aws ecs login script

sssh

#!/bin/bash

############################################################################
#   Copyright 2022 Yuki Adachi https://github.com/yuki777
#
#   Licensed under the Apache License, Version 2.0 (the "License");
#   you may not use this file except in compliance with the License.
#   You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
#   Unless required by applicable law or agreed to in writing, software
#   distributed under the License is distributed on an "AS IS" BASIS,
#   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
#   See the License for the specific language governing permissions and
#   limitations under the License.
############################################################################

# Bash script to run ecs-exec on Amazon ECS Fargate containers.
#
# Usage: See --help.
#
# Installation: Download the script and `chmod u+x the script`.
#  curl https://gist.githubusercontent.com/yuki777/640cba3e0a68587c36165b8a87d25390/raw/77ec8f3ca3a5bc8808cc8f28bc3fa345fe924599/sssh -o sssh && chmod u+x sssh
#  ./sssh
#
# Prerequisites (validated)
# - aws cli
# - session-manager-plugin
# - jq
#
# Special thanks to contributor
# - leewc

set -eu

selectProfile(){
  # profile parameter not supplied.
  if [ -z ${profile+x} ]; then
    # only works with AWS CLIv2.
    select selected in `aws configure list-profiles`
    do
      break
    done
    echo $selected
  else
    echo $profile
  fi
}

params(){
  echo "$(profileParam) $(regionParam)"
}

profileParam() {
  [[ $profile ]] &>/dev/null && echo "--profile $profile"
}

regionParam() {
  [[ $region ]] &>/dev/null && echo "--region $region"
}

selectCluster(){
  select selected in $(aws ecs list-clusters $(params)|jq -r ".clusterArns[]"|sort|cut -d "/" -f 2)
  do
    break
  done
  echo $selected
}

selectService(){
  select selected in $(aws ecs list-services $(params) --cluster $cluster|jq -r ".serviceArns[]"|sort)
  do
    break
  done
  echo $selected
}

selectTask(){
  select selected in $(aws ecs list-tasks $(params) --cluster $cluster --service-name $service --desired-status RUNNING |jq -r '.taskArns[]'|sort)
  do
    break
  done
  echo $selected
}

selectContainer(){
  select selected in $(aws ecs describe-tasks $(params) --cluster $cluster --tasks $task | jq -r ".tasks[].containers[].name"|sort)
  do
    break
  done
  echo $selected
}

colorEcho(){
  red='\033[0;31m'
  green='\033[0;32m'
  yellow='\033[0;33m'
  reset='\033[0m'

  if echo $@ | egrep -q "prd|prod|production"; then
    color=$red
  elif echo $@ | egrep -q "stg|stage|staging|beta|devo"; then
    color=$yellow
  else
    color=$green
  fi

  echo -e "${color}$@${reset}"
}

echo_stderr() {
  echo -e "$@" >&2
}

die() {
  echo_stderr "$@"
  exit 1
}

validatePrereq() {
  command -v jq  &>/dev/null || die "jq not installed on host. Please install jq. See https://stedolan.github.io/jq/download/"
  command -v session-manager-plugin &>/dev/null || die "session-manager-plugin not installed. See 
https://docs.aws.amazon.com/systems-manager/latest/userguide/session-manager-working-with-install-plugin.html"
  command -v aws &>/dev/null || die "AWS CLI not found, AWS CLI version 1.16.12 or later must be installed. See https://docs.aws.amazon.com/cli/latest/userguide/getting-started-install.html"
  # Checks if AWS CLI is outdated or not., v1 of AWS CLI pipes to std error, redirect
  AWS_CLI_VERSION=$(aws --version 2>&1 | awk '{ print $1 }' | cut -d/ -f2)
  echo_stderr "You have AWS CLI v$AWS_CLI_VERSION installed."
  # Do a best effort check for v1 (so that it's at least 1.10 and up.
  [[ $AWS_CLI_VERSION =~ ^1.1[0-9] || $AWS_CLI_VERSION =~ ^2 ]] &>/dev/null || die "AWS CLI version 1.16.12 or later must be installed to support ecs-exec, Run 'aws --version' to see what you 
have. See https://docs.aws.amazon.com/cli/latest/userguide/getting-started-install.html"
}

function print_help() {
  cat >&2 <<-END

This script simplifies the process of getting the required information to drop into an
interactive shell script on your container hosted on Fargate/ECS.

Example:

./sssh --region us-west-2
./sssh --profile default

Supported input parameters:
 -r | --region     : AWS Region to fetch the cluster, service, task
 -p | --profile    : AWS Profile for credentials and region.
 -c | --command    : Command to execute, defaults to '/bin/sh'/
      --port       : Port number for port forward.
      --local-port : Local port number for port forward.

The default command executed on the selected container is '/bin/sh'.
If a region is not provided, the script will attempt to use your region set in the profile.
If you want to execute a different command or shell, you can pass it in like so:

./sssh --command '/bin/bash'

You need active (unexpired) AWS credentials, otherwise, the script will crash.

Updates on https://gist.githubusercontent.com/leewc/e4c3a16551b06c2b0b4640fa5a3d9c00

END
}

main(){
  command='/bin/sh'
  while [[ "$#" -gt 0 ]]; do
    case $1 in
      -h|--help)
        print_help
        exit
        ;;
      -r|--region)
        shift
        region="${1:?Region must be specified in --region}"
        shift
        ;;
      -p|--profile)
        shift
        profile="${1:?Profile must be specified in --profile}"
        shift
        ;;
      -c|--command)
        shift
        command="${1:?Command must be specified in --command}"
        shift
        ;;
      --port)
        shift
        port="${1:?port must be specified in --port}"
        shift
        ;;
      --host()
        shift
        host="${1:?host must be specified in --host}"
        shift
      --local-port)
        shift
        localPort="${1:?local-port must be specified in --local-port}"
        shift
        ;;
      *)
        die "Unknown param $1"
        ;;
    esac
  done

  echo_stderr "Validating pre-requisites...."
  validatePrereq

  # spaces matter :)
  if [[ $AWS_CLI_VERSION =~ ^2 ]] ; then
    echo_stderr "Select AWS Profile."
    profile=`selectProfile`
    colorEcho profile: $profile
  else echo_stderr "[INFO] AWS CLI is not v2, unable to select profile. --region or --profile must be set."
  fi
  echo_stderr

  echo_stderr "Select cluster."
  cluster=`selectCluster`
  colorEcho cluster: $cluster
  echo_stderr

  echo_stderr "Select service."
  service=`selectService`
  colorEcho service: $service
  echo_stderr

  echo_stderr "Select task."
  task=`selectTask`
  colorEcho task: $task
  echo_stderr

  echo_stderr "Select container."
  container=`selectContainer`
  colorEcho container: $container
  echo_stderr

  # Both port and localPort parameters are not supplied.
  if [ -z ${port+x} ] && [ -z ${localPort+x} ]; then
    cmd="aws ecs execute-command $(params) --cluster $cluster --container $container --task $task --interactive --command '$command'"
  else
    taskId=$(echo $task | awk -F '/' '{print $3}')
    containerId=$(aws ecs describe-tasks $(params) --cluster $cluster --task $task | jq -r --arg container $container '.tasks[0].containers[] | select(.name == $container).runtimeId')
    cmd="aws ssm start-session --target ecs:${cluster}_${taskId}_${containerId} --document-name AWS-StartPortForwardingSessionToRemoteHost --parameters 
{\"portNumber\":[\"$port\"],\"localPortNumber\":[\"$localPort\"],\"host\":[\"$host\"]} --debug"
  fi

  colorEcho $cmd
  $cmd
}

# Execute main function and pass all params over
main $@