Skip to content

Instantly share code, notes, and snippets.

@mvaisakh

mvaisakh/Ramoops on bootloop

Created December 8, 2019 10:46
Show Gist options
  • Save mvaisakh/a7b4b5234f0290985959880422f5b623 to your computer and use it in GitHub Desktop.
Save mvaisakh/a7b4b5234f0290985959880422f5b623 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
Ramoops on bootloop
[ 0.000000] Booting Linux on physical CPU 0x100
[ 0.000000] Linux version 4.9.112-perf+ ([email protected]) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #7 SMP PREEMPT Sun Dec 8 11:07:10 CET 2019
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine: cedric
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000dfc00000, size 4 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region@0, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000dec00000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000ddc00000, size 16 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_region@0, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: invalid size property in 'mem_dump_region' node.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000008f800000, size 8 MiB
[ 0.000000] OF: reserved mem: initialized node venus_region@0, compatible id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000d6c00000, size 112 MiB
[ 0.000000] OF: reserved mem: initialized node secure_region@0, compatible id shared-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000084300000, size 37 MiB
[ 0.000000] OF: reserved mem: initialized node other_ext_region@0, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086800000, size 80 MiB
[ 0.000000] OF: reserved mem: initialized node modem_region@0, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b800000, size 17 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_fw_region@0, compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008c900000, size 7 MiB
[ 0.000000] OF: reserved mem: initialized node wcnss_fw_region@0, compatible id removed-dma-pool
[ 0.000000] cma: Reserved 16 MiB at 0x00000000d5c00000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] Did not receive the expected number of bytes from PRNG: 0
[ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0d59a5000 s55192 r8192 d30824 u94208
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 737761
[ 0.000000] Kernel command line: sched_enable_hmp=1 kpti=0 console=null androidboot.hardware=qcom user_debug=30 msm_rtb.filter=0x237 androidboot.usbconfigfs=true loop.max_part=7 androidboot.selinux=permissive ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 vmalloc=350M buildvariant=eng androidboot.emmc=true androidboot.serialno=ZY3226NTKV androidboot.baseband=msm androidboot.mode=normal androidboot.device=cedric androidboot.hwrev=0x8500 androidboot.radio=EMEA androidboot.powerup_reason=0x00004000 androidboot.bootreason=reboot msm_poweroff.download_mode=0 androidboot.fsg-id= androidboot.wifimacaddr=A8:96:75:EB:9B:CC,A8:96:75:EB:9B:CD androidboot.btmacaddr=A8:96:75:EB:9B:CB mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0 androidboot.bootloader=0xB831 androidboot.carrier=reteu androidboot.poweroff_alarm=0 androidboot.build_vars=NA androidboot.hardware.sku=XT1676 androidboot.secure_hardware=1 androidboot.bl_state=2 androidboot.cid=0x32 and
[ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
[ 0.000000] log_buf_len min size: 131072 bytes
[ 0.000000] log_buf_len: 1048576 bytes
[ 0.000000] early log buf free: 126636(96%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 2690380K/3000196K available (17916K kernel code, 2704K rwdata, 7808K rodata, 4096K init, 3017K bss, 133688K reserved, 176128K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8009200000 ( 17920 KB)
[ 0.000000] .rodata : 0xffffff8009200000 - 0xffffff8009a00000 ( 8192 KB)
[ 0.000000] .init : 0xffffff8009a00000 - 0xffffff8009e00000 ( 4096 KB)
[ 0.000000] .data : 0xffffff8009e00000 - 0xffffff800a0a4200 ( 2705 KB)
[ 0.000000] .bss : 0xffffff800a0a4200 - 0xffffff800a396784 ( 3018 KB)
[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00800000 - 0xffffffbf03800000 ( 48 MB actual)
[ 0.000000] memory : 0xffffffc020000000 - 0xffffffc0e0000000 ( 3072 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] arm_arch_timer: Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000005] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000017] clocksource: Switched to clocksource arch_sys_counter
[ 0.001014] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.001026] pid_max: default: 32768 minimum: 301
[ 0.001096] Security Framework initialized
[ 0.001104] SELinux: Initializing.
[ 0.001186] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001196] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002381] /cpus/cpu@100: Missing clock-frequency property
[ 0.002394] /cpus/cpu@101: Missing clock-frequency property
[ 0.002405] /cpus/cpu@102: Missing clock-frequency property
[ 0.002417] /cpus/cpu@103: Missing clock-frequency property
[ 0.002429] /cpus/cpu@0: Missing clock-frequency property
[ 0.002442] /cpus/cpu@1: Missing clock-frequency property
[ 0.002455] /cpus/cpu@2: Missing clock-frequency property
[ 0.002470] /cpus/cpu@3: Missing clock-frequency property
[ 0.002572] sched-energy: Sched-energy-costs installed from DT
[ 0.002587] ASID allocator initialised with 32768 entries
[ 0.019168] cpu_clock_a53_init_little: A53 Power clocks configured
[ 0.019703] MSM Memory Dump base table set up
[ 0.019716] MSM Memory Dump apps data table set up
[ 0.019859] EFI services will not be available.
[ 0.030423] CPU1: Booted secondary processor [410fd034]
[ 0.038614] CPU2: Booted secondary processor [410fd034]
[ 0.046778] CPU3: Booted secondary processor [410fd034]
[ 0.055092] CPU4: Booted secondary processor [410fd034]
[ 0.063524] CPU5: Booted secondary processor [410fd034]
[ 0.071900] CPU6: Booted secondary processor [410fd034]
[ 0.080317] CPU7: Booted secondary processor [410fd034]
[ 0.080657] Brought up 8 CPUs
[ 0.080684] SMP: Total of 8 processors activated.
[ 0.080692] CPU features: detected feature: 32-bit EL0 Support
[ 0.080700] CPU features: kernel page table isolation forced OFF by command line option
[ 0.080710] CPU: All CPU(s) started at EL1
[ 0.080793] alternatives: patching kernel code
[ 0.081003] CPU7: update max cpu_capacity 1024
[ 0.090063] CPU7: update max cpu_capacity 1024
[ 0.133704] DMI not present or invalid.
[ 0.134197] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.134214] futex hash table entries: 2048 (order: 6, 262144 bytes)
[ 0.141866] pinctrl core: initialized pinctrl subsystem
[ 0.142689] NET: Registered protocol family 16
[ 0.145289] schedtune: init normalization constants...
[ 0.145301] schedtune: CLUSTER[0-3] min_pwr: 1 max_pwr: 239
[ 0.145309] schedtune: CPU[0] min_pwr: 40 max_pwr: 1740
[ 0.145316] schedtune: CPU[1] min_pwr: 40 max_pwr: 1740
[ 0.145323] schedtune: CPU[2] min_pwr: 40 max_pwr: 1740
[ 0.145330] schedtune: CPU[3] min_pwr: 40 max_pwr: 1740
[ 0.145338] schedtune: CLUSTER[4-7] min_pwr: 1 max_pwr: 55
[ 0.145345] schedtune: CPU[4] min_pwr: 8 max_pwr: 213
[ 0.145352] schedtune: CPU[5] min_pwr: 8 max_pwr: 213
[ 0.145359] schedtune: CPU[6] min_pwr: 8 max_pwr: 213
[ 0.145366] schedtune: CPU[7] min_pwr: 8 max_pwr: 213
[ 0.145372] schedtune: SYSTEM min_pwr: 194 max_pwr: 8106
[ 0.145379] schedtune: using normalization constants mul: 151995810 sh1: 1 sh2: 12
[ 0.145384] schedtune: verify normalization constants...
[ 0.145390] schedtune: max_pwr/2^0: 7912 => norm_pwr: 1024
[ 0.145396] schedtune: max_pwr/2^1: 3956 => norm_pwr: 512
[ 0.145402] schedtune: max_pwr/2^2: 1978 => norm_pwr: 256
[ 0.145407] schedtune: max_pwr/2^3: 989 => norm_pwr: 128
[ 0.145413] schedtune: max_pwr/2^4: 494 => norm_pwr: 63
[ 0.145419] schedtune: max_pwr/2^5: 247 => norm_pwr: 31
[ 0.145424] schedtune: configured to support 5 boost groups
[ 0.147249] cpuidle: using governor menu
[ 0.148440] cpuidle: using governor qcom
[ 0.153028] vdso: 2 pages (1 code @ ffffff8009207000, 1 data @ ffffff8009e04000)
[ 0.153045] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.154081] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.155900] persistent_ram: persistent_ram: paddr: 00000000ae000000, vaddr: ffffff800a3a0000, buf size = 0x1fff4
[ 0.155921] persistent_ram: persistent_ram: paddr: 00000000ae020000, vaddr: ffffff800a400000, buf size = 0x3fff4
[ 0.157511] persistent_ram: persistent_ram: paddr: 00000000ae060000, vaddr: ffffff800a480000, buf size = 0x3fff4
[ 0.157537] persistent_ram: persistent_ram: paddr: 00000000ae0a0000, vaddr: ffffff8008056000, buf size = 0x7f4
[ 0.157545] persistent_ram: found existing invalid buffer, size 0, start 446
[ 0.158075] console [pstore-1] enabled
[ 0.158166] pstore: Registered ramoops as persistent store backend
[ 0.158175] ramoops: attached 0xbf800@0xae000000, ecc: 0/0
[ 0.158525] msm8937-pinctrl 1000000.pinctrl: invalid resource
[ 0.168992] unable to find DT imem DLOAD mode node
[ 0.169843] unable to find DT imem EDLOAD mode node
[ 0.171745] sps:sps is ready.
[ 0.173742] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
[ 0.173756] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
[ 0.176094] smd_channel_probe_now: allocation table not initialized
[ 0.176934] smd_channel_probe_now: allocation table not initialized
[ 0.177408] smd_channel_probe_now: allocation table not initialized
[ 0.178247] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches
[ 0.179354] pm8937_s2_level: Bringing 1uV into 16-16uV
[ 0.179719] pm8937_s2_floor_level: Bringing 1uV into 16-16uV
[ 0.180382] pm8937_s2_level_ao: Bringing 1uV into 16-16uV
[ 0.182520] pm8937_l3_level_ao: Bringing 1uV into 16-16uV
[ 0.192992] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
[ 0.194287] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
[ 0.194673] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
[ 0.195535] spm_regulator_probe: name=pm8937_s5, range=LV, voltage=1225000 uV, mode=AUTO, step rate=1200 uV/us
[ 0.197012] platform soc:qcom,adsprpc-mem: assigned reserved memory node adsp_region@0
[ 0.199055] platform 4080000.qcom,mss: assigned reserved memory node modem_region@0
[ 0.199281] platform c200000.qcom,lpass: assigned reserved memory node adsp_fw_region@0
[ 0.199501] platform a21b000.qcom,pronto: assigned reserved memory node wcnss_fw_region@0
[ 0.199649] platform 1de0000.qcom,venus: assigned reserved memory node venus_region@0
[ 0.201434] cpr_efuse_init: apc_corner: efuse_addr = 0x00000000000a4000 (len=0x1000)
[ 0.201466] cpr_read_fuse_revision: apc_corner: fuse revision = 2
[ 0.201480] cpr_parse_speed_bin_fuse: apc_corner: [row: 37]: 0x7808d02102073f71, speed_bits = 0
[ 0.201559] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[1]: 1145000 -> 1155000 uV
[ 0.201571] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[2]: 1165000 -> 1180000 uV
[ 0.201584] cpr_adjust_init_voltages: apc_corner: adjusted initial voltage[3]: 1240000 -> 1260000 uV
[ 0.201596] cpr_pvs_init: apc_corner: pvs voltage: [1155000 1180000 1260000] uV
[ 0.201606] cpr_pvs_init: apc_corner: ceiling voltage: [1155000 1225000 1350000] uV
[ 0.201616] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1090000] uV
[ 0.201724] cpr_init_cpr_parameters: apc_corner: up threshold = 2, down threshold = 4
[ 0.201750] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default.
[ 0.201776] cpr_init_cpr_efuse: apc_corner: [row:67] = 0x248f6213fb99202b
[ 0.201795] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 984
[ 0.201805] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 1019
[ 0.201814] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1152
[ 0.201842] cpr_adjust_target_quots: apc_corner: Corner[2]: adjusted target quot = 979
[ 0.201854] cpr_adjust_target_quots: apc_corner: Corner[3]: adjusted target quot = 1172
[ 0.201866] cpr_init_cpr_efuse: apc_corner: invalid quotient values; permanently disabling CPR
[ 0.201932] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000
[ 0.201942] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.628
[ 0.201960] cpr_virtual_corner_quot_adjust: apc_corner: corner=1 adjusted quotient=1084
[ 0.201972] cpr_virtual_corner_quot_adjust: apc_corner: corner=2 adjusted quotient=1079
[ 0.201984] cpr_virtual_corner_quot_adjust: apc_corner: corner=3 adjusted quotient=1152
[ 0.201996] cpr_virtual_corner_quot_adjust: apc_corner: corner=4 adjusted quotient=1176
[ 0.202007] cpr_virtual_corner_quot_adjust: apc_corner: corner=5 adjusted quotient=1237
[ 0.202019] cpr_virtual_corner_quot_adjust: apc_corner: corner=6 adjusted quotient=1322
[ 0.202033] cpr_virtual_corner_quot_adjust: apc_corner: corner=7 adjusted quotient=1272
[ 0.202041] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 1084
[ 0.202049] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 1079
[ 0.202056] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 1152
[ 0.202064] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 1176
[ 0.202072] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 1237
[ 0.202079] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1322
[ 0.202087] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1272
[ 0.202113] cpr_virtual_corner_voltage_adjust: apc_corner: corner=1 adjusted open-loop voltage=1205000
[ 0.202126] cpr_virtual_corner_voltage_adjust: apc_corner: corner=2 adjusted open-loop voltage=1230000
[ 0.202138] cpr_virtual_corner_voltage_adjust: apc_corner: corner=3 adjusted open-loop voltage=1265000
[ 0.202150] cpr_virtual_corner_voltage_adjust: apc_corner: corner=4 adjusted open-loop voltage=1275000
[ 0.202169] cpr_virtual_corner_voltage_adjust: apc_corner: corner=5 adjusted open-loop voltage=1300000
[ 0.202182] cpr_virtual_corner_voltage_adjust: apc_corner: corner=6 adjusted open-loop voltage=1335000
[ 0.202193] cpr_virtual_corner_voltage_adjust: apc_corner: corner=7 adjusted open-loop voltage=1310000
[ 0.202677] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us)
[ 0.202944] apc_corner: Bringing 0uV into 1-1uV
[ 0.219185] ramoops soc:ramoops: failed to locate DT /reserved-memory resource
[ 0.219204] ramoops: probe of soc:ramoops failed with error -22
[ 0.239130] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.239147] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[ 0.239172] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.239187] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.239243] mdss_pll_util_resource_init+0x2c/0xac->msm_mdss_config_vreg: gdsc get failed. rc=-517
[ 0.239252] mdss_pll_util_resource_init: Vreg config failed rc=-517
[ 0.239260] mdss_pll_probe: Pll ndx=0 resource init failed rc=-517
[ 0.239301] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[ 0.239311] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[ 0.239332] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.239347] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.239381] mdss_pll_util_resource_init+0x2c/0xac->msm_mdss_config_vreg: gdsc get failed. rc=-517
[ 0.239389] mdss_pll_util_resource_init: Vreg config failed rc=-517
[ 0.239396] mdss_pll_probe: Pll ndx=1 resource init failed rc=-517
[ 0.241752] KPI: Bootloader start count = 76893
[ 0.241762] KPI: Bootloader end count = 12360490
[ 0.241770] KPI: Bootloader display count = 597776595
[ 0.241776] KPI: Bootloader load kernel count = 535372745
[ 0.241784] KPI: Kernel MPM timestamp = 12377655
[ 0.241790] KPI: Kernel MPM Clock frequency = 32768
[ 0.241808] socinfo_print: v0.10, id=294, ver=1.0, raw_id=79, raw_ver=0, hw_plat=8, hw_plat_ver=65536
[ 0.241808] accessory_chip=0, hw_plat_subtype=0, pmic_model=65561, pmic_die_revision=65536 foundry_id=1 serial_number=34029425
[ 0.243153] arm-smmu 1c40000.arm,smmu-kgsl: Couldn't get clock: gpu_ahb_clk
[ 0.243518] arm-smmu 1e00000.qcom,iommu: Couldn't get clock: iface_clk
[ 0.246252] SCSI subsystem initialized
[ 0.246471] usbcore: registered new interface driver usbfs
[ 0.246525] usbcore: registered new interface driver hub
[ 0.246793] usbcore: registered new device driver usb
[ 0.247538] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8937@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 0.247565] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pm8937@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[ 0.247801] input: qpnp_pon as /devices/virtual/input/input0
[ 0.248382] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: No PON config. specified
[ 0.248443] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
[ 0.248466] qcom,qpnp-power-on 200f000.qcom,spmi:qcom,pmi8950@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
[ 0.248890] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[ 0.248955] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
[ 0.248969] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
[ 0.249090] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[ 0.249128] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
[ 0.249141] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
[ 0.249397] media: Linux media interface: v0.10
[ 0.249434] Linux video capture interface: v2.00
[ 0.249538] BATTERY: batterydata_init: Battery-data device created!
[ 0.258290] EDAC MC: Ver: 3.0.0
[ 0.259280] Unable to get pmic_revid rc=-22
[ 0.259409] dmi: Firmware registration failed.
[ 0.260120] platform soc:qcom,ion:qcom,ion-heap@8: assigned reserved memory node secure_region@0
[ 0.260278] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region@0
[ 0.260421] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory node qseecom_ta_region
[ 0.260667] ION heap system created
[ 0.260882] ION heap mm created at 0x00000000d6c00000 with size 7000000
[ 0.260899] ION heap qsecom created at 0x00000000ddc00000 with size 1000000
[ 0.260915] ION heap qsecom_ta created at 0x00000000dec00000 with size 1000000
[ 0.262355] PMIC@SID0: PM8937 v1.0 options: 0, 2, 0, 0
[ 0.262485] PMIC@SID2: PMI8950 v2.0 options: 0, 0, 0, 0
[ 0.263945] moto sensor init!
[ 0.263965] sensor init success!
[ 0.264009] Advanced Linux Sound Architecture Driver Initialized.
[ 0.264551] Bluetooth: Core ver 2.22
[ 0.264581] NET: Registered protocol family 31
[ 0.264589] Bluetooth: HCI device and connection manager initialized
[ 0.264607] Bluetooth: HCI socket layer initialized
[ 0.264618] Bluetooth: L2CAP socket layer initialized
[ 0.265158] NetLabel: Initializing
[ 0.265167] NetLabel: domain hash size = 128
[ 0.265173] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.265226] NetLabel: unlabeled traffic allowed by default
[ 0.265844] qcom,gcc-8952 1800000.qcom,gcc: GPU speed bin: 0
[ 0.266064] gfx3d_clk_src: set OPP pair(19200000 Hz: 128 uV) on 1c00000.qcom,kgsl-3d0
[ 0.266362] gfx3d_clk_src: set OPP pair(200000000 Hz: 128 uV) on 1c00000.qcom,kgsl-3d0
[ 0.266879] gfx3d_clk_src: set OPP pair(450000000 Hz: 384 uV) on 1c00000.qcom,kgsl-3d0
[ 0.281170] qcom,gcc-spm-8952 b111200.qcom,spm: Registered GCC SPM clocks
[ 0.281202] qcom,gcc-8952 1800000.qcom,gcc: Registered GCC clocks
[ 0.281268] cpu-clock-8939 b011050.qcom,cpu-clock-8939: No PVS version available. Defaulting to 0!
[ 0.281280] cpu-clock-8939 b011050.qcom,cpu-clock-8939: Speed bin: 0 PVS Version: 0
[ 0.284585] populate_opp_table: clock-cpu-8939: OPP tables populated (cpu 7 and 3)[ 0.284596] print_opp_table: clock_cpu: a53_c0: OPP voltage for 768000000: 1155000
[ 0.284606] print_opp_table: clock_cpu: a53_c0: OPP voltage for 1094400000: 1335000
[ 0.284615] print_opp_table: clock_cpu: a53_c1: OPP voltage for 960000000: 1155000
[ 0.284622] print_opp_table: clock_cpu: a53_c1: OPP voltage for 1401000000: 1335000
[ 0.285466] qpnp_labibb_regulator_probe: LAB/IBB registered successfully, lab_vreg enable=1 ibb_vreg enable=1 swire_control=0
[ 0.285553] sched-energy energy-costs: cpu=0 eff=1126 [freq=700000 cap=512 power_d0=623] -> [freq=1400000 cap=1024 power_d0=1740]
[ 0.285563] CPU0: update cpu_capacity 1024
[ 0.285577] sched-energy energy-costs: cpu=1 eff=1126 [freq=700000 cap=512 power_d0=623] -> [freq=1400000 cap=1024 power_d0=1740]
[ 0.285585] CPU1: update cpu_capacity 1024
[ 0.285599] sched-energy energy-costs: cpu=2 eff=1126 [freq=700000 cap=512 power_d0=623] -> [freq=1400000 cap=1024 power_d0=1740]
[ 0.285607] CPU2: update cpu_capacity 1024
[ 0.285620] sched-energy energy-costs: cpu=3 eff=1126 [freq=700000 cap=512 power_d0=623] -> [freq=1400000 cap=1024 power_d0=1740]
[ 0.285628] CPU3: update cpu_capacity 1024
[ 0.285641] sched-energy energy-costs: cpu=4 eff=1024 [freq=500000 cap=333 power_d0=70] -> [freq=1100000 cap=728 power_d0=213]
[ 0.285649] CPU4: update cpu_capacity 728
[ 0.285663] sched-energy energy-costs: cpu=5 eff=1024 [freq=500000 cap=333 power_d0=70] -> [freq=1100000 cap=728 power_d0=213]
[ 0.285671] CPU5: update cpu_capacity 728
[ 0.285685] sched-energy energy-costs: cpu=6 eff=1024 [freq=500000 cap=333 power_d0=70] -> [freq=1100000 cap=728 power_d0=213]
[ 0.285703] CPU6: update cpu_capacity 728
[ 0.285716] sched-energy energy-costs: cpu=7 eff=1024 [freq=500000 cap=333 power_d0=70] -> [freq=1100000 cap=728 power_d0=213]
[ 0.285724] CPU7: update cpu_capacity 728
[ 0.286338] CPU7: update max cpu_capacity 728
[ 0.286350] CPU3: update max cpu_capacity 1024
[ 0.287599] sched-energy energy-costs: Sched-energy-costs capacity updated
[ 0.290144] CPU4: update max cpu_capacity 728
[ 0.290160] CPU0: update max cpu_capacity 1024
[ 0.290476] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.290497] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[ 0.290522] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.290537] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.290846] dsi_pll_clock_register_lpm: Registered DSI PLL:0 clocks successfully
[ 0.290923] mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
[ 0.290934] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
[ 0.290955] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.290971] mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
[ 0.291992] dsi_pll_clock_register_lpm: Registered DSI PLL:1 clocks successfully
[ 0.292480] arm-smmu 1c40000.arm,smmu-kgsl: (IDR0.CTTW overridden by dma-coherent property)
[ 0.292497] arm-smmu 1c40000.arm,smmu-kgsl: stream matching with 4 register groups, mask 0x3
[ 0.293897] arm-smmu 1e00000.qcom,iommu: (IDR0.CTTW overridden by dma-coherent property)
[ 0.293911] arm-smmu 1e00000.qcom,iommu: stream matching with 122 register groups, mask 0x7fff
[ 0.294008] arm-smmu 1e00000.qcom,iommu: found 32 context interrupt(s) but have 30 context banks. assuming 30 context interrupts.
[ 0.294583] iommu: Adding device soc:qcom,msm-audio-ion to group 0
[ 0.294793] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
[ 0.294852] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.294864] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.295112] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.295516] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
[ 0.295564] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.295575] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
[ 0.295783] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.[ 0.298226] cpufreq: driver msm up and running
[ 0.301125] clocksource: Switched to clocksource arch_sys_counter
[ 0.337460] VFS: Disk quotas dquot_6.6.0
[ 0.337512] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.337575] msm_bus_fabric_init_driver
[ 0.342765] msm_bus_device 580000.ad-hoc-bus: Bus scaling driver probe successful
[ 0.343956] NET: Registered protocol family 2
[ 0.344359] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.344589] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.345090] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.345139] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.345205] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.345368] NET: Registered protocol family 1
[ 0.346033] gcc-mdss-8952 soc:qcom,gcc-mdss@1800000: Registered GCC MDSS clocks.
[ 0.346987] Trying to unpack rootfs image as initramfs...
[ 0.409212] Freeing initrd memory: 1876K
[ 0.410548] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 0.414879] audit: initializing netlink subsys (disabled)
[ 0.414925] audit: type=2000 audit(0.409:1): initialized
[ 0.415567] workingset: timestamp_bits=62 max_order=20 bucket_order=0
[ 0.420647] [SDFAT] Filesystem version 2.1.8
[ 0.420801] Registering sdcardfs 0.1
[ 0.420981] fuse init (API version 7.26)
[ 0.421684] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
[ 0.421690] pfk_f2fs [pfk_f2fs_init]: PFK F2FS inited successfully
[ 0.421696] pfk [pfk_init]: Driver initialized successfully
[ 0.425948] io scheduler noop registered
[ 0.426097] io scheduler cfq registered (default)
[ 0.434124] msm_mdss_get_res_byname: 'vbif_nrt_phys' resource not found
[ 0.434143] mdss_mdp_probe+0x1a4/0x1300->msm_mdss_ioremap_byname: 'vbif_nrt_phys' msm_mdss_get_res_byname failed
[ 0.434316] mdss_mdp_irq_clk_register: unable to get clk: lut_clk
[ 0.434332] mdss_mdp_irq_clk_register: unable to get clk: mnoc_clk
[ 0.434689] No change in context(0==0), skip
[ 0.435163] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
[ 0.435181] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:1
[ 0.435187] mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:2
[ 0.435201] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:3
[ 0.435216] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
[ 0.435226] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
[ 0.435316] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
[ 0.435325] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
[ 0.435565] xlog_status: enable:1, panic:1, dump:2
[ 0.435815] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 1
[ 0.436017] iommu: Adding device 1a00000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 2
[ 0.436200] mdss_mdp_probe: mdss version = 0x100e0000, bootloader display is on, num 1, intf_sel=0x00000100
[ 0.437499] mdss_smmu_util_parse_dt_clock: clocks are not defined
[ 0.437510] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
[ 0.437528] mdss_smmu_util_parse_dt_clock: clocks are not defined
[ 0.437536] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
[ 0.437821] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.437832] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.437844] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.438239] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 0.438328] mdss_panel_parse_panel_config_dt: BL: panel = mipi_mot_video_tianma_1080p_497, manufacture_id(0xDA) = 0x1a controller_ver(0xDB) = 0xd0 controller_drv_ver(0XDC) = 0xc4, full = 0x0000000000c4d01a
[ 0.438338] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0 panel_name:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0
[ 0.438351] mdss_dsi_panel_init: Panel Name = mipi_mot_vid_tianma_1080p_497
[ 0.438486] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_mot_tianma_497_1080p_video_v0" (ffffffc0d01e4400)
[ 0.438503] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
[ 0.438511] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
[ 0.438516] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
[ 0.438615] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
[ 0.438623] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
[ 0.438644] mdss_dsi_parse_panel_features: ulps feature disabled
[ 0.438651] mdss_dsi_parse_panel_features: ulps during suspend feature disabled[ 0.438658] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
[ 0.438723] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
[ 0.438731] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
[ 0.438763] mdss_panel_parse_param_prop: HBM feature enabled with 2 dt cmds
[ 0.438767] mdss_panel_parse_param_prop: HBM type = 1
[ 0.438796] mdss_panel_parse_param_prop: CABC feature enabled with 3 dt cmds
[ 0.438823] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.438833] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.438844] mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
[ 0.438970] mdss_dsi_parse_gpio_params:4264, TE gpio not specified
[ 0.438977] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
[ 0.438983] mdss_dsi_parse_gpio_params: ext vdd gpio not specified
[ 0.439021] mdss_dsi_retrieve_ctrl_resources: phy_regulator_base=ffffff800a707b80 phy_regulator_size=30
[ 0.439027] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff800a6bd000 ctrl_size=300 phy_base=ffffff800a705400 phy_size=280
[ 0.439170] dsi_panel_device_register: Continuous splash enabled
[ 0.439234] mdss_register_panel: adding framebuffer device 1a94000.qcom,mdss_dsi_ctrl0
[ 0.460120] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040002, PHY rev:0x1
[ 0.460280] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
[ 0.460288] mdss_dsi_pinctrl_init: failed to get pinctrl
[ 0.460292] mdss_dsi_ctrl_probe: failed to get pin resources
[ 0.460322] mdss_dsi_find_panel_of_node: controller 1: is not present in 0:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0
[ 0.460328] mdss_dsi_pref_prim_panel:can't find panel phandle
[ 0.460333] mdss_dsi_config_panel: can't find panel node 0:qcom,mdss_dsi_mot_tianma_497_1080p_video_v0
[ 0.460337] mdss_dsi_ctrl_probe: panel configuration failed
[ 0.460347] mdss_dsi_ctrl: probe of 1a96000.qcom,mdss_dsi_ctrl1 failed with error -22
[ 0.460574] mdss_dsi_status_init: DSI status check interval:8000
[ 0.460753] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
[ 0.461242] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
[ 0.461650] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
[ 0.461882] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
[ 0.461956] mdss_fb_register: FrameBuffer[1] 640x640 registered successfully!
[ 0.462034] mdss_mdp_splash_parse_dt: splash mem child node is not present
[ 0.462128] qcom-sps-dma 7884000.qcom,sps-dma: dma_async_device_register: device has no channels!
[ 0.462185] qcom-sps-dma 7ac4000.qcom,sps-dma: dma_async_device_register: device has no channels!
[ 0.463229] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 0.463252] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
[ 0.465281] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.465288] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.465294] memshare: hyp_assign_phys failed size=2097152 err=-5
[ 0.465326] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
[ 0.465511] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
[ 0.467957] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.467964] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.467970] memshare: hyp_assign_phys failed size=5242880 err=-5
[ 0.467980] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
[ 0.469367] minidump-id not found for adsp
[ 0.469493] minidump-id not found for wcnss
[ 0.469686] minidump-id not found for venus
[ 0.469706] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped.
[ 0.470669] minidump-id not found for modem
[ 0.471001] msm-dcc b3000.dcc: DCC XPU is not specified
[ 0.472222] wcnss: wcnss_wlan probed in built-in mode
[ 0.472613] BOOT_SEQ: 0x00000000
[ 0.473006] msm_serial_hs module loaded
[ 0.474735] random: fast init done
[ 0.474836] random: crng init done
[ 0.482168] diag: In __diag_glink_init, unable to register for glink channel DIAG_CTRL
[ 0.482392] diag: In __diag_glink_init, unable to register for glink channel DIAG_DATA
[ 0.482539] diag: In __diag_glink_init, unable to register for glink channel DIAG_CMD
[ 0.482683] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_DATA
[ 0.482826] diag: In __diag_glink_init, unable to register for glink channel DIAG_DCI_CMD
[ 0.485633] iommu: Adding device 1c40000.qcom,kgsl-iommu:gfx3d_user to group 3
[ 0.495749] brd: module loaded
[ 0.499716] loop: module loaded
[ 0.500168] zram: Added device: zram0
[ 0.501013] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1001000
[ 0.501040] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE[ 0.501049] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
[ 0.501056] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
[ 0.501260] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
[ 0.501720] fpc1020_init OK
[ 0.503597] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[ 0.503940] qce 720000.qcedev: QTI Crypto 5.3.3 device found @0x720000
[ 0.503951] qce 720000.qcedev: CE device = 0x0 IO base, CE = ffffff800afa0000 Consumer (IN) PIPE 2,
[ 0.503951] Producer (OUT) PIPE 3 IO base BAM = 0000000000000000
[ 0.503951] BAM IRQ 104 Engines Availability = 0x2010853
[ 0.504123] sps:BAM 0x0000000000704000 is registered.[ 0.504320] sps:BAM 0x0000000000704000 (va:0xffffff800b920000) enabled: ver:0x27, number of pipes:8
[ 0.504517] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 104
[ 0.509762] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1
[ 0.510160] qcrypto 720000.qcrypto: QTI Crypto 5.3.3 device found @0x720000
[ 0.510170] qcrypto 720000.qcrypto: CE device = 0x0 IO base, CE = ffffff800b960000 Consumer (IN) PIPE 4,
[ 0.510170] Producer (OUT) PIPE 5 IO base BAM = 0000000000000000
[ 0.510170] BAM IRQ 104 Engines Availability = 0x2010853
[ 0.510432] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000000704000 irq 104
[ 0.513602] qcrypto 720000.qcrypto: qcrypto-ecb-aes
[ 0.513749] qcrypto 720000.qcrypto: qcrypto-cbc-aes
[ 0.513876] qcrypto 720000.qcrypto: qcrypto-ctr-aes
[ 0.514003] qcrypto 720000.qcrypto: qcrypto-ecb-des
[ 0.514127] qcrypto 720000.qcrypto: qcrypto-cbc-des
[ 0.514254] qcrypto 720000.qcrypto: qcrypto-ecb-3des
[ 0.514379] qcrypto 720000.qcrypto: qcrypto-cbc-3des
[ 0.514503] qcrypto 720000.qcrypto: qcrypto-xts-aes
[ 0.514628] qcrypto 720000.qcrypto: qcrypto-sha1
[ 0.514753] qcrypto 720000.qcrypto: qcrypto-sha256
[ 0.514880] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[ 0.515007] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[ 0.515132] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[ 0.515259] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[ 0.515389] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[ 0.515517] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[ 0.515645] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
[ 0.515771] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
[ 0.515896] qcrypto 720000.qcrypto: qcrypto-aes-ccm
[ 0.516022] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
[ 0.516378] qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
[ 0.516437] ICE IRQ = 89
[ 0.516929] SCSI Media Changer driver v0.25
[ 0.517592] msm8937-pinctrl 1000000.pinctrl: function 'blsp_spi7_cs0' not supported
[ 0.517599] msm8937-pinctrl 1000000.pinctrl: invalid function blsp_spi7_cs0 in map table
[ 0.518451] spi_qsd 7af6000.spi: init_resources: unable to get core_clk
[ 0.518463] spi_qsd 7af6000.spi: init_resources: unable to get core_clk
[ 0.518470] spi_qsd 7af6000.spi: Failure during runtime get,rc=-2
[ 0.519161] sps: BAM device 0x0000000007884000 is not registered yet.
[ 0.519305] sps:BAM 0x0000000007884000 is registered.[ 0.519711] sps:BAM 0x0000000007884000 (va:0xffffff800b9e0000) enabled: ver:0x19, number of pipes:12
[ 0.520671] spi4.0 supply sensor3 not found, using dummy regulator
[ 0.521696] stml0xx spi4.0: Couldn't register switch (ý{¾©ý) rc=-22
[ 0.521703] stml0xx spi4.0: Couldn't register switch (ý{¾©ý) rc=-22
[ 0.521809] input: sensorprocessor as /devices/virtual/input/input1
[ 0.521818] stml0xx spi4.0: stml0xx_akm_init
[ 0.522525] libphy: Fixed MDIO Bus: probed
[ 0.522531] tun: Universal TUN/TAP device driver, 1.6
[ 0.522535] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 0.522579] PPP generic driver version 2.4.2
[ 0.522634] PPP BSD Compression module registered
[ 0.522639] PPP Deflate Compression module registered
[ 0.522655] PPP MPPE Compression module registered
[ 0.522661] NET: Registered protocol family 24
[ 0.522779] usbcore: registered new interface driver asix
[ 0.522832] usbcore: registered new interface driver ax88179_178a
[ 0.522860] usbcore: registered new interface driver cdc_ether
[ 0.522884] usbcore: registered new interface driver net1080
[ 0.522909] usbcore: registered new interface driver cdc_subset
[ 0.522933] usbcore: registered new interface driver zaurus
[ 0.522968] usbcore: registered new interface driver cdc_ncm
[ 0.522974] CHRDEV "uio" major number 233 goes below the dynamic allocation range
[ 0.523377] msm_sharedmem: sharedmem_register_qmi: qmi init successful
[ 0.524412] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 0.524419] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 0.524426] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x00000000d6700000 size=1572864 err=-5
[ 0.524498] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
[ 0.525220] msm_otg 78db000.usb: msm_otg probe
[ 0.527069] msm_otg 78db000.usb: OTG regs = ffffff800a7fa000
[ 0.528777] CHRDEV "usbmon" major number 232 goes below the dynamic allocation range
[ 0.528834] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.528839] ehci-platform: EHCI generic platform driver
[ 0.529267] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 0.529508] Unable to get vbus_otg
[ 0.529515] msm_hsusb_host msm_hsusb_host: unable to register with transceiver
[ 0.529609] usbcore: registered new interface driver cdc_acm
[ 0.529613] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.529648] usbcore: registered new interface driver usb-storage
[ 0.529670] usbcore: registered new interface driver ums-alauda
[ 0.529693] usbcore: registered new interface driver ums-cypress
[ 0.529716] usbcore: registered new interface driver ums-datafab
[ 0.529738] usbcore: registered new interface driver ums-freecom
[ 0.529763] usbcore: registered new interface driver ums-isd200
[ 0.529786] usbcore: registered new interface driver ums-jumpshot
[ 0.529808] usbcore: registered new interface driver ums-karma
[ 0.529830] usbcore: registered new interface driver ums-onetouch
[ 0.529854] usbcore: registered new interface driver ums-sddr09
[ 0.529876] usbcore: registered new interface driver ums-sddr55
[ 0.529899] usbcore: registered new interface driver ums-usbat
[ 0.529952] usbcore: registered new interface driver usbserial
[ 0.529982] usbcore: registered new interface driver usb_ehset_test
[ 0.530011] CHRDEV "ttyGS" major number 231 goes below the dynamic allocation range
[ 0.530924] CHRDEV "rmnet_ctrl" major number 230 goes below the dynamic allocation range
[ 0.531652] mousedev: PS/2 mouse device common for all mice
[ 0.531995] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-aod[0]
[ 0.532180] synaptics_dsx_i2c 3-0020: no valid patch sets found
[ 0.532189] synaptics_dsx_dt_parse_modifiers: processing modifier config_modifier-fps[5]
[ 0.532194] synaptics_dsx_dt_parse_modifiers: using fingerprint sensor detection
[ 0.532200] synaptics_dsx_dt_parse_modifier: using touch clip area in fps-active
[ 0.532246] synaptics_dsx_of_init: using gpio config
[ 0.532777] 3-0020 supply vdd_quirk not found, using dummy regulator
[ 0.578967] synaptics_dsx_i2c 3-0020: synaptics_rmi4_cap_button_map: cap_button_map is NULL in board file
[ 0.581073] synaptics_dsx_i2c 3-0020: F51 ctrl[0]=02
[ 0.581080] synaptics_dsx_i2c 3-0020: F51 ctrl[4]=14
[ 0.583209] synaptics_rmi4_query_device: touch interrupt status and finger data not contiguous
[ 0.584492] input: synaptics_dsx_i2c as /devices/platform/soc/78b7000.i2c/i2c-3/3-0020/input/input2
[ 0.584544] synaptics_rmi4_query_device: Product: s3203b, firmware id: 25d862, config id: 16120901
[ 0.585388] synaptics_dsx_sensor_state: state change UNKNOWN -> STANDBY
[ 0.585396] synaptics_dsx_sysfs_touchscreen: assigned minor 32
[ 0.585552] CHRDEV "rmi" major number 229 goes below the dynamic allocation range
[ 0.586215] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok)
[ 0.586481] input: SX9310 Cap Touch as /devices/virtual/input/input3
[ 0.586545] sensors_classdev_register,Moto CapSense
[ 0.586626] Registered sensors device: Moto CapSense,ret = 0
[ 0.586881] SX9310 registered with threaded irq (282)
[ 0.588139] synaptics_dsx_i2c 3-0020: fwu_read_f34_queries: BL version = 5
[ 0.588556] synaptics_rmi4_detection_work: using F34 status retrieval function
[ 1.001457] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8937@0:qcom,pm8937_rtc: rtc core: registered qpnp_rtc as rtc0
[ 1.001817] i2c /dev entries driver
[ 1.005163] iommu: Adding device 1d00000.qcom,vidc:non_secure_cb to group 4
[ 1.005789] iommu: Adding device 1d00000.qcom,vidc:secure_bitstream_cb to group 5
[ 1.006231] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 1.006240] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 1.006346] iommu: Adding device 1d00000.qcom,vidc:secure_pixel_cb to group 6
[ 1.006728] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 1.006736] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 1.006851] iommu: Adding device 1d00000.qcom,vidc:secure_non_pixel_cb to group 7
[ 1.007244] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 1.007253] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 1.011988] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 8
[ 1.012215] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [0] = 1024
,[ 1.012224] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 6, cb->name: :vfe sid [1] = 9216
[ 1.012224] ,
[ 1.012524] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 9
[ 1.012655] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :cpp sid [0] = 7168
,[ 1.012743] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 10
[ 1.012870] CAM-SMMU cam_smmu_populate_sids:2081 __debug cnt = 3, cb->name: :jpeg_enc0 sid [0] = 6144
,[ 1.014503] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 1.016386] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 1.016613] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 1.017227] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 1.017432] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 1.017633] msm_camera_get_dt_vreg_data:1125 number of entries is 0 or not present in dts
[ 1.018187] msm_actuator_platform_probe:1994 msm_actuator_platform_probe: No/Error Actuator GPIOs
[ 1.018848] msm_eeprom_platform_probe failed 1780
[ 1.019168] msm_eeprom_platform_probe failed 1780
[ 1.025603] MSM-CPP cpp_init_hardware:1133 CPP HW Version: 0x40030002
[ 1.025617] MSM-CPP cpp_init_hardware:1151 stream_cnt:0
[ 1.025757] MSM-CPP cpp_release_hardware:1214 cpp hw release done
[ 1.027371] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
[ 1.027379] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
[ 1.027508] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
[ 1.028159] CAM-SOC msm_camera_get_reg_base:870 err: mem resource vfe_fuse not found
[ 1.028165] CAM-SOC msm_camera_get_res_size:913 err: mem resource vfe_fuse not found
[ 1.028268] msm_vfe47_get_clks: cannot find camss_vfe_stream_clk
[ 1.029307] __msm_jpeg_init:1591] Jpeg Device id 0[ 1.029462] CHRDEV "jpeg0" major number 228 goes below the dynamic allocation range
[ 1.030385] FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=ee
[ 1.031974] FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=17
[ 1.037466] SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb HVDCP enabled
[ 1.048670] qpnp-smbcharger 200f000.qcom,spmi:qcom,pmi8950@2:qcom,qpnp-smbcharger: SMBCHG successfully probe Charger version=SCHG_LITE Revision DIG:0.0 ANA:0.1 batt=1 dc=0 usb=1
[ 1.051349] thermal thermal_zone0: failed to read out thermal zone (-517)
[ 1.051554] thermal thermal_zone1: failed to read out thermal zone (-517)
[ 1.051655] thermal thermal_zone2: failed to read out thermal zone (-517)
[ 1.051746] thermal thermal_zone3: failed to read out thermal zone (-517)
[ 1.052089] qpnp_vadc_read: Error reading die_temp
[ 1.072184] device-mapper: uevent: version 1.0.3
[ 1.072351] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
[ 1.072557] device-mapper: req-crypt: dm-req-crypt successfully initalized.
[ 1.072557]
[ 1.072951] CHRDEV "bt" major number 227 goes below the dynamic allocation range
[ 1.073041] sdhci: Secure Digital Host Controller Interface driver
[ 1.073045] sdhci: Copyright(c) Pierre Ossman
[ 1.073049] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.074884] qcom,leds-qpnp: probe of 200f000.qcom,spmi:qcom,pmi8950@2:qcom,leds@a100 failed with error -10
[ 1.075222] sdhci_msm 7824900.sdhci: failed opening nvmem cell err : -2
[ 1.075241] qcom_ice_get_pdevice: found ice device ffffffc0d0237800
[ 1.075248] qcom_ice_get_pdevice: matching platform device ffffffc0aeab6000
[ 1.077410] usbcore: registered new interface driver usbhid
[ 1.077417] usbhid: USB HID core driver
[ 1.077594] ashmem: initialized
[ 1.077803] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
[ 1.077915] qcom_ice 7803000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff800afd8000
[ 1.078723] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 64-bit ADMA in CMDQ mode
[ 1.151735] mmc0: Out-of-interrupt timeout is 50[ms]
[ 1.151746] mmc0: eMMC FW version: 0x0d
[ 1.151752] mmc0: CMDQ supported: depth: 16
[ 1.151757] mmc0: cache barrier support 0 flush policy 0
[ 1.160088] cmdq_host_alloc_tdl: desc_size: 768 data_sz: 63488 slot-sz: 24
[ 1.160301] mmc0: CMDQ enabled on card
[ 1.160319] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 1.161032] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0xf) latency=-1
[ 1.161043] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xf0) latency=-1
[ 1.161149] mmcblk0: mmc0:0001 RE1BMB 14.6 GiB
[ 1.161413] mmcblk0rpmb: mmc0:0001 RE1BMB partition 3 4.00 MiB
[ 1.163181] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54
[ 1.169171] sdhci_msm 7864900.sdhci: failed opening nvmem cell err : -2
[ 1.169188] sdhci_msm 7864900.sdhci: sdhci_msm_probe: ICE device is not enabled
[ 1.183034] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 64-bit ADMA in legacy mode
[ 1.213039] tz_log 8600720.tz-log: Hyp log service is not supported
[ 1.213742] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
[ 1.219584] coresight-tmc 6028000.tmc: failed to get csr, defer probe
[ 1.219730] coresight-tmc 6027000.tmc: failed to get csr, defer probe
[ 1.221618] coresight-replicator-qcom 6026000.replicator: REPLICATOR 1.0 initialized
[ 1.221812] coresight-stm 6002000.stm: stm_register_device failed, probing deffered
[ 1.222797] OF: graph: no port node found in /soc/csr@6001000
[ 1.222866] coresight-csr 6001000.csr: CSR initialized: coresight-csr
[ 1.223225] OF: graph: no port node found in /soc/hwevent@6101000
[ 1.223296] coresight-hwevent 6101000.hwevent: Hardware Event driver initialized
[ 1.223809] CHRDEV "sensors" major number 226 goes below the dynamic allocation range
[ 1.224130] usbcore: registered new interface driver snd-usb-audio
[ 1.224852] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.228507] wsa881x-i2c-codec 2-000f: No cache used with register defaults set!
[ 1.228819] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xf MSTR_STS:0x0d1343c8 OPER:0x00000010
[ 1.228845] Failed reading reg=5 - retry(0)
[ 1.240200] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xf MSTR_STS:0x091343c8 OPER:0x00000010
[ 1.240226] Failed reading reg=5 - retry(1)
[ 1.242154] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
[ 1.242364] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
[ 1.242377] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.242405] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
[ 1.242601] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
[ 1.242613] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.242640] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
[ 1.242841] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
[ 1.242853] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.242881] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
[ 1.243077] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
[ 1.243089] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.243117] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
[ 1.243314] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
[ 1.243327] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.243354] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
[ 1.243551] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
[ 1.243563] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.243590] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
[ 1.243789] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
[ 1.243801] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.243833] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
[ 1.244027] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
[ 1.244039] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.244065] msm-dai-tdm soc:qcom,msm-dai-tdm-quin-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quin-rx group_id: 0x9140
[ 1.244265] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0 dev_id: 0x9040
[ 1.244278] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-rx:qcom,msm-dai-q6-tdm-quin-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.244305] msm-dai-tdm soc:qcom,msm-dai-tdm-quin-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quin-tx group_id: 0x9141
[ 1.244500] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0 dev_id: 0x9041
[ 1.244512] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quin-tx:qcom,msm-dai-q6-tdm-quin-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
[ 1.250967] CHRDEV "avtimer" major number 225 goes below the dynamic allocation range
[ 1.251405] audio_notifier_init: PDR register failed, ret = -19, disable service
[ 1.251790] audio_notifer_reg_service: service SSR_ADSP is in use
[ 1.251797] audio_notifer_reg_service: service SSR_MODEM is in use
[ 1.253121] u32 classifier
[ 1.253126] Actions configured
[ 1.253135] Netfilter messages via NETLINK v0.30.
[ 1.253310] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 1.253482] ctnetlink v0.93: registering with nfnetlink.
[ 1.253781] xt_time: kernel timezone is -0000
[ 1.253852] IPv4 over IPsec tunneling driver
[ 1.254190] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.254340] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 1.254392] Initializing XFRM netlink socket
[ 1.254648] NET: Registered protocol family 10
[ 1.255453] mip6: Mobile IPv6
[ 1.255469] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.255892] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.256475] NET: Registered protocol family 17
[ 1.256490] NET: Registered protocol family 15
[ 1.256510] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.256516] Ebtables v2.0 registered
[ 1.256590] l2tp_core: L2TP core driver, V2.0
[ 1.256601] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.256605] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 1.256618] l2tp_netlink: L2TP netlink interface
[ 1.256643] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 1.256647] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 1.256746] sctp: Hash tables configured (bind 256/256)
[ 1.257513] NET: Registered protocol family 27
[ 1.258119] spmi spmi-0: error: impermissible write to peripheral sid:0 addr:0xc741
[ 1.258127] qcom-spmi-gpio 200f000.qcom,spmi:qcom,pm8937@0:gpios: write 0x41 failed
[ 1.258135] adv_vreg: Failed to request enable GPIO1279: -19
[ 1.258142] reg-fixed-voltage soc:adv_vreg: Failed to register regulator: -19
[ 1.262287] minidump-id not found for adsp
[ 1.262461] subsys-pil-tz c200000.qcom,lpass: for adsp segments only will be dumped.
[ 1.263005] minidump-id not found for wcnss
[ 1.263126] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped.
[ 1.263637] minidump-id not found for modem
[ 1.263951] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
[ 1.263999] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
[ 1.264307] CHRDEV "byte-cntr" major number 224 goes below the dynamic allocation range
[ 1.264510] sps:BAM 0x0000000006044000 is registered.[ 1.265215] CHRDEV "6002000.stm" major number 223 goes below the dynamic allocation range
[ 1.265354] coresight-stm 6002000.stm: STM32 initialized
[ 1.265583] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.265597] msm_otg 78db000.usb: phy_reset: success
[ 1.267506] Registered cp15_barrier emulation handler
[ 1.267522] Registered setend emulation handler
[ 1.267549] core_ctl: Creating CPU group 0
[ 1.267554] core_ctl: Init CPU0 state
[ 1.267558] core_ctl: Init CPU1 state
[ 1.267562] core_ctl: Init CPU2 state
[ 1.267565] core_ctl: Init CPU3 state
[ 1.267728] core_ctl: Creating CPU group 4
[ 1.267734] core_ctl: Init CPU4 state
[ 1.267738] core_ctl: Init CPU5 state
[ 1.267742] core_ctl: Init CPU6 state
[ 1.267745] core_ctl: Init CPU7 state
[ 1.268096] registered taskstats version 1
[ 1.269690] qcom,cc-debug-8952 1874000.qcom,cc-debug: Registered Debug Mux successfully
[ 1.270183] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xf MSTR_STS:0x0d1343c8 OPER:0x00000010
[ 1.270208] Failed reading reg=5 - retry(2)
[ 1.274472] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb to group 11
[ 1.275662] CHRDEV "adsprpc-smd" major number 222 goes below the dynamic allocation range
[ 1.276032] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.278017] input: soc:gpio_keys as /devices/platform/soc/soc:gpio_keys/input/input4
[ 1.278271] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.279326] qcom,qpnp-rtc 200f000.qcom,spmi:qcom,pm8937@0:qcom,pm8937_rtc: setting system clock to 1970-02-02 13:55:19 UTC (2814919)
[ 1.280503] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.281926] lpm_levels_of: idx 1 900
[ 1.282035] lpm_levels_of: Residency < 0 for LPM
[ 1.282040] lpm_levels_of: idx 1 400
[ 1.282323] lpm_levels: register_cluster_lpm_stats()
[ 1.282489] lpm_levels: register_cluster_lpm_stats()
[ 1.283610] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.285361] qcom,qpnp-flash-led 200f000.qcom,spmi:qcom,pmi8950@3:qcom,leds@d300: Unable to acquire pinctrl
[ 1.286080] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.288705] RNDIS_IPA module is loaded.[ 1.288722] clock_late_init: Removing enables held for handed-off clocks
[ 1.291890] mem_acc_corner: disabling
[ 1.291931] ALSA device list:
[ 1.291936] No soundcards found.
[ 1.291996] Warning: unable to open an initial console.
[ 1.310171] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xf MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.310205] Failed reading reg=5 - retry(3)
[ 1.360236] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xf MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.360266] Failed reading reg=5 - retry(4)
[ 1.371168] ipa_get_transport_type:2707 IPA HW is not supported
[ 1.371574] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.374132] msm_otg 78db000.usb: USB in low power mode
[ 1.420203] i2c-msm-v2 78b6000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0xf MSTR_STS:0x0d1300c8 OPER:0x00000010
[ 1.420235] Failed reading reg=5 rc=-107
[ 1.420244] wsa881x-i2c-codec 2-000f: failed to read wsa881x with addr f
[ 1.420251] wsa881x-i2c-codec 2-000f: failed to ping wsa with addr:f, ret = -107
[ 1.420829] pmic_analog_codec 200f000.qcom,spmi:qcom,pm8937@1:analog-codec@f000: Adsp is not loaded yet 0
[ 1.422065] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe:of read string qcom,msm-ext-pa i 0 ret 0
[ 1.422081] msm8952-asoc-wcd c051000.sound: msm8952_asoc_machine_probe: missing qcom,msm-spk-ext-pa in dt node
[ 1.422100] msm8952-asoc-wcd c051000.sound: is_ext_spk_gpio_support: missing qcom,msm-spk-ext-pa in dt node
[ 1.422117] msm8952-asoc-wcd c051000.sound: Headset is using internal micbias
[ 1.422303] Freeing unused kernel memory: 4096K
[ 1.422699] msm8952-asoc-wcd c051000.sound: ASoC: Neither/both codec name/of_node are set for SENARY_MI2S_TX
[ 1.422713] msm8952-asoc-wcd c051000.sound: ASoC: failed to init link SENARY_MI2S_TX
[ 1.422729] msm8952-asoc-wcd c051000.sound: snd_soc_register_card failed (-22)
[ 1.422758] msm8952-asoc-wcd: probe of c051000.sound failed with error -22
[ 1.426798] init: init first stage started!
[ 1.427020] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 1.428054] init: [libfs_mgr]fs_mgr_read_fstab_default(): failed to find device default fstab
[ 1.483855] EXT4-fs (mmcblk0p53): mounted filesystem without journal. Opts: barrier=1,discard
[ 1.484050] init: [libfs_mgr]__mount(source=/dev/block/platform/soc/7824900.sdhci/by-name/system,target=/system,type=ext4)=0: Success
[ 1.484182] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
[ 1.484344] init: Loading SELinux policy
[ 1.625170] audit: type=1403 audit(2814919.839:2): policy loaded auid=4294967295 ses=4294967295
[ 1.625538] selinux: SELinux: Loaded policy from /sepolicy
[ 1.625538]
[ 1.638251] selinux: SELinux: Loaded file_contexts
[ 1.638251]
[ 1.641808] init: init second stage started!
[ 1.665422] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 1.672814] selinux: SELinux: Loaded file_contexts
[ 1.672814]
[ 1.672852] init: Running restorecon...
[ 1.687430] init: waitid failed: No child processes
[ 1.687522] init: Couldn't load property file '/system/etc/prop.default': open() failed: No such file or directory: No such file or directory
[ 1.687553] init: Couldn't load property file '/prop.default': open() failed: No such file or directory: No such file or directory
[ 1.691463] init: Unable to set property '' to '' in property file '/product/build.prop': Illegal property name
[ 1.691503] init: Couldn't load property file '/odm/default.prop': open() failed: No such file or directory: No such file or directory
[ 1.691543] init: Couldn't load property file '/vendor/default.prop': open() failed: No such file or directory: No such file or directory
[ 1.750990] ueventd: ueventd started!
[ 1.758698] selinux: SELinux: Loaded file_contexts
[ 1.758698]
[ 1.759080] ueventd: Parsing file /ueventd.rc...
[ 1.760099] ueventd: Parsing file /vendor/ueventd.rc...
[ 1.763804] ueventd: Parsing file /odm/ueventd.rc...
[ 1.763858] ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory
[ 1.763885] ueventd: Parsing file /ueventd.qcom.rc...
[ 1.763917] ueventd: Unable to read config file '/ueventd.qcom.rc': open() failed: No such file or directory
[ 2.949148] ueventd: Coldboot took 1.183 seconds
[ 3.002224] pstore: Found record type 2, psi name ramoops
[ 3.002243] pstore: Found record type 7, psi name ramoops
[ 3.002250] persistent_ram: persistent_ram_annotation_merge: discarded 63
[ 3.002261] pstore: Created annotate-ramoops
[ 3.002899] Registered swp emulation handler
[ 3.023675] init: wait for '/dev/block/platform/soc/7824900.sdhci' took 0ms
[ 3.047570] EXT4-fs (mmcblk0p52): Ignoring removed nomblk_io_submit option
[ 3.062145] EXT4-fs (mmcblk0p52): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[ 3.196257] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[ 3.196257]
[ 3.196295] e2fsck: /dev/block/bootdevice/by-name/cache: clean, 20/16384 files, 2140/65536 blocks (check in 4 mounts)
[ 3.196295]
[ 3.202462] EXT4-fs (mmcblk0p52): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
[ 3.205886] EXT4-fs (mmcblk0p19): barriers disabled
[ 3.206650] EXT4-fs (mmcblk0p19): mounted filesystem with ordered data mode. Opts: barrier=0
[ 3.210119] EXT4-fs (mmcblk0p29): mounted filesystem without journal. Opts:
[ 3.213800] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
[ 3.217857] EXT4-fs (mmcblk0p30): warning: maximal mount count reached, running e2fsck is recommended
[ 3.218450] EXT4-fs (mmcblk0p30): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc
[ 3.222246] binder: 383:383 ioctl 4018620d 7ffd06dbf0 returned -22
[ 3.261338] logd.auditd: start
[ 3.261370] logd.klogd: 3261348487
[ 4.424147] ueventd: firmware: loading 'a530_pm4.fw' for '/devices/platform/soc/1c00000.qcom,kgsl-3d0/kgsl/kgsl-3d0/a530_pm4.fw'
[ 4.560277] of_batterydata_get_best_profile: No battery data found
[ 4.560295] FG: fg_batt_profile_init: couldn't find profile handle rc=0
[ 6.719722] fsck.f2fs: Info: Fix the reported corruption.
[ 6.719722]
[ 6.719763] fsck.f2fs: Info: No support kernel version!
[ 6.719763]
[ 6.719776] fsck.f2fs: Info: Segments per section = 1
[ 6.719776]
[ 6.719788] fsck.f2fs: Info: Sections per zone = 1
[ 6.719788]
[ 6.719800] fsck.f2fs: Info: sector size = 512
[ 6.719800]
[ 6.719812] fsck.f2fs: Info: total sectors = 21032927 (10269 MB)
[ 6.719812]
[ 6.719824] fsck.f2fs: Info: MKFS version
[ 6.719824]
[ 6.719839] fsck.f2fs: "Linux version 3.18.31-lineage-g4f1aeda (jenkins@stuff) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Aug 11 22:24:02 UTC 2019"
[ 6.719839]
[ 6.719851] fsck.f2fs: Info: FSCK version
[ 6.719851]
[ 6.719863] fsck.f2fs: from "4.9.112-perf+ #6 SMP PREEMPT Sat Dec 7 21:07:44 CET 2019"
[ 6.719863]
[ 6.779655] F2FS-fs (mmcblk0p54): Mounted with checkpoint version = 10e49
[ 6.780582] init: [libfs_mgr]__mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=f2fs)=0: Success
[ 6.783052] init: 20 output lines suppressed due to ratelimiting
[ 6.783662] init: Command 'mount_all /system/vendor/etc/fstab.qcom --late' action=late-fs (/vendor/etc/init/hw/init.qcom.rc:63) took 2928ms and succeeded
[ 6.784099] init: Received control message 'interface_start' for '[email protected]::IComposer/default' from pid: 383 (/system/bin/hwservicemanager)
[ 6.784146] init: Could not find service hosting interface [email protected]::IComposer/default
[ 6.784551] init: wait for '/dev/block/bootdevice/by-name/persist' took 0ms
[ 6.785764] init: Received control message 'interface_start' for '[email protected]::IComposer/default' from pid: 383 (/system/bin/hwservicemanager)
[ 6.785800] init: Could not find service hosting interface [email protected]::IComposer/default
[ 6.810291] init: wait for '/dev/block/bootdevice/by-name/dsp' took 0ms
[ 6.813305] init: processing action (post-fs-data) from (/init.rc:389)
[ 6.814402] init: starting service 'vold'...
[ 6.951181] init: starting service 'exec 1 (/system/bin/vdc --wait cryptfs init_user0)'...
[ 6.952363] init: SVC_EXEC pid 442 (uid 0 gid 0+0 context default) started; waiting...
[ 7.046894] type=1400 audit(2814925.259:3): avc: denied { create } for pid=366 comm="init" name="dts" scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 7.171980] ueventd: firmware: loading 'adsp.mdt' for '/devices/platform/soc/c200000.qcom,lpass/firmware/adsp.mdt'
[ 7.175052] type=1400 audit(2814925.259:3): avc: denied { create } for pid=366 comm="init" name="dts" scontext=u:r:vendor_init:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 7.175096] type=1400 audit(2814925.389:4): avc: denied { write } for pid=1 comm="init" name="disable_restart_work" dev="sysfs" ino=17805 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 7.175571] type=1400 audit(2814925.389:4): avc: denied { write } for pid=1 comm="init" name="disable_restart_work" dev="sysfs" ino=17805 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 7.175603] type=1400 audit(2814925.389:5): avc: denied { open } for pid=1 comm="init" path="/sys/module/subsystem_restart/parameters/disable_restart_work" dev="sysfs" ino=17805 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 7.186757] subsys-pil-tz c200000.qcom,lpass: adsp: loading from 0x000000008b800000 to 0x000000008c900000
[ 7.187407] ueventd: loading /devices/platform/soc/c200000.qcom,lpass/firmware/adsp.mdt took 15ms
[ 7.188757] logd.daemon: reinit
[ 7.197715] ueventd: firmware: loading 'adsp.b02' for '/devices/platform/soc/c200000.qcom,lpass/firmware/adsp.b02'
[ 7.199375] ueventd: loading /devices/platform/soc/c200000.qcom,lpass/firmware/adsp.b02 took 1ms
[ 7.200887] ueventd: firmware: loading 'adsp.b03' for '/devices/platform/soc/c200000.qcom,lpass/firmware/adsp.b03'
[ 7.204515] ueventd: loading /devices/platform/soc/c200000.qcom,lpass/firmware/adsp.b03 took 3ms
[ 7.206270] ueventd: firmware: loading 'adsp.b04' for '/devices/platform/soc/c200000.qcom,lpass/firmware/adsp.b04'
[ 7.249050] ueventd: loading /devices/platform/soc/c200000.qcom,lpass/firmware/adsp.b04 took 42ms
[ 7.255236] ueventd: firmware: loading 'adsp.b05' for '/devices/platform/soc/c200000.qcom,lpass/firmware/adsp.b05'
[ 7.271136] ueventd: loading /devices/platform/soc/c200000.qcom,lpass/firmware/adsp.b05 took 16ms
[ 7.342148] [email protected]: wakealarm_init: timerfd_create failed
[ 7.442263] type=1400 audit(2814925.389:5): avc: denied { open } for pid=1 comm="init" path="/sys/module/subsystem_restart/parameters/disable_restart_work" dev="sysfs" ino=17805 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 7.442317] type=1400 audit(2814925.659:6): avc: denied { getattr } for pid=497 comm="tftp_server" path="/persist/rfs" dev="mmcblk0p30" ino=44 scontext=u:r:rfs_access:s0 tcontext=u:object_r:persist_file:s0 tclass=dir permissive=1
[ 7.462193] rmt_storage:INFO:check_support_using_libmdm: Modem subsystem found on target!
[ 7.480871] rmt_storage:INFO:main: Done with init now waiting for messages!
[ 7.500607] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 7.500648] QSEECOM: qseecom_register_listener: Service 8192 is registered
[ 7.508790] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 7.508839] QSEECOM: qseecom_register_listener: Service 12288 is registered
[ 7.547913] init.mmi.laser.sh: Error: the calibration sys file not show up
[ 7.638381] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 7.638420] QSEECOM: qseecom_register_listener: Service 16384 is registered
[ 7.642814] Process pm-service granted CAP_NET_RAW from Android group net_raw.
[ 7.642834] Please update the .rc file to explictly set 'capabilities NET_RAW'
[ 7.642841] Implicit grants are deprecated and will be removed in the future.
[ 7.643017] subsys-pil-tz c200000.qcom,lpass: adsp: Brought out of reset
[ 7.652896] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 7.652960] QSEECOM: qseecom_register_listener: Service 11 is registered
[ 7.655992] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 7.656080] QSEECOM: qseecom_register_listener: Service 10 is registered
[ 7.668607] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 7.668652] QSEECOM: qseecom_register_listener: Service 28672 is registered
[ 7.670811] mdss_mdp_pp_get_version: unsupported feature 11
[ 7.675753] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 7.675796] QSEECOM: qseecom_register_listener: Service 36864 is registered
[ 7.677352] subsys-pil-tz c200000.qcom,lpass: Subsystem error monitoring/handling services are up
[ 7.677356] subsys-pil-tz c200000.qcom,lpass: adsp: Power/Clock ready interrupt received
[ 7.679116] diag: In diag_send_feature_mask_update, control channel is not open, p: 1, 0000000000000000
[ 7.679142] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1
[ 7.679626] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 1
[ 7.683881] scm_call failed: func id 0x72000206, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 7.683928] QSEECOM: qseecom_register_listener: Service 4352 is registered
[ 7.701736] apr_tal:Q6 Is Up
[ 7.782934] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and adsp's SSCTL service
[ 8.167784] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x19 (ok)
[ 8.168462] synaptics_dsx_sensor_state: state change STANDBY -> ACTIVE
[ 8.730292] mdss_dsi_on[0]+.
[ 8.730309] mdss_dsi_on[0]-.
[ 8.740339] mdss_dsi_post_panel_on[0]-.
[ 10.786749] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[ 12.567762] init: wait for '/sys/kernel/aov/event' timed out and took 5001ms
[ 12.567827] init: Command 'wait /sys/kernel/aov/event' action=boot (/system/vendor/etc/init/hw/init.mmi.rc:267) took 5002ms and failed: wait_for_file() failed
[ 12.568560] init: starting service 'vendor.vibrator-1-0'...
[ 12.570815] init: Service 'sysinit' (pid 446) exited with status 0
[ 12.573710] init: Received control message 'interface_start' for '[email protected]::IDevicesFactory/msd' from pid: 383 (/system/bin/hwservicemanager)
[ 12.573802] init: Could not find service hosting interface [email protected]::IDevicesFactory/msd
[ 12.577147] type=1400 audit(2814925.659:7): avc: denied { dac_override } for pid=497 comm="tftp_server" capability=1 scontext=u:r:rfs_access:s0 tcontext=u:r:rfs_access:s0 tclass=capability permissive=1
[ 12.577194] type=1400 audit(2814930.789:8): avc: denied { write } for pid=1 comm="init" name="debug_mask" dev="sysfs" ino=18266 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 12.577512] type=1400 audit(2814930.789:8): avc: denied { write } for pid=1 comm="init" name="debug_mask" dev="sysfs" ino=18266 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 12.577542] type=1400 audit(2814930.789:9): avc: denied { open } for pid=1 comm="init" path="/sys/module/binder/parameters/debug_mask" dev="sysfs" ino=18266 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 12.586869] init: Received control message 'start' for 'bootanim' from pid: 415 (/system/bin/surfaceflinger)
[ 12.587501] init: processing action (boot) from (/system/vendor/etc/init/hw/init.mmi.usb.rc:31)
[ 12.602622] init: Service 'vendor.vibrator-1-0' (pid 608) exited with status 254
[ 12.602663] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 608) process group...
[ 12.738802] subsys-restart: __subsystem_get(): Changing subsys fw_name to modem
[ 12.742534] ipa_get_ipc_logbuf_low:3216 IPA HW is not supported
[ 12.743227] 'opened /dev/adsprpc-smd c 222 0'
[ 12.746256] ueventd: firmware: loading 'modem.mdt' for '/devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt'
[ 12.752552] wcnss: wcnss_wlan triggered by userspace
[ 12.753680] wcnss: wcnss_pm_qos_add_request: add request
[ 12.753714] wcnss: wcnss_pm_qos_update_request: update request 100
[ 12.760447] wcnss: wcnss_notif_cb: notification event: 2 : SUBSYS_BEFORE_POWERUP
[ 12.763471] ueventd: firmware: loading 'wcnss.mdt' for '/devices/platform/soc/a21b000.qcom,pronto/firmware/wcnss.mdt'
[ 12.764424] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x0000000086800000 to 0x000000008b800000
[ 12.764438] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/modem.mdt took 19ms
[ 12.766934] ipa_get_ipc_logbuf_low:3216 IPA HW is not supported
[ 12.769168] ueventd: loading /devices/platform/soc/a21b000.qcom,pronto/firmware/wcnss.mdt took 5ms
[ 12.770114] subsys-pil-tz a21b000.qcom,pronto: wcnss: loading from 0x000000008c900000 to 0x000000008cf44000
[ 12.771535] wcnss: wcnss_notif_cb: notification event: 6 : SUBSYS_PROXY_VOTE
[ 12.772979] wcnss: IRIS Reg: 04000004
[ 12.777363] ueventd: firmware: loading 'mba.mbn' for '/devices/platform/soc/4080000.qcom,mss/firmware/mba.mbn'
[ 12.780837] stml0xx spi4.0: stml0xx_reset
[ 12.783142] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/mba.mbn took 5ms
[ 12.787511] ueventd: firmware: loading 'msadp' for '/devices/platform/soc/4080000.qcom,mss/firmware/msadp'
[ 12.800301] ueventd: firmware: could not find firmware for msadp
[ 12.800458] ueventd: loading /devices/platform/soc/4080000.qcom,mss/firmware/msadp took 13ms
[ 12.802016] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue.
[ 12.808298] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x00000000d6900000 to 0x00000000d6a00000
[ 12.819923] ueventd: firmware: loading 'wcnss.b02' for '/devices/platform/soc/a21b000.qcom,pronto/firmware/wcnss.b02'
[ 12.883037] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
[ 12.883594] alloc_contig_range: [d5c9e, d5ca0) PFNs busy
[ 13.140376] subsys-pil-tz a21b000.qcom,pronto: wcnss: Brought out of reset
[ 13.162345] QSEECOM: qseecom_load_app: App (fpctzappfingerprint) does'nt exist, loading apps for first time
[ 13.339863] Process lowi-server granted CAP_NET_ADMIN from Android group net_admin.
[ 13.339891] Please update the .rc file to explictly set 'capabilities NET_ADMIN'
[ 13.339896] Implicit grants are deprecated and will be removed in the future.
[ 13.478675] QSEECOM: qseecom_load_app: App with id 196611 (fpctzappfingerprint) now loaded
[ 13.481390] input: uinput-fpc as /devices/virtual/input/input5
[ 13.606175] subsys-pil-tz a21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received
[ 13.607775] wcnss: wcnss_notif_cb: notification event: 7 : SUBSYS_PROXY_UNVOTE
[ 13.621889] subsys-pil-tz a21b000.qcom,pronto: Subsystem error monitoring/handling services are up
[ 13.624399] wcnss: wcnss_notif_cb: notification event: 3 : SUBSYS_AFTER_POWERUP
[ 13.624472] wcnss: wcnss_pm_qos_update_request: update request -1
[ 13.624483] wcnss: wcnss_pm_qos_remove_request: remove request
[ 13.627022] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, 0000000000000000
[ 13.627053] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 2
[ 13.710455] QSEECOM: qseecom_unload_app: App id 196611 now unloaded
[ 13.743885] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
[ 13.776926] wcnss: wcnss_wlan_ctrl_probe: SMD ctrl channel up
[ 13.777417] wcnss: version 01050102
[ 13.777435] wcnss: schedule dnld work for pronto
[ 13.777445] wcnss: NV download[ 13.777724] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 2
[ 13.777746] wcnss: build version CNSS-PR-4-0-542-157106-1
[ 13.787010] wcnss: NV bin size: 31719, total_fragments: 11
[ 13.787103] wcnss: no space available for smd frame
[ 13.810158] wcnss: no space available for smd frame
[ 13.823458] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
[ 13.823478] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
[ 13.825129] ipa_get_ipc_logbuf_low:3216 IPA HW is not supported
[ 13.826743] ipa_get_ipc_logbuf_low:3216 IPA HW is not supported
[ 13.833275] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
[ 13.833776] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs1!
[ 13.835324] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs2!
[ 13.835659] type=1400 audit(2814930.789:9): avc: denied { open } for pid=1 comm="init" path="/sys/module/binder/parameters/debug_mask" dev="sysfs" ino=18266 scontext=u:r:init:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 13.835713] type=1400 audit(1575711108.089:10): avc: denied { write } for pid=675 comm="rild" name="cutback" dev="mmcblk0p54" ino=15948 scontext=u:r:rild:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 13.836205] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsg!
[ 13.840148] wcnss: no space available for smd frame
[ 13.842844] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsc!
[ 13.844985] rmt_storage:INFO:rmt_storage_alloc_buff_cb: Received req_size: 0! avail: 1572864
[ 13.845689] type=1400 audit(1575711108.089:10): avc: denied { write } for pid=675 comm="rild" name="cutback" dev="mmcblk0p54" ino=15948 scontext=u:r:rild:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 13.845738] type=1400 audit(1575711108.089:11): avc: denied { add_name } for pid=675 comm="rild" name="cutback_ipc" scontext=u:r:rild:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 13.845859] type=1400 audit(1575711108.089:11): avc: denied { add_name } for pid=675 comm="rild" name="cutback_ipc" scontext=u:r:rild:s0 tcontext=u:object_r:system_data_file:s0 tclass=dir permissive=1
[ 13.845880] type=1400 audit(1575711108.089:12): avc: denied { create } for pid=675 comm="rild" name="cutback_ipc" scontext=u:r:rild:s0 tcontext=u:object_r:system_data_file:s0 tclass=sock_file permissive=1
[ 13.846335] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs1
[ 13.846534] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=512, size=512]for /boot/modem_fs1!
[ 13.847707] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /boot/modem_fs1!
[ 13.848821] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs2
[ 13.849127] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=512, size=512]for /boot/modem_fs2!
[ 13.880153] wcnss: no space available for smd frame
[ 14.289940] apr_tal:Modem Is Up
[ 14.290857] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 14.290872] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 14.290880] memshare: hyp_assign_phys failed size=5242880 err=-5
[ 14.298498] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, 0000000000000000
[ 14.298523] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 0
[ 14.299657] diag: In diag_send_peripheral_buffering_mode, buffering flag not set for 0
[ 14.550273] scm_call failed: func id 0x42000c16, ret: -1, syscall returns: 0x0, 0x0, 0x0
[ 14.550298] batched_hyp_assign: Failed to assign memory protection, ret = -5
[ 14.550310] memshare: hyp_assign_phys failed size=2097152 err=-5
[ 14.624482] sps:BAM 0x0000000004044000 is registered.[ 14.624608] sps:BAM 0x0000000004044000 (va:0x0000000000000000) enabled: ver:0x27, number of pipes:6
[ 16.127034] ip_local_port_range: prefer different parity for start/end values.
[ 17.571546] init: starting service 'vendor.vibrator-1-0'...
[ 17.602731] init: Service 'vendor.vibrator-1-0' (pid 1234) exited with status 254
[ 17.602772] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1234) process group...
[ 17.602931] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1234 in 0ms
[ 17.912237] init: starting service 'vendor.qcamerasvr'...
[ 18.829743] init: Service 'vendor.qcamerasvr' (pid 1254) exited with status 0
[ 18.829782] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1254) process group...
[ 18.829907] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1254 in 0ms
[ 22.577784] init: starting service 'vendor.vibrator-1-0'...
[ 22.603805] init: Service 'vendor.vibrator-1-0' (pid 1262) exited with status 254
[ 22.603844] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1262) process group...
[ 22.603959] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1262 in 0ms
[ 22.914795] init: starting service 'vendor.qcamerasvr'...
[ 23.783963] init: Service 'vendor.qcamerasvr' (pid 1266) exited with status 0
[ 23.783999] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1266) process group...
[ 23.784149] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1266 in 0ms
[ 24.434887] stml0xx spi4.0: stml0xx_reset
[ 27.568962] init: Service 'motosh' (pid 637) exited with status 0
[ 27.579272] init: starting service 'vendor.vibrator-1-0'...
[ 27.603164] init: Service 'vendor.vibrator-1-0' (pid 1270) exited with status 254
[ 27.917151] init: starting service 'vendor.qcamerasvr'...
[ 28.809665] init: Service 'vendor.qcamerasvr' (pid 1271) exited with status 0
[ 28.809704] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1271) process group...
[ 28.809842] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1271 in 0ms
[ 32.584855] init: starting service 'vendor.vibrator-1-0'...
[ 32.609991] init: Service 'vendor.vibrator-1-0' (pid 1274) exited with status 254
[ 32.610205] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1274) process group...
[ 32.610349] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1274 in 0ms
[ 32.919224] init: starting service 'vendor.qcamerasvr'...
[ 33.822257] init: Service 'vendor.qcamerasvr' (pid 1275) exited with status 0
[ 33.822296] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1275) process group...
[ 33.822427] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1275 in 0ms
[ 37.590240] init: starting service 'vendor.vibrator-1-0'...
[ 37.614182] init: Service 'vendor.vibrator-1-0' (pid 1278) exited with status 254
[ 37.614224] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1278) process group...
[ 37.614350] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1278 in 0ms
[ 37.921318] init: starting service 'vendor.qcamerasvr'...
[ 38.828815] init: Service 'vendor.qcamerasvr' (pid 1279) exited with status 0
[ 38.828852] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1279) process group...
[ 42.595842] init: starting service 'vendor.vibrator-1-0'...
[ 42.620455] init: Service 'vendor.vibrator-1-0' (pid 1282) exited with status 254
[ 42.620495] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1282) process group...
[ 42.620663] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1282 in 0ms
[ 42.923516] init: starting service 'vendor.qcamerasvr'...
[ 42.988667] init: Service 'vendor.thermal-engine' (pid 613) exited with status 1
[ 42.988709] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 613) process group...
[ 42.988908] libprocessgroup: Successfully killed process cgroup uid 0 pid 613 in 0ms
[ 42.990735] init: starting service 'vendor.thermal-engine'...
[ 42.992554] init: Created socket '/dev/socket/thermal-send-client', mode 666, user 1000, group 1000
[ 47.601179] init: starting service 'vendor.vibrator-1-0'...
[ 47.626662] init: Service 'vendor.vibrator-1-0' (pid 1315) exited with status 254
[ 47.626705] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1315) process group...
[ 47.626835] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1315 in 0ms
[ 47.925790] init: starting service 'vendor.qcamerasvr'...
[ 48.141459] init: Received control message 'interface_start' for '[email protected]::ISoundTriggerHw/default' from pid: 383 (/system/bin/hwservicemanager)
[ 48.141530] init: Could not find service hosting interface [email protected]::ISoundTriggerHw/default
[ 48.789295] init: Service 'vendor.qcamerasvr' (pid 1316) exited with status 0
[ 48.789333] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1316) process group...
[ 48.789483] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1316 in 0ms
[ 52.631216] init: Service 'vendor.vibrator-1-0' (pid 1322) exited with status 254
[ 52.631256] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1322) process group...
[ 52.631378] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1322 in 0ms
[ 52.928187] init: starting service 'vendor.qcamerasvr'...
[ 53.830432] init: Service 'vendor.qcamerasvr' (pid 1323) exited with status 0
[ 53.830476] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1323) process group...
[ 53.830664] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1323 in 0ms
[ 57.612448] init: starting service 'vendor.vibrator-1-0'...
[ 57.637943] init: Service 'vendor.vibrator-1-0' (pid 1326) exited with status 254
[ 57.637984] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1326) process group...
[ 57.929892] init: starting service 'vendor.qcamerasvr'...
[ 58.830632] init: Service 'vendor.qcamerasvr' (pid 1327) exited with status 0
[ 58.830669] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1327) process group...
[ 58.830799] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1327 in 0ms
[ 62.616407] init: starting service 'vendor.vibrator-1-0'...
[ 62.641770] init: Service 'vendor.vibrator-1-0' (pid 1330) exited with status 254
[ 62.641810] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1330) process group...
[ 62.641927] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1330 in 0ms
[ 62.931704] init: starting service 'vendor.qcamerasvr'...
[ 63.833359] init: Service 'vendor.qcamerasvr' (pid 1331) exited with status 0
[ 63.833396] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1331) process group...
[ 63.833530] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1331 in 0ms
[ 67.622274] init: starting service 'vendor.vibrator-1-0'...
[ 67.647094] init: Service 'vendor.vibrator-1-0' (pid 1334) exited with status 254
[ 67.647136] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1334) process group...
[ 67.647266] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1334 in 0ms
[ 67.934228] init: starting service 'vendor.qcamerasvr'...
[ 68.838430] init: Service 'vendor.qcamerasvr' (pid 1335) exited with status 0
[ 68.838468] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1335) process group...
[ 68.838607] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1335 in 0ms
[ 72.627600] init: starting service 'vendor.vibrator-1-0'...
[ 72.652510] init: Service 'vendor.vibrator-1-0' (pid 1338) exited with status 254
[ 72.652553] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1338) process group...
[ 72.652694] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1338 in 0ms
[ 72.936615] init: starting service 'vendor.qcamerasvr'...
[ 73.140493] init: Service 'vendor.thermal-engine' (pid 1284) exited with status 1
[ 73.140533] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1284) process group...
[ 73.849576] init: Service 'vendor.qcamerasvr' (pid 1339) exited with status 0
[ 73.849613] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1339) process group...
[ 73.849747] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1339 in 0ms
[ 77.633644] init: starting service 'vendor.vibrator-1-0'...
[ 77.658172] init: Service 'vendor.vibrator-1-0' (pid 1371) exited with status 254
[ 77.658213] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1371) process group...
[ 77.658338] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1371 in 0ms
[ 77.939222] init: starting service 'vendor.qcamerasvr'...
[ 78.840686] init: Service 'vendor.qcamerasvr' (pid 1372) exited with status 0
[ 78.840723] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1372) process group...
[ 82.639649] init: starting service 'vendor.vibrator-1-0'...
[ 82.664788] init: Service 'vendor.vibrator-1-0' (pid 1375) exited with status 254
[ 82.664827] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1375) process group...
[ 82.664942] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1375 in 0ms
[ 82.941757] init: starting service 'vendor.qcamerasvr'...
[ 83.840959] init: Service 'vendor.qcamerasvr' (pid 1376) exited with status 0
[ 83.840997] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1376) process group...
[ 83.841121] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1376 in 0ms
[ 87.645870] init: starting service 'vendor.vibrator-1-0'...
[ 87.669905] init: Service 'vendor.vibrator-1-0' (pid 1379) exited with status 254
[ 87.669946] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1379) process group...
[ 87.670184] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1379 in 0ms
[ 87.944250] init: starting service 'vendor.qcamerasvr'...
[ 88.842035] init: Service 'vendor.qcamerasvr' (pid 1380) exited with status 0
[ 88.842073] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1380) process group...
[ 88.842201] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1380 in 0ms
[ 92.650592] init: starting service 'vendor.vibrator-1-0'...
[ 92.675454] init: Service 'vendor.vibrator-1-0' (pid 1383) exited with status 254
[ 92.675497] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1383) process group...
[ 92.675632] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1383 in 0ms
[ 92.946529] init: starting service 'vendor.qcamerasvr'...
[ 93.848989] init: Service 'vendor.qcamerasvr' (pid 1384) exited with status 0
[ 93.849039] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1384) process group...
[ 93.849209] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1384 in 0ms
[ 97.656578] init: starting service 'vendor.vibrator-1-0'...
[ 97.681042] init: Service 'vendor.vibrator-1-0' (pid 1387) exited with status 254
[ 97.681083] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1387) process group...
[ 97.681207] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1387 in 0ms
[ 97.949027] init: starting service 'vendor.qcamerasvr'...
[ 98.850810] init: Service 'vendor.qcamerasvr' (pid 1388) exited with status 0
[ 98.850846] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1388) process group...
[ 98.850971] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1388 in 0ms
[ 102.661959] init: starting service 'vendor.vibrator-1-0'...
[ 102.687888] init: Service 'vendor.vibrator-1-0' (pid 1391) exited with status 254
[ 102.687929] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1391) process group...
[ 102.950865] init: starting service 'vendor.qcamerasvr'...
[ 103.287409] init: Service 'vendor.thermal-engine' (pid 1340) exited with status 1
[ 103.287449] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1340) process group...
[ 103.287577] libprocessgroup: Successfully killed process cgroup uid 0 pid 1340 in 0ms
[ 103.288967] init: starting service 'vendor.thermal-engine'...
[ 103.291302] init: Created socket '/dev/socket/thermal-send-client', mode 666, user 1000, group 1000
[ 103.291959] init: Created socket '/dev/socket/thermal-recv-client', mode 660, user 1000, group 1000
[ 103.292356] init: Created socket '/dev/socket/thermal-recv-passive-client', mode 666, user 1000, group 1000
[ 103.292816] init: Created socket '/dev/socket/thermal-send-rule', mode 660, user 1000, group 1000
[ 103.868364] init: Service 'vendor.qcamerasvr' (pid 1392) exited with status 0
[ 108.850443] init: Service 'vendor.qcamerasvr' (pid 1425) exited with status 0
[ 108.850482] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1425) process group...
[ 108.850610] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1425 in 0ms
[ 112.670735] init: starting service 'vendor.vibrator-1-0'...
[ 112.694997] init: Service 'vendor.vibrator-1-0' (pid 1428) exited with status 254
[ 112.695037] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1428) process group...
[ 112.695159] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1428 in 0ms
[ 112.955939] init: starting service 'vendor.qcamerasvr'...
[ 113.857855] init: Service 'vendor.qcamerasvr' (pid 1429) exited with status 0
[ 113.857896] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1429) process group...
[ 117.675938] init: starting service 'vendor.vibrator-1-0'...
[ 117.701101] init: Service 'vendor.vibrator-1-0' (pid 1432) exited with status 254
[ 117.701141] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1432) process group...
[ 117.701265] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1432 in 0ms
[ 117.957958] init: starting service 'vendor.qcamerasvr'...
[ 118.857934] init: Service 'vendor.qcamerasvr' (pid 1433) exited with status 0
[ 118.857972] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1433) process group...
[ 118.858100] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1433 in 0ms
[ 122.680662] init: starting service 'vendor.vibrator-1-0'...
[ 122.704728] init: Service 'vendor.vibrator-1-0' (pid 1436) exited with status 254
[ 122.704769] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1436) process group...
[ 122.704892] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1436 in 0ms
[ 122.959715] init: starting service 'vendor.qcamerasvr'...
[ 123.858056] init: Service 'vendor.qcamerasvr' (pid 1437) exited with status 0
[ 123.858093] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1437) process group...
[ 123.858228] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1437 in 0ms
[ 127.686033] init: starting service 'vendor.vibrator-1-0'...
[ 127.711116] init: Service 'vendor.vibrator-1-0' (pid 1440) exited with status 254
[ 127.711158] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1440) process group...
[ 127.711297] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1440 in 0ms
[ 127.962163] init: starting service 'vendor.qcamerasvr'...
[ 128.870191] init: Service 'vendor.qcamerasvr' (pid 1441) exited with status 0
[ 128.870230] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1441) process group...
[ 128.870367] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1441 in 0ms
[ 132.690771] init: starting service 'vendor.vibrator-1-0'...
[ 132.715367] init: Service 'vendor.vibrator-1-0' (pid 1444) exited with status 254
[ 132.715407] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1444) process group...
[ 132.835021] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Write iovec request received for /boot/modem_fs2
[ 132.835189] rmt_storage:INFO:rmt_storage_client_thread: Calling Write [offset=0, size=917504]for /boot/modem_fs2!
[ 132.912134] rmt_storage:INFO:rmt_storage_client_thread: Done Write (bytes = 917504) for /boot/modem_fs2!
[ 132.964341] init: starting service 'vendor.qcamerasvr'...
[ 133.436179] init: Service 'vendor.thermal-engine' (pid 1393) exited with status 1
[ 133.436219] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1393) process group...
[ 133.436354] libprocessgroup: Successfully killed process cgroup uid 0 pid 1393 in 0ms
[ 133.437712] init: starting service 'vendor.thermal-engine'...
[ 133.439646] init: Created socket '/dev/socket/thermal-send-client', mode 666, user 1000, group 1000
[ 133.440516] init: Created socket '/dev/socket/thermal-recv-client', mode 660, user 1000, group 1000
[ 133.440989] init: Created socket '/dev/socket/thermal-recv-passive-client', mode 666, user 1000, group 1000
[ 133.441444] init: Created socket '/dev/socket/thermal-send-rule', mode 660, user 1000, group 1000
[ 133.835009] init: Service 'vendor.qcamerasvr' (pid 1445) exited with status 0
[ 138.866656] init: Service 'vendor.qcamerasvr' (pid 1478) exited with status 0
[ 138.866693] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1478) process group...
[ 138.866827] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1478 in 0ms
[ 142.701733] init: starting service 'vendor.vibrator-1-0'...
[ 142.726138] init: Service 'vendor.vibrator-1-0' (pid 1481) exited with status 254
[ 142.726179] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1481) process group...
[ 142.726306] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1481 in 0ms
[ 142.969230] init: starting service 'vendor.qcamerasvr'...
[ 143.874747] init: Service 'vendor.qcamerasvr' (pid 1482) exited with status 0
[ 143.874796] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1482) process group...
[ 143.874966] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1482 in 0ms
[ 147.707897] init: starting service 'vendor.vibrator-1-0'...
[ 147.733029] init: Service 'vendor.vibrator-1-0' (pid 1485) exited with status 254
[ 147.733070] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1485) process group...
[ 147.733197] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1485 in 0ms
[ 147.971967] init: starting service 'vendor.qcamerasvr'...
[ 148.876602] init: Service 'vendor.qcamerasvr' (pid 1486) exited with status 0
[ 148.876641] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1486) process group...
[ 152.710853] init: starting service 'vendor.vibrator-1-0'...
[ 152.735506] init: Service 'vendor.vibrator-1-0' (pid 1489) exited with status 254
[ 152.735546] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1489) process group...
[ 152.735670] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1489 in 0ms
[ 152.974458] init: starting service 'vendor.qcamerasvr'...
[ 153.875844] init: Service 'vendor.qcamerasvr' (pid 1490) exited with status 0
[ 153.875882] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1490) process group...
[ 153.876016] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1490 in 0ms
[ 157.717052] init: starting service 'vendor.vibrator-1-0'...
[ 157.742053] init: Service 'vendor.vibrator-1-0' (pid 1493) exited with status 254
[ 157.742101] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1493) process group...
[ 157.742221] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1493 in 0ms
[ 157.977185] init: starting service 'vendor.qcamerasvr'...
[ 158.882593] init: Service 'vendor.qcamerasvr' (pid 1494) exited with status 0
[ 158.882636] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1494) process group...
[ 158.882825] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1494 in 0ms
[ 162.723038] init: starting service 'vendor.vibrator-1-0'...
[ 162.747721] init: Service 'vendor.vibrator-1-0' (pid 1497) exited with status 254
[ 162.747760] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1497) process group...
[ 162.979687] init: starting service 'vendor.qcamerasvr'...
[ 163.585468] init: Service 'vendor.thermal-engine' (pid 1446) exited with status 1
[ 163.585508] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1446) process group...
[ 163.585636] libprocessgroup: Successfully killed process cgroup uid 0 pid 1446 in 0ms
[ 163.587001] init: starting service 'vendor.thermal-engine'...
[ 163.588721] init: Created socket '/dev/socket/thermal-send-client', mode 666, user 1000, group 1000
[ 163.589119] init: Created socket '/dev/socket/thermal-recv-client', mode 660, user 1000, group 1000
[ 163.589411] init: Created socket '/dev/socket/thermal-recv-passive-client', mode 666, user 1000, group 1000
[ 163.589701] init: Created socket '/dev/socket/thermal-send-rule', mode 660, user 1000, group 1000
[ 163.891066] init: Service 'vendor.qcamerasvr' (pid 1498) exited with status 0
[ 167.982382] init: starting service 'vendor.qcamerasvr'...
[ 168.883801] init: Service 'vendor.qcamerasvr' (pid 1531) exited with status 0
[ 168.883839] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1531) process group...
[ 168.883969] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1531 in 0ms
[ 172.735007] init: starting service 'vendor.vibrator-1-0'...
[ 172.759672] init: Service 'vendor.vibrator-1-0' (pid 1534) exited with status 254
[ 172.759712] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1534) process group...
[ 172.759834] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1534 in 0ms
[ 172.984863] init: starting service 'vendor.qcamerasvr'...
[ 173.884130] init: Service 'vendor.qcamerasvr' (pid 1535) exited with status 0
[ 173.884168] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1535) process group...
[ 173.884300] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1535 in 0ms
[ 177.741163] init: starting service 'vendor.vibrator-1-0'...
[ 177.766849] init: Service 'vendor.vibrator-1-0' (pid 1538) exited with status 254
[ 177.766892] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1538) process group...
[ 177.767034] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1538 in 0ms
[ 177.986891] init: starting service 'vendor.qcamerasvr'...
[ 178.888090] init: Service 'vendor.qcamerasvr' (pid 1539) exited with status 0
[ 178.888130] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1539) process group...
[ 182.746581] init: starting service 'vendor.vibrator-1-0'...
[ 182.771607] init: Service 'vendor.vibrator-1-0' (pid 1542) exited with status 254
[ 182.771648] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1542) process group...
[ 182.771769] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1542 in 0ms
[ 182.988547] init: starting service 'vendor.qcamerasvr'...
[ 183.885884] init: Service 'vendor.qcamerasvr' (pid 1543) exited with status 0
[ 183.885922] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1543) process group...
[ 183.886058] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1543 in 0ms
[ 187.753111] init: starting service 'vendor.vibrator-1-0'...
[ 187.778206] init: Service 'vendor.vibrator-1-0' (pid 1546) exited with status 254
[ 187.778253] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1546) process group...
[ 187.778429] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1546 in 0ms
[ 187.990347] init: starting service 'vendor.qcamerasvr'...
[ 188.890180] init: Service 'vendor.qcamerasvr' (pid 1547) exited with status 0
[ 188.890217] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1547) process group...
[ 188.890350] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1547 in 0ms
[ 192.756828] init: starting service 'vendor.vibrator-1-0'...
[ 192.781739] init: Service 'vendor.vibrator-1-0' (pid 1550) exited with status 254
[ 192.781778] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1550) process group...
[ 192.781893] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1550 in 0ms
[ 192.992782] init: starting service 'vendor.qcamerasvr'...
[ 193.734519] init: Service 'vendor.thermal-engine' (pid 1499) exited with status 1
[ 193.734559] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1499) process group...
[ 193.734689] libprocessgroup: Successfully killed process cgroup uid 0 pid 1499 in 0ms
[ 193.736006] init: starting service 'vendor.thermal-engine'...
[ 193.737758] init: Created socket '/dev/socket/thermal-send-client', mode 666, user 1000, group 1000
[ 193.738153] init: Created socket '/dev/socket/thermal-recv-client', mode 660, user 1000, group 1000
[ 197.994540] init: starting service 'vendor.qcamerasvr'...
[ 198.920320] init: Service 'vendor.qcamerasvr' (pid 1584) exited with status 0
[ 198.920357] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1584) process group...
[ 198.920489] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1584 in 0ms
[ 202.768427] init: starting service 'vendor.vibrator-1-0'...
[ 202.793579] init: Service 'vendor.vibrator-1-0' (pid 1587) exited with status 254
[ 202.793620] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1587) process group...
[ 202.793742] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1587 in 0ms
[ 202.996575] init: starting service 'vendor.qcamerasvr'...
[ 203.897071] init: Service 'vendor.qcamerasvr' (pid 1588) exited with status 0
[ 203.897109] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1588) process group...
[ 203.897244] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1588 in 0ms
[ 207.770712] init: starting service 'vendor.vibrator-1-0'...
[ 207.795079] init: Service 'vendor.vibrator-1-0' (pid 1591) exited with status 254
[ 207.795120] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1591) process group...
[ 207.795242] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1591 in 0ms
[ 207.999004] init: starting service 'vendor.qcamerasvr'...
[ 208.905686] init: Service 'vendor.qcamerasvr' (pid 1592) exited with status 0
[ 208.905724] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1592) process group...
[ 208.905851] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1592 in 0ms
[ 212.776703] init: starting service 'vendor.vibrator-1-0'...
[ 212.802230] init: Service 'vendor.vibrator-1-0' (pid 1595) exited with status 254
[ 212.802271] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1595) process group...
[ 212.802394] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1595 in 0ms
[ 213.001315] init: starting service 'vendor.qcamerasvr'...
[ 213.902319] init: Service 'vendor.qcamerasvr' (pid 1596) exited with status 0
[ 213.902357] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1596) process group...
[ 217.780674] init: starting service 'vendor.vibrator-1-0'...
[ 217.806074] init: Service 'vendor.vibrator-1-0' (pid 1599) exited with status 254
[ 217.806117] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1599) process group...
[ 217.806240] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1599 in 0ms
[ 218.004019] init: starting service 'vendor.qcamerasvr'...
[ 218.901359] init: Service 'vendor.qcamerasvr' (pid 1600) exited with status 0
[ 218.901396] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1600) process group...
[ 218.901527] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1600 in 0ms
[ 222.786430] init: starting service 'vendor.vibrator-1-0'...
[ 222.811058] init: Service 'vendor.vibrator-1-0' (pid 1603) exited with status 254
[ 222.811099] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1603) process group...
[ 222.811226] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1603 in 0ms
[ 223.006032] init: starting service 'vendor.qcamerasvr'...
[ 223.898906] init: Service 'vendor.thermal-engine' (pid 1552) exited with status 1
[ 223.898944] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1552) process group...
[ 223.899078] libprocessgroup: Successfully killed process cgroup uid 0 pid 1552 in 0ms
[ 223.900714] init: starting service 'vendor.thermal-engine'...
[ 223.902610] init: Created socket '/dev/socket/thermal-send-client', mode 666, user 1000, group 1000
[ 223.903092] init: Created socket '/dev/socket/thermal-recv-client', mode 660, user 1000, group 1000
[ 228.008597] init: starting service 'vendor.qcamerasvr'...
[ 228.915628] init: Service 'vendor.qcamerasvr' (pid 1637) exited with status 0
[ 228.915666] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1637) process group...
[ 228.915798] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1637 in 0ms
[ 232.798648] init: starting service 'vendor.vibrator-1-0'...
[ 232.823263] init: Service 'vendor.vibrator-1-0' (pid 1640) exited with status 254
[ 232.823308] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1640) process group...
[ 232.823440] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1640 in 0ms
[ 233.010308] init: starting service 'vendor.qcamerasvr'...
[ 233.914911] init: Service 'vendor.qcamerasvr' (pid 1641) exited with status 0
[ 233.914949] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1641) process group...
[ 233.915081] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1641 in 0ms
[ 237.804058] init: starting service 'vendor.vibrator-1-0'...
[ 237.829001] init: Service 'vendor.vibrator-1-0' (pid 1644) exited with status 254
[ 237.829042] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1644) process group...
[ 237.829165] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1644 in 0ms
[ 238.012987] init: starting service 'vendor.qcamerasvr'...
[ 238.915544] init: Service 'vendor.qcamerasvr' (pid 1645) exited with status 0
[ 238.915591] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1645) process group...
[ 238.915761] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1645 in 0ms
[ 242.809739] init: starting service 'vendor.vibrator-1-0'...
[ 242.834637] init: Service 'vendor.vibrator-1-0' (pid 1648) exited with status 254
[ 242.834677] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1648) process group...
[ 242.834802] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1648 in 0ms
[ 243.015820] init: starting service 'vendor.qcamerasvr'...
[ 243.918478] init: Service 'vendor.qcamerasvr' (pid 1649) exited with status 0
[ 243.918515] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1649) process group...
[ 247.815733] init: starting service 'vendor.vibrator-1-0'...
[ 247.840483] init: Service 'vendor.vibrator-1-0' (pid 1652) exited with status 254
[ 247.840523] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1652) process group...
[ 247.840650] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1652 in 0ms
[ 248.018380] init: starting service 'vendor.qcamerasvr'...
[ 248.927011] init: Service 'vendor.qcamerasvr' (pid 1653) exited with status 0
[ 248.927060] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1653) process group...
[ 248.927207] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1653 in 0ms
[ 252.820748] init: starting service 'vendor.vibrator-1-0'...
[ 252.845539] init: Service 'vendor.vibrator-1-0' (pid 1656) exited with status 254
[ 252.845580] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1656) process group...
[ 252.845702] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1656 in 0ms
[ 253.020508] init: starting service 'vendor.qcamerasvr'...
[ 253.928825] init: Service 'vendor.qcamerasvr' (pid 1657) exited with status 0
[ 253.928864] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1657) process group...
[ 253.928998] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1657 in 0ms
[ 254.045441] init: Service 'vendor.thermal-engine' (pid 1607) exited with status 1
[ 254.045478] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1607) process group...
[ 257.851195] init: Service 'vendor.vibrator-1-0' (pid 1689) exited with status 254
[ 257.851237] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1689) process group...
[ 257.851364] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1689 in 0ms
[ 258.022109] init: starting service 'vendor.qcamerasvr'...
[ 258.923034] init: Service 'vendor.qcamerasvr' (pid 1690) exited with status 0
[ 258.923072] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1690) process group...
[ 258.923206] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1690 in 0ms
[ 262.831285] init: starting service 'vendor.vibrator-1-0'...
[ 262.856223] init: Service 'vendor.vibrator-1-0' (pid 1693) exited with status 254
[ 262.856264] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1693) process group...
[ 263.024105] init: starting service 'vendor.qcamerasvr'...
[ 263.929890] init: Service 'vendor.qcamerasvr' (pid 1694) exited with status 0
[ 263.929928] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1694) process group...
[ 263.930172] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1694 in 0ms
[ 267.837118] init: starting service 'vendor.vibrator-1-0'...
[ 267.862081] init: Service 'vendor.vibrator-1-0' (pid 1697) exited with status 254
[ 267.862120] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1697) process group...
[ 267.862244] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1697 in 0ms
[ 268.026152] init: starting service 'vendor.qcamerasvr'...
[ 268.928076] init: Service 'vendor.qcamerasvr' (pid 1698) exited with status 0
[ 268.928117] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1698) process group...
[ 268.928255] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1698 in 0ms
[ 272.840883] init: starting service 'vendor.vibrator-1-0'...
[ 272.865523] init: Service 'vendor.vibrator-1-0' (pid 1701) exited with status 254
[ 272.865564] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1701) process group...
[ 272.865696] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1701 in 0ms
[ 273.028402] init: starting service 'vendor.qcamerasvr'...
[ 273.925880] init: Service 'vendor.qcamerasvr' (pid 1702) exited with status 0
[ 273.925919] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1702) process group...
[ 277.847029] init: starting service 'vendor.vibrator-1-0'...
[ 277.871844] init: Service 'vendor.vibrator-1-0' (pid 1705) exited with status 254
[ 277.871894] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1705) process group...
[ 277.872066] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1705 in 0ms
[ 278.030897] init: starting service 'vendor.qcamerasvr'...
[ 278.929748] init: Service 'vendor.qcamerasvr' (pid 1706) exited with status 0
[ 278.929801] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1706) process group...
[ 278.929933] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1706 in 0ms
[ 282.850638] init: starting service 'vendor.vibrator-1-0'...
[ 282.875483] init: Service 'vendor.vibrator-1-0' (pid 1709) exited with status 254
[ 282.875523] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1709) process group...
[ 282.875646] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1709 in 0ms
[ 283.033395] init: starting service 'vendor.qcamerasvr'...
[ 283.943889] init: Service 'vendor.qcamerasvr' (pid 1710) exited with status 0
[ 283.943930] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1710) process group...
[ 283.944064] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1710 in 0ms
[ 284.188602] init: Service 'vendor.thermal-engine' (pid 1660) exited with status 1
[ 284.188639] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1660) process group...
[ 287.880949] init: Service 'vendor.vibrator-1-0' (pid 1742) exited with status 254
[ 287.880990] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1742) process group...
[ 287.881120] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1742 in 0ms
[ 288.035871] init: starting service 'vendor.qcamerasvr'...
[ 288.941368] init: Service 'vendor.qcamerasvr' (pid 1743) exited with status 0
[ 288.941406] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1743) process group...
[ 288.941540] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1743 in 0ms
[ 292.861635] init: starting service 'vendor.vibrator-1-0'...
[ 292.886714] init: Service 'vendor.vibrator-1-0' (pid 1746) exited with status 254
[ 292.886754] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1746) process group...
[ 293.037590] init: starting service 'vendor.qcamerasvr'...
[ 293.948614] init: Service 'vendor.qcamerasvr' (pid 1747) exited with status 0
[ 293.948652] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1747) process group...
[ 293.948779] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1747 in 0ms
[ 297.867821] init: starting service 'vendor.vibrator-1-0'...
[ 297.892236] init: Service 'vendor.vibrator-1-0' (pid 1750) exited with status 254
[ 297.892279] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1750) process group...
[ 297.892407] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1750 in 0ms
[ 298.040135] init: starting service 'vendor.qcamerasvr'...
[ 298.942281] init: Service 'vendor.qcamerasvr' (pid 1751) exited with status 0
[ 298.942319] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1751) process group...
[ 298.942448] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1751 in 0ms
[ 302.873435] init: starting service 'vendor.vibrator-1-0'...
[ 302.898409] init: Service 'vendor.vibrator-1-0' (pid 1754) exited with status 254
[ 302.898449] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1754) process group...
[ 302.898582] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1754 in 0ms
[ 303.042419] init: starting service 'vendor.qcamerasvr'...
[ 303.945361] init: Service 'vendor.qcamerasvr' (pid 1755) exited with status 0
[ 303.945400] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1755) process group...
[ 303.945530] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1755 in 0ms
[ 307.879453] init: starting service 'vendor.vibrator-1-0'...
[ 307.903351] init: Service 'vendor.vibrator-1-0' (pid 1758) exited with status 254
[ 307.903392] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1758) process group...
[ 307.903509] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1758 in 0ms
[ 308.045336] init: starting service 'vendor.qcamerasvr'...
[ 308.946326] init: Service 'vendor.qcamerasvr' (pid 1759) exited with status 0
[ 308.946368] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1759) process group...
[ 312.884880] init: starting service 'vendor.vibrator-1-0'...
[ 312.909816] init: Service 'vendor.vibrator-1-0' (pid 1762) exited with status 254
[ 312.909856] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1762) process group...
[ 312.909980] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1762 in 0ms
[ 313.047821] init: starting service 'vendor.qcamerasvr'...
[ 313.970560] init: Service 'vendor.qcamerasvr' (pid 1763) exited with status 0
[ 313.970597] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1763) process group...
[ 313.970726] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1763 in 0ms
[ 314.332807] init: Service 'vendor.thermal-engine' (pid 1713) exited with status 1
[ 314.332847] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1713) process group...
[ 317.890515] init: starting service 'vendor.vibrator-1-0'...
[ 317.914803] init: Service 'vendor.vibrator-1-0' (pid 1795) exited with status 254
[ 317.914844] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1795) process group...
[ 317.914967] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1795 in 0ms
[ 318.049641] init: starting service 'vendor.qcamerasvr'...
[ 318.947186] init: Service 'vendor.qcamerasvr' (pid 1796) exited with status 0
[ 318.947223] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1796) process group...
[ 318.947353] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1796 in 0ms
[ 322.896266] init: starting service 'vendor.vibrator-1-0'...
[ 322.921894] init: Service 'vendor.vibrator-1-0' (pid 1799) exited with status 254
[ 322.921934] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1799) process group...
[ 322.922052] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1799 in 0ms
[ 323.051688] init: starting service 'vendor.qcamerasvr'...
[ 323.955506] init: Service 'vendor.qcamerasvr' (pid 1800) exited with status 0
[ 323.955542] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1800) process group...
[ 323.955678] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1800 in 0ms
[ 327.900963] init: starting service 'vendor.vibrator-1-0'...
[ 327.925399] init: Service 'vendor.vibrator-1-0' (pid 1803) exited with status 254
[ 327.925440] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1803) process group...
[ 328.054248] init: starting service 'vendor.qcamerasvr'...
[ 328.959443] init: Service 'vendor.qcamerasvr' (pid 1805) exited with status 0
[ 328.959479] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1805) process group...
[ 328.959613] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1805 in 0ms
[ 332.906752] init: starting service 'vendor.vibrator-1-0'...
[ 332.931914] init: Service 'vendor.vibrator-1-0' (pid 1809) exited with status 254
[ 332.931967] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1809) process group...
[ 332.932145] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1809 in 0ms
[ 333.055993] init: starting service 'vendor.qcamerasvr'...
[ 333.959453] init: Service 'vendor.qcamerasvr' (pid 1810) exited with status 0
[ 333.959491] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1810) process group...
[ 333.959628] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1810 in 0ms
[ 337.913019] init: starting service 'vendor.vibrator-1-0'...
[ 337.939158] init: Service 'vendor.vibrator-1-0' (pid 1814) exited with status 254
[ 337.939199] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1814) process group...
[ 337.939326] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1814 in 0ms
[ 338.058211] init: starting service 'vendor.qcamerasvr'...
[ 338.958229] init: Service 'vendor.qcamerasvr' (pid 1815) exited with status 0
[ 338.958268] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1815) process group...
[ 342.916029] init: starting service 'vendor.vibrator-1-0'...
[ 342.941277] init: Service 'vendor.vibrator-1-0' (pid 1818) exited with status 254
[ 342.941317] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1818) process group...
[ 342.941438] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1818 in 0ms
[ 343.060302] init: starting service 'vendor.qcamerasvr'...
[ 343.959928] init: Service 'vendor.qcamerasvr' (pid 1819) exited with status 0
[ 343.959967] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1819) process group...
[ 343.960232] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1819 in 0ms
[ 344.475554] init: Service 'vendor.thermal-engine' (pid 1766) exited with status 1
[ 344.475593] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1766) process group...
[ 347.920690] init: starting service 'vendor.vibrator-1-0'...
[ 347.945447] init: Service 'vendor.vibrator-1-0' (pid 1851) exited with status 254
[ 347.945489] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1851) process group...
[ 347.945639] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1851 in 0ms
[ 348.062374] init: starting service 'vendor.qcamerasvr'...
[ 348.960383] init: Service 'vendor.qcamerasvr' (pid 1852) exited with status 0
[ 348.960420] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1852) process group...
[ 348.960556] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1852 in 0ms
[ 352.926497] init: starting service 'vendor.vibrator-1-0'...
[ 352.950746] init: Service 'vendor.vibrator-1-0' (pid 1855) exited with status 254
[ 352.950787] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1855) process group...
[ 352.950913] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1855 in 0ms
[ 353.064596] init: starting service 'vendor.qcamerasvr'...
[ 353.959689] init: Service 'vendor.qcamerasvr' (pid 1856) exited with status 0
[ 353.959727] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1856) process group...
[ 353.959865] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1856 in 0ms
[ 357.930620] init: starting service 'vendor.vibrator-1-0'...
[ 357.956432] init: Service 'vendor.vibrator-1-0' (pid 1859) exited with status 254
[ 357.956474] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1859) process group...
[ 358.066236] init: starting service 'vendor.qcamerasvr'...
[ 358.961810] init: Service 'vendor.qcamerasvr' (pid 1860) exited with status 0
[ 358.961856] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1860) process group...
[ 358.962008] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1860 in 0ms
[ 362.932720] init: starting service 'vendor.vibrator-1-0'...
[ 362.958745] init: Service 'vendor.vibrator-1-0' (pid 1863) exited with status 254
[ 362.958786] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1863) process group...
[ 362.958912] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1863 in 0ms
[ 363.068548] init: starting service 'vendor.qcamerasvr'...
[ 363.966838] init: Service 'vendor.qcamerasvr' (pid 1864) exited with status 0
[ 363.966874] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1864) process group...
[ 363.967006] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1864 in 0ms
[ 367.938998] init: starting service 'vendor.vibrator-1-0'...
[ 367.963494] init: Service 'vendor.vibrator-1-0' (pid 1867) exited with status 254
[ 367.963534] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1867) process group...
[ 367.963661] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1867 in 0ms
[ 368.070349] init: starting service 'vendor.qcamerasvr'...
[ 368.978951] init: Service 'vendor.qcamerasvr' (pid 1868) exited with status 0
[ 368.978989] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1868) process group...
[ 368.979119] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1868 in 0ms
[ 372.945496] init: starting service 'vendor.vibrator-1-0'...
[ 372.970363] init: Service 'vendor.vibrator-1-0' (pid 1872) exited with status 254
[ 372.970404] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1872) process group...
[ 372.970531] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1872 in 0ms
[ 373.072179] init: starting service 'vendor.qcamerasvr'...
[ 373.974708] init: Service 'vendor.qcamerasvr' (pid 1873) exited with status 0
[ 373.974747] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1873) process group...
[ 374.618166] init: Service 'vendor.thermal-engine' (pid 1822) exited with status 1
[ 374.618203] init: Sending signal 9 to service 'vendor.thermal-engine' (pid 1822) process group...
[ 374.618329] libprocessgroup: Successfully killed process cgroup uid 0 pid 1822 in 0ms
[ 374.619658] init: starting service 'vendor.thermal-engine'...
[ 374.621732] init: Created socket '/dev/socket/thermal-send-client', mode 666, user 1000, group 1000
[ 374.622188] init: Created socket '/dev/socket/thermal-recv-client', mode 660, user 1000, group 1000
[ 374.622568] init: Created socket '/dev/socket/thermal-recv-passive-client', mode 666, user 1000, group 1000
[ 374.622942] init: Created socket '/dev/socket/thermal-send-rule', mode 660, user 1000, group 1000
[ 377.950932] init: starting service 'vendor.vibrator-1-0'...
[ 377.975464] init: Service 'vendor.vibrator-1-0' (pid 1905) exited with status 254
[ 382.957069] init: starting service 'vendor.vibrator-1-0'...
[ 382.982209] init: Service 'vendor.vibrator-1-0' (pid 1910) exited with status 254
[ 382.982250] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1910) process group...
[ 382.982366] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1910 in 0ms
[ 383.076129] init: starting service 'vendor.qcamerasvr'...
[ 383.976547] init: Service 'vendor.qcamerasvr' (pid 1911) exited with status 0
[ 383.976585] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1911) process group...
[ 383.976710] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1911 in 0ms
[ 387.960601] init: starting service 'vendor.vibrator-1-0'...
[ 387.985093] init: Service 'vendor.vibrator-1-0' (pid 1914) exited with status 254
[ 387.985133] init: Sending signal 9 to service 'vendor.vibrator-1-0' (pid 1914) process group...
[ 387.985254] libprocessgroup: Successfully killed process cgroup uid 1000 pid 1914 in 0ms
[ 388.077924] init: starting service 'vendor.qcamerasvr'...
[ 388.975980] init: Service 'vendor.qcamerasvr' (pid 1915) exited with status 0
[ 388.976018] init: Sending signal 9 to service 'vendor.qcamerasvr' (pid 1915) process group...
[ 388.976143] libprocessgroup: Successfully killed process cgroup uid 1006 pid 1915 in 0ms
@geckyn
Copy link

geckyn commented May 19, 2020

Hi where you able to determine cause of the bootlooop?

@mvaisakh
Copy link
Author

Yes, it was my vibrator hal, which I already fixed.

@geckyn
Copy link

geckyn commented May 19, 2020

I have similar looking log with no specific cause...even after I imported vibrator driver

@mvaisakh
Copy link
Author

You should remove the vibrator hal from manifest and check if it boots or not.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment