enable on boot nodemanager and adminserver weblogic 12c

after

#enable each service for boot
systemctl enable nodemanager
systemctl enable adminserver

#then reboot and test

middle steps

#start nodemanager service
#start AdminServer manually
#connect to wlst
nmConnect(domainName='<domain>')
connect('<username>','<password>','t3://localhost:7001')
nmEnroll('<domain_home>','<domain_home>/nodemanager')
storeUserConfig()

startAdminServer.py

## put in <domain_home>/nodemanager/startAdminServer.py
nmConnect(domainName='<domain_name>')
nmStart('AdminServer')

stopAdminServer.py

## put in <domain_home>/nodemanager/stopAdminServer.py
nmConnect(domainName='<domain_name>')
connect()
shutdown(force='true')

systemd adminserver.service file

## create new file /etc/systemd/system/adminserver.service for adminserver, then systemctl daemon-reload
[Unit]
Description=Controls Admin Server Lifecycle
After=network.target sshd.service nodemanager.service
Requires=nodemanager.service
           
[Service]
User=<user>
Group=<group>
Type=oneshot
WorkingDirectory=<domain_home>/nodemanager
ExecStart=<orcl_home>/oracle_common/common/bin/wlst.sh startAdminServer.py
ExecStop=<orcl_home>/oracle_common/common/bin/wlst.sh stopAdminServer.py
RemainAfterExit=yes

[Install]
WantedBy=multi-user.target

systemd nodemanager.service file

## create new file /etc/systemd/system/nodemanager.service for nodemanager, then systemctl daemon-reload
[Unit]
Description=Controls Node Manager Lifecycle
After=network.target sshd.service
           
[Service]
User=<user>
Group=<group>
Type=simple
ExecStart=<domain_home>/bin/startNodeManager.sh >/dev/null 2>/dev/null &
ExecStop=<domain_home>/bin/stopNodeManager.sh >/dev/null 2>/dev/null &
PIDFile=<domain_home>/nodamanager/nodemanager.process.id
Restart=on-failure
RestartSec=1
 
[Install]
WantedBy=default.target

weblogic tuning

http://middlewaresnippets.blogspot.com/2015/04/weblogic-server-on-linux-7.html

echo "EDITING /etc/sysctl.conf"
 cat<< EOF >> /etc/sysctl.conf
 
# increase TCP max buffer size (depending on the type of NIC and the round-trip time these values can be changed)
# Maximum TCP Receive Window
net.core.rmem_max = 8388608
net.core.rmem_default = 8388608
# Maximum TCP Send Window
net.core.wmem_max = 8388608
net.core.wmem_default = 8388608
#  memory reserved for TCP receive buffers (vector of 3 integers: [min, default, max])
net.ipv4.tcp_rmem = 4096 87380 8388608
# memory reserved for TCP send buffers (vector of 3 integers: [min, default, max])
net.ipv4.tcp_wmem = 4096 87380 8388608
 
# increase the length of the processor input queue
net.core.netdev_max_backlog = 30000
# maximum amount of memory buffers (could be set equal to net.core.rmem_max and net.core.wmem_max)
net.core.optmem_max = 20480
# socket of the listen backlog
net.core.somaxconn = 1024
 
# tcp selective acknowledgements (disable them on high-speed networks)
net.ipv4.tcp_sack = 1
net.ipv4.tcp_dsack = 1
# Timestamps add 12 bytes to the TCP header
net.ipv4.tcp_timestamps = 1
# Support for large TCP Windows - Needs to be set to 1 if the Max TCP Window is over 65535
net.ipv4.tcp_window_scaling = 1
# The interval between the last data packet sent (simple ACKs are not considered data) and the first keepalive probe
net.ipv4.tcp_keepalive_time = 1800
# The interval between subsequential keepalive probes, regardless of what the connection has exchanged in the meantime
net.ipv4.tcp_keepalive_intvl = 30
# The number of unacknowledged probes to send before considering the connection dead and notifying the application layer
net.ipv4.tcp_keepalive_probes = 5
# The time that must elapse before TCP/IP can release a closed connection and reuse its resources.
net.ipv4.tcp_fin_timeout = 30
# Size of the backlog connections queue.
net.ipv4.tcp_max_syn_backlog = 4096
# The tcp_tw_reuse setting is particularly useful in environments where numerous short connections are open and left in TIME_WAIT state, such as web servers.
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_tw_recycle = 1
 
# The percentage of how aggressively memory pages are swapped to disk
vm.swappiness = 0
# The percentage of main memory the pdflush daemon should write data out to the disk.
vm.dirty_background_ratio = 25
# The percentage of main memory the actual disk writes will take place.
vm.dirty_ratio = 20
 
# set the number of huge pages based on the Hugepagesize, i.e., 2048kB
#vm.nr_hugepages = ${NUMBER_OF_HUGE_PAGES}
 
# give permission to the group that runs the process to access the shared memory segment
# to this end open the /etc/group file and retrieve the group-id
#vm.hugetlb_shm_group = ${GROUP_ID}
EOF

I'm having difficult to configure Node Manager and AdminServer work on 10.0.1.141. I found nmConnect(domainName='<domain_name>') using default node manager listen 127.0.0.1:5556 to locate node manager service.

Did you change <domain_name> for the actual domain path?