kl25z-mbed-hid-test.py

#
#Simple example on how to send and receive data to the Mbed over USB (on Linux) using pyUSB 1.0
#
import os
import sys
 
import usb.core
import usb.util
 
from time import sleep
import random
 
# handler called when a report is received
def rx_handler(data):
    print 'recv: ', data
 
def findHIDDevice(mbed_vendor_id, mbed_product_id):
    # Find device
    hid_device = usb.core.find(idVendor=mbed_vendor_id,idProduct=mbed_product_id)
    
    if not hid_device:
        print "No device connected"
    else:
        sys.stdout.write('mbed found\n')
        if hid_device.is_kernel_driver_active(0):
            try:
                hid_device.detach_kernel_driver(0)
            except usb.core.USBError as e:
                sys.exit("Could not detatch kernel driver: %s" % str(e))
        try:
            hid_device.set_configuration()
            hid_device.reset()
        except usb.core.USBError as e:
            sys.exit("Could not set configuration: %s" % str(e))
        
        endpoint = hid_device[0][(0,0)][0]      
        
        while True:
            data = [0x0] * 16
                        
            #read the data
            bytes = hid_device.read(endpoint.bEndpointAddress, 8)
            rx_handler(bytes);
            
            for i in range(8):
                data[i] = bytes[i]
                data[i+8] = random.randint(0, 255)
 
            hid_device.write(1, data)
 
if __name__ == '__main__':
    # The vendor ID and product ID used in the Mbed program
    mbed_vendor_id = 0x1234 
    mbed_product_id = 0x0006
 
    # Search the Mbed, attach rx handler and send data
    findHIDDevice(mbed_vendor_id, mbed_product_id)