Credits):

• Route Card: https://groups.google.com/forum/#!topic/gce-discussion/tPYonu9dwbc

• nlienard: https://gist.github.com/nlienard/0ca5aa8397af6e90d70f

• Desra Blog: http://desrablog.blogspot.co.uk/2017/11/using-t1n1wall-on-google-compute-engine.html

• Google Cloud Documentation

• The pfsense downloads contain a disk image inside, the instructions say that you extract it, rename it (to the convention gce expects) and compress it again. you can do this in your cloud console or a linux system:
  wget https://nyifiles.pfsense.org/mirror/downloads/pfSense-CE-memstick-serial-2.4.2-RELEASE-amd64.img.gz
  gunzip pfSense-CE-memstick-serial-2.4.2-RELEASE-amd64.img.gz
  mv pfSense-CE-memstick-serial-2.4.2-RELEASE-amd64.img disk.raw
  tar -Sczf pfSense-CE-memstick-serial-2.4.2-RELEASE-amd64.img.tar.gz disk.raw

• Create an image based on the file you uploaded to the bucket:

• Activate the serial console on the project:
  sudo ./google-cloud-sdk/bin/gcloud compute project-info add-metada --metadata=serial-port-enable

• Create an instance and add a second disk to it:

• Use the serial console to perform the install:
  sudo ./google-cloud-sdk/bin/gcloud compute connect-to-serial-port [INSTANCE_NAME] -- zone [ZONE]

• Install the PFSense on the second disk:

• Create a snapshot from this disk you created:
  Create an instance from this disk:
  Use the serial to perform the setup:
  sudo ./google-cloud-sdk/bin/gcloud compute connect-to-serial-port [INSTANCE_NAME] -- zone [ZONE]

• Using the shell, disable HTTP REFERER:
  "pfSsh.php playback disablereferercheck"

from that point on, you can access the GUI with the external IP address provided on the instance.

Hope it helps someone.