Skip to content

Instantly share code, notes, and snippets.

@mvaisakh

mvaisakh/Dmesg-4.14

Created May 6, 2020 11:44
Show Gist options
  • Save mvaisakh/25d69a8d46b42ea7584d56e83249330a to your computer and use it in GitHub Desktop.
Save mvaisakh/25d69a8d46b42ea7584d56e83249330a to your computer and use it in GitHub Desktop.
Download ZIP
Raw
Dmesg-4.14
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.156-ProjektEva+ (mvaisakh@ProjektEva) (Android (6443078 based on r383902) clang version 11.0.1 (https://android.googlesource.com/toolchain/llvm-project b397f81060ce6d701042b782172ed13bee898b79)) #2 SMP PREEMPT Wed May 6 15:26:36 +06 2020
[ 0.000000] Boot CPU: AArch64 Processor [51af8014]
[ 0.000000] memblock_reserve: 0x5a543 setup_arch+0xac/0x54c
[ 0.000000] Machine: Qualcomm Technologies, Inc. SDM 660 PM660 + PM660L QRD
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe800000, size 20 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fe000000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000009cc00000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node venus_fw_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fb400000, size 44 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000b6800000, size 152 MiB
[ 0.000000] OF: reserved mem: initialized node video_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5800000, size 92 MiB
[ 0.000000] OF: reserved mem: initialized node secure_region, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085600000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node wlan_msa_guard@85600000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085700000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node wlan_msa_mem@85700000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node removed_regions@85800000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086000000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node smem-mem@86000000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086200000, size 45 MiB
[ 0.000000] OF: reserved mem: initialized node removed_regions@86200000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008ac00000, size 126 MiB
[ 0.000000] OF: reserved mem: initialized node modem_fw_region@8ac00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000092a00000, size 30 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_fw_region@92a00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000094800000, size 2 MiB
[ 0.000000] OF: reserved mem: initialized node pil_mba_region@94800000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000094a00000, size 6 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_fw_region@94a00000, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000009ff00000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node ramoops, compatible id removed-dma-pool
[ 0.000000] On node 0 totalpages: 1505984
[ 0.000000] DMA zone: 7304 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 467456 pages, LIFO batch:31
[ 0.000000] Normal zone: 16227 pages used for memmap
[ 0.000000] Normal zone: 1038528 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] Did not receive the expected number of bytes from PRNG: 0
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x4a8 with crng_init=0
[ 0.000000] percpu: Embedded 22 pages/cpu s50072 r8192 d31848 u90112
[ 0.000000] pcpu-alloc: s50072 r8192 d31848 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: enabling workaround for Kryo2xx Silver erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1482453
[ 0.000000] Kernel command line: rcupdate.rcu_expedited=1 console=ttyMSM0,115200,n8 androidboot.console=ttyMSM0 earlycon=msm_serial_dm,0xc170000 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 sched_enable_hmp=1 sched_enable_power_aware=1 service_locator.enable=1 loop.max_part=7 androidboot.selinux=permissive buildvariant=eng root=/dev/dm-0 dm="system none ro,0 1 android-verity /dev/mmcblk0p13" androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.veritymode=enforcing androidboot.bootdevice=c0c4000.sdhci androidboot.serialno=K2AAGF005096ATH androidboot.fuse_status=1 androidboot.enable_adb_byfb=0 androidboot.enable_camera_hal3=0 androidboot.board_id_st=ww androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_hx83112a_1080p_video_tm:config0:1:none:cfg:single_dsi
[ 0.000000] device-mapper: init: will configure 1 devices
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 125044(95%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] software IO TLB: mapped [mem 0xf1800000-0xf5800000] (64MB)
[ 0.000000] Memory: 5427180K/6023936K available (17918K kernel code, 3026K rwdata, 7368K rodata, 6144K init, 10834K bss, 264980K reserved, 331776K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000]
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
[ 0.000000] ** **
[ 0.000000] ** This means that this is a DEBUG kernel and it is **
[ 0.000000] ** unsafe for production use. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your vendor! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] \x09RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] \x09All grace periods are expedited (rcu_expedited).
[ 0.000000] \x09Tasks RCU enabled.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017b00000
[ 0.000000] \x09Offload RCU callbacks from CPUs: .
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000015] clocksource: Switched to clocksource arch_sys_counter
[ 0.001426] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001435] pid_max: default: 32768 minimum: 301
[ 0.001550] Security Framework initialized
[ 0.001558] SELinux: Initializing.
[ 0.001619] SELinux: Starting in permissive mode
[ 0.001674] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.001698] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.013847] ASID allocator initialised with 32768 entries
[ 0.015961] Hierarchical SRCU implementation.
[ 0.021438] MSM Memory Dump base table set up
[ 0.021463] MSM Memory Dump apps data table set up
[ 0.023991] smp: Bringing up secondary CPUs ...
[ 0.034220] GICv3: CPU1: found redistributor 1 region 0:0x0000000017b20000
[ 0.034282] CPU1: Booted secondary processor [51af8014]
[ 0.044458] GICv3: CPU2: found redistributor 2 region 0:0x0000000017b40000
[ 0.044502] CPU2: Booted secondary processor [51af8014]
[ 0.054592] GICv3: CPU3: found redistributor 3 region 0:0x0000000017b60000
[ 0.054636] CPU3: Booted secondary processor [51af8014]
[ 0.065164] CPU features: enabling workaround for ARM erratum 858921
[ 0.065181] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.065243] CPU features: Unsupported CPU feature variation detected.
[ 0.065305] GICv3: CPU4: found redistributor 100 region 0:0x0000000017b80000
[ 0.065360] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.065410] arch_timer: CPU4: Trapping CNTVCT access
[ 0.065449] CPU4: Booted secondary processor [51af8002]
[ 0.076054] GICv3: CPU5: found redistributor 101 region 0:0x0000000017ba0000
[ 0.076086] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.076102] arch_timer: CPU5: Trapping CNTVCT access
[ 0.076112] CPU5: Booted secondary processor [51af8002]
[ 0.086621] GICv3: CPU6: found redistributor 102 region 0:0x0000000017bc0000
[ 0.086678] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.086723] arch_timer: CPU6: Trapping CNTVCT access
[ 0.086760] CPU6: Booted secondary processor [51af8002]
[ 0.097337] GICv3: CPU7: found redistributor 103 region 0:0x0000000017be0000
[ 0.097370] arch_timer: Enabling local workaround for ARM erratum 858921
[ 0.097386] arch_timer: CPU7: Trapping CNTVCT access
[ 0.097395] CPU7: Booted secondary processor [51af8002]
[ 0.097585] smp: Brought up 1 node, 8 CPUs
[ 0.097634] SMP: Total of 8 processors activated.
[ 0.097639] CPU features: detected: GIC system register CPU interface
[ 0.097644] CPU features: detected: 32-bit EL0 Support
[ 0.154281] CPU: All CPU(s) started at EL1
[ 0.154336] alternatives: patching kernel code
[ 0.195510] Registered cp15_barrier emulation handler
[ 0.195532] Registered setend emulation handler
[ 0.195889] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.195905] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.203358] pinctrl core: initialized pinctrl subsystem
[ 0.203976] NET: Registered protocol family 16
[ 0.205580] schedtune: configured to support 6 boost groups
[ 0.205764] ramoops: using module parameters
[ 0.205879] persistent_ram: no valid data in buffer (sig = 0x00380001)
[ 0.205893] persistent_ram: found existing empty buffer
[ 0.205914] persistent_ram: found existing empty buffer
[ 0.205920] persistent_ram: found existing empty buffer
[ 0.205928] persistent_ram: no valid data in buffer (sig = 0x00000000)
[ 0.205935] persistent_ram: no valid data in buffer (sig = 0x00000000)
[ 0.205943] persistent_ram: no valid data in buffer (sig = 0x00000000)
[ 0.205954] persistent_ram: no valid data in buffer (sig = 0x00000000)
[ 0.205961] persistent_ram: no valid data in buffer (sig = 0x00000000)
[ 0.205968] persistent_ram: no valid data in buffer (sig = 0x00000000)
[ 0.205978] persistent_ram: no valid data in buffer (sig = 0x00000000)
[ 0.206031] pstore: using zlib compression
[ 0.206106] pstore: Registered ramoops as persistent store backend
[ 0.206114] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0
[ 0.206730] cpuidle: using governor menu
[ 0.206765] cpuidle: using governor qcom
[ 0.206935] NET: Registered protocol family 42
[ 0.211780] vdso: 2 pages (1 code @ (ptrval), 1 data @ (ptrval))
[ 0.211792] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.212877] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.213886] exit: IPA_USB init success!
[ 0.214139] ramoops 9ff00000.ramoops: using Device Tree
[ 0.214148] ramoops: already initialized
[ 0.223474] unable to find DT imem DLOAD mode node
[ 0.224815] unable to find DT imem EDLOAD mode node
[ 0.226794] spmi spmi-0: PMIC arbiter version v3 (0x30000000)
[ 0.226986] msm_watchdog 17817000.qcom,wdt: wdog absent resource not present
[ 0.231171] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
[ 0.232146] msm_watchdog 17817000.qcom,wdt: MSM Watchdog Initialized
[ 0.232408] sps:sps is ready.
[ 0.234551] gpu-sdm660 5065000.clock-controller: Registered GPU RBCPR clocks
[ 0.237640] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
[ 0.238194] platform soc:smem: assigned reserved memory node smem-mem@86000000
[ 0.238737] qcom_glink_rpm soc:rpm-glink: failed to register early notif -22
[ 0.239924] platform cce0000.qcom,venus: assigned reserved memory node venus_fw_region
[ 0.240608] qcom_smd_rpm_probe: RPM-SMD running version 0
[ 0.241545] platform 15700000.qcom,lpass: assigned reserved memory node adsp_fw_region@92a00000
[ 0.241846] platform 1a300000.qcom,turing: assigned reserved memory node cdsp_fw_region@94a00000
[ 0.242225] platform 4080000.qcom,mss: assigned reserved memory node modem_fw_region@8ac00000
[ 0.246855] gfx_mem_acc_corner: Bringing 0uV into 1-1uV
[ 0.247212] msm_gfx_ldo: Bringing 0uV into 400000-400000uV
[ 0.256992] sdm660-pinctrl 3000000.pinctrl: invalid resource
[ 0.283439] gdsc_vfe0: supplied by gdsc_camss_top
[ 0.283736] gdsc_vfe1: supplied by gdsc_camss_top
[ 0.284048] gdsc_cpp: supplied by gdsc_camss_top
[ 0.286201] KPI: Bootloader start count = 78460
[ 0.286210] KPI: Bootloader end count = 448675
[ 0.286216] KPI: Bootloader display count = 2431
[ 0.286222] KPI: Bootloader load kernel count = 4252925886
[ 0.286231] KPI: Kernel MPM timestamp = 467640
[ 0.286236] KPI: Kernel MPM Clock frequency = 32768
[ 0.286256] socinfo_print: v0.11, id=317, ver=1.0, raw_id=140, raw_ver=0, hw_plat=11, hw_plat_ver=65536\x0a accessory_chip=0, hw_plat_subtype=0, pmic_model=65563, pmic_die_revision=131072 foundry_id=3 serial_number=4141193005 num_pmics=2
[ 0.286309] Minidump: Enabled with max number of regions 200
[ 0.287848] Unable to find DT property: qcom,msm-imem-minidump-debug
[ 0.288984] cam_vadd_gpio_regulator: regulator get failed, ret=-517
[ 0.289209] cam_vaf_gpio_regulator: regulator get failed, ret=-517
[ 0.289503] cam_f_avdd_gpio_regulator: regulator get failed, ret=-517
[ 0.290894] arm-smmu 16c0000.arm,smmu-anoc2: Couldn't get clock: smmu_aggr2_noc_clk
[ 0.291145] arm-smmu 5100000.arm,smmu-lpass_q6: Couldn't get clock: lpass_q6_smmu_clk
[ 0.291465] arm-smmu cd00000.arm,smmu-mmss: Couldn't get clock: mmss_mnoc_ahb_clk
[ 0.291601] arm-smmu 5040000.arm,smmu-kgsl: Couldn't get clock: gcc_gpu_cfg_ahb_clk
[ 0.291832] arm-smmu 5180000.arm,smmu-turing_q6: Couldn't get clock: turing_q6_smmu_clk
[ 0.292204] vgaarb: loaded
[ 0.292343] qcom,qpnp-misc 800f000.qcom,spmi:qcom,pm660@0:qcom,misc@900: probe successful
[ 0.292969] SCSI subsystem initialized
[ 0.293114] usbcore: registered new interface driver usbfs
[ 0.293150] usbcore: registered new interface driver hub
[ 0.293336] usbcore: registered new device driver usb
[ 0.293627] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not found, using dummy regulator
[ 0.293985] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 0.294016] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM Controlled Shutdown)
[ 0.294247] input: qpnp_pon as /devices/platform/soc/800f000.qcom,spmi/spmi-0/spmi0-00/800f000.qcom,spmi:qcom,pm660@0:qcom,power-on@800/input/input0
[ 0.294893] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660l@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold' boot
[ 0.294923] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm660l@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP1 (Keypad_Reset1)
[ 0.295324] media: Linux media interface: v0.10
[ 0.295354] Linux video capture interface: v2.00
[ 0.304467] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
[ 0.304603] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
[ 0.304735] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
[ 0.304964] platform soc:qcom,ion:qcom,ion-heap@12: assigned reserved memory node video_region
[ 0.305140] ION heap system created
[ 0.305275] ION heap adsp created at 0x00000000fe000000 with size 800000
[ 0.305286] ION heap qsecom created at 0x00000000fe800000 with size 1400000
[ 0.305294] ION heap secure_display created at 0x00000000f5800000 with size 5c00000
[ 0.305302] ION heap secure_heap created
[ 0.305317] ION heap video created at 0x00000000b6800000 with size 9800000
[ 0.306460] PMIC@SID0: PM660 v2.0 options: 0, 0, 0, 0
[ 0.306593] PMIC@SID2: PM660L v2.0.1 options: 0, 0, 0, 0
[ 0.307184] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.307190] ipa ipa_plat_drv_probe:4990 fail to register with bus mgr!
[ 0.308370] Advanced Linux Sound Architecture Driver Initialized.
[ 0.308714] Bluetooth: Core ver 2.22
[ 0.308742] NET: Registered protocol family 31
[ 0.308749] Bluetooth: HCI device and connection manager initialized
[ 0.308760] Bluetooth: HCI socket layer initialized
[ 0.308767] Bluetooth: L2CAP socket layer initialized
[ 0.308792] Bluetooth: SCO socket layer initialized
[ 0.309179] NetLabel: Initializing
[ 0.309187] NetLabel: domain hash size = 128
[ 0.309194] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.309248] NetLabel: unlabeled traffic allowed by default
[ 0.309320] pcie:pcie_init.
[ 0.312675] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully registered! lcdb_en=1 ldo_voltage=5500mV ncp_voltage=5500mV bst_voltage=5600mV
[ 0.312803] qpnp_labibb_regulator_probe: qpnp_labibb: unknown peripheral type 81
[ 0.312821] qcom,qpnp-labibb-regulator: probe of 800f000.qcom,spmi:qcom,pm660l@3:qpnp-labibb-regulator failed with error -22
[ 0.317800] qcom-clk-smd-rpm soc:qcom,rpmcc: Registered RPM clocks
[ 0.318870] pm660_s4: Bringing 1uV into 1805000-1805000uV
[ 0.319369] pm660_s5: Bringing 1uV into 1224000-1224000uV
[ 0.319834] pm660_s6: Bringing 1uV into 504000-504000uV
[ 0.320409] pm660_l1: Bringing 1uV into 1150000-1150000uV
[ 0.320870] pm660_l2: Bringing 1uV into 950000-950000uV
[ 0.321352] pm660_l3: Bringing 1uV into 950000-950000uV
[ 0.321810] pm660_l5: Bringing 1uV into 525000-525000uV
[ 0.322299] pm660_l6: Bringing 1uV into 1200000-1200000uV
[ 0.322697] rpm_vreg_device_probe: pm660_l6_pin_ctrl: regulator type=0 does not support device tree property: qcom,init-pin-ctrl-mode
[ 0.322721] pm660_l6_pin_ctrl: Bringing 1uV into 1200000-1200000uV
[ 0.323189] pm660_l7: Bringing 1uV into 1200000-1200000uV
[ 0.323665] pm660_l8: Bringing 1uV into 1750000-1750000uV
[ 0.324131] pm660_l9: Bringing 1uV into 1750000-1750000uV
[ 0.324531] rpm_vreg_device_probe: pm660_l9_pin_ctrl: regulator type=0 does not support device tree property: qcom,init-pin-ctrl-mode
[ 0.324555] pm660_l9_pin_ctrl: Bringing 1uV into 1750000-1750000uV
[ 0.325024] pm660_l10: Bringing 1uV into 1780000-1780000uV
[ 0.325814] pm660_l11: Bringing 1uV into 1780000-1780000uV
[ 0.326306] pm660_l12: Bringing 1uV into 1780000-1780000uV
[ 0.326788] pm660_l13: Bringing 1uV into 1780000-1780000uV
[ 0.327284] pm660_l14: Bringing 1uV into 1710000-1710000uV
[ 0.327763] pm660_l15: Bringing 1uV into 1650000-1650000uV
[ 0.328230] pm660_l17: Bringing 1uV into 1650000-1650000uV
[ 0.328722] pm660_l19: Bringing 1uV into 3200000-3200000uV
[ 0.329116] rpm_vreg_device_probe: pm660_l19_pin_ctrl: regulator type=0 does not support device tree property: qcom,init-pin-ctrl-mode
[ 0.329140] pm660_l19_pin_ctrl: Bringing 1uV into 3200000-3200000uV
[ 0.329642] pm660l_s1: Bringing 1uV into 1125000-1125000uV
[ 0.330159] pm660l_s2: Bringing 1uV into 1050000-1050000uV
[ 0.330665] pm660l_s3_level: Bringing 1uV into 16-16uV
[ 0.331100] pm660l_s3_floor_level: Bringing 1uV into 16-16uV
[ 0.331626] pm660l_s3_level_ao: Bringing 1uV into 16-16uV
[ 0.332271] pm660l_s5_level: Bringing 1uV into 16-16uV
[ 0.332690] pm660l_s5_floor_level: Bringing 1uV into 16-16uV
[ 0.333219] pm660l_s5_level_ao: Bringing 1uV into 16-16uV
[ 0.333720] pm660l_l1: Bringing 1uV into 800000-800000uV
[ 0.334231] pm660l_l2: Bringing 1uV into 350000-350000uV
[ 0.334752] pm660l_l3: Bringing 1uV into 1710000-1710000uV
[ 0.335674] pm660l_l4: Bringing 1uV into 1700000-1700000uV
[ 0.336192] pm660l_l5: Bringing 1uV into 1721000-1721000uV
[ 0.336695] pm660l_l6: Bringing 1uV into 1700000-1700000uV
[ 0.337997] pm660l_l8: Bringing 1uV into 2800000-2800000uV
[ 0.338524] pm660l_l9_level: Bringing 1uV into 16-16uV
[ 0.338968] pm660l_l9_floor_level: Bringing 1uV into 16-16uV
[ 0.339903] pm660l_l10_level: Bringing 1uV into 16-16uV
[ 0.340419] pm660l_l10_floor_level: Bringing 1uV into 16-16uV
[ 0.341067] pm660l_bob: Bringing 1uV into 3300000-3300000uV
[ 0.341522] pm660l_bob_pin1: Bringing 1uV into 3300000-3300000uV
[ 0.341739] cam_vadd_gpio_regulator: supplied by pm660l_bob
[ 0.341792] cam_vaf_gpio_regulator: supplied by pm660l_bob
[ 0.341843] cam_f_avdd_gpio_regulator: supplied by pm660l_bob
[ 0.342082] pm660l_bob_pin2: Bringing 1uV into 3300000-3300000uV
[ 0.342484] pm660l_bob_pin3: Bringing 1uV into 3300000-3300000uV
[ 0.343014] cpr4_sdm660_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 0
[ 0.343200] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 585000 uV
[ 0.343208] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 645000 uV
[ 0.343215] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 725000 uV
[ 0.343222] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 790000 uV
[ 0.343229] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[4] open-loop= 870000 uV
[ 0.343236] cpr4_sdm660_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[5] open-loop= 925000 uV
[ 0.343391] cpr3_regulator_init_ctrl: gfx: Default CPR mode = open-loop
[ 0.345325] arm-smmu 16c0000.arm,smmu-anoc2: \x09non-coherent table walk
[ 0.345341] arm-smmu 16c0000.arm,smmu-anoc2: \x09(IDR0.CTTW overridden by FW configuration)
[ 0.345351] arm-smmu 16c0000.arm,smmu-anoc2: \x09stream matching with 6 register groups
[ 0.349064] arm-smmu 5100000.arm,smmu-lpass_q6: Couldn't get clock: lpass_q6_smmu_clk
[ 0.349458] arm-smmu cd00000.arm,smmu-mmss: Couldn't get clock: mmss_mnoc_ahb_clk
[ 0.349652] arm-smmu 5040000.arm,smmu-kgsl: Couldn't get clock: gcc_gpu_cfg_ahb_clk
[ 0.349946] arm-smmu 5180000.arm,smmu-turing_q6: Couldn't get clock: turing_q6_smmu_clk
[ 0.350208] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.350214] ipa ipa_plat_drv_probe:4990 fail to register with bus mgr!
[ 0.367650] Registered GCC clocks
[ 0.420905] mmcc-sdm660 c8c0000.clock-controller: Registered MMSS clocks
[ 0.422884] gpucc_gfx3d_clk: set OPP pair(19200000 Hz: 1 uV) on 5000000.qcom,kgsl-3d0
[ 0.423423] gpucc_gfx3d_clk: set OPP pair(647000000 Hz: 6 uV) on 5000000.qcom,kgsl-3d0
[ 0.423586] gpucc_gfx3d_clk: set OPP pair(750000000 Hz: 7 uV) on 5000000.qcom,kgsl-3d0
[ 0.424488] gpucc-sdm660 5065000.gfx: Registered GPUCC clocks
[ 0.425618] cprh_kbss_read_fuse_data: apc0_pwrcl_corner: speed bin = 4
[ 0.425637] cprh_sdm660_kbss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 2
[ 0.425672] cprh_sdm660_kbss_read_fuse_data: apc0_pwrcl_corner: invalid CPR fuse combo = 34 found
[ 0.425687] cprh_kbss_read_fuse_data: apc0_pwrcl_corner: sdm660 kbss fuse data read failed, rc=-22
[ 0.425701] cprh_kbss_init_regulator: apc0_pwrcl_corner: unable to read CPR fuse data, rc=-22
[ 0.425713] cprh_kbss_regulator_probe: apc0_pwrcl_corner: regulator initialization failed, rc=-22
[ 0.425752] qcom,cprh-kbss-regulator: probe of 179c8000.cprh-ctrl failed with error -22
[ 0.426117] cprh_kbss_read_fuse_data: apc1_perfcl_corner: speed bin = 4
[ 0.426133] cprh_sdm660_kbss_read_fuse_data: apc1_perfcl_corner: CPR fusing revision = 2
[ 0.426169] cprh_sdm660_kbss_read_fuse_data: apc1_perfcl_corner: invalid CPR fuse combo = 34 found
[ 0.426182] cprh_kbss_read_fuse_data: apc1_perfcl_corner: sdm660 kbss fuse data read failed, rc=-22
[ 0.426195] cprh_kbss_init_regulator: apc1_perfcl_corner: unable to read CPR fuse data, rc=-22
[ 0.426208] cprh_kbss_regulator_probe: apc1_perfcl_corner: regulator initialization failed, rc=-22
[ 0.426241] qcom,cprh-kbss-regulator: probe of 179c4000.cprh-ctrl failed with error -22
[ 0.427713] gdsc_gpu_gx: supplied by gfx_corner
[ 0.429107] arm-smmu 5100000.arm,smmu-lpass_q6: \x09non-coherent table walk
[ 0.429130] arm-smmu 5100000.arm,smmu-lpass_q6: \x09(IDR0.CTTW overridden by FW configuration)
[ 0.429152] arm-smmu 5100000.arm,smmu-lpass_q6: \x09stream matching with 13 register groups
[ 0.432160] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.432177] arm-smmu cd00000.arm,smmu-mmss: Bus client registration failed
[ 0.432853] arm-smmu 5040000.arm,smmu-kgsl: \x09non-coherent table walk
[ 0.432876] arm-smmu 5040000.arm,smmu-kgsl: \x09(IDR0.CTTW overridden by FW configuration)
[ 0.432898] arm-smmu 5040000.arm,smmu-kgsl: \x09stream matching with 3 register groups
[ 0.434431] arm-smmu 5180000.arm,smmu-turing_q6: \x09non-coherent table walk
[ 0.434454] arm-smmu 5180000.arm,smmu-turing_q6: \x09(IDR0.CTTW overridden by FW configuration)
[ 0.434477] arm-smmu 5180000.arm,smmu-turing_q6: \x09stream matching with 11 register groups
[ 0.436878] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.436889] ipa ipa_plat_drv_probe:4990 fail to register with bus mgr!
[ 0.438832] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
[ 0.438848] arm-smmu cd00000.arm,smmu-mmss: Bus client registration failed
[ 0.440727] clocksource: Switched to clocksource arch_sys_counter
[ 0.556879] VFS: Disk quotas dquot_6.6.0
[ 0.556993] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.560562] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.560586] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[ 0.560903] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.560932] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.560955] mdss_pll c994400.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.564710] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=0 clocks successfully
[ 0.564880] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[ 0.564899] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[ 0.565169] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.565195] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.565219] mdss_pll c996400.qcom,mdss_dsi_pll: Failed to create debugfs directory
[ 0.568672] dsi_pll_clock_register_14nm: Registered DSI PLL ndx=1 clocks successfully
[ 0.568788] mdss_pll_probe: MDSS pll label = MDSS DP PLL
[ 0.570176] msm_bus_fabric_init_driver
[ 0.591117] msm_bus_dev_init_qos: Skipping QOS init for 1
[ 0.591209] msm_bus_dev_init_qos: Skipping QOS init for 727
[ 0.591226] msm_bus_dev_init_qos: Skipping QOS init for 728
[ 0.591368] msm_bus_device 1620000.ad-hoc-bus: Bus scaling driver probe successful
[ 0.604015] NET: Registered protocol family 2
[ 0.605346] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.606408] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.608472] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.608929] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.609148] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.609828] NET: Registered protocol family 1
[ 0.609906] PCI: CLS 0 bytes, default 128
[ 0.612070] IPA smmu_info.s1_bypass=1 smmu_info.fast_map=0
[ 0.612575] iommu: Adding device 14780000.qcom,ipa:ipa_smmu_ap to group 0
[ 0.614265] ipa ipa2_uc_state_check:295 uC interface not initialized
[ 0.614312] ipa ipa_sps_irq_control_all:963 EP (2) not allocated.
[ 0.614334] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
[ 0.617303] sps:BAM 0x0000000014784000 is registered.
[ 0.618905] sps:BAM 0x0000000014784000 (va:0x (ptrval)) enabled: ver:0x27, number of pipes:20
[ 0.634510] IPA driver initialization was successful.
[ 0.635179] iommu: Adding device 14780000.qcom,ipa:ipa_smmu_uc to group 1
[ 0.639047] arm-smmu cd00000.arm,smmu-mmss: \x09non-coherent table walk
[ 0.639071] arm-smmu cd00000.arm,smmu-mmss: \x09(IDR0.CTTW overridden by FW configuration)
[ 0.639094] arm-smmu cd00000.arm,smmu-mmss: \x09stream matching with 52 register groups
[ 0.643851] Trying to unpack rootfs image as initramfs...
[ 0.732234] Freeing initrd memory: 772K
[ 0.736862] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.747174] audit: initializing netlink subsys (disabled)
[ 0.747527] audit: type=2000 audit(0.739:1): state=initialized audit_enabled=0 res=1
[ 0.748058] Initialise system trusted keyrings
[ 0.748333] workingset: timestamp_bits=45 max_order=21 bucket_order=0
[ 0.757691] Registering sdcardfs 0.1
[ 0.758132] fuse init (API version 7.26)
[ 0.758520] SELinux: Registering netfilter hooks
[ 0.759351] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
[ 0.759369] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
[ 0.759387] pfk [pfk_init]: Driver initialized successfully
[ 0.767710] Key type asymmetric registered
[ 0.767729] Asymmetric key parser 'x509' registered
[ 0.767827] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 0.767845] io scheduler noop registered
[ 0.767858] io scheduler deadline registered
[ 0.768046] io scheduler cfq registered (default)
[ 0.768061] io scheduler mq-deadline registered
[ 0.768073] io scheduler kyber registered
[ 0.788689] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found
[ 0.788740] mdss_mdp_probe+0x2a4/0x1408->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed
[ 0.789144] mdss_mdp_irq_clk_setup: unable to get core gdsc regulator
[ 0.789357] mdss_mdp_irq_clk_register: unable to get clk: bimc_clk
[ 0.791450] No change in context(0==0), skip
[ 0.792504] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
[ 0.792525] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
[ 0.792611] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:0 ndx:0x40 prio:2
[ 0.792634] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:1 ndx:0x40 prio:2
[ 0.792651] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:0 ndx:0x80 prio:3
[ 0.792673] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:1 ndx:0x80 prio:3
[ 0.792689] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:0 ndx:0x1000 prio:4
[ 0.792713] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:1 ndx:0x1000 prio:4
[ 0.792763] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:2 num:10 rect:0 ndx:0x400 prio:0
[ 0.792801] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[ 0.793163] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[ 0.793190] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
[ 0.794125] xlog_status: enable:1, panic:1, dump:2
[ 0.795644] mdss_mdp_probe: mdss version = 0x30020000, bootloader display is on, num 1, intf_sel=0x00000100
[ 0.798957] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 2
[ 0.799423] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[ 0.799672] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 3
[ 0.800194] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[ 0.804121] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 0.804569] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_hx83112a_1080p_video_tm:config0:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_hx83112a_1080p_video_tm
[ 0.804631] mdss_dsi_panel_init: Panel Name = hx83112a 1080p video mode dsi tm panel
[ 0.804983] mdss_dsi_parse_split_link_settings: enable 0 sublinks-count 0 lanes per sublink 0
[ 0.805112] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_hx83112a_1080p_video_tm" ( (ptrval))
[ 0.805167] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[ 0.805192] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[ 0.805205] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:config0
[ 0.805589] mdss_dsi_parse_panel_features: ulps feature disabled
[ 0.805611] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
[ 0.805631] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[ 0.805843] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
[ 0.805868] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
[ 0.805933] mdss_dsi_set_refresh_rate_range:2315, Unable to read min refresh rate
[ 0.805957] mdss_dsi_set_refresh_rate_range:2330, Unable to read max refresh rate
[ 0.805969] dyn_fps: min = 60, max = 60
[ 0.806451] mdss_dsi_parse_ctrl_params:4506 Unable to read qcom,display-id, data= (ptrval),len=20
[ 0.806498] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[ 0.806518] mdss_dsi_parse_gpio_params: avdd_en gpio not specified
[ 0.806634] msm_mdss_get_res_byname: 'dsi_phy_regulator' resource not found
[ 0.806674] mdss_dsi_retrieve_ctrl_resources+0x194/0x1f8->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_mdss_get_res_byname failed
[ 0.806692] mdss_dsi_retrieve_ctrl_resources: ctrl_base= (ptrval) ctrl_size=400 phy_base= (ptrval) phy_size=588
[ 0.806906] dsi_panel_device_register: Continuous splash enabled
[ 0.807187] Unable to find fb node for device: c994000.qcom,mdss_dsi_ctrl0
[ 0.807599] mdss_register_panel: adding framebuffer device c994000.qcom,mdss_dsi_ctrl0
[ 0.809183] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x20010000, PHY rev:0x2
[ 0.809307] mdss_dsi_status_init: DSI status check interval:2000
[ 0.811777] mdss_dp_usbpd_setup: get_usbpd phandle failed (-11)
[ 0.811793] mdss_dp_probe: Error usbpd setup!
[ 0.813286] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
[ 0.814885] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
[ 0.816045] mdss_fb_register: FrameBuffer[0] 1080x2280 registered successfully!
[ 0.816675] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
[ 0.816840] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
[ 0.816996] mdss_mdp_splash_parse_dt: splash mem child node is not present
[ 0.820203] qcom-sps-dma c144000.qcom,sps-dma: dma_async_device_register: device has no channels!
[ 0.820346] qcom-sps-dma c184000.qcom,sps-dma: dma_async_device_register: device has no channels!
[ 0.824686] iommu: Adding device 18800000.qcom,icnss to group 4
[ 0.824785] icnss: Recursive recovery allowed for WLAN
[ 0.826463] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
[ 0.826842] icnss: Platform driver probed successfully
[ 0.839430] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
[ 0.839730] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
[ 0.839967] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
[ 0.842781] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
[ 0.842866] minidump-id not found for modem
[ 0.843201] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node pil_mba_region@94800000
[ 0.847356] minidump-id not found for venus
[ 0.847405] subsys-pil-tz cce0000.qcom,venus: for venus segments only will be dumped.
[ 0.847557] subsys-pil-tz cce0000.qcom,venus: for md_venus segments only will be dumped.
[ 0.848402] minidump-id not found for adsp
[ 0.848588] subsys-pil-tz 15700000.qcom,lpass: for adsp segments only will be dumped.
[ 0.848723] subsys-pil-tz 15700000.qcom,lpass: for md_adsp segments only will be dumped.
[ 0.849818] minidump-id not found for cdsp
[ 0.849982] subsys-pil-tz 1a300000.qcom,turing: for cdsp segments only will be dumped.
[ 0.850166] subsys-pil-tz 1a300000.qcom,turing: for md_cdsp segments only will be dumped.
[ 0.851291] minidump-id not found for a512_zap
[ 0.851326] subsys-pil-tz soc:qcom,kgsl-hyp: for a512_zap segments only will be dumped.
[ 0.851444] subsys-pil-tz soc:qcom,kgsl-hyp: for md_a512_zap segments only will be dumped.
[ 0.852411] spcom: spcom_init: spcom driver version 2.1 23-April-2018.
[ 0.862959] smp2p_sleepstate soc:qcom,smp2p_sleepstate: got smp2p-sleepstate-in irq 250
[ 0.867992] uart_tx_gpio is not available
[ 0.868010] uart_rx_gpio is not available
[ 0.868025] uart_cts_gpio is not available
[ 0.868040] uart_rfr_gpio is not available
[ 0.869109] sps: BAM device 0x000000000c184000 is not registered yet.
[ 0.869532] sps:BAM 0x000000000c184000 is registered.
[ 0.871935] c1af000.uart: ttyHS0 at MMIO 0xc1af000 (irq = 219, base_baud = 460800) is a MSM HS UART
[ 0.876860] random: fast init done
[ 0.877013] random: crng init done
[ 0.879601] diag: MUX: unable to register pcie operations for proc: 0, err: -22
[ 0.879623] diag: MUX: unable to register PCIe operations, continuing with USB registrations for proc: 0, err: -22
[ 0.888990] iommu: Adding device soc:iommu_test_device to group 5
[ 0.902655] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 6
[ 0.903226] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 7
[ 0.925030] brd: module loaded
[ 0.948178] loop: module loaded
[ 0.948754] zram: Added device: zram0
[ 0.951253] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
[ 0.951305] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[ 0.951326] QSEECOM: qseecom_probe: no-clock-support=0x1
[ 0.951347] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
[ 0.951435] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[ 0.957520] qce 1de0000.qcedev: QTI Crypto 5.3.4 device found @0x1de0000
[ 0.957992] sps:BAM 0x0000000001dc4000 is registered.
[ 0.958620] sps:BAM 0x0000000001dc4000 (va:0x000000008c793308) enabled: ver:0x27, number of pipes:16
[ 0.959345] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 112
[ 0.965712] qcrypto 1de0000.qcrypto: QTI Crypto 5.3.4 device found @0x1de0000
[ 0.966953] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 112
[ 0.968577] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
[ 0.968771] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
[ 0.968957] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
[ 0.969140] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
[ 0.969326] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
[ 0.969518] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
[ 0.969703] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
[ 0.969901] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
[ 0.970186] qcrypto 1de0000.qcrypto: qcrypto-sha1
[ 0.970376] qcrypto 1de0000.qcrypto: qcrypto-sha256
[ 0.970563] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[ 0.970748] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[ 0.970937] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[ 0.971130] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[ 0.971320] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[ 0.971512] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[ 0.971700] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
[ 0.971887] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
[ 0.972074] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
[ 0.972259] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
[ 0.975396] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[ 0.976331] SCSI Media Changer driver v0.25
[ 0.979196] sdm660-pinctrl 3000000.pinctrl: invalid group "gpio107" for function "blsp_spi7"
[ 0.979328] sdm660-pinctrl 3000000.pinctrl: invalid group "gpio107" for function "blsp_spi7"
[ 0.980162] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 0.983354] libphy: Fixed MDIO Bus: probed
[ 0.983373] tun: Universal TUN/TAP device driver, 1.6
[ 0.983491] sky2: driver version 1.30
[ 0.984489] PPP generic driver version 2.4.2
[ 0.984618] PPP BSD Compression module registered
[ 0.984631] PPP Deflate Compression module registered
[ 0.984683] PPP MPPE Compression module registered
[ 0.984697] NET: Registered protocol family 24
[ 0.984728] PPTP driver version 0.8.5
[ 0.985474] CLD80211: Initializing
[ 0.985700] usbcore: registered new interface driver r8152
[ 0.985774] usbcore: registered new interface driver asix
[ 0.985909] usbcore: registered new interface driver ax88179_178a
[ 0.985976] usbcore: registered new interface driver cdc_ether
[ 0.986034] usbcore: registered new interface driver net1080
[ 0.986090] usbcore: registered new interface driver cdc_subset
[ 0.986149] usbcore: registered new interface driver zaurus
[ 0.986555] i2c-msm-v2 c1b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 0.986615] nq-nci 6-0028: nfcc_hw_check: - i2c_master_send core reset Error
[ 0.986637] usbcore: registered new interface driver cdc_ncm
[ 0.994118] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 0.997987] msm-qusb-phy c012000.qusb: c012000.qusb supply USB3_GDSC not found, using dummy regulator
[ 0.999202] msm-qusb-phy c014000.qusb: c014000.qusb supply USB3_GDSC not found, using dummy regulator
[ 1.008701] dwc3 a800000.dwc3: changing max_speed on rev 00000000
[ 1.017078] i2c-msm-v2 c1b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:8) mode:FIFO slv_addr:0x28 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.017120] nq-nci 6-0028: nfcc_hw_check: - i2c_master_send get version cmd Error
[ 1.017126] nq-nci 6-0028: nfcc_hw_check: - NFCC HW not available
[ 1.017267] nq-nci 6-0028: nqx_probe: probing nqxx failed, check hardware
[ 1.020881] Invalid index Defaulting curr to 0
[ 1.027536] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.027562] ehci-pci: EHCI PCI platform driver
[ 1.027633] ehci-platform: EHCI generic platform driver
[ 1.029082] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.029129] ohci-pci: OHCI PCI platform driver
[ 1.029211] ohci-platform: OHCI generic platform driver
[ 1.033084] usbcore: registered new interface driver usb-storage
[ 1.033163] usbcore: registered new interface driver usb_ehset_test
[ 1.033225] usbcore: registered new interface driver lvs
[ 1.035127] usb_qcrndis_init: failed to register diag -17
[ 1.036794] [NVT-ts] nvt_driver_init 2126: start
[ 1.037064] [NVT-ts] nvt_ts_probe 1542: start
[ 1.037092] [NVT-ts] nvt_parse_dt 1081: novatek,irq-gpio=67
[ 1.050279] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.050478] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.050661] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.050838] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.051010] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.051059] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.100308] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.100487] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.100663] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.100835] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.101006] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.101054] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.130265] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.130443] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.130615] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.130787] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.130957] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.131005] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.150259] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.150435] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.150608] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.150780] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.150950] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.150997] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.151139] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.151310] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.151481] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.151652] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.151822] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.151869] [NVT-ts] CTP_I2C_READ 350: error, ret=-107
[ 1.151889] [NVT-ts] nvt_ts_check_chip_ver_trim 1478: buf[1]=0x00, buf[2]=0x00, buf[3]=0x00, buf[4]=0x00, buf[5]=0x00, buf[6]=0x00
[ 1.170259] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.170435] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.170608] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.170779] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.170949] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.170995] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.200266] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.200441] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.200616] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.200787] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.200958] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.201004] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.220255] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.220430] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.220602] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.220772] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.220942] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.220989] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.221127] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.221296] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.221467] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.221636] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.221805] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.221852] [NVT-ts] CTP_I2C_READ 350: error, ret=-107
[ 1.221871] [NVT-ts] nvt_ts_check_chip_ver_trim 1478: buf[1]=0x00, buf[2]=0x00, buf[3]=0x00, buf[4]=0x00, buf[5]=0x00, buf[6]=0x00
[ 1.240253] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.240429] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.240603] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.240774] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.240943] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.240990] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.270228] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.270403] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.270573] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.270743] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.270911] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.270958] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.290263] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.290438] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.290611] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.290780] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.290950] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.290997] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.291136] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.291307] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.291475] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.291646] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.291816] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.291862] [NVT-ts] CTP_I2C_READ 350: error, ret=-107
[ 1.291883] [NVT-ts] nvt_ts_check_chip_ver_trim 1478: buf[1]=0x00, buf[2]=0x00, buf[3]=0x00, buf[4]=0x00, buf[5]=0x00, buf[6]=0x00
[ 1.310260] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.310436] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.310610] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.310781] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.310951] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.310998] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.340263] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.340438] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.340609] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.340780] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.340950] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.340996] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.360254] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.360429] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.360600] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.360769] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.360939] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.360985] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.361123] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.361293] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.361463] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.361633] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.361802] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.361848] [NVT-ts] CTP_I2C_READ 350: error, ret=-107
[ 1.361867] [NVT-ts] nvt_ts_check_chip_ver_trim 1478: buf[1]=0x00, buf[2]=0x00, buf[3]=0x00, buf[4]=0x00, buf[5]=0x00, buf[6]=0x00
[ 1.380256] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.380433] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.380605] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.380777] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.380948] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.380995] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.410257] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.410431] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.410603] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.410776] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.410946] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x62 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.410993] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.430253] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.430428] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.430601] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.430773] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.430942] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000090
[ 1.430989] [NVT-ts] CTP_I2C_WRITE 382: error, ret=-107
[ 1.431127] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.431296] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.431465] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.431635] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.431804] i2c-msm-v2 c178000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:6 tx:1) mode:FIFO slv_addr:0x1 MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.431850] [NVT-ts] CTP_I2C_READ 350: error, ret=-107
[ 1.431870] [NVT-ts] nvt_ts_check_chip_ver_trim 1478: buf[1]=0x00, buf[2]=0x00, buf[3]=0x00, buf[4]=0x00, buf[5]=0x00, buf[6]=0x00
[ 1.450118] [NVT-ts] nvt_ts_probe 1591: chip is not identified
[ 1.450303] NVT-ts: probe of 4-0062 failed with error -22
[ 1.450438] nvt_driver_init: finished
[ 1.483180] hbtp soc:hbtp: Can not find ts seq delay
[ 1.483205] hbtp soc:hbtp: ddic pinctrl act/sus not found
[ 1.485260] input: qti-haptics as /devices/platform/soc/800f000.qcom,spmi/spmi-0/spmi0-01/800f000.qcom,spmi:qcom,pm660@1:qcom,haptic@c000/input/input1
[ 1.489255] [DBG][cdfinger]: 328: <cdfinger_parse_dts>enter
[ 1.489608] input: cdfinger_input as /devices/virtual/input/input2
[ 1.490269] focaltech_fp: 'ff_ctl_driver_init' enter.
[ 1.490527] focaltech_fp: FocalTech fingerprint device control driver registered.
[ 1.490545] focaltech_fp: 'ff_ctl_driver_init' leave.
[ 1.491498] gf_spi: status = 0x0
[ 1.492512] commonfp fingerpint init OK!!!,ret = 0
[ 1.493212] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm660@0:qcom,pm660_rtc: rtc core: registered qpnp_rtc as rtc0
[ 1.494175] i2c /dev entries driver
[ 1.494743] IR NEC protocol handler initialized
[ 1.494758] IR RC5(x/sz) protocol handler initialized
[ 1.494769] IR RC6 protocol handler initialized
[ 1.494781] IR JVC protocol handler initialized
[ 1.494791] IR Sony protocol handler initialized
[ 1.494801] IR SANYO protocol handler initialized
[ 1.494811] IR Sharp protocol handler initialized
[ 1.494821] IR MCE Keyboard/mouse protocol handler initialized
[ 1.494832] IR XMP protocol handler initialized
[ 1.496011] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-cdp-setting : doesn't exist in device tree
[ 1.496041] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-vbif-memtype : doesn't exist in device tree
[ 1.496058] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-qos-lut : doesn't exist in device tree
[ 1.496075] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-danger-lut : doesn't exist in device tree
[ 1.496092] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-safe-lut : doesn't exist in device tree
[ 1.496109] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-qos-lut : doesn't exist in device tree
[ 1.496124] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-danger-lut : doesn't exist in device tree
[ 1.496140] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-inline-rot-safe-lut : doesn't exist in device tree
[ 1.496927] sde_smmu_callback: <SDEROT_INFO> sde_smmu_callback registered domain: 1
[ 1.496941] sde_smmu_callback: <SDEROT_INFO> sde_smmu_callback registered domain: 0
[ 1.499272] No change in context(0==0), skip
[ 1.501222] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:1, panic:1, dump:2
[ 1.503311] sde_rotator c900000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
[ 1.517673] iommu: Adding device cc00000.qcom,vidc:non_secure_cb to group 8
[ 1.521235] iommu: Adding device cc00000.qcom,vidc:secure_bitstream_cb to group 9
[ 1.525323] iommu: Adding device cc00000.qcom,vidc:secure_pixel_cb to group 10
[ 1.528708] iommu: Adding device cc00000.qcom,vidc:secure_non_pixel_cb to group 11
[ 1.541855] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 12
[ 1.542014] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 8, cb->name: :vfe sid [0] = 3072\x0a,
[ 1.542029] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 8, cb->name: :vfe sid [1] = 3073\x0a,
[ 1.542055] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 8, cb->name: :vfe sid [2] = 3074\x0a,
[ 1.542078] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 8, cb->name: :vfe sid [3] = 3075\x0a,
[ 1.542814] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 13
[ 1.542963] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 2, cb->name: :cpp sid [0] = 2560\x0a,
[ 1.543641] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 14
[ 1.543793] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 2, cb->name: :jpeg_enc0 sid [0] = 2048\x0a,
[ 1.544487] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 15
[ 1.544636] CAM-SMMU cam_smmu_populate_sids:2121 __debug cnt = 2, cb->name: :jpeg_dma sid [0] = 2049\x0a,
[ 1.563724] msm_actuator_platform_probe:1993 msm_actuator_platform_probe: No/Error Actuator GPIOs
[ 1.565507] msm_eeprom_platform_probe failed 1809
[ 1.566301] msm_eeprom_platform_probe failed 1809
[ 1.567355] msm_eeprom_platform_probe failed 1809
[ 1.568415] msm_eeprom_platform_probe failed 1809
[ 1.572419] msm_subflash_platform_probe:1317 [subflash]probe success
[ 1.585323] MSM-CPP cpp_init_hardware:1135 CPP HW Version: 0x60010002
[ 1.585364] MSM-CPP cpp_init_hardware:1153 stream_cnt:0
[ 1.585946] MSM-CPP cpp_release_hardware:1216 cpp hw release done
[ 1.587880] CAM-SOC msm_camera_get_reg_base:894 err: mem resource vfe_fuse not found
[ 1.587900] CAM-SOC msm_camera_get_res_size:937 err: mem resource vfe_fuse not found
[ 1.589179] msm_vfe48_get_dual_sync_platform_data: dual-vfe-irq not supported !
[ 1.589565] CAM-SOC msm_camera_get_reg_base:894 err: mem resource vfe_fuse not found
[ 1.589583] CAM-SOC msm_camera_get_res_size:937 err: mem resource vfe_fuse not found
[ 1.590495] CAM-SOC msm_camera_get_reg_base:894 err: mem resource msm-cam not found
[ 1.590510] vfe_hw_probe:fail get dual_sync
[ 1.598532] __msm_jpeg_init:1595] Jpeg Device id 0
[ 1.604377] usbcore: registered new interface driver uvcvideo
[ 1.604402] USB Video Class driver (1.1.1)
[ 1.607789] smb1351_parallel_charger_probe: smb1351 parallel successfully probed.
[ 1.608220] [BAT][CHG]enter smb2_probe
[ 1.608237] [BAT][CHG]ADC_SW_EN=0,ADCPWREN_PMI_GP1=0
[ 1.608286] [BAT][CHG]\x013[BAT][CHG]smb2_probe: Success to request ADC_SW_EN-gpios59 71
[ 1.608316] [BAT][CHG]\x013[BAT][CHG]smb2_probe: Success to request ADCPWREN_PMI_GP1-gpios34 3
[ 1.608327] [BAT][CHG]smb2_probe pull down gpio
[ 1.608347] [BAT][CHG]\x013[BAT][CHG]ADCPWREN_PMI_GP1 init H/L 0
[ 1.608421] qcom,qpnp-smb2 800f000.qcom,spmi:qcom,pm660@0:qcom,qpnp-smb2: get chg_alert vadc good rc = 0
[ 1.610197] smb1351_is_usb_present: USB psy not found
[ 2.162906] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.163094] [BAT][CHG]smblib_usb_plugin_locked will enter micro_usb_mode
[ 2.163108] [BAT][CHG]enter smblib_micro_usb_plugin vbus_rising=1
[ 2.163120] [BAT][CHG]enter smblib_micro_usb_plugin !asus_flow_processing=1
[ 2.163133] [BAT][CHG]\x013[BAT][CHG]asus_insertion_initial_settings: start
[ 2.163346] [BAT][CHG]asus_insertion_initial_setting USBIN_cc1=0x3c
[ 2.163389] [BAT][CHG]asus_insertion_initial_setting USBIN_cc2=0x14
[ 2.163400] [BAT][CHG]asus_smblib_stay_awake: ASUS set smblib_stay_awake
[ 2.163412] [BAT][CHG]will enter asus_chg_flow_work
[ 2.163845] [BAT][CHG]\x013PMI: smblib_check_ov_condition: Couldn't get current voltage, rc=-61
[ 2.165252] [BAT][CHG]\x013PMI: smblib_get_prop_adapter_id: adapter ID=0
[ 2.165986] [BAT][CHG]\x013PMI: smblib_get_prop_adapter_id: adapter ID=0
[ 2.177716] [BAT][CHG]create proc entry driver/charger_limit_enable success
[ 2.177729] [BAT][CHG]create proc entry driver/charger_limit success
[ 2.177752] [BAT][CHG]create proc entry countrycode success
[ 2.177935] [BAT][CHG]enter1 smb2_probe HVDVP_reg=0x5d
[ 2.177981] [BAT][CHG]enter1 smb2_probe HVDVP_reg=0x59
[ 2.178004] [BAT][CHG]enter1 smb2_probe USBIN_AICL_reg=0xc4
[ 2.178047] [BAT][CHG]enter2 smb2_probe USBIN_AICL_reg=0x44
[ 2.178063] [BAT][CHG]\x016QPNP SMB2 probed successfully usb:present=1 type=0 batt:present = 1 health = 1 charge = 1
[ 2.191387] [BAT][CHG]\x013PMI: smblib_get_prop_adapter_id: adapter ID=0
[ 2.192520] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 2.192546] thermal thermal_zone33: failed to read out thermal zone (-61)
[ 2.192567] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 2.192584] thermal thermal_zone33: failed to read out thermal zone (-61)
[ 2.192647] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 2.196782] device-mapper: uevent: version 1.0.3
[ 2.197114] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[ 2.198908] bt_dt_parse_vreg_info: qca,bt-vdd-vl: is not provided in device tree
[ 2.198931] bt_dt_parse_vreg_info: qca,bt-vdd-vm: is not provided in device tree
[ 2.198949] bt_dt_parse_vreg_info: qca,bt-vdd-5c: is not provided in device tree
[ 2.198966] bt_dt_parse_vreg_info: qca,bt-vdd-5a: is not provided in device tree
[ 2.198981] bt_dt_parse_vreg_info: qca,bt-vdd-vh: is not provided in device tree
[ 2.198996] bt_dt_parse_vreg_info: qca,bt-vdd-io: is not provided in device tree
[ 2.199011] bt_dt_parse_vreg_info: qca,bt-vdd-xtal: is not provided in device tree
[ 2.199070] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
[ 2.201971] sdhci: Secure Digital Host Controller Interface driver
[ 2.201987] sdhci: Copyright(c) Pierre Ossman
[ 2.201999] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.205030] qcom_ice_get_pdevice: found ice device 00000000ae407dc6
[ 2.205041] qcom_ice_get_pdevice: matching platform device 0000000094d870f5
[ 2.205327] usbcore: registered new interface driver usbhid
[ 2.205343] usbhid: USB HID core driver
[ 2.205434] sdhci_msm c0c4000.sdhci: Failed to get dll hsr settings from dt
[ 2.205618] ashmem: initialized
[ 2.209126] qcom_ice c0c8000.sdcc1ice: QC ICE 3.0.72 device found @0x000000005201570d
[ 2.210006] scm_call failed: func id 0x42001902, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 2.210126] seemp: seemp_logk_init: SCM call failed with ret val = -5 0 0
[ 2.210410] mmc0: SDHCI controller on c0c4000.sdhci [c0c4000.sdhci] using 64-bit ADMA in CMDQ mode
[ 2.276151] mmc0: Out-of-interrupt timeout is 246[ms]
[ 2.276160] mmc0: eMMC FW version: 0x04
[ 2.276164] mmc0: CMDQ supported: depth: 32
[ 2.282686] cmdq_host_alloc_tdl: desc_size: 1024 data_sz: 63488 slot-sz: 32
[ 2.283048] mmc0: CMDQ enabled on card
[ 2.283064] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 2.284724] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
[ 2.284733] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
[ 2.284829] mmcblk0: mmc0:0001 S0J9G8 58.2 GiB
[ 2.285042] mmcblk0rpmb: mmc0:0001 S0J9G8 partition 3 4.00 MiB
[ 2.287798] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66 p67
[ 2.293648] sdhci_msm c084000.sdhci: sdhci_msm_probe: ICE device is not enabled
[ 2.293960] sdhci_msm c084000.sdhci: Failed to get dll hsr settings from dt
[ 2.308269] mmc1: SDHCI controller on c084000.sdhci [c084000.sdhci] using 64-bit ADMA in legacy mode
[ 2.337870] bimc-bwmon 1008000.qcom,cpu-cpu-ddr-bwmon: BW HWmon governor registered.
[ 2.340215] arm-memlat-mon soc:qcom,cpu0-cpu-ddr-latmon: Memory Latency governor registered.
[ 2.340363] arm-memlat-mon soc:qcom,cpu4-cpu-ddr-latmon: Memory Latency governor registered.
[ 2.340485] arm-memlat-mon soc:qcom,cpu0-computemon: Compute governor registered.
[ 2.340601] arm-memlat-mon soc:qcom,cpu4-computemon: Compute governor registered.
[ 2.356285] qcom-spmi-adc5.c 800f000.qcom,spmi:qcom,pm660@0:vadc@3100: 19 invalid decimation 0
[ 2.356302] adc get dt data failed
[ 2.356344] qcom-spmi-adc5.c: probe of 800f000.qcom,spmi:qcom,pm660@0:vadc@3100 failed with error -22
[ 2.359900] coresight-tmc 6048000.tmc: failed to get flush cti, defer probe
[ 2.360437] coresight-tmc 6047000.tmc: failed to get flush cti, defer probe
[ 2.361164] coresight-funnel 6045000.funnel: FUNNEL initialized
[ 2.361763] coresight-funnel 6041000.funnel: FUNNEL initialized
[ 2.362340] coresight-funnel 6042000.funnel: FUNNEL initialized
[ 2.362911] coresight-funnel 7b70000.funnel: FUNNEL initialized
[ 2.363512] coresight-funnel 7b60000.funnel: FUNNEL initialized
[ 2.364103] coresight-funnel 6005000.funnel: FUNNEL initialized
[ 2.364726] coresight-funnel 71c3000.funnel: FUNNEL initialized
[ 2.366201] coresight-replicator-qcom 6046000.replicator: REPLICATOR 1.0 initialized
[ 2.366805] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
[ 2.367005] OF: graph: no port node found in /soc/cti@6010000
[ 2.367396] OF: graph: no port node found in /soc/cti@6011000
[ 2.367838] OF: graph: no port node found in /soc/cti@6012000
[ 2.368154] OF: graph: no port node found in /soc/cti@6013000
[ 2.368452] OF: graph: no port node found in /soc/cti@6014000
[ 2.368768] OF: graph: no port node found in /soc/cti@6015000
[ 2.369071] OF: graph: no port node found in /soc/cti@6016000
[ 2.369368] OF: graph: no port node found in /soc/cti@6017000
[ 2.369655] OF: graph: no port node found in /soc/cti@6018000
[ 2.369946] OF: graph: no port node found in /soc/cti@6019000
[ 2.370303] OF: graph: no port node found in /soc/cti@601a000
[ 2.370608] OF: graph: no port node found in /soc/cti@601b000
[ 2.370910] OF: graph: no port node found in /soc/cti@601c000
[ 2.371203] OF: graph: no port node found in /soc/cti@601d000
[ 2.371497] OF: graph: no port node found in /soc/cti@601e000
[ 2.371801] OF: graph: no port node found in /soc/cti@601f000
[ 2.372092] OF: graph: no port node found in /soc/cti@7820000
[ 2.372391] OF: graph: no port node found in /soc/cti@7920000
[ 2.372694] OF: graph: no port node found in /soc/cti@7a20000
[ 2.373008] OF: graph: no port node found in /soc/cti@7b20000
[ 2.373302] OF: graph: no port node found in /soc/cti@7c20000
[ 2.373605] OF: graph: no port node found in /soc/cti@7d20000
[ 2.373906] OF: graph: no port node found in /soc/cti@7e20000
[ 2.374214] OF: graph: no port node found in /soc/cti@7f20000
[ 2.374520] OF: graph: no port node found in /soc/cti@7b80000
[ 2.374829] OF: graph: no port node found in /soc/cti@7bc1000
[ 2.375126] OF: graph: no port node found in /soc/cti@7b91000
[ 2.375432] OF: graph: no port node found in /soc/cti@7068000
[ 2.375732] OF: graph: no port node found in /soc/cti@71a4000
[ 2.376026] OF: graph: no port node found in /soc/cti@71a5000
[ 2.376317] OF: graph: no port node found in /soc/cti@71a6000
[ 2.376633] OF: graph: no port node found in /soc/cti@7188000
[ 2.376933] OF: graph: no port node found in /soc/cti@7121000
[ 2.377233] OF: graph: no port node found in /soc/cti@7048000
[ 2.377562] OF: graph: no port node found in /soc/cti@7041000
[ 2.378075] coresight-qpdi 1fc1000.qpdi: CoreSight QPDI start
[ 2.378094] OF: graph: no port node found in /soc/qpdi@1fc1000
[ 2.378131] coresight-qpdi 1fc1000.qpdi: QPDI hotplug card detection is not supported
[ 2.378517] coresight-qpdi 1fc1000.qpdi: CoreSight QPDI driver initialized
[ 2.379604] OF: graph: no port node found in /soc/csr@6001000
[ 2.379758] coresight-csr 6001000.csr: CSR initialized: coresight-csr
[ 2.380871] OF: graph: no port node found in /soc/hwevent@158000
[ 2.381098] coresight-hwevent 158000.hwevent: Hardware Event driver initialized
[ 2.383948] stk3x3x_probe: driver version = 3.11.0
[ 2.383970] stk3x3x_probe: probe with device tree
[ 2.384198] [stk3x3x ] psensor pinctrl set state sucess!
[ 2.385049] stk3x3x_power_ctl: enable stk3x3x power
[ 2.400663] stk3x3x_check_pid: PID=0x51, RID=0x0, 0x90=0xe0
[ 2.400908] input: stk3x3x-light as /devices/virtual/input/input3
[ 2.401208] input: stk3x3x-proximity as /devices/virtual/input/input4
[ 2.401530] zch---in sensors_classdev_register
[ 2.401683] zch---sensors_classdev_register Registered sensors device: stk3x3x-light
[ 2.401695] zch---in sensors_classdev_register
[ 2.401833] zch---sensors_classdev_register Registered sensors device: stk3x3x-proximity
[ 2.401871] stk3x3x_power_ctl: disable stk3x3x power
[ 2.401879] stk3x3x_probe: probe successfully
[ 2.402281] usbcore: registered new interface driver snd-usb-audio
[ 2.403006] iommu: Adding device soc:usb_audio_qmi_dev to group 16
[ 2.417728] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.421107] sdm660-pinctrl 3000000.pinctrl: invalid group "gpio999" for function "gpio"
[ 2.421154] sdm660-pinctrl 3000000.pinctrl: does not have pin group gpio999
[ 2.421173] sdm660-pinctrl 3000000.pinctrl: could not map group config for "gpio999"
[ 2.421208] sdm660-pinctrl 3000000.pinctrl: invalid group "gpio999" for function "gpio"
[ 2.421248] sdm660-pinctrl 3000000.pinctrl: does not have pin group gpio999
[ 2.421263] sdm660-pinctrl 3000000.pinctrl: could not map group config for "gpio999"
[ 2.421293] msm-cdc-pinctrl: probe of soc:msm_cdc_pinctrl@75 failed with error -22
[ 2.421341] msm-cdc-pinctrl soc:cdc_pdm_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_gpios_active, deferring probe
[ 2.421387] msm-cdc-pinctrl soc:cdc_comp_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_comp_gpios_active, deferring probe
[ 2.421429] msm-cdc-pinctrl soc:cdc_dmic_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/dmic12_gpios_active, deferring probe
[ 2.421703] sdm660-pinctrl 3000000.pinctrl: invalid group "gpio107" for function "sndwire_data"
[ 2.421771] sdm660-pinctrl 3000000.pinctrl: invalid group "gpio107" for function "sndwire_data"
[ 2.422069] sdm660-pinctrl 3000000.pinctrl: invalid group "gpio107" for function "sndwire_data"
[ 2.422134] sdm660-pinctrl 3000000.pinctrl: invalid group "gpio107" for function "sndwire_data"
[ 2.423270] msm-cdc-pinctrl soc:tert_mi2s_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/ter_mi2s_clk_active, deferring probe
[ 2.426057] audio-ref-clk soc:audio_ext_clk_native: could not find pctldev for node /soc/lpi_pinctrl@15070000/lpi_mclk0_sleep, deferring probe
[ 2.428678] aw87339_pa_init Enter
[ 2.429178] mmc1: new ultra high speed SDR104 SDXC card at address 59b4
[ 2.429530] mmcblk1: mmc1:59b4 USD00 59.2 GiB
[ 2.430107] mmcblk1: p1
[ 2.481237] [BAT][CHG]\x013PMI: smblib_get_prop_adapter_id: adapter ID=0
[ 2.481256] bcl_peripheral:bcl_read_soc battery percentage read error:-61
[ 2.499806] tfa98xx_i2c_init(): TFA98XX driver version
[ 2.500282] tfa98xx_i2c_probe(): addr=0x34
[ 2.500411] tfa98xx 6-0034: No reset GPIO provided, will not HW reset device
[ 2.500423] tfa98xx 6-0034: No IRQ GPIO provided.
[ 2.500718] tfa98xx_i2c_probe(): TFA9874 detected
[ 2.500802] tfa98xx 6-0034: Skipping IRQ registration
[ 2.500951] tfa98xx_i2c_probe(): tfa98xx_i2c_probe Probe completed successfully!
[ 2.501370] GACT probability NOT on
[ 2.501400] Mirror/redirect action on
[ 2.501422] u32 classifier
[ 2.501431] Actions configured
[ 2.501458] Netfilter messages via NETLINK v0.30.
[ 2.502277] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 2.502454] ctnetlink v0.93: registering with nfnetlink.
[ 2.503115] xt_time: kernel timezone is -0000
[ 2.503420] gre: GRE over IPv4 demultiplexor driver
[ 2.503433] IPv4 over IPsec tunneling driver
[ 2.504270] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.505304] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 2.505483] Initializing XFRM netlink socket
[ 2.505517] IPsec XFRM device driver
[ 2.506037] NET: Registered protocol family 10
[ 2.508058] Segment Routing with IPv6
[ 2.508195] mip6: Mobile IPv6
[ 2.508228] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.509700] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 2.511285] NET: Registered protocol family 17
[ 2.511324] NET: Registered protocol family 15
[ 2.511375] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.511390] Ebtables v2.0 registered
[ 2.511570] l2tp_core: L2TP core driver, V2.0
[ 2.511593] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.511605] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 2.511639] l2tp_netlink: L2TP netlink interface
[ 2.511691] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 2.511704] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 2.511900] sctp: Hash tables configured (bind 256/256)
[ 2.515429] cam_rear_dvdd_gpio_regulator: supplied by pm660_s5
[ 2.517145] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 2.517161] mdss_dp_probe: Error usbpd setup!
[ 2.520937] dwc3 a800000.dwc3: changing max_speed on rev 00000000
[ 2.532701] sps:BAM 0x000000000a904000 is registered.
[ 2.543504] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.546339] spmi spmi-0: cleanup_irq apid=31 sid=0x0 per=0x41 irq=6
[ 2.548470] FG: fg_gen3_probe: battery SOC:50 voltage: 4302967uV temp: 420
[ 2.550771] sps:BAM 0x0000000006064000 is registered.
[ 2.551115] coresight-tmc 6048000.tmc: TMC Initialized
[ 2.552096] coresight-tmc 6047000.tmc: TMC Initialized
[ 2.553145] coresight-stm 6002000.stm: STM32 initialized with master Enabled
[ 2.553847] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.554472] msm-cdc-pinctrl soc:cdc_pdm_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_gpios_active, deferring probe
[ 2.555043] msm-cdc-pinctrl soc:cdc_comp_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_comp_gpios_active, deferring probe
[ 2.555608] msm-cdc-pinctrl soc:cdc_dmic_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/dmic12_gpios_active, deferring probe
[ 2.556164] msm-cdc-pinctrl soc:tert_mi2s_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/ter_mi2s_clk_active, deferring probe
[ 2.556711] audio-ref-clk soc:audio_ext_clk_native: could not find pctldev for node /soc/lpi_pinctrl@15070000/lpi_mclk0_sleep, deferring probe
[ 2.561464] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 2.561480] mdss_dp_probe: Error usbpd setup!
[ 2.564169] core_ctl: Creating CPU group 0
[ 2.564184] core_ctl: Init CPU0 state
[ 2.564195] core_ctl: Init CPU1 state
[ 2.564206] core_ctl: Init CPU2 state
[ 2.564215] core_ctl: Init CPU3 state
[ 2.564441] core_ctl: Creating CPU group 4
[ 2.564454] core_ctl: Init CPU4 state
[ 2.564465] core_ctl: Init CPU5 state
[ 2.564476] core_ctl: Init CPU6 state
[ 2.564486] core_ctl: Init CPU7 state
[ 2.565117] registered taskstats version 1
[ 2.565130] Loading compiled-in X.509 certificates
[ 2.565531] FG: fg_psy_get_property: unsupported property 4
[ 2.573593] Loaded X.509 cert 'Build time autogenerated kernel key: b7cb545b24f0188b6c3f8742c8cf7e3e2b7bc013'
[ 2.574858] Loaded X.509 cert 'Android: 7e4333f9bba00adfe0ede979e28ed1920492b40f'
[ 2.574912] page_owner is disabled
[ 2.577923] Please check if `measure` clk is registered.
[ 2.613853] spss_utils [spss_init]: spss-utils driver Ver 3.0 18-Feb-2018.
[ 2.617895] ADSPRPC: Secure VMID = 33
[ 2.619038] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 17
[ 2.621194] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 18
[ 2.623037] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 19
[ 2.624848] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 20
[ 2.626694] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 21
[ 2.628510] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 22
[ 2.630430] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 23
[ 2.632298] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 24
[ 2.634174] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 25
[ 2.636056] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 26
[ 2.638162] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 27
[ 2.639974] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 28
[ 2.641990] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb13 to group 29
[ 2.653737] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.654376] msm-cdc-pinctrl soc:cdc_pdm_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_gpios_active, deferring probe
[ 2.654952] msm-cdc-pinctrl soc:cdc_comp_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_comp_gpios_active, deferring probe
[ 2.655520] msm-cdc-pinctrl soc:cdc_dmic_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/dmic12_gpios_active, deferring probe
[ 2.656079] msm-cdc-pinctrl soc:tert_mi2s_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/ter_mi2s_clk_active, deferring probe
[ 2.656635] audio-ref-clk soc:audio_ext_clk_native: could not find pctldev for node /soc/lpi_pinctrl@15070000/lpi_mclk0_sleep, deferring probe
[ 2.661614] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 2.661631] mdss_dp_probe: Error usbpd setup!
[ 2.668176] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input5
[ 2.668920] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm660@0:qcom,pm660_rtc: setting system clock to 1970-12-11 04:24:08 UTC (29737448)
[ 2.672758] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.673652] msm-cdc-pinctrl soc:cdc_pdm_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_gpios_active, deferring probe
[ 2.674295] msm-cdc-pinctrl soc:cdc_comp_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_comp_gpios_active, deferring probe
[ 2.674433] lpm_levels: register_cluster_lpm_stats()
[ 2.674886] msm-cdc-pinctrl soc:cdc_dmic_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/dmic12_gpios_active, deferring probe
[ 2.674892] lpm_levels: register_cluster_lpm_stats()
[ 2.675470] msm-cdc-pinctrl soc:tert_mi2s_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/ter_mi2s_clk_active, deferring probe
[ 2.676034] audio-ref-clk soc:audio_ext_clk_native: could not find pctldev for node /soc/lpi_pinctrl@15070000/lpi_mclk0_sleep, deferring probe
[ 2.680983] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 2.681001] mdss_dp_probe: Error usbpd setup!
[ 2.683125] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.683774] msm-cdc-pinctrl soc:cdc_pdm_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_gpios_active, deferring probe
[ 2.684366] msm-cdc-pinctrl soc:cdc_comp_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_comp_gpios_active, deferring probe
[ 2.684947] msm-cdc-pinctrl soc:cdc_dmic_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/dmic12_gpios_active, deferring probe
[ 2.685520] msm-cdc-pinctrl soc:tert_mi2s_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/ter_mi2s_clk_active, deferring probe
[ 2.686216] audio-ref-clk soc:audio_ext_clk_native: could not find pctldev for node /soc/lpi_pinctrl@15070000/lpi_mclk0_sleep, deferring probe
[ 2.690901] rmnet_ipa started initialization
[ 2.690923] IPA SSR support = True
[ 2.690938] IPA ipa-loaduC = False
[ 2.690950] IPA SG support = True
[ 2.690961] IPA Napi Enable = True
[ 2.690975] using default for wan-rx-desc-size = 1024
[ 2.691651] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 2.691666] mdss_dp_probe: Error usbpd setup!
[ 2.693274] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.693877] msm-cdc-pinctrl soc:cdc_pdm_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_gpios_active, deferring probe
[ 2.694461] msm-cdc-pinctrl soc:cdc_comp_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_comp_gpios_active, deferring probe
[ 2.695046] msm-cdc-pinctrl soc:cdc_dmic_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/dmic12_gpios_active, deferring probe
[ 2.695626] msm-cdc-pinctrl soc:tert_mi2s_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/ter_mi2s_clk_active, deferring probe
[ 2.698897] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
[ 2.698925] ipa ipa2_uc_state_check:300 uC is not loaded
[ 2.700610] rmnet_ipa completed initialization
[ 2.701232] audio-ref-clk soc:audio_ext_clk_native: could not find pctldev for node /soc/lpi_pinctrl@15070000/lpi_mclk0_sleep, deferring probe
[ 2.706301] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 2.706318] mdss_dp_probe: Error usbpd setup!
[ 2.707877] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.708468] msm-cdc-pinctrl soc:cdc_pdm_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_gpios_active, deferring probe
[ 2.709051] msm-cdc-pinctrl soc:cdc_comp_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/cdc_pdm_comp_gpios_active, deferring probe
[ 2.709625] msm-cdc-pinctrl soc:cdc_dmic_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/dmic12_gpios_active, deferring probe
[ 2.710277] msm-cdc-pinctrl soc:tert_mi2s_pinctrl: could not find pctldev for node /soc/lpi_pinctrl@15070000/ter_mi2s_clk_active, deferring probe
[ 2.711732] RNDIS_IPA module is loaded.
[ 2.714084] qcom-lpi-pinctrl 15070000.lpi_pinctrl: lpi_pinctrl_runtime_resume: unable to get core clk handle -2
[ 2.719439] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 2.719456] mdss_dp_probe: Error usbpd setup!
[ 2.721347] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.727011] regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
[ 2.727266] ALSA device list:
[ 2.727281] No soundcards found.
[ 2.727379] Warning: unable to open an initial console.
[ 2.731239] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 2.731256] mdss_dp_probe: Error usbpd setup!
[ 2.732810] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 2.771560] Freeing unused kernel memory: 6144K
[ 2.790099] init: init first stage started!
[ 2.793184] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 2.796165] init: [libfs_mgr]ReadDefaultFstab(): failed to find device default fstab
[ 2.810640] qcom-lpi-pinctrl 15070000.lpi_pinctrl: lpi_pinctrl_runtime_suspend: unable to get core clk handle -2
[ 2.811320] [BAT][CHG]\x013PMI: smblib_get_prop_adapter_id: adapter ID=0
[ 2.911104] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/soc/c0c4000.sdhci/by-name/system
[ 2.923670] EXT4-fs (mmcblk0p13): mounted filesystem without journal. Opts: barrier=1,discard
[ 2.923795] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/c0c4000.sdhci/by-name/system,target=/system,type=ext4)=0: Success
[ 2.924338] init: Switching root to '/system'
[ 2.934711] init: [libfs_mgr]superblock s_max_mnt_count:65535,/dev/block/platform/soc/c0c4000.sdhci/by-name/vendor
[ 2.934851] init: [libfs_mgr]Filesystem on /dev/block/platform/soc/c0c4000.sdhci/by-name/vendor was not cleanly shutdown; state flags: 0x0, incompat feature flags: 0x42
[ 2.941395] EXT4-fs (mmcblk0p14): Ignoring removed nomblk_io_submit option
[ 2.946637] EXT4-fs (mmcblk0p14): warning: mounting unchecked fs, running e2fsck is recommended
[ 2.950439] EXT4-fs (mmcblk0p14): mounted filesystem without journal. Opts: errors=remount-ro,nomblk_io_submit
[ 2.950552] init: [libfs_mgr]check_fs(): mount(/dev/block/platform/soc/c0c4000.sdhci/by-name/vendor,/vendor,ext4)=0: Success
[ 2.961887] init: [libfs_mgr]check_fs(): unmount(/vendor) succeeded
[ 2.971896] [BAT][CHG]smblib_handle_apsd_done--> smblib_force_legacy_icl has done
[ 2.972734] e2fsck: executing /system/bin/e2fsck failed: No such file or directory\x0a
[ 2.972777] e2fsck: e2fsck terminated by exit(255)\x0a
[ 2.977460] msm-dwc3 a800000.ssusb: DWC3 exited from low power mode
[ 2.983082] EXT4-fs (mmcblk0p14): mounted filesystem without journal. Opts: barrier=1,discard
[ 3.005484] init: 4 output lines suppressed due to ratelimiting
[ 3.021121] of_batterydata_get_best_profile: 3292665_huaqin_ql1626cos_5000mah_averaged_masterslave_jan8th2018 found
[ 3.021154] FG: fg_get_batt_profile: battery fastchg current unavailable, rc:-22
[ 3.021170] enter fg_get_batt_profile chip->bp.vbatt_full_mv=4340
[ 3.028928] status_change_work chip->charge_done=0
[ 3.029800] enter fg_charge_full_update recharge_soc=250
[ 3.030350] enter fg_charge_full_update msoc_raw=255
[ 3.030371] enter fg_charge_full_update msoc: 100 bsoc: fef9
[ 3.090553] status_change_work chip->charge_done=0
[ 3.090956] enter fg_charge_full_update recharge_soc=250
[ 3.091332] enter fg_charge_full_update msoc_raw=255
[ 3.091337] enter fg_charge_full_update msoc: 100 bsoc: fef9
[ 3.241216] init: Loading SELinux policy
[ 3.276034] SELinux: 16384 avtab hash slots, 46738 rules.
[ 3.350874] SELinux: 16384 avtab hash slots, 46738 rules.
[ 3.350920] SELinux: 1 users, 4 roles, 2169 types, 0 bools, 1 sens, 1024 cats
[ 3.350939] SELinux: 97 classes, 46738 rules
[ 3.362276] SELinux: policy capability network_peer_controls=1
[ 3.362297] SELinux: policy capability open_perms=1
[ 3.362310] SELinux: policy capability extended_socket_class=1
[ 3.362323] SELinux: policy capability always_check_network=0
[ 3.362334] SELinux: policy capability cgroup_seclabel=0
[ 3.362345] SELinux: policy capability nnp_nosuid_transition=1
[ 3.362356] SELinux: Completing initialization.
[ 3.362362] SELinux: Setting up existing superblocks.
[ 3.726422] audit: type=1403 audit(29737449.549:2): policy loaded auid=4294967295 ses=4294967295
[ 3.727288] selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy\x0a
[ 3.756635] selinux: SELinux: Loaded file_contexts\x0a
[ 3.866168] init: init second stage started!
[ 3.945540] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 3.965714] selinux: SELinux: Loaded file_contexts\x0a
[ 3.965783] init: Running restorecon...
[ 4.045944] init: Couldn't load property file '/product_services/build.prop': open() failed: No such file or directory: No such file or directory
[ 4.046062] init: Couldn't load property file '/factory/factory.prop': open() failed: No such file or directory: No such file or directory
[ 4.050980] init: Setting product property ro.product.brand to 'asus' (from ro.product.odm.brand)
[ 4.051083] init: Setting product property ro.product.device to 'ASUS_X01BD_1' (from ro.product.odm.device)
[ 4.051175] init: Setting product property ro.product.manufacturer to 'asus' (from ro.product.odm.manufacturer)
[ 4.051262] init: Setting product property ro.product.model to 'ASUS_X01BDA' (from ro.product.odm.model)
[ 4.438854] ueventd: ueventd started!
[ 4.456232] selinux: SELinux: Loaded file_contexts\x0a
[ 4.456632] ueventd: Parsing file /ueventd.rc...
[ 4.458825] ueventd: Parsing file /vendor/ueventd.rc...
[ 4.463195] ueventd: /vendor/ueventd.rc: 168: /sys/ lines must have 5 entries
[ 4.466998] ueventd: Parsing file /odm/ueventd.rc...
[ 4.467094] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 4.467164] ueventd: Parsing file /ueventd.qcom.rc...
[ 4.467228] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory
[ 4.515385] apexd: Bootstrap subcommand detected
[ 4.786956] [BAT][CHG]\x013PMI: smblib_get_prop_adapter_id: adapter ID=0
[ 5.691022] apexd: wait for '/dev/loop-control' took 1147ms
[ 5.691498] apexd: Pre-allocated 9 loopback devices
[ 5.691972] apexd: Scanning /system/apex for embedded keys
[ 5.698856] apexd: Scanning /product/apex for embedded keys
[ 5.699218] apexd: ... does not exist. Skipping
[ 5.699541] apexd: Scanning /system/apex looking for APEX packages.
[ 5.700261] apexd: Found /system/apex/com.android.media.apex
[ 5.701601] apexd: Skipped when bootstrapping
[ 5.701934] apexd: Found /system/apex/com.android.apex.cts.shim.apex
[ 6.097876] EXT4-fs (loop0): mounted filesystem without journal. Opts: (null)
[ 6.375132] EXT4-fs (loop1): mounted filesystem without journal. Opts: (null)
[ 6.380004] apexd: 15 output lines suppressed due to ratelimiting
[ 6.516363] audit: type=1400 audit(29737452.339:3): avc: denied { read } for pid=444 comm="ueventd" name="/" dev="debugfs" ino=1 scontext=u:r:ueventd:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=1
[ 6.516383] audit: type=1400 audit(29737452.339:4): avc: denied { open } for pid=444 comm="ueventd" path="/sys/kernel/debug" dev="debugfs" ino=1 scontext=u:r:ueventd:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=1
[ 6.516390] audit: type=1400 audit(29737452.339:5): avc: denied { getattr } for pid=444 comm="ueventd" path="/sys/kernel/debug/show_mem_notifier" dev="debugfs" ino=16386 scontext=u:r:ueventd:s0 tcontext=u:object_r:debugfs:s0 tclass=file permissive=1
[ 6.518454] audit: type=1400 audit(29737452.339:6): avc: denied { getattr } for pid=444 comm="ueventd" path="/sys/kernel/debug/wakeup_sources" dev="debugfs" ino=2050 scontext=u:r:ueventd:s0 tcontext=u:object_r:debugfs_wakeup_sources:s0 tclass=file permissive=1
[ 6.728119] audit: type=1400 audit(29737452.549:7): avc: denied { relabelfrom } for pid=444 comm="ueventd" name="ipc_logging" dev="debugfs" ino=2053 scontext=u:r:ueventd:s0 tcontext=u:object_r:debugfs:s0 tclass=dir permissive=1
[ 6.728139] audit: type=1400 audit(29737452.549:8): avc: denied { relabelto } for pid=444 comm="ueventd" name="ipc_logging" dev="debugfs" ino=2053 scontext=u:r:ueventd:s0 tcontext=u:object_r:qti_debugfs:s0 tclass=dir permissive=1
[ 14.560490] [BAT][CHG]enter asus_chg_flow_work
[ 14.560559] [BAT][CHG]enter asus_chg_flow_work apsd_result->pst=4
[ 14.560579] [BAT][CHG]asus_chg_flow_work enter FLOAT_CHARGER_BIT
[ 14.560604] [BAT][CHG]asus_chg_flow_work usbmode_USBIN_1_cc=0x4
[ 14.561081] status_change_work chip->charge_done=0
[ 14.561584] enter fg_charge_full_update recharge_soc=250
[ 14.562005] enter fg_charge_full_update msoc_raw=255
[ 14.562020] enter fg_charge_full_update msoc: 100 bsoc: feef
[ 14.620506] [BAT][CHG]enter mid asus_smblib_rerun_aicl
[ 14.620562] [BAT][CHG]enter asus_min_monitor_work
[ 14.620587] [BAT][CHG]enter jeita_rule
[ 14.620653] [BAT][CHG]jeita_rule Read fast CC=0x64,USBIN_ICL_reg=0x1
[ 14.620665] [BAT][CHG]enter asus_get_prop_batt_health--> smblib_get_prop_batt_health
[ 14.620688] [BAT][CHG]enter asus_get_batt_health bat_health=1
[ 14.620700] [BAT][CHG]jeita_rule bat_health=0
[ 14.620795] [BAT][CHG]enter smbchg_jeita_judge_state old_state=0
[ 14.620806] [BAT][CHG]end smbchg_jeita_judge_state result_State=3
[ 14.620828] [BAT][CHG]jeita_rule: state=3,batt_health = GOOD, bat_temp = 420, bat_volt = 4288807, bat_capacity=100,ICL = 0x13, FV_reg=0x73, Countrycode 0
[ 14.620840] [BAT][CHG]jeita_rule: 10 <= temperature < 45
[ 14.620862] [BAT][CHG]enter SW_recharge termination_reg=0x3
[ 14.620918] [BAT][CHG]\x013[BAT][CHG]SW_recharge: bat_capacity = 100, termination_reg = 0x3
[ 14.620940] [BAT][CHG]enter asus_min_monitor_work--> asus_get_prop_usb_present
[ 14.620954] [BAT][CHG]end asus_min_monitor_work
[ 14.620964] [BAT][CHG]asus_smblib_relax: ASUS set smblib_relax
[ 14.620979] [BAT][CHG][BAT][CHG] asus_batt_RTC_work: alarm start after 60s
[ 15.392111] ueventd: Coldboot took 10.917 seconds
[ 15.395781] init: wait for '/dev/.coldboot_done' took 9004ms
[ 15.397120] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) took 9005ms and succeeded
[ 15.397328] init: processing action (MixHwrngIntoLinuxRng) from (<Builtin Action>:0)
[ 15.449443] init: Mixed 512 bytes from /dev/hw_random into /dev/urandom
[ 15.449569] init: Command 'MixHwrngIntoLinuxRng' action=MixHwrngIntoLinuxRng (<Builtin Action>:0) took 52ms and succeeded
[ 15.449698] init: processing action (SetMmapRndBits) from (<Builtin Action>:0)
[ 15.451773] init: processing action (SetKptrRestrict) from (<Builtin Action>:0)
[ 15.452383] init: processing action (KeychordInit) from (<Builtin Action>:0)
[ 15.452786] init: EVIOCSMASK not supported: Invalid argument
[ 15.453631] init: processing action (console_init) from (<Builtin Action>:0)
[ 15.573570] Registered swp emulation handler
[ 15.895970] init: wait for '/dev/block/platform/soc/c0c4000.sdhci' took 0ms
[ 15.912424] logd.auditd: start
[ 15.912476] logd.klogd: 15912443847
[ 15.918880] EXT4-fs (mmcblk0p67): Ignoring removed nomblk_io_submit option
[ 15.935912] EXT4-fs (mmcblk0p67): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 15.936508] EXT4-fs (mmcblk0p67): errors=remount-ro for active namespaces on umount 0
[ 16.162305] e2fsck: e2fsck 1.44.4 (18-Aug-2018)\x0a
[ 16.162378] e2fsck: /dev/block/bootdevice/by-name/userdata: clean, 2396/3391488 files, 697079/13547259 blocks (check in 2 mounts)\x0a
[ 16.190104] EXT4-fs (mmcblk0p67): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard,lazytime
[ 16.246336] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
[ 16.262836] EXT4-fs (mmcblk0p58): mounted filesystem with ordered data mode. Opts: barrier=1
[ 16.277889] EXT4-fs (mmcblk0p46): mounted filesystem with ordered data mode. Opts: barrier=1
[ 16.293979] type=1400 audit(29737462.119:9): avc: denied { getattr } for comm="init" name="/" dev="mmcblk0p25" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:firmware_file:s0 tclass=filesystem permissive=1
[ 16.297938] type=1400 audit(29737462.119:9): avc: denied { getattr } for comm="init" name="/" dev="mmcblk0p25" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:firmware_file:s0 tclass=filesystem permissive=1
[ 16.297955] type=1400 audit(29737462.119:10): avc: denied { getattr } for comm="init" name="/" dev="mmcblk0p40" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:bt_firmware_file:s0 tclass=filesystem permissive=1
[ 16.419363] vdc: Waited 0ms for vold
[ 17.249694] vdc: Waited 0ms for vold
[ 17.526027] apexd: Marking APEXd as starting
[ 17.527486] apexd: Scanning /system/apex for embedded keys
[ 17.529017] apexd: Found bundled key in package /system/apex/com.android.media.apex
[ 17.531416] apexd: Found bundled key in package /system/apex/com.android.apex.cts.shim.apex
[ 17.532581] apexd: Found bundled key in package /system/apex/com.android.runtime.release.apex
[ 17.533690] apexd: Found bundled key in package /system/apex/com.android.media.swcodec.apex
[ 17.534749] apexd: Found bundled key in package /system/apex/com.android.conscrypt.apex
[ 17.535766] apexd: Found bundled key in package /system/apex/com.android.resolv.apex
[ 17.536801] apexd: Found bundled key in package /system/apex/com.android.tzdata.apex
[ 17.537311] apexd: Scanning /product/apex for embedded keys
[ 17.782440] EXT4-fs (loop2): mounted filesystem without journal. Opts: (null)
[ 18.069188] EXT4-fs (loop3): mounted filesystem without journal. Opts: (null)
[ 18.412472] EXT4-fs (loop4): mounted filesystem without journal. Opts: (null)
[ 18.723274] EXT4-fs (loop5): mounted filesystem without journal. Opts: (null)
[ 18.751867] ueventd: firmware: loading 'adsp.mdt' for '/devices/platform/soc/15700000.qcom,lpass/firmware/adsp.mdt'
[ 18.759468] ueventd: loading /devices/platform/soc/15700000.qcom,lpass/firmware/adsp.mdt took 8ms
[ 18.759569] subsys-pil-tz 15700000.qcom,lpass: adsp: loading from 0x0000000092a00000 to 0x0000000094800000
[ 18.822022] ueventd: firmware: loading 'adsp.b02' for '/devices/platform/soc/15700000.qcom,lpass/firmware/adsp.b02'
[ 18.824541] ueventd: loading /devices/platform/soc/15700000.qcom,lpass/firmware/adsp.b02 took 3ms
[ 18.842443] ueventd: firmware: loading 'adsp.b03' for '/devices/platform/soc/15700000.qcom,lpass/firmware/adsp.b03'
[ 18.847410] ueventd: loading /devices/platform/soc/15700000.qcom,lpass/firmware/adsp.b03 took 5ms
[ 18.851080] ueventd: firmware: loading 'adsp.b04' for '/devices/platform/soc/15700000.qcom,lpass/firmware/adsp.b04'
[ 18.866295] ueventd: firmware: loading 'adsp.b05' for '/devices/platform/soc/15700000.qcom,lpass/firmware/adsp.b05'
[ 18.882078] ueventd: firmware: loading 'adsp.b06' for '/devices/platform/soc/15700000.qcom,lpass/firmware/adsp.b06'
[ 18.907093] EXT4-fs (loop6): mounted filesystem without journal. Opts: (null)
[ 19.040612] EXT4-fs (loop7): mounted filesystem without journal. Opts: (null)
[ 19.260442] EXT4-fs (loop8): mounted filesystem without journal. Opts: (null)
[ 19.338325] subsys-pil-tz 15700000.qcom,lpass: adsp: Brought out of reset
[ 19.351710] subsys-pil-tz 15700000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 19.351737] subsys-pil-tz 15700000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 19.360726] apr_tal_rpmsg qcom,glink:adsp.apr_audio_svc.-1.-1: apr_tal_rpmsg_probe: Channel[apr_audio_svc] state[Up]
[ 19.365765] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 19.365788] mdss_dp_probe: Error usbpd setup!
[ 19.367353] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 19.372309] adsprpc: fastrpc_rpmsg_probe: opened rpmsg channel for adsp
[ 19.372626] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 19.372644] mdss_dp_probe: Error usbpd setup!
[ 19.374189] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 19.379292] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 19.379310] mdss_dp_probe: Error usbpd setup!
[ 19.413602] vdc: Waited 0ms for vold
[ 19.664982] type=1400 audit(29737462.119:10): avc: denied { getattr } for comm="init" name="/" dev="mmcblk0p40" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:bt_firmware_file:s0 tclass=filesystem permissive=1
[ 19.665016] type=1400 audit(29737465.489:11): avc: denied { setattr } for comm="init" name="cdfinger" dev="mmcblk0p67" ino=1703942 scontext=u:r:vendor_init:s0 tcontext=u:object_r:cdfinger_data_file:s0 tclass=dir permissive=1
[ 19.665202] type=1400 audit(29737465.489:11): avc: denied { setattr } for comm="init" name="cdfinger" dev="mmcblk0p67" ino=1703942 scontext=u:r:vendor_init:s0 tcontext=u:object_r:cdfinger_data_file:s0 tclass=dir permissive=1
[ 19.665221] type=1400 audit(29737465.489:12): avc: denied { getattr } for comm="init" path="/data/system/cdfinger" dev="mmcblk0p67" ino=1703942 scontext=u:r:vendor_init:s0 tcontext=u:object_r:cdfinger_data_file:s0 tclass=dir permissive=1
[ 19.666555] type=1400 audit(29737465.489:12): avc: denied { getattr } for comm="init" path="/data/system/cdfinger" dev="mmcblk0p67" ino=1703942 scontext=u:r:vendor_init:s0 tcontext=u:object_r:cdfinger_data_file:s0 tclass=dir permissive=1
[ 19.961014] subsys-pil-tz 1a300000.qcom,turing: cdsp: loading from 0x0000000094a00000 to 0x0000000095000000
[ 20.055090] subsys-pil-tz 1a300000.qcom,turing: cdsp: Brought out of reset
[ 20.063365] subsys-pil-tz 1a300000.qcom,turing: cdsp: Power/Clock ready interrupt received
[ 20.063440] subsys-pil-tz 1a300000.qcom,turing: Subsystem error monitoring/handling services are up
[ 20.066587] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 20.069155] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 20.069167] mdss_dp_probe: Error usbpd setup!
[ 20.070698] can't get fw name.
[ 20.070711] sensors-ssc soc:qcom,msm-ssc-sensors: slpi_load_fw: SLPI image loading failed
[ 20.072807] adsprpc: fastrpc_rpmsg_probe: opened rpmsg channel for cdsp
[ 20.073826] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 20.079098] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 20.079108] mdss_dp_probe: Error usbpd setup!
[ 20.080323] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 20.402080] init: Opened file '/dev/kmsg', flags 1
[ 20.406070] init: starting service 'vendor.light-hal-2-0'...
[ 20.423272] init: starting service 'vendor.memtrack-hal-1-0'...
[ 20.440786] init: starting service 'vendor.power-hal-1-2'...
[ 20.464005] init: starting service 'vendor.thermal-hal-1-0'...
[ 20.506596] init: starting service 'vendor.usb-hal-1-0'...
[ 20.507662] healthd: battery l=100 v=4322 t=42.0 h=2 st=2 c=16 fc=4884000 cc=0 chg=u
[ 20.562625] init: starting service 'vendor.vr-1-0'...
[ 20.612206] init: starting service 'vendor.wifi_hal_legacy'...
[ 20.638808] init: starting service 'display-color-hal-1-0'...
[ 20.683436] init: starting service 'vendor.trust-hal-1-0'...
[ 20.799794] [Display] unblank called. cur pwr state=0
[ 20.867956] ueventd: firmware: loading 'a530_pm4.fw' for '/devices/platform/soc/5000000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pm4.fw'
[ 20.870517] ueventd: loading /devices/platform/soc/5000000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pm4.fw took 3ms
[ 20.908452] healthd: battery l=100 v=4322 t=42.0 h=2 st=2 c=16 fc=4884000 cc=0 chg=u
[ 20.922297] ueventd: firmware: loading 'a530_pfp.fw' for '/devices/platform/soc/5000000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pfp.fw'
[ 20.924609] ueventd: loading /devices/platform/soc/5000000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pfp.fw took 2ms
[ 20.949829] ueventd: firmware: loading 'cmnlib64.mdt' for '/devices/virtual/qseecom/qseecom/cmnlib64.mdt'
[ 20.952336] ueventd: firmware: loading 'a512_zap.mdt' for '/devices/platform/soc/soc:qcom,kgsl-hyp/firmware/a512_zap.mdt'
[ 20.953000] ueventd: loading /devices/virtual/qseecom/qseecom/cmnlib64.mdt took 3ms
[ 20.965629] ueventd: firmware: loading 'cmnlib64.b00' for '/devices/virtual/qseecom/qseecom/cmnlib64.b00'
[ 20.966730] ueventd: loading /devices/platform/soc/soc:qcom,kgsl-hyp/firmware/a512_zap.mdt took 16ms
[ 20.968286] ueventd: loading /devices/virtual/qseecom/qseecom/cmnlib64.b00 took 2ms
[ 20.981087] subsys-pil-tz soc:qcom,kgsl-hyp: a512_zap: loading from 0x00000000fbb00000 to 0x00000000fbb02000
[ 21.045733] subsys-pil-tz soc:qcom,kgsl-hyp: a512_zap: Brought out of reset
[ 21.108417] type=1400 audit(29737466.709:16): avc: denied { execute_no_trans } for comm="init" path="/vendor/bin/nvram_country" dev="mmcblk0p14" ino=193 scontext=u:r:init:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=1
[ 21.108454] type=1400 audit(29737466.929:17): avc: denied { dac_read_search } for comm="chown" capability=2 scontext=u:r:qti_init_shell:s0 tcontext=u:r:qti_init_shell:s0 tclass=capability permissive=1
[ 21.235822] QSEECOM: qseecom_load_app: App (soter64) does'nt exist, loading apps for first time
[ 21.244856] scm_call failed: func id 0x72000101, ret: -2, syscall returns: 0xffffffffffffffff, 0x0, 0x0
[ 21.244871] QSEECOM: qseecom_load_app: scm_call to load app failed
[ 21.244897] QSEECOM: qseecom_ioctl: failed load_app request: -22
[ 21.263880] rmt_storage:INFO:check_support_using_libmdm: Modem subsystem found on target!
[ 21.269111] rmt_storage:INFO:main: Done with init now waiting for messages!
[ 21.346860] type=1400 audit(29737466.929:17): avc: denied { dac_read_search } for comm="chown" capability=2 scontext=u:r:qti_init_shell:s0 tcontext=u:r:qti_init_shell:s0 tclass=capability permissive=1
[ 21.346889] type=1400 audit(29737467.169:18): avc: denied { setattr } for comm="init" name="rawdump" dev="tmpfs" ino=14810 scontext=u:r:vendor_init:s0 tcontext=u:object_r:block_device:s0 tclass=lnk_file permissive=1
[ 21.410873] Mass Storage Function, version: 2009/09/11
[ 21.410891] LUN: removable file: (no medium)
[ 21.422318] file system registered
[ 21.424807] f_cdev_alloc: port_name:at_usb0 (0000000000000000) portno:(0)
[ 21.426015] f_cdev_alloc: port_name:at_usb1 (0000000000000000) portno:(1)
[ 21.428627] f_cdev_alloc: port_name:at_usb2 (0000000000000000) portno:(2)
[ 21.767490] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
[ 21.767542] IPA received MPSS BEFORE_POWERUP
[ 21.767760] ipa ipa2_uc_state_check:300 uC is not loaded
[ 21.767801] ipa ipa_sps_irq_control_all:963 EP (5) not allocated.
[ 21.768897] IPA BEFORE_POWERUP handling is complete
[ 21.802464] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x000000008ac00000 to 0x0000000092200000
[ 21.854778] type=1400 audit(29737467.169:18): avc: denied { setattr } for comm="init" name="rawdump" dev="tmpfs" ino=14810 scontext=u:r:vendor_init:s0 tcontext=u:object_r:block_device:s0 tclass=lnk_file permissive=1
[ 21.855375] type=1400 audit(29737467.679:19): avc: denied { read } for comm="thermal-engine" name="kgsl" dev="sysfs" ino=34606 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 21.856159] type=1400 audit(29737467.679:19): avc: denied { read } for comm="thermal-engine" name="kgsl" dev="sysfs" ino=34606 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 21.856180] type=1400 audit(29737467.679:20): avc: denied { open } for comm="thermal-engine" path="/sys/class/kgsl" dev="sysfs" ino=34606 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 21.872476] firmware msadp: _request_firmware_load: firmware state wait timeout: rc = -2
[ 21.872700] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
[ 21.872741] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x0000000094800000 to 0x0000000094900000
[ 21.877660] read descriptors
[ 21.877760] read strings
[ 21.900876] type=1400 audit(29737467.679:20): avc: denied { open } for comm="thermal-engine" path="/sys/class/kgsl" dev="sysfs" ino=34606 scontext=u:r:thermal-engine:s0 tcontext=u:object_r:sysfs:s0 tclass=dir permissive=1
[ 21.900917] type=1400 audit(29737467.719:21): avc: denied { dac_read_search } for comm="init.class_main" capability=2 scontext=u:r:qti_init_shell:s0 tcontext=u:r:qti_init_shell:s0 tclass=capability permissive=1
[ 21.932602] MAIN_MGR: hvdcp_opti Version: 3:0:0
[ 21.945620] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[ 21.988452] PPS: Registered PPS
[ 21.989449] CTM: file connector_health does not exist in /sys/class/power_supply/usb/
[ 21.989700] CTM: Couldn't read connector_health from /sys/class/power_supply/parallel/
[ 21.993403] CP: charge_pump missing
[ 21.995821] THERM-BALANCE: Bad Parallel.
[ 21.996830] SOH-D: SOH file not exposed, disable SOH
[ 21.997040] STD-PD: Registered STD_PD
[ 22.009467] HVDCP2: Registered HVDCP2
[ 22.117852] hvdcpd: Registered HVDCP
[ 22.497719] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ipsec_test
[ 22.570645] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ipsec_test
[ 23.082087] read descriptors
[ 23.082361] read strings
[ 23.494494] focaltech_fp: 'ff_ctl_open' nothing to do.
[ 23.494512] focaltech_fp: 'ff_ctl_ioctl' enter.
[ 23.494517] focaltech_fp: ff_ctl_ioctl(.., FF_IOC_SYNC_CONFIG, ..) invoke.
[ 23.494521] focaltech_fp: 'ff_ctl_ioctl' leave.
[ 23.494597] focaltech_fp: 'ff_ctl_fasync' enter.
[ 23.494607] focaltech_fp: ff_ctl_fasync: mode = 0x00000001.
[ 23.494618] focaltech_fp: 'ff_ctl_fasync' leave.
[ 23.494631] focaltech_fp: 'ff_ctl_ioctl' enter.
[ 23.494646] focaltech_fp: ff_ctl_ioctl(.., FF_IOC_INIT_DRIVER, ..) invoke.
[ 23.494650] focaltech_fp: 'ff_ctl_init_driver' enter.
[ 23.494653] focaltech_fp: 'ff_ctl_init_pins' enter.
[ 23.496554] android_work: did not send uevent (0 0 0000000000000000)
[ 23.497226] focaltech_fp: gpio_to_irq(72) = 237.
[ 23.497234] focaltech_fp: 'ff_ctl_init_pins' leave.
[ 23.497321] focaltech_fp: 'ff_ctl_enable_power' enter.
[ 23.497325] focaltech_fp: power: 'on'.
[ 23.591366] msm-dwc3 a800000.ssusb: Avail curr from USB = 100
[ 23.613127] focaltech_fp: 'ff_ctl_enable_power' leave.
[ 23.613137] focaltech_fp: 'ff_ctl_init_driver' leave.
[ 23.613140] focaltech_fp: 'ff_ctl_ioctl' leave.
[ 23.613192] focaltech_fp: 'ff_ctl_ioctl' enter.
[ 23.613210] focaltech_fp: ff_ctl_ioctl(.., FF_IOC_GET_VERSION, ..) invoke.
[ 23.613238] focaltech_fp: 'ff_ctl_get_version' enter.
[ 23.613281] focaltech_fp: version: 'v2.1.2-20200506-msm8916'.
[ 23.613286] focaltech_fp: 'ff_ctl_get_version' leave.
[ 23.613337] focaltech_fp: 'ff_ctl_ioctl' leave.
[ 23.636785] ipa ipa2_nat_del_cmd:802 Nat table not initialized
[ 23.643328] QSEECOM: qseecom_load_app: App (focalfp) does'nt exist, loading apps for first time
[ 23.672340] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[ 23.680287] android_work: sent uevent USB_STATE=CONNECTED
[ 23.744172] QSEECOM: qseecom_load_app: App with id 131074 (focalfp) now loaded
[ 23.776454] focaltech_fp: 'ff_ctl_ioctl' enter.
[ 23.776462] focaltech_fp: ff_ctl_ioctl(.., FF_IOC_RESET_DEVICE, ..) invoke.
[ 23.776465] focaltech_fp: 'ff_ctl_reset_device' enter.
[ 23.786487] focaltech_fp: 'ff_ctl_reset_device' leave.
[ 23.786494] focaltech_fp: 'ff_ctl_ioctl' leave.
[ 23.797186] Received stop ack interrupt from modem
[ 23.797199] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[ 23.807111] IPA received MPSS AFTER_POWERUP
[ 23.807117] IPA AFTER_POWERUP handling is complete
[ 23.809874] configfs-gadget gadget: high-speed config #1: b
[ 23.809999] msm-dwc3 a800000.ssusb: Avail curr from USB = 500
[ 23.818101] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 23.818112] mdss_dp_probe: Error usbpd setup!
[ 23.818917] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 23.821082] android_work: sent uevent USB_STATE=CONFIGURED
[ 23.827762] qrtr: Modem QMI Readiness RX cmd:0x2 node[0x0]
[ 23.835740] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 23.835753] mdss_dp_probe: Error usbpd setup!
[ 23.838788] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 23.847799] healthd: battery l=100 v=4289 t=42.0 h=2 st=2 c=-287 fc=4884000 cc=0 chg=u
[ 23.866441] healthd: battery l=100 v=4289 t=42.0 h=2 st=2 c=-287 fc=4884000 cc=0 chg=u
[ 23.910360] capability: warning: `msm_irqbalance' uses 32-bit capabilities (legacy support in use)
[ 23.994777] focaltech_fp: 'ff_ctl_ioctl' enter.
[ 23.994795] focaltech_fp: ff_ctl_ioctl(.., FF_IOC_FREE_DRIVER, ..) invoke.
[ 23.994805] focaltech_fp: 'ff_ctl_free_driver' enter.
[ 23.994817] focaltech_fp: 'ff_ctl_enable_power' enter.
[ 23.994825] focaltech_fp: power: 'off'.
[ 24.020285] focaltech_fp: 'ff_ctl_enable_power' leave.
[ 24.020348] focaltech_fp: 'ff_ctl_free_pins' enter.
[ 24.020381] focaltech_fp: 'ff_ctl_free_pins' leave.
[ 24.020390] focaltech_fp: 'ff_ctl_free_driver' leave.
[ 24.020398] focaltech_fp: 'ff_ctl_ioctl' leave.
[ 24.020434] focaltech_fp: 'ff_ctl_fasync' enter.
[ 24.020444] focaltech_fp: ff_ctl_fasync: mode = 0x00000000.
[ 24.020456] focaltech_fp: 'ff_ctl_fasync' leave.
[ 24.020464] focaltech_fp: 'ff_ctl_release' enter.
[ 24.020472] focaltech_fp: 'ff_ctl_fasync' enter.
[ 24.020481] focaltech_fp: ff_ctl_fasync: mode = 0x00000000.
[ 24.020488] focaltech_fp: 'ff_ctl_fasync' leave.
[ 24.020496] focaltech_fp: 'ff_ctl_release' leave.
[ 24.024454] QSEECOM: __qseecom_unload_app: App (131074) is unloaded
[ 24.062508] [DBG][cdfinger]: 389: <cdfinger_open>enter
[ 24.062662] [DBG][cdfinger]: 222: <cdfinger_init_gpio>enter
[ 24.105895] QSEECOM: qseecom_load_app: App (cdfinger) does'nt exist, loading apps for first time
[ 24.179255] QSEECOM: qseecom_load_app: App with id 196610 (cdfinger) now loaded
[ 24.195066] [DBG][cdfinger]: 463: <cdfinger_init_irq>enter
[ 25.082726] [Display] unblank called. cur pwr state=1
[ 25.804446] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 25.805039] init: starting service 'vendor.camera-provider-2-4'...
[ 26.816138] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 27.235407] init: Service 'vendor.camera-provider-2-4' (pid 1067) exited with status 1
[ 27.235469] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1067) process group...
[ 27.235938] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1067 in 0ms
[ 27.809672] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 27.811748] init: starting service 'vendor.camera-provider-2-4'...
[ 27.864638] healthd: battery l=100 v=4306 t=42.0 h=2 st=2 c=-130 fc=4884000 cc=0 chg=u
[ 28.812893] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 29.219320] mdss_mdp_cxipeak_vote: cxipeak api fail ret:-22 set_vote :0 new_rate:171428571 prev_rate:412500000
[ 29.272333] init: Service 'vendor.camera-provider-2-4' (pid 1110) exited with status 1
[ 30.817157] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 31.268821] init: Service 'vendor.camera-provider-2-4' (pid 1133) exited with status 1
[ 31.268853] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1133) process group...
[ 31.269102] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1133 in 0ms
[ 31.269266] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 31.270373] apexd: Updatable crashing, attempting rollback
[ 31.270555] apexd: Rollback failed : Rollback requested, when there are no active sessions.
[ 31.272585] init: processing action (ro.init.updatable_crashing=1) from (/system/etc/init/flags_health_check.rc:10)
[ 31.273329] init: starting service 'exec 11 (/system/bin/flags_health_check UPDATABLE_CRASHING)'...
[ 31.286301] init: SVC_EXEC service 'exec 11 (/system/bin/flags_health_check UPDATABLE_CRASHING)' pid 1149 (uid 1000 gid 1000+0 context default) started; waiting...
[ 31.312104] type=1400 audit(29737468.329:32): avc: denied { create } for comm="android.hardwar" name="ff_config.dat" scontext=u:r:hal_fingerprint_default:s0 tcontext=u:object_r:focaltech_data_file:s0 tclass=file permissive=1
[ 31.312138] type=1400 audit(29737476.189:33): avc: denied { open } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:adsprpc_prop:s0" dev="tmpfs" ino=11742 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:adsprpc_prop:s0 tclass=file permissive=1
[ 31.313132] type=1400 audit(29737476.189:33): avc: denied { open } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:adsprpc_prop:s0" dev="tmpfs" ino=11742 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:adsprpc_prop:s0 tclass=file permissive=1
[ 31.313157] type=1400 audit(29737476.189:34): avc: denied { getattr } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:adsprpc_prop:s0" dev="tmpfs" ino=11742 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:adsprpc_prop:s0 tclass=file permissive=1
[ 31.313259] type=1400 audit(29737476.189:34): avc: denied { getattr } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:adsprpc_prop:s0" dev="tmpfs" ino=11742 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:adsprpc_prop:s0 tclass=file permissive=1
[ 31.313274] type=1400 audit(29737476.189:35): avc: denied { map } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:adsprpc_prop:s0" dev="tmpfs" ino=11742 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:adsprpc_prop:s0 tclass=file permissive=1
[ 31.313347] type=1400 audit(29737476.189:35): avc: denied { map } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:adsprpc_prop:s0" dev="tmpfs" ino=11742 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:adsprpc_prop:s0 tclass=file permissive=1
[ 31.313360] type=1400 audit(29737476.189:36): avc: denied { open } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:apexd_prop:s0" dev="tmpfs" ino=11743 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:apexd_prop:s0 tclass=file permissive=1
[ 31.313431] type=1400 audit(29737476.189:36): avc: denied { open } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:apexd_prop:s0" dev="tmpfs" ino=11743 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:apexd_prop:s0 tclass=file permissive=1
[ 31.313444] type=1400 audit(29737476.189:37): avc: denied { getattr } for comm="flags_health_ch" path="/dev/__properties__/u:object_r:apexd_prop:s0" dev="tmpfs" ino=11743 scontext=u:r:flags_health_check:s0 tcontext=u:object_r:apexd_prop:s0 tclass=file permissive=1
[ 31.362194] init: Service 'exec 11 (/system/bin/flags_health_check UPDATABLE_CRASHING)' (pid 1149) exited with status 0 waiting took 0.077000 seconds
[ 31.822465] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 33.120307] gfx_mem_acc_corner: disabling
[ 33.120336] gdsc_ufs: disabling
[ 33.120396] cam_vadd_gpio_regulator: disabling
[ 33.120403] cam_vaf_gpio_regulator: disabling
[ 33.120410] cam_f_avdd_gpio_regulator: disabling
[ 33.120506] cam_rear_dvdd_gpio_regulator: disabling
[ 33.120625] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 33.120647] FG: resotre_bat_health: Read bat health file failed!
[ 34.170281] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 34.170305] FG: resotre_bat_health: Read bat health file failed!
[ 35.200316] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 35.200342] FG: resotre_bat_health: Read bat health file failed!
[ 35.825450] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 35.826005] init: starting service 'vendor.camera-provider-2-4'...
[ 36.250738] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 36.250793] FG: resotre_bat_health: Read bat health file failed!
[ 36.826113] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 37.280683] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 37.280712] FG: resotre_bat_health: Read bat health file failed!
[ 37.334214] init: Service 'vendor.camera-provider-2-4' (pid 1192) exited with status 1
[ 37.334243] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1192) process group...
[ 37.334497] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1192 in 0ms
[ 37.334646] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 37.335165] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 37.335594] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 37.797739] init: Received control message 'start' for 'idmap2d' from pid: 1090 (system_server)
[ 38.207696] healthd: battery l=100 v=4327 t=42.0 h=2 st=2 c=57 fc=4884000 cc=0 chg=u
[ 38.210216] healthd: battery l=100 v=4327 t=42.0 h=2 st=2 c=57 fc=4884000 cc=0 chg=u
[ 38.330246] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 38.330270] FG: resotre_bat_health: Read bat health file failed!
[ 39.360612] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 39.360637] FG: resotre_bat_health: Read bat health file failed!
[ 40.400247] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 40.400272] FG: resotre_bat_health: Read bat health file failed!
[ 40.830690] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 40.937105] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 40.937161] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 41.172702] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 41.172774] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 41.268525] init: Service 'vendor.camera-provider-2-4' (pid 1225) exited with status 1
[ 41.268551] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1225) process group...
[ 41.268746] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1225 in 0ms
[ 41.268878] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 41.269200] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 41.440754] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 41.440779] FG: resotre_bat_health: Read bat health file failed!
[ 42.480905] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 42.480949] FG: resotre_bat_health: Read bat health file failed!
[ 43.520658] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 43.520684] FG: resotre_bat_health: Read bat health file failed!
[ 44.561391] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 44.561415] FG: resotre_bat_health: Read bat health file failed!
[ 45.601365] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 45.601388] FG: resotre_bat_health: Read bat health file failed!
[ 45.841305] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 45.841849] init: starting service 'vendor.camera-provider-2-4'...
[ 45.952024] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 45.952125] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 46.187151] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 46.187217] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 46.650986] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 46.651026] FG: resotre_bat_health: Read bat health file failed!
[ 46.843770] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 46.953706] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 46.953766] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 47.190126] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 47.680904] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 47.680944] FG: resotre_bat_health: Read bat health file failed!
[ 48.720367] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 48.720393] FG: resotre_bat_health: Read bat health file failed!
[ 49.761382] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 49.761405] FG: resotre_bat_health: Read bat health file failed!
[ 50.801365] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 50.801388] FG: resotre_bat_health: Read bat health file failed!
[ 50.857353] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 50.962212] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 50.962267] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 51.199162] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 51.199220] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 51.274940] init: Service 'vendor.camera-provider-2-4' (pid 1261) exited with status 1
[ 51.274965] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1261) process group...
[ 51.275164] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1261 in 0ms
[ 51.275295] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 51.275666] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 51.850945] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 51.850986] FG: resotre_bat_health: Read bat health file failed!
[ 52.881005] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 52.881045] FG: resotre_bat_health: Read bat health file failed!
[ 53.920320] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 53.920345] FG: resotre_bat_health: Read bat health file failed!
[ 54.961395] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 54.961419] FG: resotre_bat_health: Read bat health file failed!
[ 55.869342] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 55.869870] init: starting service 'vendor.camera-provider-2-4'...
[ 55.971337] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 55.971397] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 56.010568] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 56.010606] FG: resotre_bat_health: Read bat health file failed!
[ 56.209026] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 56.209137] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 56.870388] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 56.972128] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 56.972184] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 57.040464] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 57.040487] FG: resotre_bat_health: Read bat health file failed!
[ 57.209542] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 58.090228] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 58.090254] FG: resotre_bat_health: Read bat health file failed!
[ 59.120797] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 59.120823] FG: resotre_bat_health: Read bat health file failed!
[ 60.170386] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 60.170412] FG: resotre_bat_health: Read bat health file failed!
[ 60.875589] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 60.976587] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 60.976643] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 61.200362] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 61.200385] FG: resotre_bat_health: Read bat health file failed!
[ 61.217335] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 61.217445] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 61.293370] init: Service 'vendor.camera-provider-2-4' (pid 1296) exited with status 1
[ 61.293396] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1296) process group...
[ 61.293644] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1296 in 0ms
[ 61.293777] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 61.294096] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 62.240630] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 62.240656] FG: resotre_bat_health: Read bat health file failed!
[ 63.281627] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 63.281665] FG: resotre_bat_health: Read bat health file failed!
[ 63.282196] type=1400 audit(29737477.999:466): avc: denied { search } for comm="kworker/4:2" name="user" dev="tmpfs" ino=12049 scontext=u:r:kernel:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=dir permissive=1
[ 63.282257] type=1400 audit(29737508.159:467): avc: denied { read } for comm="kworker/4:2" name="primary" dev="tmpfs" ino=12063 scontext=u:r:kernel:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 63.282514] type=1400 audit(29737508.159:467): avc: denied { read } for comm="kworker/4:2" name="primary" dev="tmpfs" ino=12063 scontext=u:r:kernel:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 63.282527] type=1400 audit(29737508.159:468): avc: denied { search } for comm="kworker/4:2" name="user" dev="tmpfs" ino=12049 scontext=u:r:kernel:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=dir permissive=1
[ 63.823483] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[ 64.320799] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 64.320825] FG: resotre_bat_health: Read bat health file failed!
[ 65.361457] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 65.361480] FG: resotre_bat_health: Read bat health file failed!
[ 65.623320] Watchdog bite received from modem software!
[ 65.623339] subsys-restart: subsystem_restart_dev(): Restart sequence requested for modem, restart_level = RELATED.
[ 65.623503] icnss: Modem went down, state: 0x400080, crashed: 2
[ 65.623568] IPA received MPSS BEFORE_SHUTDOWN
[ 65.627160] rmnet_ipa started deinitialization
[ 65.627164] ipa ipa2_teardown_sys_pipe:1519 bad parm.
[ 65.627173] ipa-wan ipa_wwan_remove:2224 Failed to teardown IPA->APPS pipe
[ 65.629623] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rmnet_ipa0
[ 65.672346] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rmnet_ipa0
[ 65.672463] ipa-wan ipa_del_dflt_wan_rt_tables:392 Deleting Route hdl:(0x9) with ip type: 0
[ 65.675899] ipa-wan ipa_del_dflt_wan_rt_tables:401 Deleting Route hdl:(0xb) with ip type: 1
[ 65.678596] rmnet_ipa completed deinitialization
[ 65.679328] IPA BEFORE_SHUTDOWN handling is complete
[ 65.679340] subsys-restart: subsystem_shutdown(): [kworker/u17:14:532]: Shutting down modem
[ 65.779442] pil-q6v5-mss 4080000.qcom,mss: Port 0000000000000000 halt timeout
[ 65.880129] pil-q6v5-mss 4080000.qcom,mss: Port 0000000000000000 halt timeout
[ 65.883327] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 65.884259] init: starting service 'vendor.camera-provider-2-4'...
[ 65.891696] IPA received MPSS AFTER_SHUTDOWN
[ 65.891713] ipa ipa_q6_post_shutdown_cleanup:2180 uC is not loaded, won't reset Q6 pipes
[ 65.891722] IPA AFTER_SHUTDOWN handling is complete
[ 65.891774] microdump_modem_notifier_nb: smem 421 not available
[ 65.891798] IPA received MPSS BEFORE_POWERUP
[ 65.892017] IPA BEFORE_POWERUP handling is complete
[ 65.892023] subsys-restart: subsystem_powerup(): [kworker/u17:14:532]: Powering up modem
[ 65.898208] ueventd: firmware: loading 'modem.mdt' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt'
[ 65.898957] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x000000008ac00000 to 0x0000000092200000
[ 65.899240] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt took 1ms
[ 65.988495] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 65.988840] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 65.995755] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[ 66.207326] ueventd: firmware: loading 'modem.b02' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b02'
[ 66.220308] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b02 took 13ms
[ 66.224094] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 66.224258] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 66.229431] ueventd: firmware: loading 'modem.b03' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b03'
[ 66.230820] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b03 took 2ms
[ 66.248160] ueventd: firmware: loading 'modem.b04' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b04'
[ 66.252559] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b04 took 5ms
[ 66.270896] ueventd: firmware: loading 'modem.b05' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b05'
[ 66.273727] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b05 took 3ms
[ 66.400389] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 66.400414] FG: resotre_bat_health: Read bat health file failed!
[ 66.886331] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 66.988358] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 66.988545] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 67.225432] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 67.358353] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[ 67.440567] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 67.440591] FG: resotre_bat_health: Read bat health file failed!
[ 67.483635] Received stop ack interrupt from modem
[ 67.483664] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[ 67.485292] IPA received MPSS AFTER_POWERUP
[ 67.485856] rmnet_ipa started initialization
[ 67.485859] IPA SSR support = True
[ 67.485861] IPA ipa-loaduC = False
[ 67.485864] IPA SG support = True
[ 67.485867] IPA Napi Enable = True
[ 67.485870] using default for wan-rx-desc-size = 1024
[ 67.486354] qrtr: Modem QMI Readiness RX cmd:0x2 node[0x0]
[ 67.489437] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 67.489455] mdss_dp_probe: Error usbpd setup!
[ 67.490156] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 67.495585] rmnet_ipa completed initialization
[ 67.496526] IPA AFTER_POWERUP handling is complete
[ 67.496569] subsys-restart: subsystem_restart_wq_func(): [kworker/u17:14:532]: Restart sequence for modem completed.
[ 67.499340] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 67.499349] mdss_dp_probe: Error usbpd setup!
[ 67.499910] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 68.481037] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 68.481080] FG: resotre_bat_health: Read bat health file failed!
[ 69.520749] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 69.520775] FG: resotre_bat_health: Read bat health file failed!
[ 70.561385] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 70.561408] FG: resotre_bat_health: Read bat health file failed!
[ 70.991448] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 70.991503] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 71.228156] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 71.228211] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 71.302716] init: Service 'vendor.camera-provider-2-4' (pid 1365) exited with status 1
[ 71.302742] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1365) process group...
[ 71.302934] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1365 in 0ms
[ 71.303075] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 71.303438] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 71.303858] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 71.601368] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 71.601391] FG: resotre_bat_health: Read bat health file failed!
[ 72.650975] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 72.651016] FG: resotre_bat_health: Read bat health file failed!
[ 73.681040] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 73.681092] FG: resotre_bat_health: Read bat health file failed!
[ 74.720165] [BAT][CHG]enter asus_min_monitor_work
[ 74.720217] [BAT][CHG]enter jeita_rule
[ 74.720294] [BAT][CHG]jeita_rule Read fast CC=0x64,USBIN_ICL_reg=0x1
[ 74.720309] [BAT][CHG]enter asus_get_prop_batt_health--> smblib_get_prop_batt_health
[ 74.720334] [BAT][CHG]enter asus_get_batt_health bat_health=1
[ 74.720346] [BAT][CHG]jeita_rule bat_health=0
[ 74.720454] [BAT][CHG]enter smbchg_jeita_judge_state old_state=3
[ 74.720465] [BAT][CHG]end smbchg_jeita_judge_state result_State=3
[ 74.720487] [BAT][CHG]jeita_rule: state=3,batt_health = GOOD, bat_temp = 420, bat_volt = 4342274, bat_capacity=100,ICL = 0x14, FV_reg=0x73, Countrycode 0
[ 74.720498] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 74.720508] FG: resotre_bat_health: Read bat health file failed!
[ 74.720524] [BAT][CHG]jeita_rule: 10 <= temperature < 45
[ 74.720547] [BAT][CHG]enter SW_recharge termination_reg=0x3
[ 74.720605] [BAT][CHG]\x013[BAT][CHG]SW_recharge: bat_capacity = 100, termination_reg = 0x3
[ 74.720627] [BAT][CHG]enter asus_min_monitor_work--> asus_get_prop_usb_present
[ 74.720643] [BAT][CHG]end asus_min_monitor_work
[ 74.720653] [BAT][CHG]asus_smblib_relax: ASUS set smblib_relax
[ 74.720670] [BAT][CHG][BAT][CHG] asus_batt_RTC_work: alarm start after 60s
[ 75.761375] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 75.761398] FG: resotre_bat_health: Read bat health file failed!
[ 76.233414] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 76.233476] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 76.800584] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 76.800607] FG: resotre_bat_health: Read bat health file failed!
[ 76.896120] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 76.997831] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 76.997887] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 77.234405] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 77.234466] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 77.319936] init: Service 'vendor.camera-provider-2-4' (pid 1386) exited with status 1
[ 77.319963] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1386) process group...
[ 77.320376] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1386 in 0ms
[ 77.850919] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 77.850968] FG: resotre_bat_health: Read bat health file failed!
[ 78.880859] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 78.880898] FG: resotre_bat_health: Read bat health file failed!
[ 79.920499] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 79.920525] FG: resotre_bat_health: Read bat health file failed!
[ 80.491204] healthd: battery l=100 v=4342 t=42.0 h=2 st=2 c=155 fc=4884000 cc=0 chg=u
[ 80.961473] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 80.961497] FG: resotre_bat_health: Read bat health file failed!
[ 81.298795] init: Service 'vendor.camera-provider-2-4' (pid 1400) exited with status 1
[ 81.298820] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1400) process group...
[ 81.299103] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1400 in 0ms
[ 81.299241] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 81.299874] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 81.300482] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 81.901400] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 81.901923] init: starting service 'vendor.camera-provider-2-4'...
[ 82.000336] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 82.000359] FG: resotre_bat_health: Read bat health file failed!
[ 82.003244] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 82.003303] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 83.040392] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 83.040415] FG: resotre_bat_health: Read bat health file failed!
[ 84.080605] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 84.080645] FG: resotre_bat_health: Read bat health file failed!
[ 85.120580] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 85.120605] FG: resotre_bat_health: Read bat health file failed!
[ 86.170281] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 86.170306] FG: resotre_bat_health: Read bat health file failed!
[ 86.909219] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 87.010532] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 87.010590] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 87.200580] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 87.200603] FG: resotre_bat_health: Read bat health file failed!
[ 87.246519] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 87.246637] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 87.350369] init: Service 'vendor.camera-provider-2-4' (pid 1421) exited with status 1
[ 87.350405] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1421) process group...
[ 87.350885] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1421 in 0ms
[ 87.351109] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 87.351689] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 88.240317] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 88.240345] FG: resotre_bat_health: Read bat health file failed!
[ 89.290227] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 89.290253] FG: resotre_bat_health: Read bat health file failed!
[ 90.320655] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 90.320679] FG: resotre_bat_health: Read bat health file failed!
[ 91.360897] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 91.360936] FG: resotre_bat_health: Read bat health file failed!
[ 91.918032] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 91.918577] init: starting service 'vendor.camera-provider-2-4'...
[ 92.017211] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 92.017283] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 92.028440] init: Untracked pid 1476 exited with status 0
[ 92.042876] init: Untracked pid 1478 exited with status 0
[ 92.200378] init: Untracked pid 1482 exited with status 0
[ 92.207430] init: Untracked pid 1484 exited with status 0
[ 92.253099] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 92.253155] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 92.400861] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 92.400884] FG: resotre_bat_health: Read bat health file failed!
[ 92.401149] type=1400 audit(29737508.159:468): avc: denied { search } for comm="kworker/4:2" name="user" dev="tmpfs" ino=12049 scontext=u:r:kernel:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=dir permissive=1
[ 92.401179] type=1400 audit(29737537.279:469): avc: denied { read } for comm="kworker/4:2" name="primary" dev="tmpfs" ino=12063 scontext=u:r:kernel:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 93.450790] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 93.450837] FG: resotre_bat_health: Read bat health file failed!
[ 94.481163] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 94.481206] FG: resotre_bat_health: Read bat health file failed!
[ 95.530624] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 95.530648] FG: resotre_bat_health: Read bat health file failed!
[ 96.560583] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 96.560607] FG: resotre_bat_health: Read bat health file failed!
[ 96.924089] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 97.023200] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 97.023256] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 97.259979] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 97.260122] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 97.329314] init: Service 'vendor.camera-provider-2-4' (pid 1538) exited with status 1
[ 97.329340] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1538) process group...
[ 97.329533] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1538 in 0ms
[ 97.329666] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 97.330241] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 97.601353] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 97.601376] FG: resotre_bat_health: Read bat health file failed!
[ 98.640636] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 98.640659] FG: resotre_bat_health: Read bat health file failed!
[ 99.681121] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 99.681161] FG: resotre_bat_health: Read bat health file failed!
[ 100.720563] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 100.720588] FG: resotre_bat_health: Read bat health file failed!
[ 101.760585] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 101.760609] FG: resotre_bat_health: Read bat health file failed!
[ 102.028487] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 102.028547] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 102.265490] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 102.265551] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 102.801357] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 102.801380] FG: resotre_bat_health: Read bat health file failed!
[ 102.930106] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 103.029120] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 103.029178] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 103.266176] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 103.266235] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 103.321613] init: Service 'vendor.camera-provider-2-4' (pid 1559) exited with status 1
[ 103.840631] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 103.840655] FG: resotre_bat_health: Read bat health file failed!
[ 104.880888] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 104.880940] FG: resotre_bat_health: Read bat health file failed!
[ 105.921541] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 105.921564] FG: resotre_bat_health: Read bat health file failed!
[ 106.960570] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 106.960594] FG: resotre_bat_health: Read bat health file failed!
[ 107.033176] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 107.033234] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 107.270360] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 107.270416] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 107.339901] init: Service 'vendor.camera-provider-2-4' (pid 1573) exited with status 1
[ 107.339926] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1573) process group...
[ 107.340200] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1573 in 0ms
[ 107.340329] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 107.340664] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 107.341068] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 107.509276] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[ 108.000619] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 108.000644] FG: resotre_bat_health: Read bat health file failed!
[ 109.051025] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 109.051071] FG: resotre_bat_health: Read bat health file failed!
[ 109.309379] Watchdog bite received from modem software!
[ 109.309398] subsys-restart: subsystem_restart_dev(): Restart sequence requested for modem, restart_level = RELATED.
[ 109.309562] icnss: Modem went down, state: 0x404080, crashed: 2
[ 109.309869] IPA received MPSS BEFORE_SHUTDOWN
[ 109.312197] rmnet_ipa started deinitialization
[ 109.312202] ipa ipa2_teardown_sys_pipe:1519 bad parm.
[ 109.312212] ipa-wan ipa_wwan_remove:2224 Failed to teardown IPA->APPS pipe
[ 109.318582] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rmnet_ipa0
[ 109.360918] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rmnet_ipa0
[ 109.361043] ipa-wan ipa_del_dflt_wan_rt_tables:392 Deleting Route hdl:(0x9) with ip type: 0
[ 109.362419] ipa-wan ipa_del_dflt_wan_rt_tables:401 Deleting Route hdl:(0xb) with ip type: 1
[ 109.365241] rmnet_ipa completed deinitialization
[ 109.365461] IPA BEFORE_SHUTDOWN handling is complete
[ 109.365468] subsys-restart: subsystem_shutdown(): [kworker/u17:14:532]: Shutting down modem
[ 109.465510] pil-q6v5-mss 4080000.qcom,mss: Port 0000000000000000 halt timeout
[ 109.565575] pil-q6v5-mss 4080000.qcom,mss: Port 0000000000000000 halt timeout
[ 109.572311] IPA received MPSS AFTER_SHUTDOWN
[ 109.572327] ipa ipa_q6_post_shutdown_cleanup:2180 uC is not loaded, won't reset Q6 pipes
[ 109.572335] IPA AFTER_SHUTDOWN handling is complete
[ 109.572390] microdump_modem_notifier_nb: smem 421 not available
[ 109.572411] IPA received MPSS BEFORE_POWERUP
[ 109.572618] IPA BEFORE_POWERUP handling is complete
[ 109.572624] subsys-restart: subsystem_powerup(): [kworker/u17:14:532]: Powering up modem
[ 109.584007] ueventd: firmware: loading 'modem.mdt' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt'
[ 109.585307] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x000000008ac00000 to 0x0000000092200000
[ 109.586078] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt took 2ms
[ 109.682223] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[ 109.898429] ueventd: firmware: loading 'modem.b02' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b02'
[ 109.904236] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b02 took 6ms
[ 109.916359] ueventd: firmware: loading 'modem.b03' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b03'
[ 109.921456] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b03 took 5ms
[ 109.937282] ueventd: firmware: loading 'modem.b04' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b04'
[ 109.941299] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b04 took 4ms
[ 109.965179] ueventd: firmware: loading 'modem.b05' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b05'
[ 109.970734] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b05 took 6ms
[ 110.080304] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 110.080333] FG: resotre_bat_health: Read bat health file failed!
[ 111.042219] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[ 111.121587] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 111.121610] FG: resotre_bat_health: Read bat health file failed!
[ 111.167599] Received stop ack interrupt from modem
[ 111.167617] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[ 111.173371] IPA received MPSS AFTER_POWERUP
[ 111.174234] rmnet_ipa started initialization
[ 111.174245] IPA SSR support = True
[ 111.174252] IPA ipa-loaduC = False
[ 111.174261] IPA SG support = True
[ 111.174270] IPA Napi Enable = True
[ 111.174281] using default for wan-rx-desc-size = 1024
[ 111.175167] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 111.175178] mdss_dp_probe: Error usbpd setup!
[ 111.175753] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 111.176909] qrtr: Modem QMI Readiness RX cmd:0x2 node[0x0]
[ 111.179930] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 111.179937] mdss_dp_probe: Error usbpd setup!
[ 111.180690] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 111.188141] rmnet_ipa completed initialization
[ 111.193143] IPA AFTER_POWERUP handling is complete
[ 111.193814] subsys-restart: subsystem_restart_wq_func(): [kworker/u17:14:532]: Restart sequence for modem completed.
[ 111.202570] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 111.202597] mdss_dp_probe: Error usbpd setup!
[ 111.204931] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 112.161460] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 112.161497] FG: resotre_bat_health: Read bat health file failed!
[ 112.275419] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 112.275476] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 112.941380] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 113.039946] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 113.040001] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 113.200715] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 113.200746] FG: resotre_bat_health: Read bat health file failed!
[ 113.276507] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 113.276563] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 113.325368] init: Service 'vendor.camera-provider-2-4' (pid 1625) exited with status 1
[ 113.325397] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1625) process group...
[ 113.325609] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1625 in 0ms
[ 114.240606] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 114.240631] FG: resotre_bat_health: Read bat health file failed!
[ 115.281362] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 115.281387] FG: resotre_bat_health: Read bat health file failed!
[ 116.320759] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 116.320783] FG: resotre_bat_health: Read bat health file failed!
[ 117.280444] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 117.280500] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 117.338191] init: Service 'vendor.camera-provider-2-4' (pid 1639) exited with status 1
[ 117.338216] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1639) process group...
[ 117.338404] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1639 in 0ms
[ 117.338530] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 117.338834] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 117.339245] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 117.360564] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 117.360587] FG: resotre_bat_health: Read bat health file failed!
[ 117.946341] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 117.946857] init: starting service 'vendor.camera-provider-2-4'...
[ 118.400698] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 118.400729] FG: resotre_bat_health: Read bat health file failed!
[ 119.440617] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 119.440643] FG: resotre_bat_health: Read bat health file failed!
[ 120.481364] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 120.481389] FG: resotre_bat_health: Read bat health file failed!
[ 121.521580] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 121.521603] FG: resotre_bat_health: Read bat health file failed!
[ 122.560645] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 122.560675] FG: resotre_bat_health: Read bat health file failed!
[ 122.951755] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 123.049786] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 123.049843] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 123.286876] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 123.286933] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 123.359558] init: Service 'vendor.camera-provider-2-4' (pid 1660) exited with status 1
[ 123.359591] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1660) process group...
[ 123.359916] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1660 in 0ms
[ 123.360576] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 123.361262] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 123.600909] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 123.600936] FG: resotre_bat_health: Read bat health file failed!
[ 124.640319] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 124.640344] FG: resotre_bat_health: Read bat health file failed!
[ 125.681363] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 125.681388] FG: resotre_bat_health: Read bat health file failed!
[ 126.730390] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 126.730430] FG: resotre_bat_health: Read bat health file failed!
[ 127.760780] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 127.760804] FG: resotre_bat_health: Read bat health file failed!
[ 127.887301] [BAT][CHG]smblib_handle_apsd_done--> smblib_force_legacy_icl has done
[ 127.970601] init: Untracked pid 1703 exited with status 0
[ 127.974422] init: Untracked pid 1705 exited with status 0
[ 128.001349] status_change_work chip->charge_done=0
[ 128.001855] enter fg_charge_full_update recharge_soc=250
[ 128.002284] enter fg_charge_full_update msoc_raw=255
[ 128.002287] enter fg_charge_full_update msoc: 100 bsoc: ff84
[ 128.003913] healthd: battery l=100 v=4340 t=42.0 h=2 st=2 c=111 fc=4884000 cc=0 chg=u
[ 128.055880] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 128.055947] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 128.244278] healthd: battery l=100 v=4340 t=42.0 h=2 st=2 c=111 fc=4884000 cc=0 chg=u
[ 128.299217] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 128.299278] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 128.800918] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 128.800941] FG: resotre_bat_health: Read bat health file failed!
[ 128.801243] type=1400 audit(29737572.639:470): avc: denied { read } for comm="kworker/4:2" name="primary" dev="tmpfs" ino=12063 scontext=u:r:kernel:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 128.801276] type=1400 audit(29737573.679:471): avc: denied { search } for comm="kworker/4:2" name="user" dev="tmpfs" ino=12049 scontext=u:r:kernel:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=dir permissive=1
[ 128.845295] init: Untracked pid 1712 exited with status 0
[ 128.851691] init: Untracked pid 1714 exited with status 0
[ 128.920242] init: Untracked pid 1717 exited with status 0
[ 128.921695] init: Untracked pid 1719 exited with status 0
[ 129.840629] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 129.840654] FG: resotre_bat_health: Read bat health file failed!
[ 130.880630] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 130.880655] FG: resotre_bat_health: Read bat health file failed!
[ 131.920566] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 131.920594] FG: resotre_bat_health: Read bat health file failed!
[ 132.960591] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 132.960615] FG: resotre_bat_health: Read bat health file failed!
[ 133.072462] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 133.072519] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 133.311096] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 133.311152] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 133.451576] init: Service 'vendor.camera-provider-2-4' (pid 1767) exited with status 1
[ 133.451602] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1767) process group...
[ 133.451804] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1767 in 0ms
[ 133.451934] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 133.452241] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 133.452555] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 134.000999] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 134.001037] FG: resotre_bat_health: Read bat health file failed!
[ 134.114372] [BAT][CHG]batAlarm_handler: batAlarm triggered
[ 135.040746] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 135.040771] FG: resotre_bat_health: Read bat health file failed!
[ 136.080608] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 136.080633] FG: resotre_bat_health: Read bat health file failed!
[ 136.160958] [BAT][CHG]enter asus_min_monitor_work
[ 136.161069] [BAT][CHG]enter jeita_rule
[ 136.161169] [BAT][CHG]jeita_rule Read fast CC=0x64,USBIN_ICL_reg=0x1
[ 136.161183] [BAT][CHG]enter asus_get_prop_batt_health--> smblib_get_prop_batt_health
[ 136.161210] [BAT][CHG]enter asus_get_batt_health bat_health=1
[ 136.161224] [BAT][CHG]jeita_rule bat_health=0
[ 136.161368] [BAT][CHG]enter smbchg_jeita_judge_state old_state=3
[ 136.161381] [BAT][CHG]end smbchg_jeita_judge_state result_State=3
[ 136.161411] [BAT][CHG]jeita_rule: state=3,batt_health = GOOD, bat_temp = 420, bat_volt = 4347645, bat_capacity=100,ICL = 0x14, FV_reg=0x73, Countrycode 0
[ 136.161427] [BAT][CHG]jeita_rule: 10 <= temperature < 45
[ 136.161454] [BAT][CHG]enter SW_recharge termination_reg=0x3
[ 136.161516] [BAT][CHG]\x013[BAT][CHG]SW_recharge: bat_capacity = 100, termination_reg = 0x3
[ 136.161544] [BAT][CHG]enter asus_min_monitor_work--> asus_get_prop_usb_present
[ 136.161578] [BAT][CHG]end asus_min_monitor_work
[ 136.161590] [BAT][CHG]asus_smblib_relax: ASUS set smblib_relax
[ 136.161612] [BAT][CHG][BAT][CHG] asus_batt_RTC_work: alarm start after 60s
[ 137.121360] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 137.121383] FG: resotre_bat_health: Read bat health file failed!
[ 138.161076] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 138.161120] FG: resotre_bat_health: Read bat health file failed!
[ 138.190018] sysrq: SysRq : Show Blocked State
[ 138.190139] task PC stack pid father
[ 138.190331] mdss_dsi_event D 0 173 2 0x00000000
[ 138.190351] Call trace:
[ 138.190393] __switch_to+0x110/0x12c
[ 138.190421] __schedule+0x720/0x938
[ 138.190434] schedule+0x70/0x90
[ 138.190459] dsi_event_thread+0xc4/0x32c
[ 138.190477] kthread+0x114/0x124
[ 138.190491] ret_from_fork+0x10/0x18
[ 138.190841] mmc-cmdqd/0 D 0 363 2 0x00000000
[ 138.190859] Call trace:
[ 138.190873] __switch_to+0x110/0x12c
[ 138.190888] __schedule+0x720/0x938
[ 138.190900] schedule+0x70/0x90
[ 138.190923] mmc_cmdq_thread+0x17c/0x1f4
[ 138.190936] kthread+0x114/0x124
[ 138.190948] ret_from_fork+0x10/0x18
[ 138.191362] mdss_fb0 D 0 645 2 0x00000000
[ 138.191378] Call trace:
[ 138.191398] __switch_to+0x110/0x12c
[ 138.191414] __schedule+0x720/0x938
[ 138.191427] schedule+0x70/0x90
[ 138.191450] __mdss_fb_display_thread+0xe8/0x510
[ 138.191465] kthread+0x114/0x124
[ 138.191477] ret_from_fork+0x10/0x18
[ 138.193971] sysrq: SysRq : Show backtrace of all active CPUs
[ 138.194244] sysrq: CPU6:
[ 138.194253] Call trace:
[ 138.194286] dump_backtrace+0x0/0x1c0
[ 138.194302] show_stack+0x14/0x1c
[ 138.194319] showacpu+0x58/0x70
[ 138.194340] flush_smp_call_function_queue+0xd4/0x15c
[ 138.194356] generic_smp_call_function_single_interrupt+0x10/0x18
[ 138.194368] handle_IPI+0x14c/0x288
[ 138.194379] gic_handle_irq+0xf0/0x1a0
[ 138.194388] el1_irq+0xe8/0x18c
[ 138.194404] __clean_dcache_area_poc+0x2c/0x38
[ 138.194422] msm_dma_map_sg_attrs+0x394/0x5c4
[ 138.194445] ion_map_dma_buf+0x214/0x26c
[ 138.194467] dma_buf_map_attachment+0x20/0x40
[ 138.194484] mdss_mdp_data_get_and_validate_size+0x2d8/0x5f8
[ 138.194502] mdss_mdp_layer_pre_commit+0x394/0x68c
[ 138.194515] mdss_fb_atomic_commit+0x138/0x324
[ 138.194527] mdss_fb_do_ioctl+0x1050/0x207c
[ 138.194539] mdss_fb_ioctl+0x18/0x28
[ 138.194560] do_fb_ioctl+0x1b8/0x754
[ 138.194572] fb_ioctl+0x40/0x48
[ 138.194593] do_vfs_ioctl+0x554/0xd20
[ 138.194607] SyS_ioctl+0x88/0x94
[ 138.194620] el0_svc_naked+0x34/0x38
[ 138.194634] sysrq: CPU5:
[ 138.194643] Call trace:
[ 138.194665] dump_backtrace+0x0/0x1c0
[ 138.194681] show_stack+0x14/0x1c
[ 138.194693] showacpu+0x58/0x70
[ 138.194712] flush_smp_call_function_queue+0xd4/0x15c
[ 138.194728] generic_smp_call_function_single_interrupt+0x10/0x18
[ 138.194742] handle_IPI+0x14c/0x288
[ 138.194752] gic_handle_irq+0xf0/0x1a0
[ 138.194762] el0_irq_naked+0x4c/0x54
[ 138.315960] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 138.316019] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 138.377324] type=1400 audit(29737573.679:471): avc: denied { search } for comm="kworker/4:2" name="user" dev="tmpfs" ino=12049 scontext=u:r:kernel:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=dir permissive=1
[ 138.377353] type=1400 audit(29737583.249:472): avc: denied { kill } for comm="main" capability=5 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=1
[ 138.412629] init: Service 'zygote' (pid 582) received signal 9
[ 138.412656] init: Sending signal 9 to service 'zygote' (pid 582) process group...
[ 138.412937] libprocessgroup: Successfully killed process cgroup uid 0 pid 582 in 0ms
[ 138.414966] init: Command 'write /sys/power/state on' action=onrestart (<Service 'zygote' onrestart>:2) took 0ms and failed: Unable to write to file '/sys/power/state': Unable to write file contents: Invalid argument
[ 138.415001] init: Sending signal 9 to service 'audioserver' (pid 677) process group...
[ 138.420868] libprocessgroup: Successfully killed process cgroup uid 1041 pid 677 in 5ms
[ 138.421810] init: Sending signal 9 to service 'cameraserver' (pid 781) process group...
[ 138.428083] libprocessgroup: Successfully killed process cgroup uid 1047 pid 781 in 6ms
[ 139.201519] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 139.201556] FG: resotre_bat_health: Read bat health file failed!
[ 139.201582] type=1400 audit(29737583.249:472): avc: denied { kill } for comm="main" capability=5 scontext=u:r:zygote:s0 tcontext=u:r:zygote:s0 tclass=capability permissive=1
[ 139.201620] type=1400 audit(29737584.079:473): avc: denied { read } for comm="kworker/4:2" name="primary" dev="tmpfs" ino=12063 scontext=u:r:kernel:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 139.201923] type=1400 audit(29737584.079:473): avc: denied { read } for comm="kworker/4:2" name="primary" dev="tmpfs" ino=12063 scontext=u:r:kernel:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 139.201940] type=1400 audit(29737584.079:474): avc: denied { search } for comm="kworker/4:2" name="user" dev="tmpfs" ino=12049 scontext=u:r:kernel:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=dir permissive=1
[ 140.240590] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 140.240614] FG: resotre_bat_health: Read bat health file failed!
[ 140.491456] healthd: battery l=100 v=4345 t=42.0 h=2 st=2 c=158 fc=4884000 cc=0 chg=u
[ 141.281383] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 141.281407] FG: resotre_bat_health: Read bat health file failed!
[ 142.321347] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 142.321372] FG: resotre_bat_health: Read bat health file failed!
[ 143.361021] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 143.361063] FG: resotre_bat_health: Read bat health file failed!
[ 143.476927] init: starting service 'zygote'...
[ 143.481546] init: starting service 'audioserver'...
[ 143.485448] init: Created socket '/dev/socket/zygote', mode 660, user 0, group 1000
[ 143.486004] init: Created socket '/dev/socket/usap_pool_primary', mode 660, user 0, group 1000
[ 143.486609] init: starting service 'cameraserver'...
[ 143.503585] init: starting service 'media'...
[ 143.518862] init: starting service 'netd'...
[ 143.536117] init: Created socket '/dev/socket/dnsproxyd', mode 660, user 0, group 3003
[ 143.538296] init: starting service 'wificond'...
[ 143.538309] init: Created socket '/dev/socket/mdns', mode 660, user 0, group 1000
[ 143.727948] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ipsec_test
[ 143.800563] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister ipsec_test
[ 144.410581] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 144.410629] FG: resotre_bat_health: Read bat health file failed!
[ 145.452160] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 145.452188] FG: resotre_bat_health: Read bat health file failed!
[ 145.452446] type=1400 audit(29737584.079:474): avc: denied { search } for comm="kworker/4:2" name="user" dev="tmpfs" ino=12049 scontext=u:r:kernel:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=dir permissive=1
[ 145.452489] type=1400 audit(29737590.329:475): avc: denied { read } for comm="kworker/4:2" name="primary" dev="tmpfs" ino=12063 scontext=u:r:kernel:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1
[ 146.485089] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 146.485117] FG: resotre_bat_health: Read bat health file failed!
[ 147.520645] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 147.520674] FG: resotre_bat_health: Read bat health file failed!
[ 148.519070] init: Service 'vendor.camera-provider-2-4' (pid 1862) exited with status 1
[ 148.519106] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1862) process group...
[ 148.519366] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1862 in 0ms
[ 148.519518] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 148.520216] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 148.520579] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 148.560895] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 148.560921] FG: resotre_bat_health: Read bat health file failed!
[ 149.091828] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 149.092304] init: starting service 'vendor.camera-provider-2-4'...
[ 149.600757] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 149.600782] FG: resotre_bat_health: Read bat health file failed!
[ 150.090467] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 150.503609] init: Service 'vendor.camera-provider-2-4' (pid 1883) exited with status 1
[ 150.640804] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 150.640843] FG: resotre_bat_health: Read bat health file failed!
[ 151.192587] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[ 151.690805] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 151.690828] FG: resotre_bat_health: Read bat health file failed!
[ 152.730607] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 152.730630] FG: resotre_bat_health: Read bat health file failed!
[ 152.992547] Watchdog bite received from modem software!
[ 152.992569] subsys-restart: subsystem_restart_dev(): Restart sequence requested for modem, restart_level = RELATED.
[ 152.992691] icnss: Modem went down, state: 0x404080, crashed: 2
[ 152.993013] IPA received MPSS BEFORE_SHUTDOWN
[ 152.996494] rmnet_ipa started deinitialization
[ 152.996505] ipa ipa2_teardown_sys_pipe:1519 bad parm.
[ 152.996530] ipa-wan ipa_wwan_remove:2224 Failed to teardown IPA->APPS pipe
[ 152.998239] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rmnet_ipa0
[ 153.060320] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister rmnet_ipa0
[ 153.060580] ipa-wan ipa_del_dflt_wan_rt_tables:392 Deleting Route hdl:(0x9) with ip type: 0
[ 153.063538] ipa-wan ipa_del_dflt_wan_rt_tables:401 Deleting Route hdl:(0xb) with ip type: 1
[ 153.066924] rmnet_ipa completed deinitialization
[ 153.067738] IPA BEFORE_SHUTDOWN handling is complete
[ 153.067756] subsys-restart: subsystem_shutdown(): [kworker/u17:14:532]: Shutting down modem
[ 153.167817] pil-q6v5-mss 4080000.qcom,mss: Port 0000000000000000 halt timeout
[ 153.267947] pil-q6v5-mss 4080000.qcom,mss: Port 0000000000000000 halt timeout
[ 153.279375] IPA received MPSS AFTER_SHUTDOWN
[ 153.279434] ipa ipa_q6_post_shutdown_cleanup:2180 uC is not loaded, won't reset Q6 pipes
[ 153.279458] IPA AFTER_SHUTDOWN handling is complete
[ 153.279561] microdump_modem_notifier_nb: smem 421 not available
[ 153.279622] IPA received MPSS BEFORE_POWERUP
[ 153.280216] IPA BEFORE_POWERUP handling is complete
[ 153.280230] subsys-restart: subsystem_powerup(): [kworker/u17:14:532]: Powering up modem
[ 153.294835] ueventd: firmware: loading 'modem.mdt' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt'
[ 153.296693] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x000000008ac00000 to 0x0000000092200000
[ 153.298824] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt took 4ms
[ 153.393689] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[ 153.760598] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 153.760621] FG: resotre_bat_health: Read bat health file failed!
[ 153.834675] ueventd: firmware: loading 'modem.b02' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b02'
[ 153.841358] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b02 took 7ms
[ 153.852316] ueventd: firmware: loading 'modem.b03' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b03'
[ 153.861235] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b03 took 9ms
[ 153.870967] ueventd: firmware: loading 'modem.b04' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b04'
[ 153.880595] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b04 took 10ms
[ 153.889645] ueventd: firmware: loading 'modem.b05' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.b05'
[ 153.892004] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.b05 took 2ms
[ 154.094955] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 154.500231] init: Service 'vendor.camera-provider-2-4' (pid 1932) exited with status 1
[ 154.500259] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 1932) process group...
[ 154.500459] libprocessgroup: Successfully killed process cgroup uid 1047 pid 1932 in 0ms
[ 154.500593] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 154.500930] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 154.501239] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 154.810192] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 154.810218] FG: resotre_bat_health: Read bat health file failed!
[ 154.943679] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[ 155.068973] Received stop ack interrupt from modem
[ 155.068988] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[ 155.072550] IPA received MPSS AFTER_POWERUP
[ 155.073030] rmnet_ipa started initialization
[ 155.073039] IPA SSR support = True
[ 155.073046] IPA ipa-loaduC = False
[ 155.073052] IPA SG support = True
[ 155.073059] IPA Napi Enable = True
[ 155.073068] using default for wan-rx-desc-size = 1024
[ 155.075497] qrtr: Modem QMI Readiness RX cmd:0x2 node[0x0]
[ 155.079883] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 155.079903] mdss_dp_probe: Error usbpd setup!
[ 155.082811] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 155.094442] rmnet_ipa completed initialization
[ 155.095839] IPA AFTER_POWERUP handling is complete
[ 155.095947] subsys-restart: subsystem_restart_wq_func(): [kworker/u17:14:532]: Restart sequence for modem completed.
[ 155.096466] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 155.096896] init: starting service 'vendor.camera-provider-2-4'...
[ 155.109807] mdss_dp_usbpd_setup: get_usbpd phandle failed (-19)
[ 155.109835] mdss_dp_probe: Error usbpd setup!
[ 155.111977] pmic_analog_codec 800f000.qcom,spmi:qcom,pm660l@3:anlg-cdc@f000: Adsp is not loaded yet 0
[ 155.840499] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 155.840523] FG: resotre_bat_health: Read bat health file failed!
[ 156.097148] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 156.880458] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 156.880482] FG: resotre_bat_health: Read bat health file failed!
[ 157.920544] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 157.920568] FG: resotre_bat_health: Read bat health file failed!
[ 158.585962] healthd: battery l=100 v=4337 t=42.0 h=2 st=2 c=89 fc=4884000 cc=0 chg=u
[ 158.590766] healthd: battery l=100 v=4337 t=42.0 h=2 st=2 c=89 fc=4884000 cc=0 chg=u
[ 158.970378] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 158.970401] FG: resotre_bat_health: Read bat health file failed!
[ 159.100649] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 159.101257] init: starting service 'vendor.camera-provider-2-4'...
[ 159.312354] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 159.312416] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 159.313978] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 159.314028] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 159.558831] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 159.558886] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 160.000929] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 160.000952] FG: resotre_bat_health: Read bat health file failed!
[ 160.001249] type=1400 audit(29737603.849:477): avc: denied { read } for comm="kworker/4:2" name="primary" dev="tmpfs" ino=12063 scontext=u:r:kernel:s0 tcontext=u:object_r:storage_file:s0 tclass=lnk_file permissive=1 duplicate messages suppressed
[ 160.001276] type=1400 audit(29737604.879:478): avc: denied { search } for comm="kworker/4:2" name="user" dev="tmpfs" ino=12049 scontext=u:r:kernel:s0 tcontext=u:object_r:mnt_user_file:s0 tclass=dir permissive=1
[ 160.101489] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 160.316303] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 161.040550] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 161.040574] FG: resotre_bat_health: Read bat health file failed!
[ 162.081370] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 162.081395] FG: resotre_bat_health: Read bat health file failed!
[ 163.121293] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 163.121317] FG: resotre_bat_health: Read bat health file failed!
[ 164.161366] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 164.161389] FG: resotre_bat_health: Read bat health file failed!
[ 164.323496] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 164.323554] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 164.472314] init: Service 'vendor.camera-provider-2-4' (pid 2031) exited with status 1
[ 164.472341] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 2031) process group...
[ 164.472538] libprocessgroup: Successfully killed process cgroup uid 1047 pid 2031 in 0ms
[ 164.472670] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 164.473123] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 164.473553] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 164.563457] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 164.563518] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 165.200571] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 165.200595] FG: resotre_bat_health: Read bat health file failed!
[ 166.240567] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 166.240589] FG: resotre_bat_health: Read bat health file failed!
[ 167.280506] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 167.280529] FG: resotre_bat_health: Read bat health file failed!
[ 168.321376] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 168.321400] FG: resotre_bat_health: Read bat health file failed!
[ 169.331004] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 169.331064] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 169.360468] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 169.360491] FG: resotre_bat_health: Read bat health file failed!
[ 169.568574] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 169.568631] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 170.115202] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 170.330496] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 170.330552] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 170.401361] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 170.401385] FG: resotre_bat_health: Read bat health file failed!
[ 170.496490] init: Service 'vendor.camera-provider-2-4' (pid 2052) exited with status 1
[ 170.496516] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 2052) process group...
[ 170.496728] libprocessgroup: Successfully killed process cgroup uid 1047 pid 2052 in 0ms
[ 171.440490] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 171.440513] FG: resotre_bat_health: Read bat health file failed!
[ 172.481366] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 172.481391] FG: resotre_bat_health: Read bat health file failed!
[ 173.521349] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 173.521373] FG: resotre_bat_health: Read bat health file failed!
[ 174.468877] init: Service 'vendor.camera-provider-2-4' (pid 2066) exited with status 1
[ 174.468901] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 2066) process group...
[ 174.469093] libprocessgroup: Successfully killed process cgroup uid 1047 pid 2066 in 0ms
[ 174.469238] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 174.470193] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 174.470652] init: Unable to set property 'ro.init.updatable_crashing' to '1' from uid:0 gid:0 pid:1: Read-only property was already set
[ 174.561369] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 174.561393] FG: resotre_bat_health: Read bat health file failed!
[ 174.573289] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 174.573352] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 175.119748] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 175.120382] init: starting service 'vendor.camera-provider-2-4'...
[ 175.601363] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 175.601387] FG: resotre_bat_health: Read bat health file failed!
[ 176.640702] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 176.640726] FG: resotre_bat_health: Read bat health file failed!
[ 177.681366] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 177.681392] FG: resotre_bat_health: Read bat health file failed!
[ 178.720509] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 178.720532] FG: resotre_bat_health: Read bat health file failed!
[ 179.578325] init: Received control message 'interface_start' for '[email protected]::ISensors/default' from pid: 463 (/system/bin/hwservicemanager)
[ 179.578381] init: Could not find '[email protected]::ISensors/default' for ctl.interface_start
[ 179.761358] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 179.761382] FG: resotre_bat_health: Read bat health file failed!
[ 180.126950] init: Received control message 'interface_start' for '[email protected]::ICameraProvider/legacy/0' from pid: 463 (/system/bin/hwservicemanager)
[ 180.343207] init: Received control message 'interface_start' for '[email protected]::IVibrator/default' from pid: 463 (/system/bin/hwservicemanager)
[ 180.343268] init: Could not find '[email protected]::IVibrator/default' for ctl.interface_start
[ 180.499044] init: Service 'vendor.camera-provider-2-4' (pid 2087) exited with status 1
[ 180.499070] init: Sending signal 9 to service 'vendor.camera-provider-2-4' (pid 2087) process group...
[ 180.499264] libprocessgroup: Successfully killed process cgroup uid 1047 pid 2087 in 0ms
[ 180.499390] init: updatable process 'vendor.camera-provider-2-4' exited 4 times before boot completed
[ 180.499706] init: Unable to set property 'ro.init.updatable_crashing_process_name' to 'vendor.camera-provider-2-4' from uid:0 gid:0 pid:1: Read-only property was already set
[ 180.800570] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 180.800593] FG: resotre_bat_health: Read bat health file failed!
[ 181.840576] FG: file_op: open /sdcard/bat_health err! error code:-2
[ 181.840599] FG: resotre_bat_health: Read bat health file failed!
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment