Minor changes to statsd installation

setup-statsd.sh

# install git
sudo apt-get install g++ curl libssl-dev apache2-utils
sudo apt-get install git-core

mkdir ~/src
cd ~/src

# uncomment to disable SSL CA verification for the git clone step(s)
# export GIT_SSL_NO_VERIFY=1

# download the Node source, compile and install it
git clone https://github.com/joyent/node.git

cd node
./configure
make
sudo make install

# install the Node package manager for later use
cd ~/src
curl http://npmjs.org/install.sh | sudo sh

# clone the statsd project
cd ~/src
git clone https://github.com/etsy/statsd.git

# download everything for graphite
mkdir ~/src/graphite
cd ~/src/graphite
wget http://launchpad.net/graphite/trunk/0.9.7/+download/graphite-web-0.9.7c.tar.gz
wget http://launchpad.net/graphite/trunk/0.9.7/+download/carbon-0.9.7.tar.gz 
wget http://launchpad.net/graphite/trunk/0.9.7/+download/whisper-0.9.7.tar.gz
tar xzvf whisper-0.9.7.tar.gz 
tar xzvf carbon-0.9.7.tar.gz 
tar xzvf graphite-web-0.9.7c.tar.gz

# install whisper - Graphite's DB system
cd ~/src/graphite/whisper-0.9.7
sudo python setup.py install

# install carbon - the Graphite back-end
cd ~/src/graphite/carbon-0.9.7
sudo mkdir /opt/graphite
sudo chmod 777 /opt/graphite
python setup.py install
cd /opt/graphite/conf
cp carbon.conf.example carbon.conf
# copy the example schema configuration file, and then configure the schema
# see: http://graphite.wikidot.com/getting-your-data-into-graphite
cp storage-schemas.conf.example storage-schemas.conf

# install other graphite dependencies
sudo apt-get install python-cairo
sudo apt-get install python-django
sudo apt-get install memcached
sudo apt-get install python-memcache
sudo apt-get install python-ldap
sudo apt-get install python-twisted
sudo apt-get install apache2 libapache2-mod-python

#install graphite
cd ~/src/graphite/graphite-web-0.9.7c
python setup.py install

# copy the graphite vhost example to available sites, edit it to you satisfaction, then link it from sites-enabled
sudo cp examples/example-graphite-vhost.conf /etc/apache2/sites-available/graphite.conf
sudo ln -s /etc/apache2/sites-available/graphite.conf /etc/apache2/sites-enabled/graphite.conf
sudo rm /etc/apache2/sites-enabled/000-default
sudo apache2ctl restart
# I had to create these log files manually 
cd /opt/graphite/storage/log/webapp
touch info.log
chmod 777 info.log
touch exception.log
chmod 777 exception.log

# run syncdb to setup the db and prime the authentication model (if you're using the DB model)
cd /opt/graphite/webapp/graphite
sudo python manage.py syncdb

# make sure to change ownership of the storage folder to the Apache user/group - mine was www-data
sudo chown -R www-data:www-data /opt/graphite/storage/

# copy the local_settings example file to creating the app's settings
# this is where both carbon federation and authentication is configured
cp local_settings.py.example local_settings.py

# start the carbon cache
sudo /opt/graphite/bin/carbon-cache.py start

# copy the the statsd config example to create the config file
# unless you used non-default ports for some other feature of the system, the defaults in the config file are fine
#cd ~/src/statsd
#cp exampleConfig.js local.js

# start statsd
#node stats.js local.js