Vagrantfile to deploy a VM to ESXi, uses Ansible to provision users and install additional packages, also has conditional statements to alter the configuration for different server types

Vagrantfile

#
#  Fully documented Vagrantfile available
#  in the wiki:  https://github.com/josenk/vagrant-vmware-esxi/wiki
vm_name = File.basename(Dir.getwd)
vm_cpus = '2'
vm_ram = '4'
if vm_name.include? "web"
  vm_ram ='2'
end

vm_network = ['LAN']
vm_datastore = 'datastore3'
vm_hwversion = '14'

Vagrant.configure('2') do |config|
  config.vm.define vm_name
  config.vm.hostname = vm_name

  #  Box, Select any box created for VMware that is compatible with
  #    the ovftool.  To get maximum compatibility You should download
  #    and install the latest version of ovftool for your OS.
  #    https://www.vmware.com/support/developer/ovf/
  #
  #    If your box is stuck at 'Powered On', then most likely
  #    the box/vm doesn't have the vmware tools installed.
  #
  # Here are some of the MANY examples....
  #config.vm.box = 'hashicorp/precise64'
  #config.vm.box = 'generic/centos7'
  #config.vm.box = 'generic/centos6'
  #config.vm.box = 'generic/fedora27'
  #config.vm.box = 'generic/freebsd11'
  #config.vm.box = 'generic/ubuntu1710'
  #config.vm.box = 'generic/debian9'
  #config.vm.box = 'steveant/CentOS-7.0-1406-Minimal-x64'
  #config.vm.box = 'geerlingguy/centos7'
  #config.vm.box = 'geerlingguy/ubuntu1604'
  #config.vm.box = 'laravel/homestead'
  #config.vm.box = 'puphpet/debian75-x64'
  config.vm.box = 'centos/7'


  #  Use rsync and NFS synced folders. (or use the option to disable them)
  #    https://www.vagrantup.com/docs/synced-folders/
  #config.vm.synced_folder('.', '/vagrant', type: 'rsync')
  config.vm.synced_folder('.', '/vagrant', type: 'nfs', disabled: true)
  #config.vm.synced_folder("etc/", "/etc/", owner: "root", group: "root")

  #  Vagrant can configure additional network interfaces using a static IP or
  #  DHCP. Use public_network or private_network to manually set a static IP and
  #  optionally netmask.  ESXi doesn't use the concept of public or private
  #  networks so both are valid here.  The primary network interface is considered the
  #  "vagrant management" interface and cannot be changed and this plugin
  #  supports 4 NICS, so you can specify 3 entries here!
  #
  #  https://www.vagrantup.com/docs/networking/public_network.html
  #  https://www.vagrantup.com/docs/networking/private_network.html
  #
  #    *** Invalid settings could cause 'vagrant up' to fail ***
  #config.vm.network 'private_network', ip: '192.168.1.57', netmask: '255.255.255.0'
  #config.vm.network 'private_network', ip: '192.168.11.170'
  #config.vm.network 'public_network', ip: '192.168.12.170'

  #
  #  Provider (esxi) settings
  #
  config.vm.provider :vmware_esxi do |esxi|

    #  REQUIRED!  ESXi hostname/IP
    esxi.esxi_hostname = '192.168.1.5'

    #  ESXi username
    esxi.esxi_username = 'root'

    #  IMPORTANT!  Set ESXi password.
    #    1) 'prompt:'
    #    2) 'file:'  or  'file:my_secret_file'
    #    3) 'env:'  or 'env:my_secret_env_var'
    #    4) 'key:'  or  key:~/.ssh/some_ssh_private_key'
    #    5) or esxi.esxi_password = 'my_esxi_password'
    #
    esxi.esxi_password = 'file:'

    #  SSH port.
    #esxi.esxi_hostport = 22

    #  HIGHLY RECOMMENDED!  ESXi Virtual Network
    #    You should specify an ESXi Virtual Network!  If it's not specified, the
    #    default is to use the first found.  You can specify up to 4 virtual
    #    networks using an array format.
    esxi.esxi_virtual_network = vm_network

    #  OPTIONAL.  Specify a Disk Store
    esxi.esxi_disk_store = vm_datastore

    #  OPTIONAL.  Resource Pool
    #     Vagrant will NOT create a Resource pool it for you.
    #esxi.esxi_resource_pool = '/Vagrant'

    #  Optional. Specify a VM to clone instead of uploading a box.
    #    Vagrant can use any stopped VM as the source 'box'.   The VM must be
    #    registered, stopped and must have the vagrant insecure ssh key installed.
    #    If the VM is stored in a resource pool, it must be specified.
    #    See wiki: https://github.com/josenk/vagrant-vmware-esxi/wiki/How-to-clone_from_vm
    #esxi.clone_from_vm = 'resource_pool/source_vm'

    #  OPTIONAL.  Guest VM name to use.
    #    The Default will be automatically generated.
    esxi.guest_name = vm_name

    #  OPTIONAL.  When automatically naming VMs, use this prifix.
    esxi.guest_name_prefix = 'V-'


    #  OPTIONAL.  Set the guest username login.  The default is 'vagrant'.
    esxi.guest_username = 'vagrant'

    #  OPTIONAL.  Memory size override
    vm_ramgb = vm_ram.to_i * 1024
    esxi.guest_memsize = vm_ramgb

    #  OPTIONAL.  Virtual CPUs override
    esxi.guest_numvcpus = vm_cpus

    #  OPTIONAL & RISKY.  Specify up to 4 MAC addresses
    #    The default is ovftool to automatically generate a MAC address.
    #    You can specify an array of MAC addresses using upper or lower case,
    #    separated by colons ':'.
    #esxi.guest_mac_address = ['00:50:56:aa:bb:cc', '00:50:56:01:01:01','00:50:56:02:02:02','00:50:56:BE:AF:01' ]

    #   OPTIONAL & RISKY.  Specify a guest_nic_type
    #     The validated list of guest_nic_types are 'e1000', 'e1000e', 'vmxnet',
    #     'vmxnet2', 'vmxnet3', 'Vlance', and 'Flexible'.
    #esxi.guest_nic_type = 'e1000'

    #  OPTIONAL. Specify a disk type.
    #    If unspecified, it will be set to 'thin'.  Otherwise, you can set to
    #    'thin', 'thick', or 'eagerzeroedthick'
    #esxi.guest_disk_type = 'thick'

    #  OPTIONAL. Boot disk size.
    #    If unspecified, the boot disk size will be the same as the original
    #    box.  You can specify a larger boot disk size in GB.  The extra disk space
    #    will NOT automatically be available to your OS.  You will need to
    #    create or modify partitions, LVM and/or filesystems.
    #esxi.guest_boot_disk_size = 30

    #  OPTIONAL.  Create additional storage for guests.
    #    You can specify an array of up to 13 virtual disk sizes (in GB) that you
    #    would like the provider to create once the guest has been created.  You
    #    can optionally specify the size and datastore using a hash.
    #esxi.guest_storage = [ 10, 20, { size: 30, datastore: 'datastore1' } ]

    #  OPTIONAL. specify snapshot options.
    #esxi.guest_snapshot_includememory = 'true'
    #esxi.guest_snapshot_quiesced = 'true'

    #  RISKY. guest_guestos
    #    https://github.com/josenk/vagrant-vmware-esxi/ESXi_guest_guestos_types.md
    #esxi.guest_guestos = 'centos-64'

    #  OPTIONAL. guest_virtualhw_version
    #    ESXi 6.5 supports these versions. 4,7,8,9,10,11,12,13 & 14.
    esxi.guest_virtualhw_version = vm_hwversion

    #  RISKY. guest_custom_vmx_settings
    #esxi.guest_custom_vmx_settings = [['vhv.enable','TRUE'], ['floppy0.present','TRUE']]

    #  OPTIONAL. local_lax
    #esxi.local_lax = 'true'

    #  OPTIONAL. Guest IP Caching
    #esxi.local_use_ip_cache = 'True'

    #  DANGEROUS!  Allow Overwrite
    #    If unspecified, the default is to produce an error if overwriting
    #    vm's and packages.
    #esxi.local_allow_overwrite = 'True'

    #  Advanced Users.
    #    If set to 'True', all WARNINGS will produce a FAILURE and vagrant will stop.
    #esxi.local_failonwarning = 'True'

    #  Plugin debug output.
    #    Please send any bug reports with this debug output...
    #esxi.debug = 'true'

  end
  config.vm.provision "ansible" do |ansible|
    ansible.playbook = "../provisioning/common.yml"
    #ansible.inventory_path = "provisioning/inventory"
    ansible.become = true
    ansible.compatibility_mode = "2.0"
  end

  if vm_name.include? "web"
    config.vm.provision "ansible" do |ansible|
      ansible.playbook = "../provisioning/web.yml"
      #ansible.inventory_path = "provisioning/inventory"
      ansible.become = true
      ansible.compatibility_mode = "2.0"
    end
  end



#  config.vm.provision "file", source: "tmp/", destination: "/"
  config.vm.provision "shell" do |s|
    s.inline = <<-SHELL
      echo $0
      IP_ADDRESS=$(hostname -I)
      #IP_ADDRESS=$(ip a s|sed -ne '/127.0.0.1/!{s/^[ \t]*inet[ \t]*\([0-9.]\+\)\/.*$/\1/p}')
      echo -e "Build completed\nIP Address: ${IP_ADDRESS}"
      echo "Users with authorized_keys:"
      for X in $(cut -f6 -d ':' /etc/passwd |sort |uniq); do
        for suffix in "" "2"; do
          if [ -s "${X}/.ssh/authorized_keys$suffix" ]; then
            if [ ${X} != /home/vagrant ]; then
              echo -e "• $(echo ${X} | sed 's_/home/__g')"
            fi
          fi;
        done;
      done
    SHELL
  end
end