A little script to get disks informations

disks_infos.sh

#!/bin/bash

# Tooling: Debian
#  apt install smartmontools sysstat hdparm

# Sata infos
# SATA revision 1.0 => 1.5 Gbit/s, 150 MB/s
# SATA revision 2.0 => 3 Gbit/s, 300 MB/s
# SATA revision 3.0 => 6 Gbit/s, 600 MB/s
# SATA revision 3.2 => 16 Gbit/s, 1969 MB/s

# Determine your sata disk speed:
# dmesg | grep -i --color ahci 
# dmesg | grep -i sata | grep 'link up' 
# dmesg | grep -i ahci | grep -i --color Gbps 


# Determine disk stat support
#  for i in /dev/[vs]d? ; do echo $i ; smartctl -i $i | grep "^SATA" ; done
# Determine disk rpm
#  for i in /dev/[vs]d? ; do echo $i ; hdparm -I $i | grep -i Rotation ; done
# Check read speed:
#  hdparm -Tt /dev/sda


# To track IO in live:
# iostat  -xm 2 | grep -E "^sd|Device"
# iotop


set -eu

show_disks ()
{
	for i in /dev/[vs]d? ; do
		echo "Disk info for: $i"
		local hdparm_out=$( hdparm -I $i )
		echo "$hdparm_out" | grep -i Rotation 
		echo "$hdparm_out" | grep -i "Model Number:" 
		echo "$hdparm_out" | grep -i "Serial Number:" 
		echo "$hdparm_out" | grep -i "Firmware Revision:" 
		echo "$hdparm_out" | grep -i "Transport:" 
		echo "$hdparm_out" | grep -i "device size with" 

		local smartctl_out=$( smartctl -a $i )
		#smartctl -i $i | sed 's/^/        /' | grep "      SATA"
		#smartctl -H $i 
		echo "$smartctl_out" | grep "SATA"
		echo "$smartctl_out" | grep "Model Family:"
		echo "$smartctl_out" | grep "User Capacity:"
		echo "$smartctl_out" | grep "Rotation Rate:"
		echo "$smartctl_out" | grep "SMART supprt"
		echo "$smartctl_out" | grep "SMART overall-health"
	done

}



main ()
{
	local dest=$1
	local scheme=${2:-medium}

	local bs count
	case "$scheme" in
		large)
			bs=10M
			count=100
		;;
		medium)
			bs=1M
			count=1000
		;;
		small)
			bs=1K
			count=1000000
		;;
		*)
		  echo "ERROR: Unknown scheme: $scheme"
		  exit 1
		;;
	esac

	# Destination check
	if [[ ! -d "$dest" ]]; then
		echo "ERROR: Destination is not a directory: $dest"
		exit 1
  fi

	# Destination size check
  local disk_av=$(df $dest | tail -n -1  | awk '{print $4 }')
	if [[ "$disk_av" -lt 1500 ]]; then
		echo "ERROR: Not enough disk space, only $disk_av available instaead of 1500"
		exit 1
  fi


	echo "INFO: Starting speed test on $dest/ZERO_FILE"
	time dd if=/dev/zero of=$dest/ZERO_FILE bs=$bs count=$count status=progress oflag=direct
	rm $dest/ZERO_FILE 2>/dev/null || true

}

main $@