/etc/netatalk/AppleVolumes.default

AppleVolumes.default

# Netatalk 2.x afp volume cofiguration

#
# volume format:
# :DEFAULT: [all of the default options except volume name]
# path [name] [casefold:x] [options:z,l,j] \
#   [allow:a,@b,c,d] [deny:a,@b,c,d] [dbpath:path] [password:p] \
#   [rwlist:a,@b,c,d] [rolist:a,@b,c,d] [limitsize:value in bytes] \
#   [preexec:cmd] [root_preexec:cmd] [postexec:cmd]  [root_postexec:cmd] \
#   [allowed_hosts:IPv4 address[/IPv4 netmask bits]] \
#   [denied_hosts:IPv4 address[/IPv4 netmask bits]] \
#   ... more, see below ...
#   
# name:      volume name. it can't include the ':' character
#

#
# variable substitutions:
# you can use variables for both <path> and <name> now. here are the
# rules:
#     1) if you specify an unknown variable, it will not get converted. 
#     2) if you specify a known variable, but that variable doesn't have
#        a value, it will get ignored.
#
# the variables:
# $b   -> basename of path
# $c   -> client's ip or appletalk address
# $d   -> volume pathname on server    
# $f   -> full name (whatever's in the gecos field)
# $g   -> group
# $h   -> hostname 
# $i   -> client ip without tcp port or appletalk network   
# $s   -> server name (can be the hostname)
# $u   -> username (if guest, it's whatever user guest is running as)
# $v   -> volume name (either ADEID_NAME or basename of path)
# $z   -> zone (may not exist)
# $$   -> $
#

#
# casefold options [syntax: casefold:option]:
# tolower    -> lowercases names in both directions
# toupper    -> uppercases names in both directions
# xlatelower -> client sees lowercase, server sees uppercase
# xlateupper -> client sees uppercase, server sees lowercase
#
# allow/deny/rwlist/rolist format [syntax: allow:user1,@group]:
# user1,@group,user2  -> allows/denies access from listed users/groups
#                        rwlist/rolist control whether or not the
#                        volume is ro for those users.
# allowed_hosts       -> Only listed hosts and networks are allowed,
#                        all others are rejected. Example:
#                        allowed_hosts:10.1.0.0/16,10.2.1.100
# denied_hosts        -> Listed hosts and nets are rejected,
#                        all others are allowed. Example:
#                        denied_hosts: 192.168.100/24,10.1.1.1
# preexec             -> command to be run when the volume is mounted,
#                        ignore for user defined volumes
# root_preexec        -> command to be run as root when the volume is mounted,
#                        ignore for user defined volumes
# postexec            -> command to be run when the volume is closed,
#                        ignore for user defined volumes
# root_postexec       -> command to be run as root when the volume is closed,
#                        ignore for user defined volumes
# veto                -> hide files and directories,where the path matches
#                        one of the "/" delimited vetoed names. Matches are
#                        partial, e.g. path is /abc/def/file and veto:/abc/
#                        will hide the file.
# adouble             -> specify the format of the metadata files.
#                        default is "v2". netatalk 1.x used "v1".
#                        "osx" cannot be treated normally any longer.
# volsizelimit        -> size in MiB.  Useful for TimeMachine: limits the
#                         reported volume size, thus preventing TM from using
#                         the whole real disk space for backup.
#                         Example: "volsizelimit:1000" would limit the
#                         reported disk space to 1 GB.


#
# codepage options [syntax: options:charsetname]
# volcharset          -> specifies the charset to be used
#                        as the volume codepage
#                        e.g. "UTF8", "UTF8-MAC", "ISO-8859-15"
# maccharset          -> specifies the charset to be used
#                        as the legacy client (<=Mac OS 9) codepage
#                        e.g. "MAC_ROMAN", "MAC_CYRILLIC"
#
# perm                -> default permission value
#                        OR with the client requested perm
#                        Use with options:upriv
# dperm               -> default permission value for directories
#                        OR with the client requested perm
#                        Use with options:upriv
# fperm               -> default permission value for files
#                        OR with the client requested perm
#                        Use with options:upriv
# umask               -> set perm mask
#                        Use with options:upriv
# dbpath:path         -> store the database stuff in the following path.
# cnidserver:server[:port]
#                     -> Query this servername or IP address
#                        (default:localhost) and port (default: 4700)
#                        for CNIDs. Only used with CNID backend "dbd".
#                        This option here overrides any setting from
#                        afpd.conf:cnidserver.
# password:password   -> set a volume password (8 characters max)
# cnidscheme:scheme   -> set the cnid scheme for the volume,
#                        default is [dbd]
#                        available schemes: [dbd last tdb]
# ea                  -> none|auto|sys|ad
#                        Specify how Extended Attributes are stores. default
#                        is auto.
#                        auto: try "sys" (by setting an EA on the shared
#                              directory itself), fallback to "ad".  Requires
#                              writable volume for performing the test.
#                              Note: options:ro overwrites "auto" with "none."
#                        sys:  Use filesystem EAs
#                        ad:   Use files in AppleDouble directories
#                        none: No EA support
#

#
# miscellaneous options [syntax: options:option1,option2]:
# tm                  -> enable TimeMachine support
# prodos              -> make compatible with appleII clients.
# crlf                -> enable crlf translation for TEXT files.
# noadouble           -> don't create .AppleDouble unless a resource
#                        fork needs to be created.
# ro                  -> mount the volume as read-only.
# mswindows           -> enforce filename restrictions imposed by MS
#                        Windows. this will also invoke a default
#                        codepage (iso8859-1) if one isn't already 
#                        specified.
# nohex               -> don't do :hex translations for anything
#                        except dot files. specify usedots as well if
#                        you want that turned off. note: this option
#                         makes the / character illegal.
# usedots             -> don't do :hex translation for dot files. note: when 
#                        this option gets set, certain file names
#                        become illegal. these are .Parent and
#                        anything that starts with .Apple.
# invisibledots       -> don't do :hex translation for dot files. note: when 
#                        this option gets set, certain file names
#                        become illegal. these are .Parent and
#                        anything that starts with .Apple. also, dot
#                        files created on the unix side are marked invisible. 
# limitsize           -> limit disk size reporting to 2GB. this is
#                        here for older macintoshes using newer
#                        appleshare clients. yucko.
# nofileid            -> don't advertise createfileid, resolveid, deleteid 
#                        calls
# root_preexec_close  -> a non-zero return code from root_preexec close the 
#                        volume being mounted.
# preexec_close       -> a non-zero return code from preexec close the 
#                        volume being mounted.
# nostat              -> don't stat volume path when enumerating volumes list
# upriv               -> use unix privilege.  
# illegalseq          -> encode illegal sequence in filename asis,
#                        ex "\217-", which is not a valid SHIFT-JIS char,
#                        is encoded  as U\217 -
# nocnidcache         -> Don't store and read CNID to/from AppleDouble file.
#                        This should not be used as it also prevents a CNID
#                        database rebuild with `dbd`!
# caseinsensitive     -> The underlying FS is case insensitive (only 
#                        test with JFS in OS2 mode)
# dropbox             -> Allows a volume to be declared as being a "dropbox."
#                        Note that netatalk must be compiled with dropkludge
#                        support for this to function. Warning: This option
#                        is deprecated and might not work as expected.
# dropkludge          -> same as "dropbox"
# nodev               -> always use 0 for device number, helps when the
#                        device number is not constant across a reboot,
#                        cluster, ...
#

# The line below sets some DEFAULT, starting with Netatalk 2.1.
:DEFAULT: options:upriv,usedots

# By default all users have access to their home directories.
~/			"Home Directory"

/mnt/data/timecapsule/ "Raspi Time Machine" options:tm allow:mthierry
# End of File