Last active
July 18, 2023 04:25
-
-
Save moonthug/00be814d0ed82fc0bdde39e5337f02a6 to your computer and use it in GitHub Desktop.
Ender 6 Start GCode
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| M117 Setup Machine...; | |
| M201 X500.00 Y500.00 Z100.00 E5000.00 ; Setup machine max acceleration | |
| M203 X500.00 Y500.00 Z10.00 E50.00 ; Setup machine max feed-rate | |
| M204 P500.00 R1000.00 T500.00 ; Setup Print/Retract/Travel acceleration | |
| M205 X8.00 Y8.00 Z0.40 E5.00 ; Setup Jerk | |
| M412 S1 ; Enable fillament sensor | |
| M413 S0 ; Disable print powerloss recovery | |
| M220 S100 ; Reset Feedrate | |
| M221 S100 ; Reset Flowrate | |
| M117 Start warming...; | |
| M104 S{material_print_temperature} ; Start warming hot-end | |
| M140 S{material_bed_temperature_layer_0} ; Start warming bed | |
| G28 ; Home all axes | |
| M117 Waiting for Temperature...; | |
| M190 S{material_bed_temperature_layer_0} ; Wait for bed | |
| ;M117 Leveling...; | |
| ;M155 S30 ; Reduce temperature reporting rate to reduce output pollution | |
| ;@BEDLEVELVISUALIZER ; Tell the plugin to watch for reported mesh | |
| ;G29 T ; Auto bed-level with report (BL-Touch) | |
| ;M155 S3 ; Reset temperature reporting | |
| M117 Waiting for Hot-end...; | |
| M109 S{material_print_temperature} ; Wait for hot-end | |
| G92 E0 ; Reset Extruder | |
| M117 Preparing...; | |
| G1 Z2.0 F3000 ; Move Z Axis up | |
| G1 X10 Y10 Z0.3 F5000.0 ; Move to start position | |
| G1 X200 Y10.0 Z0.3 F1500.0 E15 ; Draw the first line | |
| G1 X200 Y9.7 Z0.3 F5000.0 ; Move to side a little | |
| G1 X10 Y9.7 Z0.3 F1500.0 E30 ; Draw the second line M117 Setup Machine...; | |
| M201 X500.00 Y500.00 Z100.00 E5000.00 ; Setup machine max acceleration | |
| M203 X500.00 Y500.00 Z10.00 E50.00 ; Setup machine max feed-rate | |
| M204 P500.00 R1000.00 T500.00 ; Setup Print/Retract/Travel acceleration | |
| M205 X8.00 Y8.00 Z0.40 E5.00 ; Setup Jerk | |
| M412 S1 ; Enable fillament sensor | |
| M413 S0 ; Disable print powerloss recovery | |
| M220 S100 ; Reset Feedrate | |
| M221 S100 ; Reset Flowrate | |
| M117 Start warming...; | |
| M104 S{material_print_temperature} ; Start warming hot-end | |
| M140 S{material_bed_temperature_layer_0} ; Start warming bed | |
| G28 ; Home all axes | |
| M117 Waiting for Temperature...; | |
| M190 S{material_bed_temperature_layer_0} ; Wait for bed | |
| ; Bed Leveling disabled | |
| ;M117 Leveling...; | |
| ;M155 S30 ; Reduce temperature reporting rate to reduce output pollution | |
| ;@BEDLEVELVISUALIZER ; Tell the plugin to watch for reported mesh | |
| ;G29 T ; Auto bed-level with report (BL-Touch) | |
| ;M155 S3 ; Reset temperature reporting | |
| M117 Waiting for Hot-end...; | |
| M109 S{material_print_temperature} ; Wait for hot-end | |
| G92 E0 ; Reset Extruder | |
| M117 Preparing...; | |
| G1 Z2.0 F3000 ; Move Z Axis up | |
| G1 X10 Y10 Z0.3 F5000.0 ; Move to start position | |
| G1 X200 Y10.0 Z0.3 F1500.0 E15 ; Draw the first line | |
| G1 X200 Y9.7 Z0.3 F5000.0 ; Move to side a little | |
| G1 X10 Y9.7 Z0.3 F1500.0 E30 ; Draw the second line |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
It is designed for an Ender 6 + BLTouch, with OctoPrint and the Bed Visualiser plugin enabled.