Created
May 28, 2017 17:58
-
-
Save mrquincle/bd7ec3f1cf29ad2fb855dff14714e40c to your computer and use it in GitHub Desktop.
Yoga 900 freeze, but wakes up after a while this time! So I've a log!
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[84348.792760] iwlwifi 0000:01:00.0: No association and the time event is over already... | |
[84348.792779] wlp1s0: Connection to AP ec:08:6b:31:b5:95 lost | |
[84352.182148] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[84352.202044] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[84682.170512] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[84682.245826] wlp1s0: authenticate with ec:08:6b:31:b5:95 | |
[84682.253990] wlp1s0: send auth to ec:08:6b:31:b5:95 (try 1/3) | |
[84682.265379] wlp1s0: authenticated | |
[84682.269027] wlp1s0: associate with ec:08:6b:31:b5:95 (try 1/3) | |
[84682.281220] wlp1s0: RX AssocResp from ec:08:6b:31:b5:95 (capab=0x431 status=0 aid=1) | |
[84682.286383] wlp1s0: associated | |
[84682.286456] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready | |
[84682.292530] wlp1s0: disassociated from ec:08:6b:31:b5:95 (Reason: 7) | |
[84682.473230] wlp1s0: authenticate with ec:08:6b:32:0a:53 | |
[84682.482554] wlp1s0: send auth to ec:08:6b:32:0a:53 (try 1/3) | |
[84682.486807] wlp1s0: authenticated | |
[84682.489127] wlp1s0: associate with ec:08:6b:32:0a:53 (try 1/3) | |
[84682.493404] wlp1s0: RX AssocResp from ec:08:6b:32:0a:53 (capab=0x11 status=0 aid=4) | |
[84682.503667] wlp1s0: associated | |
[84692.988148] systemd[1]: snapd.refresh.timer: Adding 1h 41min 36.264537s random time. | |
[95025.329966] atkbd serio0: Unknown key pressed (translated set 2, code 0xbf on isa0060/serio0). | |
[95025.329968] atkbd serio0: Use 'setkeycodes e03f <keycode>' to make it known. | |
[95025.337706] atkbd serio0: Unknown key released (translated set 2, code 0xbf on isa0060/serio0). | |
[95025.337707] atkbd serio0: Use 'setkeycodes e03f <keycode>' to make it known. | |
[95027.593046] ata3.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen | |
[95027.593050] ata3.00: failed command: WRITE FPDMA QUEUED | |
[95027.593053] ata3.00: cmd 61/98:00:00:40:23/02:00:18:00:00/40 tag 0 ncq dma 339968 out | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593055] ata3.00: status: { DRDY } | |
[95027.593056] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593059] ata3.00: cmd 60/08:08:d8:2b:78/00:00:13:00:00/40 tag 1 ncq dma 4096 in | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593060] ata3.00: status: { DRDY } | |
[95027.593061] ata3.00: failed command: WRITE FPDMA QUEUED | |
[95027.593064] ata3.00: cmd 61/a0:10:60:56:e0/01:00:17:00:00/40 tag 2 ncq dma 212992 out | |
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593065] ata3.00: status: { DRDY } | |
[95027.593066] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593069] ata3.00: cmd 60/d8:18:28:6a:36/00:00:06:00:00/40 tag 3 ncq dma 110592 in | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593070] ata3.00: status: { DRDY } | |
[95027.593071] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593074] ata3.00: cmd 60/40:20:b0:c3:e4/00:00:05:00:00/40 tag 4 ncq dma 32768 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593075] ata3.00: status: { DRDY } | |
[95027.593076] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593078] ata3.00: cmd 60/50:28:18:c4:e4/00:00:05:00:00/40 tag 5 ncq dma 40960 in | |
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593080] ata3.00: status: { DRDY } | |
[95027.593081] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593083] ata3.00: cmd 60/08:30:98:c4:e4/00:00:05:00:00/40 tag 6 ncq dma 4096 in | |
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593084] ata3.00: status: { DRDY } | |
[95027.593085] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593088] ata3.00: cmd 60/08:38:a8:c4:e4/00:00:05:00:00/40 tag 7 ncq dma 4096 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593089] ata3.00: status: { DRDY } | |
[95027.593090] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593092] ata3.00: cmd 60/08:40:e0:fc:a2/00:00:06:00:00/40 tag 8 ncq dma 4096 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593094] ata3.00: status: { DRDY } | |
[95027.593095] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593097] ata3.00: cmd 60/18:48:40:fd:a2/00:00:06:00:00/40 tag 9 ncq dma 12288 in | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593099] ata3.00: status: { DRDY } | |
[95027.593100] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593102] ata3.00: cmd 60/00:50:48:07:0f/01:00:07:00:00/40 tag 10 ncq dma 131072 in | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593103] ata3.00: status: { DRDY } | |
[95027.593104] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593107] ata3.00: cmd 60/08:58:a0:f8:a5/00:00:06:00:00/40 tag 11 ncq dma 4096 in | |
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593108] ata3.00: status: { DRDY } | |
[95027.593109] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593112] ata3.00: cmd 60/08:60:e0:f8:a5/00:00:06:00:00/40 tag 12 ncq dma 4096 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593113] ata3.00: status: { DRDY } | |
[95027.593114] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593117] ata3.00: cmd 60/30:68:f8:f8:a5/00:00:06:00:00/40 tag 13 ncq dma 24576 in | |
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593118] ata3.00: status: { DRDY } | |
[95027.593119] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593121] ata3.00: cmd 60/08:70:00:5c:b8/00:00:04:00:00/40 tag 14 ncq dma 4096 in | |
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593123] ata3.00: status: { DRDY } | |
[95027.593124] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593126] ata3.00: cmd 60/08:78:20:5c:b8/00:00:04:00:00/40 tag 15 ncq dma 4096 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593127] ata3.00: status: { DRDY } | |
[95027.593128] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593131] ata3.00: cmd 60/a8:80:40:5c:b8/00:00:04:00:00/40 tag 16 ncq dma 86016 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593132] ata3.00: status: { DRDY } | |
[95027.593133] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593136] ata3.00: cmd 60/10:88:f0:5c:b8/00:00:04:00:00/40 tag 17 ncq dma 8192 in | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593137] ata3.00: status: { DRDY } | |
[95027.593138] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593140] ata3.00: cmd 60/80:90:28:04:a6/00:00:06:00:00/40 tag 18 ncq dma 65536 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593142] ata3.00: status: { DRDY } | |
[95027.593143] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593145] ata3.00: cmd 60/08:98:c0:04:a6/00:00:06:00:00/40 tag 19 ncq dma 4096 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593147] ata3.00: status: { DRDY } | |
[95027.593148] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593150] ata3.00: cmd 60/08:a0:30:c2:84/00:00:16:00:00/40 tag 20 ncq dma 4096 in | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593151] ata3.00: status: { DRDY } | |
[95027.593152] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593155] ata3.00: cmd 60/10:a8:c0:16:a5/00:00:06:00:00/40 tag 21 ncq dma 8192 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593156] ata3.00: status: { DRDY } | |
[95027.593157] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593159] ata3.00: cmd 60/20:b0:f8:16:a5/00:00:06:00:00/40 tag 22 ncq dma 16384 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593161] ata3.00: status: { DRDY } | |
[95027.593162] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593164] ata3.00: cmd 60/18:b8:28:17:a5/00:00:06:00:00/40 tag 23 ncq dma 12288 in | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593166] ata3.00: status: { DRDY } | |
[95027.593167] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593169] ata3.00: cmd 60/08:c0:18:70:f1/00:00:17:00:00/40 tag 24 ncq dma 4096 in | |
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593170] ata3.00: status: { DRDY } | |
[95027.593171] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593174] ata3.00: cmd 60/08:c8:80:45:f3/00:00:17:00:00/40 tag 25 ncq dma 4096 in | |
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593175] ata3.00: status: { DRDY } | |
[95027.593176] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593179] ata3.00: cmd 60/30:d0:90:45:f3/00:00:17:00:00/40 tag 26 ncq dma 24576 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593180] ata3.00: status: { DRDY } | |
[95027.593181] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593184] ata3.00: cmd 60/00:d8:00:03:97/0a:00:16:00:00/40 tag 27 ncq dma 1310720 in | |
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593185] ata3.00: status: { DRDY } | |
[95027.593186] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593188] ata3.00: cmd 60/40:e0:00:0d:97/05:00:16:00:00/40 tag 28 ncq dma 688128 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593190] ata3.00: status: { DRDY } | |
[95027.593191] ata3.00: failed command: READ FPDMA QUEUED | |
[95027.593193] ata3.00: cmd 60/c0:e8:40:12:97/04:00:16:00:00/40 tag 29 ncq dma 622592 in | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593194] ata3.00: status: { DRDY } | |
[95027.593196] ata3.00: failed command: WRITE FPDMA QUEUED | |
[95027.593198] ata3.00: cmd 61/48:f0:b8:2e:ea/01:00:17:00:00/40 tag 30 ncq dma 167936 out | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[95027.593199] ata3.00: status: { DRDY } | |
[95027.593203] ata3: hard resetting link | |
[95027.907266] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
[95027.910932] ata3.00: configured for UDMA/133 | |
[95027.921046] ata3: EH complete | |
[95029.100716] wlp1s0: deauthenticating from ec:08:6b:32:0a:53 by local choice (Reason: 3=DEAUTH_LEAVING) | |
[95029.243170] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[95033.225948] PM: Syncing filesystems ... done. | |
[95033.231722] PM: Preparing system for sleep (mem) | |
[95033.239257] Freezing user space processes ... (elapsed 0.762 seconds) done. | |
[95034.002221] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. | |
[95034.004161] PM: Suspending system (mem) | |
[95034.004231] Suspending console(s) (use no_console_suspend to debug) | |
[95034.045742] sd 2:0:0:0: [sda] Synchronizing SCSI cache | |
[95034.045830] sd 2:0:0:0: [sda] Stopping disk | |
[95034.141387] ACPI : EC: event blocked | |
[95035.279143] PM: suspend of devices complete after 1274.550 msecs | |
[95035.301047] PM: late suspend of devices complete after 21.900 msecs | |
[95035.301985] ACPI : EC: interrupt blocked | |
[95035.304712] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI | |
[95035.341139] PM: noirq suspend of devices complete after 40.086 msecs | |
[95035.342191] ACPI: Preparing to enter system sleep state S3 | |
[95035.346007] ACPI : EC: EC stopped | |
[95035.346008] PM: Saving platform NVS memory | |
[95035.346042] Disabling non-boot CPUs ... | |
[95035.346901] Broke affinity for irq 277 | |
[95035.348005] smpboot: CPU 1 is now offline | |
[95035.364242] Broke affinity for irq 122 | |
[95035.364248] Broke affinity for irq 123 | |
[95035.364253] Broke affinity for irq 124 | |
[95035.364296] Broke affinity for irq 277 | |
[95035.364301] Broke affinity for irq 280 | |
[95035.366468] smpboot: CPU 2 is now offline | |
[95035.388155] Broke affinity for irq 1 | |
[95035.388162] Broke affinity for irq 8 | |
[95035.388166] Broke affinity for irq 9 | |
[95035.388171] Broke affinity for irq 14 | |
[95035.388176] Broke affinity for irq 16 | |
[95035.388180] Broke affinity for irq 17 | |
[95035.388185] Broke affinity for irq 19 | |
[95035.388193] Broke affinity for irq 51 | |
[95035.388201] Broke affinity for irq 87 | |
[95035.388210] Broke affinity for irq 122 | |
[95035.388214] Broke affinity for irq 123 | |
[95035.388218] Broke affinity for irq 124 | |
[95035.388255] Broke affinity for irq 277 | |
[95035.388262] Broke affinity for irq 278 | |
[95035.388267] Broke affinity for irq 280 | |
[95035.389349] smpboot: CPU 3 is now offline | |
[95035.407396] ACPI: Low-level resume complete | |
[95035.407517] ACPI : EC: EC started | |
[95035.407517] PM: Restoring platform NVS memory | |
[95035.408267] Suspended for 9.764 seconds | |
[95035.408307] Enabling non-boot CPUs ... | |
[95035.417524] x86: Booting SMP configuration: | |
[95035.417525] smpboot: Booting Node 0 Processor 1 APIC 0x2 | |
[95035.418124] cache: parent cpu1 should not be sleeping | |
[95035.418340] CPU1 is up | |
[95035.433605] smpboot: Booting Node 0 Processor 2 APIC 0x1 | |
[95035.434959] cache: parent cpu2 should not be sleeping | |
[95035.435442] CPU2 is up | |
[95035.449723] smpboot: Booting Node 0 Processor 3 APIC 0x3 | |
[95035.451074] cache: parent cpu3 should not be sleeping | |
[95035.451627] CPU3 is up | |
[95035.460866] ACPI: Waking up from system sleep state S3 | |
[95035.470170] ACPI : EC: interrupt unblocked | |
[95035.509483] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI | |
[95035.509620] PM: noirq resume of devices complete after 39.673 msecs | |
[95035.527902] PM: early resume of devices complete after 18.199 msecs | |
[95035.528123] ACPI : EC: event unblocked | |
[95035.528868] sd 2:0:0:0: [sda] Starting disk | |
[95035.532660] rtc_cmos 00:04: System wakeup disabled by ACPI | |
[95035.753858] usb 1-7: reset full-speed USB device number 3 using xhci_hcd | |
[95035.841827] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
[95035.845717] ata3.00: configured for UDMA/133 | |
[95035.998067] [drm] GuC firmware load skipped | |
[95036.013693] usb 1-6: reset high-speed USB device number 2 using xhci_hcd | |
[95036.238237] PM: resume of devices complete after 710.334 msecs | |
[95036.238361] usb 1-7:1.0: rebind failed: -517 | |
[95036.238365] usb 1-7:1.1: rebind failed: -517 | |
[95036.238963] PM: Finishing wakeup. | |
[95036.238967] Restarting tasks ... done. | |
[95036.245925] Bluetooth: hci0: Bootloader revision 0.0 build 2 week 52 2014 | |
[95036.248546] thermal thermal_zone6: failed to read out thermal zone (-5) | |
[95036.250479] Bluetooth: hci0: Device revision is 5 | |
[95036.250480] Bluetooth: hci0: Secure boot is enabled | |
[95036.250481] Bluetooth: hci0: OTP lock is enabled | |
[95036.250482] Bluetooth: hci0: API lock is enabled | |
[95036.250482] Bluetooth: hci0: Debug lock is disabled | |
[95036.250484] Bluetooth: hci0: Minimum firmware build 1 week 10 2014 | |
[95036.256787] [drm] RC6 on | |
[95037.153538] Bluetooth: hci0: Found device firmware: intel/ibt-11-5.sfi | |
[95037.270522] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[95037.272645] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled | |
[95037.273311] iwlwifi 0000:01:00.0: L1 Disabled - LTR Enabled | |
[95037.281784] Bluetooth: hci0: Failed to send firmware data (-38) | |
[95037.410519] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled | |
[95037.411044] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled | |
[95037.509067] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[95037.520188] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled | |
[95037.521572] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled | |
[95037.659666] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled | |
[95037.660189] iwlwifi 0000:01:00.0: L1 Enabled - LTR Enabled | |
[95037.761075] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[95037.864813] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[95040.817894] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready | |
[95040.881521] wlp1s0: authenticate with ec:08:6b:32:0a:53 | |
[95040.889871] wlp1s0: send auth to ec:08:6b:32:0a:53 (try 1/3) | |
[95040.901237] wlp1s0: authenticated | |
[95040.905219] wlp1s0: associate with ec:08:6b:32:0a:53 (try 1/3) | |
[95040.912416] wlp1s0: RX AssocResp from ec:08:6b:32:0a:53 (capab=0x11 status=0 aid=2) | |
[95040.914235] wlp1s0: associated | |
[95040.914287] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready | |
[95044.409410] usb 1-7: reset full-speed USB device number 3 using xhci_hcd | |
[95051.940588] systemd[1]: snapd.refresh.timer: Adding 2h 27min 34.759823s random time. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment