Bootstrap configuration for a new RHEL or CentOS VM (set hostname, basic firewall rules, etc.)

bootstrap_centos.sh

#!/bin/bash

# Boostrap a new CentOS VM (also works with RHEL!)
# Has been used on CentOS 5.10, 6.2, 6.3, 6.4 and 6.5
# Based on https://gist.github.com/thickpaddy/1759284

# TODO: set ssh port

if test $(whoami) != "root" ; then
  echo "Error: $0 must be run as root, exiting..."
  exit 1
fi

LOG_DIR=$(cd `dirname $0` && pwd)
LOG_FILE=$LOG_DIR/$(basename ${0/.[a-z]*/.log})
rm -rf $LOG_FILE
echo $(date) > $LOG_FILE

TMP_DIR=$(cd `dirname $0` && pwd)
TMP_FILE=$TMP_DIR/$(basename ${0/.[a-z]*/.tmp})
rm -rf $TMP_FILE

# From https://gist.github.com/davejamesmiller/1965569
ask() {
  while true; do
    if [ "${2:-}" = "Y" ]; then
      prompt="Y/n"
      default=Y
    elif [ "${2:-}" = "N" ]; then
      prompt="y/N"
      default=N
    else
      prompt="y/n"
      default=
    fi

    # Ask the question
    read -p "$1 [$prompt] " REPLY

    # Default?
    if [ -z "$REPLY" ]; then
      REPLY=$default
    fi

    # Check if the reply is valid
    case "$REPLY" in
      Y*|y*) return 0 ;;
      N*|n*) return 1 ;;
    esac

  done
}

run_cmd() {
  echo -e "\e[33m$1\e[0m"
  echo $1 >> $LOG_FILE
  eval $1
}

warning() {
  echo -e "\e[31m$1\e[0m"
  if ! ask "Continue anyway?"; then
    exit 1
  fi
}

heading() {
  echo -e "\n\e[32m$1...\e[0m"
}

clean_up() {
  heading "Cleaning up"
  run_cmd "rm -f $TMP_FILE"
}

keep_original() {
  # note: --no-clobber option not supported in old versions of gnu cp
  run_cmd "if ! test -f $1.original; then cp -p $1 $1.original; fi"
}

if test $(who | wc -l | tr -d "\n") == "1" ; then
  warning "
  Only one logon session detected!

  $0 makes changes to iptables and sudoers.
  You might want to open another logon session so you can rescue yourself if something goes wrong.
  "
fi

trap "echo -e '\nInterrupted...'; exit" INT
trap exit QUIT TERM
trap clean_up EXIT

update_packages() {
  heading "Updating installed packages"
  run_cmd "yum update -y"
}

set_host_name() {
  heading "Setting host name"
  echo "Enter fully qualified domain name for this server:"
  read hostname
  run_cmd "hostname $hostname"
  config_file="/etc/sysconfig/network"
  keep_original $config_file
  run_cmd "cp -p $config_file $TMP_FILE"
  run_cmd "sed '/HOSTNAME=/d' $TMP_FILE > $config_file"
  run_cmd "echo 'HOSTNAME=$hostname' >> $config_file"
  run_cmd "rm -f $TMP_FILE"
  config_file="/etc/hosts"
  ip_address=`ifconfig eth0 | grep "inet addr" | cut -f2 -d: | cut -f1 -d' '`
  keep_original $config_file
  run_cmd "sed '/$ip_address $hostname/d' $config_file.original > $config_file"
  run_cmd "echo \"$ip_address $hostname\" >> /etc/hosts"
  if test -f /etc/init.d/rsyslog; then
    run_cmd "service rsyslog restart"
  else
    run_cmd "service syslog restart"
  fi
}

set_time_zone() {
  heading "Setting time zone"
  zone=`grep ZONE /etc/sysconfig/clock | tr -d "\n" | cut -f2 -d= | sed 's/"//g'`
  echo "Default time zone is $zone"
  if ask "Select a different time zone?"; then
    echo "Choose a region:"
    select region in Africa America Antartica Artic Asia Atlantic Australia Europe Indian Pacific; do
      echo "Choose a city:"
      select city in `find /usr/share/zoneinfo/Europe/ -type f | awk -F'/' '{ print $NF }' | sort`; do
        break;
      done
      break;
    done
    zone="$region/$city"
  fi
  echo "Setting time zone to $zone"
  config_file=/etc/sysconfig/clock
  keep_original $config_file
  run_cmd "sed '/ZONE=*/d' $config_file > $TMP_FILE"
  run_cmd "echo 'ZONE=\"$zone\"' >> $TMP_FILE"
  run_cmd "mv $TMP_FILE $config_file"
  config_file=/etc/localtime
  keep_original $config_file
  run_cmd "rm -rf $config_file"
  run_cmd "ln -sf /usr/share/zoneinfo/$zone $config_file"
}

install_ntpd() {
  heading "Installing ntpd and setting time"
  run_cmd "yum install -y ntp ntpdate"
  run_cmd "ntpdate pool.ntp.org"
  run_cmd "service ntpd start"
  run_cmd "chkconfig ntpd on"
}

disable_selinux() {
  heading "Disabling SELinux"
  config_file=/etc/selinux/config
  keep_original $config_file
  run_cmd "sed 's/^SELINUX=[a-z]*/SELINUX\=disabled/' $config_file.original > $config_file"
  run_cmd "setenforce 0"
}

configure_sudoers() {
  heading "Configuring sudoers"
  config_file=/etc/sudoers
  keep_original $config_file
  echo "Allowing members of wheel group to run all commands via sudo..."
  run_cmd "cp -p $config_file $TMP_FILE"
  run_cmd "sed 's/#[ \t]*\(%wheel[ \t]*ALL=(ALL)[ \t]*ALL\)/\1/' $config_file > $TMP_FILE"
  run_cmd "chmod 440 $TMP_FILE"
  # check format of tmp file before continuing
  visudo -q -c -s -f $TMP_FILE
  if [ $? -ne 0 ]; then
    warning "Failed to grant sudo to members of wheel group - visudo says $TMP_FILE is invalid"
  else
    grep '^%wheel' $TMP_FILE
    if [ $? -ne 0 ] ; then
      warning "Failed to grant sudo to members of wheel group - %wheel line not found in $TMP_FILE"
    else
      run_cmd "mv $TMP_FILE $config_file"
    fi
  fi
  if ! egrep "^\#includedir[[:space:]]+/etc/sudoers.d" /etc/sudoers > /dev/null; then
    echo "Updating sudoers config to include files from sudoers.d..."
    config_file=/etc/sudoers
    keep_original $config_file
    run_cmd "mkdir -p /etc/sudoers.d"
    run_cmd "cp -p $config_file $TMP_FILE"
    run_cmd "echo '#includedir /etc/sudoers.d' >> $TMP_FILE"
    visudo -q -c -s -f $TMP_FILE
    if [ $? -ne 0 ]; then
      warning "Failed to update sudoers - visudo says $TMP_FILE is invalid"
    else
      run_cmd "mv $TMP_FILE $config_file"
    fi
  fi

}

create_admins_group() {
  heading "Creating admins group"
  run_cmd "groupadd admins"
  # create custom sudoers config for members of admins group,
  # grant all privileges except abilty to run interactive shell
  echo "Allowing admins to run all commands except shells as root..."
  config_file=/etc/sudoers.d/admins
  run_cmd "rm -rf $TMP_FILE"
  run_cmd "touch $TMP_FILE"
  run_cmd "echo '# Allow admins to run all commands except an interactive shell' >> $TMP_FILE"
  run_cmd "echo 'Cmnd_Alias SHELLS = /bin/sh, /bin/csh, /bin/tcsh, /bin/bash' >> $TMP_FILE"
  run_cmd "echo 'Cmnd_Alias SU = /bin/su' >> $TMP_FILE"
  run_cmd "echo '%admins  ALL = ALL, !SU, !SHELLS' >> $TMP_FILE"
  run_cmd "chmod 440 $TMP_FILE"
  visudo -q -c -s -f $TMP_FILE
  if [ $? -ne 0 ]; then
    warning "Failed to grant sudo privileges to admins - visudo says $TMP_FILE is invalid"
  else
    run_cmd "mv $TMP_FILE $config_file"
  fi
}


create_admin_user() {
  heading "Creating admin user"
  if test $(logname) != "root" ; then
    username=$(logname)
    run_cmd "usermod -a -G admins $username"
  else
    read -p "Enter a username: " username
    run_cmd "useradd -m -G admins $username"
    run_cmd "passwd $username"
  fi
  echo "Allowing $username to run all commands as root, including shells..."
  # note: add user to sudoers, just to be on the safe side
  config_file=/etc/sudoers.d/admins
  run_cmd "sed '/^$username */d' $config_file > $TMP_FILE"
  run_cmd "chmod 440 $TMP_FILE"
  run_cmd "echo '$username ALL=(ALL) ALL' >> $TMP_FILE"
  # check format of tmp file before continuing
  visudo -q -c -s -f $TMP_FILE
  if [ $? -ne 0 ]; then
    warning "Failed to allow $username to run all commands - visudo says $TMP_FILE is invalid"
  else
    run_cmd "mv $TMP_FILE $config_file"
  fi
}

# TODO: other ssdh config settings:
#    LoginGraceTime 30    
#    MaxAuthTries 3
#    MaxStartups 3:50:10
disable_root_login() {
  heading "Disabling root login"
  config_file=/etc/ssh/sshd_config
  keep_original $config_file
  run_cmd "cp -p $config_file $TMP_FILE"
  run_cmd "sed 's/#[ \t]*PermitRootLogin[ a-zA-Z]*/PermitRootLogin no/' $TMP_FILE > $config_file"
  run_cmd "rm -f $TMP_FILE"
  grep '^PermitRootLogin no' $config_file
  if [ $? -ne 0 ] ; then
    warning "Failed to disable root login in $config_file"
  else
    run_cmd "service sshd restart"
  fi
}

forward_root_email() {
  heading "Configuring email forwarding for root"
  echo "Enter forwarding address for emails to root:"
  read email_address
  if ! [[ $email_address = *@*.* ]] ; then
    warning "Forwarding address '$email_address' does not appear to be a valid email address"
  fi
  config_file="/root/.forward"
  if test -f $config_file; then
    keep_original $config_file
  fi
  run_cmd "echo '$email_address' > $config_file"
}

set_firewall_rules() {
  heading "Setting firewall rules"
  if iptables -L INPUT | grep ^ACCEPT > /dev/null; then
    echo "Existing firewall rules found!"
    if ! ask "Replace existing rules?"; then
      return
    fi
  fi
  ssh_port_config=$(grep ^Port /etc/ssh/sshd_config)
  if [ $? -eq 0  ] ; then
    ssh_ports=$(echo $ssh_port_config | sed 's/[^0-9 ]*//g')
  else
    ssh_ports=22
  fi
  run_cmd "iptables -F"
  run_cmd "iptables -A INPUT -i lo -j ACCEPT" 
  run_cmd "iptables -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT"
  run_cmd "iptables -A INPUT -s 10.0.0.0/255.0.0.0 -j DROP"
  run_cmd "iptables -A INPUT -s 169.254.0.0/255.255.0.0 -j DROP"
  run_cmd "iptables -A INPUT -s 172.16.0.0/255.240.0.0 -j DROP"
  run_cmd "iptables -A INPUT -s 127.0.0.0/255.0.0.0 -j DROP"
  run_cmd "iptables -A INPUT -s 224.0.0.0/240.0.0.0 -j DROP"
  run_cmd "iptables -A INPUT -d 224.0.0.0/240.0.0.0 -j DROP"
  run_cmd "iptables -A INPUT -s 240.0.0.0/248.0.0.0 -j DROP"
  run_cmd "iptables -A INPUT -d 240.0.0.0/248.0.0.0 -j DROP"
  run_cmd "iptables -A INPUT -s 0.0.0.0/255.0.0.0 -j DROP"
  run_cmd "iptables -A INPUT -d 0.0.0.0/255.0.0.0 -j DROP"
  run_cmd "iptables -A INPUT -d 239.255.255.0/255.255.255.0 -j DROP"
  run_cmd "iptables -A INPUT -d 255.255.255.255 -j DROP"
  run_cmd "iptables -A INPUT -p icmp -m icmp --icmp-type 17 -j DROP"
  run_cmd "iptables -A INPUT -p icmp -m icmp --icmp-type 13 -j DROP"
  run_cmd "iptables -A INPUT -p icmp -m icmp --icmp-type any -m limit --limit 1/sec -j ACCEPT"
  run_cmd "iptables -A INPUT -m state --state INVALID -j DROP"
  run_cmd "iptables -A INPUT -p tcp -m tcp --tcp-flags RST RST -m limit --limit 2/sec --limit-burst 2 -j ACCEPT"
  run_cmd "iptables -A INPUT -m recent --rcheck --seconds 86400 --name portscan --rsource -j DROP"
  run_cmd "iptables -A INPUT -m recent --remove --name portscan --rsource"
  run_cmd "iptables -A INPUT -p tcp -m tcp --dport 139 -m recent --set --name portscan --rsource -j LOG --log-prefix 'Portscan:'"
  run_cmd "iptables -A INPUT -p tcp -m tcp --dport 139 -m recent --set --name portscan --rsource -j DROP"
  for ssh_port in $ssh_ports; do
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport $ssh_port -j ACCEPT"
  done
  if ask "Is this a web server?"; then
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT" # http
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 443 -j ACCEPT" # https
  fi
  if ask "Is this a mail server?"; then
    # TODO: allow message transfers and submissions?
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 25 -j ACCEPT" # smtp
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 587 -j ACCEPT" # submission
    # TODO: allow pop3 and pop3 over ssl?
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 110 -j ACCEPT" # pop3
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 993 -j ACCEPT" # pop3s
    # TODO: allow imap and imap over ssl?
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 143 -j ACCEPT" # imap
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 995 -j ACCEPT" # imaps
  fi
  if ask "Is this an ftp server?"; then
    # TODO: allow ftp data?
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 20 -j ACCEPT" # ftp data
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 21 -j ACCEPT" # ftp control
  fi
  if ask "Is this a dns server?"; then
    run_cmd "iptables -A INPUT -p udp -m udp --dport 53 -j ACCEPT" # udp query (max 512 bytes)
    run_cmd "iptables -A INPUT -p tcp -m tcp --dport 53 -j ACCEPT" # tcp query and zone transfers
  fi
  run_cmd "iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT"
  run_cmd "iptables -A INPUT -j REJECT --reject-with icmp-port-unreachable"
  run_cmd "iptables -A FORWARD -m state --state INVALID -j DROP"
  run_cmd "iptables -A FORWARD -m recent --rcheck --seconds 86400 --name portscan --rsource -j DROP"
  run_cmd "iptables -A FORWARD -m recent --remove --name portscan --rsource"
  run_cmd "iptables -A FORWARD -p tcp -m tcp --dport 139 -m recent --set --name portscan --rsource -j LOG --log-prefix 'Portscan:'"
  run_cmd "iptables -A FORWARD -p tcp -m tcp --dport 139 -m recent --set --name portscan --rsource -j DROP"
  run_cmd "iptables -A FORWARD -j REJECT --reject-with icmp-port-unreachable"
  run_cmd "iptables -A OUTPUT -m state --state INVALID -j DROP"
  run_cmd "iptables -A OUTPUT -o lo -j ACCEPT"
  run_cmd "iptables -A OUTPUT -m state --state RELATED,ESTABLISHED -j ACCEPT"
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 21 -j ACCEPT" # ftp
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 22 -j ACCEPT" # ssh
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 25 -j ACCEPT" # smtp
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 43 -j ACCEPT" # whois
  run_cmd "iptables -A OUTPUT -p udp -m udp --dport 53 -j ACCEPT" # dns
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 53 -j ACCEPT" # dns
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 80 -j ACCEPT" # http
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 110 -j ACCEPT" # pop3
  run_cmd "iptables -A OUTPUT -p udp -m udp --dport 123 -j ACCEPT" # ntp
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 143 -j ACCEPT" # imap
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 443 -j ACCEPT" # https
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 587 -j ACCEPT" # submission
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 993 -j ACCEPT" # pop3s
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 995 -j ACCEPT" # imaps
  run_cmd "iptables -A OUTPUT -p tcp -m tcp --dport 9418 -j ACCEPT" # git
  run_cmd "iptables -A OUTPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT"
  run_cmd "iptables -A OUTPUT -j REJECT --reject-with icmp-port-unreachable"

  run_cmd "service iptables save"
  run_cmd "chkconfig iptables on"
  run_cmd "service iptables restart"
}

set_kernel_params() {
  heading "Setting kernel parameters"
  params="
    # Reboot after a kernel panic
    kernel.panic = 10

    # Panic kernel when out of memory
    vm.panic_on_oom = 1

    # Enable TCP SYN Cookie Protection
    net.ipv4.tcp_syncookies = 1

    # Disable IP Source Routing
    net.ipv4.conf.all.accept_source_route = 0
    net.ipv4.conf.default.accept_source_route = 0

    # Disable ICMP Redirect Acceptance
    net.ipv4.conf.all.accept_redirects = 0

    # Enable IP Spoofing Protection
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.conf.default.rp_filter = 1

    # Disable TCP timestamps (information leakage)
    net.ipv4.tcp_timestamps = 0

    # Don't allow outsiders to alter the routing tables
    net.ipv4.conf.all.accept_redirects = 0
    net.ipv4.conf.default.accept_redirects = 0
    net.ipv4.conf.all.secure_redirects = 0
    net.ipv4.conf.default.secure_redirects = 0

    # Don't pass traffic between networks or act as a router
    net.ipv4.ip_forward = 0
    net.ipv4.conf.all.send_redirects = 0
    net.ipv4.conf.default.send_redirects = 0

    # Allow ICMP echo for basic monitoring
    net.ipv4.icmp_echo_ignore_all = 0
    net.ipv4.icmp_echo_ignore_broadcasts = 0

    # Enable Bad Error Message Protection
    net.ipv4.icmp_ignore_bogus_error_responses = 1
  "
  if test -f "/proc/sys/net/ipv6/conf/all/disable_ipv6"; then
    ipv6_params="
      # Disable IPv6
      net.ipv6.conf.all.disable_ipv6 = 1
      net.ipv6.conf.default.disable_ipv6 = 1
      net.ipv6.conf.lo.disable_ipv6 = 1
    "
    params="$params$ipv6_params"
  else
    warning "Unable to disable ipv6 in kernel, /proc/sys/net/ipv6/conf/all/disable_ipv6 not found"
  fi
  params=$(echo "$params" | sed 's/^[ \t]*//')
  config_file=/etc/sysctl.conf
  if test -f "$config_file.original"; then
    echo "$config_file.original exists, restoring"
    run_cmd "mv $config_file.original $config_file"
  fi
  keep_original $config_file
  # note: multiple echo comamnds are easier to log
  while read -r line; do
    run_cmd "echo \"$line\" >> $config_file"
  done <<< "$params"
  run_cmd "sysctl -p > /dev/null"
}

disable_ipv6_networking() {
  heading "Disabling IPv6 in network config"
  config_file=/etc/sysconfig/network
  keep_original $config_file
  run_cmd "cp -p $config_file $TMP_FILE"
  run_cmd "sed '/NETWORKING_IPV6*/d' $TMP_FILE > $config_file"
  run_cmd "echo 'NETWORKING_IPV6=no' >> $config_file"
  run_cmd "rm -f $TMP_FILE"
  run_cmd "service ip6tables stop"
  run_cmd "chkconfig ip6tables off"
  run_cmd "service network restart"
  if test -f /etc/init.d/postfix; then
    run_cmd "postconf -e inet_protocols=ipv4"
    run_cmd "service postfix restart"
  fi
}

add_epel_repo() {
  heading "Adding Extra Packages for Enterprise Linux repo"
  redhat_release_major_version=$(sed -r 's/.*release ([0-9])\.[0-9].*/\1/' /etc/redhat-release | tr -d '\n')
  case $redhat_release_major_version in
    5)
      run_cmd "rpm -Uvh http://www.mirrorservice.org/sites/dl.fedoraproject.org/pub/epel/5/i386/epel-release-5-4.noarch.rpm"
      ;;
    6)
      run_cmd "rpm -Uvh http://www.mirrorservice.org/sites/dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm"
      ;;
    *)
      warning "Failed to add EPEL repo, unknown RHEL version '$redhat_release_major_version'"
      ;;    
  esac
}

install_fail2ban() {
  heading "Installing fail2ban"
  run_cmd "yum install -y fail2ban"
  
  heading "Configuring fail2ban"
  config_file=/etc/fail2ban/jail.local
  if test -f $config_file; then
    keep_original $config_file
  fi

  # configure ignoreip...
  login_user=$(logname)
  login_ip=$(who | grep $login_user | head -n1 | awk '{ print $NF }' | tr -d '()')
  ignore_ip="127.0.0.1 $login_ip"
  echo "Setting ignoreip to '$ignore_ip' (note: your ip is $login_ip)"
  if ask "Override with a custom value?"; then
    read -p "Enter ip addresses and/or host names separated by spaces: " input
   ignore_ip="$input" 
  fi
  config="
    [DEFAULT]
    ignoreip = $ignore_ip
  "

  # add local jail for non-standard ssh port
  non_standard_ssh_port=$(grep ^Port /etc/ssh/sshd_config | grep -v 22 | awk '{ print $NF }')
  if test "$non_standard_ssh_port" != ""; then
    non_standard_ssh_port_config="
      [ssh-iptables-$non_standard_ssh_port]
      enabled  = true
      filter   = sshd
      action   = iptables[name=SSH, port=$non_standard_ssh_port, protocol=tcp]
                 sendmail-whois[name=SSH, dest=root, [email protected]]
      logpath  = /var/log/secure
      maxretry = 5
    "
    config="$config$non_standard_ssh_port_config"
  fi

  # write config to jail.local, line by line so we can log it
  config_file=/etc/fail2ban/jail.local
  run_cmd "rm -rf $config_file"
  run_cmd "touch $config_file"
  while read -r line; do
    run_cmd "echo \"$line\" >> $config_file"
  done <<< "$config"

  run_cmd "chkconfig fail2ban on"
  if $(service fail2ban status &> /dev/null); then
    run_cmd "service fail2ban restart"
  else
    run_cmd "service fail2ban start"
  fi
}

install_packages() {
  heading "Installing cron, ruby, git and some other utils"
  run_cmd "yum install -y ruby ruby-devel rubygems git vim-enhanced nc bind-utils mailx"
  run_cmd "yum info cronie &> /dev/null && yum install -y cronie"
}

remove_anacron() {
  heading "Removing anacron and reverting to old style daily jobs"
  run_cmd "yum info cronie-noanacron &> /dev/null && yum install -y cronie-noanacron; yum remove -y cronie-anacron"
}

disable_fingerprint_auth() {
  # Disable authentication with fingerprint readers to avoid errors in
  # secure log, e.g. PAM unable to dlopen(/lib64/security/pam_fprintd.so)
  authconfig --disablefingerprint --update
}

update_packages
set_host_name
set_time_zone
install_ntpd
disable_selinux
update_authconfig
configure_sudoers
create_admins_group
create_admin_user
disable_root_login
forward_root_email
set_firewall_rules
set_kernel_params
disable_ipv6_networking
add_epel_repo
install_fail2ban
install_packages
remove_anacron
disable_fingerprint_auth

Y u not use chef ?

Can't always, but I still want a quick way of setting some basic config stuff on a new vm

Just kidding :-) How is London these days?

Busy place, but lots of interesting stuff going on. Where are you these days? Still in Laos? Enjoying it?

You should really use Chef/Puppet, Mark :)

Thanks Martin, you're right, where did I go wrong? ;-)

Anywhere :) I know it wasn't useful advice :) I just have A nightmare from Bash every time when I see it :) I prefer Ruby -> Chef use :) Anyway, are you still in London? I'm going to London at 90 % for few days this summer (probably in August).

Hey Martin, yeah, I'm still in London. Let me know if you do make it over for a few days, we should meet up for lunch or a coffee. Maybe see if Andy is around too.

Of course! Sorry for delay. Github haven't notified me about your last response. I'll let you know!